Synthesis of highly faceted pentagonal- and hexagonal-shaped gold nanoparticles with controlled sizes by sodium dodecyl sulfate

We report the synthesis of pentagonal- and hexagonal-shaped gold nanoparticles with controlled diameters ranging from 5 to 50 nm. These nanoparticles were prepared by a seeding growth approach. Sodium dodecyl sulfate (SDS) molecules served as the capping agent to restrict the particle size. In addition, the formation of highly faceted gold nanoparticles may be facilitated by the possibly ineffective capping interactions between the lamellar micellar structures formed by the SDS molecules and the gold nanoparticles. The crystal structure of the highly faceted particles was found to consist of mostly [111] surfaces as particle size increases, as revealed by both TEM and XRD results.     

Composition/structural evolution and optical properties of ZnO/Zn nanoparticles by laser ablation in liquid media

We present composition-controlled synthesis of ZnO-Zn composite nanoparticles by laser ablation of a zinc metal target in pure water or in aqueous solution of sodium dodecyl sulfate (SDS). By SDS concentration, composition and size of the nanoparticles can be controlled in a wide range. Relative amounts of the components Zn and ZnO, the particle size, and the microstructure can evolve with SDS concentration in solution. High SDS concentration corresponds to high relative amount of Zn nanoparticles existing as the core in the core/shell nanostructures, whereas low SDS concentration leads to high ZnO amount. This was explained by a dynamic mechanism on the basis of the competition between aqueous oxidation and SDS capping protection. Correspondingly, optical absorption spectra evolve from the excitonic peak of ZnO (about 350 nm) to the Zn surface plasmon resonance (about 242 nm) with rise of SDS concentration. A blue (about 450 nm) photoluminescence was observed in the obtained ZnO nanoparticles, which was attributed to existence of interstitial zinc in ZnO lattices. This study has revealed that laser ablation of active metal in liquid media is an appropriate method to synthesize a series of metal oxide semiconductor-metal composite nanoparticles with controlled composition and size.     

Nanoparticle formation of poorly water-soluble drugs from ternary ground mixtures with PVP and SDS

Poorly water-soluble drugs N-5159, griseofulvin (GFV), glibenclamide (GBM) and nifedipine (NFP) were ground in a dry process with polyvinylpyrrolidone (PVP) and sodium dodecyl sulfate (SDS). Different crystallinity behavior of each drug during grinding was shown in the ternary Drug/PVP/SDS system. However, when each ternary Drug/PVP/SDS ground mixture was added to distilled water, crystalline nanoparticles which were 200 nm or less in size were formed and had excellent stability. Zeta potential measurement suggested that the nanoparticles had a structure where SDS was adsorbed onto the particles that were formed by the adsorption of PVP on the surface of drug crystals. Stable existence of crystalline nanoparticles was attributable to the inhibition of aggregation caused by the adsorption of PVP and SDS on the surface of drug crystals. Furthermore, the electrostatic repulsion due to the negative charge of SDS on a shell of nanoparticles could be assumed to contribute to the stable dispersion.     

Effect of polyvinylpyrrolidone as capping agent on Ce3+ doped flowerlike ZnS nanostructure

Nanoparticles of zinc sulfide doped with Ce³⁺ have been synthesized through a simple chemical precipitation method utilizing optimum dopant concentration (1.5 g) and employing various concentrations of polyvinylpyrrolidone (PVP, M.W: 40,000) as capping agent. The optical properties of the synthesized products were studied by UV–Vis absorption and photoluminescence measurements. The phase and size of the products were predicted by X-ray diffraction data. The existence of functional groups in the synthesized products was identified by Fourier transform infrared spectroscopy. Field emission scanning electron microscope results of Ce³⁺ doped ZnS show a uniform growth pattern of the nanorods with flowerlike structure. However, on surfactant assisted Ce³⁺ doped ZnS nanoparticles, the morphology of the products was changed from rod to spherical particles. The morphologies of the uncapped and PVP capped ZnS nanocrystals were confirmed by high resolution transmission electron microscopy.     

