Hydrolytically stable linkers for silicone carbohydrates derived from hydrodiisopropylsilanes

Two strategies were developed for the attachment of sugars to siloxanes using bifunctional silicon linkers: the substrate could be functionalized with a silyl hydride before coupling to a vinyl-terminated siloxane through platinum catalyzed hydrosilylation; alternatively, unprotected glucose could be directly silylated by a silicone terminated with a chlorosilyl group. Optimal steric bulk was found with difunctional diisopropylsilanes, which exhibit excellent reactivity for preparation of sugarsilane derivatives, and also permit efficient grafting to silicones via hydrosilylation. The resulting product alkoxysilane-silicone exhibits greater stability to hydrolysis than the silicone itself.     

Determination of cyclic and linear siloxanes in soil samples by ultrasonic-assisted extraction and gas chromatography-mass spectrometry

A rapid method, based on sonication-assisted extraction in small columns (SAESC) and subsequent quantification and identification by gas chromatography-mass spectrometry (GC-MS), was developed for the determination of cyclic and linear siloxanes in soil. In the experiments with spiked samples (10-50 ng g(-1)), the recovery of cyclic and linear siloxanes ranged from 87.7 to 108.0% and from 84.9 to 107.6%, respectively. The validated method was used to determine the levels of these compounds in various types of soil samples collected from different locations in Spain. The cyclic siloxanes, decamethylcyclopentasiloxane (D5) and dodecamethylcyclohexasiloxane (D6) were detected in all the soil samples analyzed at concentrations from 9.2 to 56.9 ng g(-1) for D5 and from 5.8 to 27.1 ng g(-1) for D6 in agricultural soils and from 22 to 184 ng g(-1) for D5 and from 28 to 483 ng g(-1) for D6 in industrial soils. The total linear siloxanes concentrations (L5-L14) (sum of the 10 congeners) ranged from 191 to 292 ng g(-1) in agricultural soils and from 1411 to 8532 ng g(-1) in industrial soils.     

Silicon speciation by gas chromatography coupled to mass spectrometry in gasolines

A method for the speciation of silicon compounds in petroleum products was developed using gas chromatography coupled to mass spectrometry (GC-MS). Prior to analysis, several precautions about storage and conservation were applied for all samples. In spiked gasoline samples, limits of detection between 24 and 69 μg kg(-1) for cyclic siloxanes (D(4)-D(6)) and between 1 and 7 μg kg(-1) for other species were obtained. In this study, cyclic siloxanes (D(n)) and one ethoxysilane were quantified for the first time in petroleum products by a specific method based on response factor calculation to an internal standard. This method was applied to four samples of naphthas and gasolines obtained from a steam cracking process. Cyclic siloxanes were predominant in four investigated samples with concentrations ranging between 101 and 2204 μg kg(-1). Cyclic siloxane content decreased with an increase in their degree of polymerization. During a steam cracking process, silicon concentrations determined by GC-MS SIM (single ion monitoring) significantly increase. This trend was confirmed by ICP-OES (inductively coupled plasma optical emission spectroscopy) measurements but a difference on the total silicon content was observed, certainly highlighting the presence of unknown silicon species. GC-MS SIM method gives access to the chemical nature of the silicon species, which is crucial for the understanding of hydrotreatment catalyst poisoning in the oil and gas industry.     

The identification of mobile species from silicone gels used in burns scar remediation

The mobile species that may migrate from polydimethyl siloxane medical gel sheeting into skin have been identified by MALDI-MS. The chloroform-extractable species from the bulk gel comprised predominantly cyclic oligomers with a mass distribution peaking at n = 17, but in an aqueous environment the species at the surface were predominantly linear siloxanes with one hydrophilic end group (methyl/hydroxyl, methyl/methylol- or methyl/methoxy-). By using a gelatine matrix as a model substrate, the distribution of silicon after application of the silicone gel for 16 weeks was determined by Energy-dispersive X-Ray mapping of the sectioned gelatine. Extension of this method to tissue is complicated by the high background of silicon in the dermal layer, but it is demonstrated that MALDI-MS of silicone oligomers may be achieved directly from the surface of human skin sections. The association of the linear and cyclic oligomers with proteins relevant in hypertrophic scarring is considered.     

Polycondensation of trialkoxysilane monomers accelerated by neighboring group participation of urea moiety

(Phenylaminomethyl)trimethoxysilane (= α‐amino‐siloxane) was treated with various isocyanates to obtain a series of siloxanes having urea moieties (= α‐urea‐siloxanes). Their hydrolysis‐condensation reactions were monitored with ²⁹Si NMR, to reveal that they exhibited much higher reactivity than a urea‐siloxane derived from [3‐(phenylamino)propyl]trimethoxysilane (= γ‐amino‐siloxane). When compared with the derivation of the γ‐amino‐siloxane into the corresponding γ‐urea‐siloxane, those of the α‐amino‐siloxane into the corresponding α‐urea‐siloxanes were accompanied by much larger shifts of the ²⁹Si NMR signal toward a higher magnetic field. These results suggested that the location of the urea moiety in the α‐urea‐siloxanes was favorable to its intramolecular coordination to the silicon atom to exhibit its “neighboring group participation” that promoted transformation of the tetravalent silicon center into the pentavalent one, which is more electrophilic to make the siloxanes more susceptive to undergo the hydrolysis and condensation reactions. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6654–6659, 2008     

Rapid assembly of complex 3D siloxane architectures

Few routes to well-defined 3D silicone structures exist because of their susceptibility to depolymerization/metathesis in the presence of acids or bases. The Lewis acid B(C6F5)3 can be employed to condense hydrosilanes with alkoxysilanes, producing siloxanes and alkanes (R3SiH+R'OSiR' '3 --> R3SiOSiR' '3 + R'H). We demonstrate that balancing the steric demands at both the hydrosilane and alkoxysilanes, and the careful control of reaction conditions, permits clean condensation reactions to occur in the absence of competing metathesis processes. The resulting linear or highly branched siloxane compounds can be rapidly and easily assembled into explicit, complex 3D silicone structures in high yield.     