以SDS-PVP项链状软团簇为模板简易一锅法合成Cu2O中空亚微球

在SDS-PVP水溶液中采用N2H4•H2O还原CuSO4, 在pH (10±0.5), (40±1.0) ℃条件下反应55 min得到橙色Cu2O溶胶, 离心分离产物经XRD鉴定为Cu2O立方晶系晶体; SEM和TEM表明该法获得的晶体为形状规整、粒径分布窄的Cu2O中空亚微球, 并证实系由大量10 nm量级的原级Cu2O纳米晶粒组装而成. 根据实验事实推断, SDS-PVP项链状软团簇提供了“双重软模板”功能, 借助独特的“模板诱导两级组装”作用一锅法合成了Cu2O中空亚微球. Cu2O中空亚微球生长的可能途径为: 首先, 项链状软团簇中的SDS束缚胶束作为第一重软模板, 诱导一级组装10 nm量级的原级Cu2O纳米晶粒; 然后, 软团簇中立体桥联SDS束缚胶束的PVP链节作为第二重软模板, 诱导一定空间范围内的原级Cu2O纳米晶粒长大并进一步聚集/二级组装, 经一锅法合成得到次级Cu2O中空亚微球. 实验结果证明该一锅法温和、简便、快捷, Cu2O中空亚微球的粒径分布窄.     

Synthesis of size-controlled and shaped copper nanoparticles

The synthesis of stable, monodisperse, shaped copper nanoparticles has been difficult, partially because of copper's propensity for oxidation. This article reports the findings of an investigation of a synthetic route for the synthesis of size-controllable and potentially shape-controllable molecularly capped copper nanoparticles. The approach involved the manipulation of reaction temperature for the synthesis of copper nanoparticles in organic solvents in the presence of amine and acid capping agents. By manipulating the reaction temperature, this route has been demonstrated for the production of copper nanoparticles ranging from 5 to 25 nm. The size dependence of the melting temperature of copper nanoparticles, especially for surface melting, is believed to play an important role in interparticle coalescence, leading to size growth as the reaction temperature is increased. Control of the reaction temperature and capping molecules has also been demonstrated to produce copper nanoparticles with different shapes such as rods and cubes. The previously proposed combination of the selective formation of a seed precursor and a selective growth direction due to the preferential adsorption of capping agents on certain nanocrystal facets is believed to be responsible for shape formation by kinetically controlling the growth rates of crystal facets. The nanoparticles are characterized using TEM, XRD, and UV-visible techniques. A mechanistic consideration of the size control and shape formation is also discussed.     

Formation of Cu and Cu2O nanoparticles by variation of the surface ligand: preparation, structure, and insulating-to-metallic transition

Copper and copper (I) oxide nanoparticles protected by self-assembled monolayers of thiol, carboxyl, and amine functionalities [X(CH(2))(n)-CH(3), where X can be -COOH, -NH(2), or -SH] have been prepared by the controlled reduction of aqueous copper salts using Brust synthesis. The optical absorption spectrum (lambda(max)=289 nm) is found to be invariant with the nature of the capping molecule while the particle shape and distribution are found to depend strongly on it. A comparison of the protection efficiency for different capping agents such as dodecanethiol (DDT), tridecylamine (TDA), and lauric acid (LA) suggests that although zerovalent Cu is initially formed for dodecanethiol, all other cases allow oxidation to Cu(2)O nanoparticles. Despite the variation in particle size and relative stability, nanoparticles have been found to form oxides after a few days, especially for the case of LA and TDA surface capping. For all the samples studied, the size has been found to be 4-8 nm by high-resolution transmission electron microscopy. The protective ability is found to be better for dodecanethiol SAM (similar to the case of Au and Ag nanoparticles), while the order of capping efficiency varies as Cu-DDT>Cu-TDA>Cu-LA. In the present study we also demonstrate a reversible metal-insulator transition (MIT) in capped nanoparticles of Cu using temperature-dependent electrical resistivity measurement. However, the LA-capped sample does not show any such transition, possibly due to the oxide formation.     

Role of stabilizing agents in the formation of stable silver nanoparticles in aqueous solution: Characterization and stability study

The stability of silver nanoparticles is controlled mainly by two major factors, namely, aggregation and oxidation. In the present study, silver nanoparticles were synthesized by using different series of reducing agents like a strong reducing agent (sodium borohydride), a mild reducing agent (tri-sodium citrate), and a weak reducing agent (glucose) with different capping agents, namely, polyvinyl pyrrolidone (PVP K 30), starch, and sodium carboxyl methyl cellulose (NaCMC). The synthesized silver nanoparticles were characterized by UV-Visible absorption spectroscopy, dynamic light scattering (DLS), atomic force microscopy (AFM), and anti-microbial activity. The particle size of silver nanoparticles varies in the following order: sodium borohydride < tri-sodium citrate < glucose. Combination of sodium borohydride–polyvinyl pyrrolidone and tri-sodium citrate-polyvinyl pyrrolidone yields stable silver nanoparticles compared to other combinations of reducing agents and capping agents. The stability results confirmed that a refrigerated condition (8°C) was more suitable for storage of silver nanoparticles. Anti-microbial activity of silver nanoparticles synthesized in a sodium borohydride–polyvinyl pyrrolidone mixture shows a larger zone of inhibition compared to other silver nanoparticles. Anti-microbial results confirmed that the anti-microbial activity is better with smaller particle size. The size and stability of silver nanoparticles in the presence of different combinations of stabilizing and capping agents are reported.     

Photo-physical studies of pyridine capped ZnO nanostructures

Pyridine capped ZnO nanocrystals with different sizes were synthesized at room temperature by wet chemical synthesis. Pyridine provides the control over the morphology of final product. X-ray study confirms the crystalline hexagonal structure of the capped and uncapped ZnO nanocrystals. The particle size was found to decrease with increase in capping concentration. Electron microscopy investigation reveals the uniform morphology of the product. Optical absorption studies indicate the blue shift effect for pyridine capped ZnO as compare to uncapped ZnO.     

Morphology and size-controlled synthesis of silver nanoparticles in aqueous surfactant polymer solutions

We have employed a number of reducing and capping agents to obtain Ag(0) metallic nanoparticles of various sizes and morphologies. The size and morphology were tuned by selecting reducing and capping agents. Spherical particles of 15 and 43 nm diameter were obtained when 1 wt% aqueous starch solution of AgNO₃ precursor salt was reduced by d(+)-glucose and NaOH, respectively, on heating at 70 °C for 30 min. Smaller size particles obtained in the case of d(+)-glucose reduction has been attributed to the slow reduction rate by mild reducing agent d(+)-glucose compared to strong NaOH. Conducting the reduction at ambient temperature of silver salt in liquid crystalline pluronic P123 and L64 also gave spherical particles of 8 and 24 nm, respectively, without the addition of any separate reducing agent. NaOH reduction of salt in ethylene glycol (11 g)/polyvinyl pyrolidone (PVP; 0.053 g) mixture produced large self-assembled cubes of 520 nm when smaller (26–53 nm) star-shaped sharp-edged structures formed initially aggregated on heating the preparation at 190 °C for 1 h. Increasing the amount of PVP (0.5 g) in ethylene glycol (11 g) and heating at 70 °C for 30 min yielded a mixture of spherical and non-spherical (cubes, hexagons, pentagons, and triangle) particles without the addition of an extra reducing agent. Addition of 5 wt% PVP to 1 wt% aqueous starched solution resulted in the formation of a mixture of spherical and anisotropic structures when solution heated at 70 °C for 1 h. Homogeneous smaller sized (29 nm) cubes were synthesized by NaOH reduction of AgNO₃ in 12.5 wt% of water-soluble polymer poly(methyl vinyl ether) at ambient temperature in 30 min reaction time.     

Poly(ethylene oxide)–poly(ethylene imine) block copolymers as templates and catalysts for the in situ formation of monodisperse silica nanospheres

Block copolymers based on poly(ethylene oxide) (PEO) and poly(ethylene imine) (PEI) are efficient catalysts/templates for the formation of uniform silica nanoparticles. Addition of tetraethylorthosilicate to a solution of PEO–PEI or PEI–PEO–PEI block copolymers results in the formation of silica particles with a diameter of ca. 30 nm and narrow size distribution. The particles precipitated with the diblock copolymers can be redispersed in water after isolation as individual nanoparticles. Evidently, block copolymers based on PEO and PEI serve as excellent templates for the biomimetic and “soft” synthesis of silica nanoparticles.

Size control of semimetal bismuth nanoparticles and the UV-visible and IR absorption spectra

We introduced a simple chemical method to synthesize semimetal bismuth nanoparticles in N,N-dimethylformamide (DMF) by reducing Bi(3+) with sodium borohydride (NaBH(4)) in the presence of poly(vinylpyrroldone) (PVP) at room temperature. The size and dispersibility of Bi nanoparticles can be easily controlled by changing the synthetic conditions such as the molar ratio of PVP to BiCl(3) and the concentration of BiCl(3). The UV-visible absorption spectra of Bi nanoparticles of different diameters are systematically studied. The surface plasmon peaks broaden with the increasing molar ratio of PVP to BiCl(3) as the size of bismuth nanoparticles decreases. Infrared (IR) spectra of the complexes with different molar ratios of PVP/BiCl(3) show a strong interaction between the carboxyl oxygen (C=O) of PVP and Bi(3+) ion and a weak interaction between the carboxyl oxygen (C=O) of PVP and the Bi atom in nanoparticles. This indicates that PVP serves as an effective capping ligand, which prevents the nanoparticles from aggregation.     

The Influence of the Capping Agent on the Oxidation of Silver Nanoparticles: Nano‐impacts versus Stripping Voltammetry

The influence of capping agents on the oxidation of silver nanoparticles was studied by using the electrochemical techniques of anodic stripping voltammetry and anodic particle coulometry (“nano‐impacts”). Five spherical silver nanoparticles each with a different capping agent (branched polyethylenimine (BPEI), citrate, lipoic acid, polyethylene glycol (PEG) and polyvinylpyrrolidone (PVP)) were used to perform comparative experiments. In all cases, regardless of the capping agent, complete oxidation of the single nanoparticles was seen in anodic particle coulometry. The successful quantitative detection of the silver nanoparticle size displays the potential application of anodic particle coulometry for nanoparticle characterisation. In contrast, for anodic stripping voltammetry using nanoparticles drop casting, it was observed that the capping agent has a very significant effect on the extent of silver oxidation. All five samples gave a low oxidative charge corresponding to partial oxidation. It is concluded that the use of anodic stripping voltammetry to quantify nanoparticles is unreliable, and this is attributed to nanoparticle aggregation.     

Microwave-Assisted Green Synthesis of Gold Nanoparticles Using Olibanum Gum (Boswellia serrate) and its Catalytic Reduction of 4-Nitrophenol and Hexacyanoferrate (III) by Sodium Borohydride

In this work we report straightforward, an economically viable, one-step microwave-assisted green synthesis of well stabilized gold nanoparticles (AuNPs) by reducing chloroauric acid with natural water soluble olibanum gum (Boswellia serrate). The olibanum gum acts as a dual role of reducing and capping agent for synthesis of AuNPs. The formation of AuNPs was confirmed using UV–Vis spectroscopy, Fourier transform infrared spectroscopy, X-ray diffraction, transmission electron microscopy and electron diffraction. The results indicated that the synthesized NPs were well dispersed and spherical in shape had an average diameter of 3 ± 2 nm. The reaction parameters significantly affected the formation of NPs, as the concentration of gum and irradiation time increases the formation of NPs particles increases and size of particles are reduced. In addition, it has been shown that these olibanum gum capped AuNPs functioned as effective homogeneous catalyst for the reduction of two model reactions hexacyanoferrate(III) and 4-nitrophenol by sodium borohydride. The kinetic investigations were carried out at different amount of AuNPs and different temperatures.     

Probing the interaction of poly(vinylpyrrolidone) with platinum nanocrystals by UV-Raman and FTIR

The vibrational spectra of platinum nanoparticles (2.4-9 nm) capped with poly(N-vinylpyrrolidone) (PVP) were investigated by deep UV-Raman and FTIR spectroscopy and compared with those of pure PVP. Raman spectra of PVP/Pt show selective enhancement of C=O, C-N, and CH2 vibrational modes attributed to the pyrrolidone ring. Selective enhancement of ring vibrations is attributed both to the resonance Raman effect and SERS chemical enhancement. A red shift of the PVP carbonyl frequency on the order of 60 cm-1 indicates the formation of strong >C=O-Pt bonds. It is concluded that PVP adheres to the nanoparticles through a charge-transfer interaction between the pyrrolidone rings and surface Pt atoms. Heating the Pt nanoparticles under reducing conditions initiates the decomposition of the capping agent, PVP, at a temperature 100 degrees C below that of pure PVP. Under oxidizing conditions, both PVP/Pt and PVP degrade to form amorphous carbon.     

One‐pot dual size‐ and shape selective synthesis of tetrahedral Pt nanoparticles

One‐pot dual size‐ and shape‐selective synthesis of tetrahedral Pt nanoparticles is achieved using the pre‐prepared Pt nanoparticles as the ‘external seeds’, and controlling the slow diffusional growth under hydrogen reduction in the presence of PVP as the capping agent. Copyright © 2006 John Wiley & Sons, Ltd.     

Influence of Surfactant-polymer Complexes on Crystallization and Aggregation of CaCO3

Hollow calcium carbonate(CaCO₃) microspheres with different morphologies were synthesized via the precipitation reaction of calcium chloride with sodium carbonate in the presence of different surfactant-polymer complexes. The selected anionic surfactants were sodium dodecyl sulfonate(SDS) and sodium dodecyl benzenesulfonate(SDBS), respectively. The selected water-soluble polymers were polyacrylic acid(PAA) and polyvinyl pyrrolidone(PVP). In this work, SDS-PVP “pearl-necklace model” micellar complex was formed via hydrophobic effectiveness between SDS and PVP and it served as the spherical template to generate spherical CaCO₃ aggregates with hollow microspheres composed of about 500 nm irregular shaped particles. SDS-PAA complexes and SDBS-PAA complexes formed “core-shell model” aggregates with calcium ions serving as the medium to link the anionic surfactant and the polymer. SDS-PAA “core-shell model” aggregates would act as templates for hollow CaCO₃ microspheres consisting of 30-50 nm irregular shaped crystallites. SDBS-PAA “core-shell model” aggregates served as the spherical aggregate templates to generate spherical CaCO₃ aggregates consisted of many small spherical particles which had grown together. All the obtained CaCO₃ hollow microspheres are calcite particles. This research may provide new insight into the control of morphologies of hollow CaCO₃ microspheres in the presence of surfactant- polymer complexes.     

Controlled growth of ZnO nanorod templates and TiO<Subscript>2</Subscript> nanotube arrays by using porous TiO<Subscript>2</Subscript> film as mask

Silver nanoparticles well dispersed in a spherical Poly(vinylpyrollidone)(PVP) matrix were simply prepared by spray pyrolysis of aqueous solutions of AgNO₃ and PVP without any reducing agent. Highly monodisperse silver particles were obtained above the initial mass ratio of PVP/AgNO₃ ∼ 1 and in a certain narrow temperature range. Below the critical mass ratio the silver particles grew to larger ones polydispersely. As the ratio increased above it, they became smaller maintaining their monodispersity. The use of PVP considerably decreased the reduction temperature of the silver nitrate from 450 °C to 250 °C under the same pyrolysis conditions, due to its reducing nature. As the pyrolysis temperature increased above the decomposition temperature of PVP, the silver particles in the matrix grew to merge to a single particle while their crystallite size did not increase as much. The spherical assemblies of the silver nanoparticles were hardly disengaged even after severe washing off the matrix materials. The mechanism of the nanoparticle growth was also discussed.     

银纳米颗粒的制备及表征

用鞣酸还原法制得了PVP保护的Ag纳米颗粒,并通过TEM、XRD、TG、DTA及FT IR对其结构进行了表征.结果表明在所选择的实验条件下制备了粒径小、单分散且化学稳定的Ag PVP纳米颗粒,其粒径约10nm,有良好的水分散性.PVP的加入和银氨络离子的形成对制备出小尺寸纳米银起了重要作用.     

Poly(N-vinyl-2-pyrrolidone) (PVP)-capped dendritic gold nanoparticles by a one-step hydrothermal route and their high SERS effect

Dendritic gold (Au) nanoparticles have been successfully synthesized by the one-step hydrothermal reduction of HAuCl4.4H2O using ammonium formate (AF) as a reducing agent in the presence of PVP. Effects of different reactant concentrations on the morphologies of obtained products have been systematically investigated. On the basis of the morphologies of the products observed by transmission electron microscopy (TEM) and scanning electron microscopy (SEM), it has been found that an excessive number of AF molecules are the origin of the dendritic Au particles besides PVP as a stabilizer. AF molecules serve not only as a reductant but probably also as a capping reagent. The study implies that the use of two or more capping reagents with different adsorption abilities will be beneficial to the formation of hyperbranched Au nanoparticles. The new finding will have the potential to be extended to the construction of other highly branched noble metal nanoparticles only by one-step synthesis. In addition, as an example, application of the dendritic particles as an active material in surface-enhanced Raman scattering has been investigated by employing 4-aminothiophenol molecules as a probe.