Synthesis and characterization of novel anionic siloxane polymers as pseudostationary phases for electrokinetic chromatography

Four novel siloxane polymeric pseudostationary phases with three different ionic head groups have been synthesized and characterized for electrokinetic chromatography. Siloxane polymers are of interest in this application because of the wide range of chemistries that can be developed based on these backbones, including much of the chromatographic stationary phase chemistry developed in the last thirty years. All four of the siloxanes studied were synthesized by modification of a single methylhydrosiloxane polymer with highly acidic anionic functionalities. One of the siloxanes had both ionic groups and alkane chains attached to the siloxane backbone. The electrophoretic mobilities varied from being somewhat less than sodium dodecyl sulfate (SDS) to being much greater than SDS. The siloxanes substituted with ionic groups at all of the silicon sites showed significant nonequilibrium band broadening, severely limiting the efficiencies of these polymers. Substitution of 20% of the silicon sites with an alkyl group improved the efficiency of the separations and the peak symmetry. The chemical selectivities of the siloxane polymers are very different from SDS, but are similar to each other.     

Silicone polycarbonates from new aryl-terminated siloxane precursors

Several synthetic routes to silicon polycarbonate copolymers utilizing aryl-terminated siloxanes have been examined. Anhydride capped siloxanes with varying polydimethylsiloxane units were prepared by the acid equilibration of 1,3-bis(4,4′-phthalicanhydride)tetramethyldisiloxane. These siloxanes were then imidized with aminophenol to the corresponding phenol capped siloxane. Reaction of these materials with 4,4′-isopropylidenediphenol (BPA) and phosgene (interfacially and non-interfacially) produced silicone polycarbonate copolymers. Similar copolymers were obtained by reaction with bis-chloroformate derivatives of 4,4′-isopropylidenediphenol (monomer and oligomers). The different synthetic routes significantly affect the thermal and mechanical properties as well as the composition of the new polymers. Materials synthesized by the bis-chloroformate route exhibit good hydrolytic and melt stabilities. Those made interfacially underwent phase separation in the melt.     

The thermal degradation of polysiloxanes—Part 4: Poly(dimethyl/diphenyl siloxane)

Poly(dimethyl/diphenyl siloxanes) have been prepared with a range of phenyl group contents both from mixtures of dimethyl and diphenyl cyclic siloxanes and from cyclic siloxanes in which both dimethyl and diphenyl structures are present. Attempts to prepare poly(diphenyl siloxane) with a reasonably high molecular weight were unsuccessful.The products of degradation of the poly(dimethyl/diphenyl siloxanes) are benzene and complex mixtures of cyclic oligomers which have been separated, identified and analysed. The characteristics of the formation of these products are discussed in relation to the degradation reactions which occur in poly(dimethyl siloxane), poly(methyphenyl siloxane) and poly(dimethyl/methylphenyl siloxane) and which have been described previously.     

Polysiloxane Gel with Low Crosslinking Density for Make-up Cosmetics

Silicic anhydride has conventionally and routinely been used as a gelling agent for silicones. In the present study, the mechanism wherein a crosslinked silicone having a specific crosslinking density is swollen in the presence of a silicone oil having a low viscosity to form a stable gel was applied to the manufacture of foundations, and optimum conditions that provide favorable functions and satisfactory organoleptic sensation were studied. Polymethylhydrogen siloxanes with a low crosslinking density were prepared by subjecting α,ω-divinyl polydimethyl siloxane to addition polymerization. The viscoelasticities of the gels formed by the resultant products and silicone oil were investigated. based on these results, it is concluded that the most suitable product is a low crosslinking density material obtained by adding α,ω-divinyl polydimethyl siloxane (M¯_w: 1.0 kDa) to polymethyl hydrogen siloxane having an average molecular weight of 2.5 kDa under the conditions wherein the concentration of dimethylpolysiloxane (viscosity: 6 × 10⁶ m² S^-1) is 60%. This product provides an enhanced viscosity at a reduced solids content. © 1997 John Wiley & Sons, Ltd.     

MALDI-Q-TOF mass spectrometric determination of gold and platinum in tissues using their diethyldithiocarbamate chelate complexes

A rapid determination method is presented for gold (Au³⁺) and platinum (Pt⁴⁺) in tissues using matrix-assisted laser desorption ionization quadrupole time-of-flight mass spectrometry (MALDI-Q-TOF-MS). Au and Pt ions in wet-ashed tissue solution were reacted with diethyldithiocarbamate (DDC), and the resulting chelate complex ions Au(DDC)₂ ⁺ and Pt(DDC)₃ ⁺ were detected by MALDI-Q-TOF-MS using α-cyano-4-hydroxycinnamic acid as a matrix. The limit of detection (LOD) was 0.8 ng/g tissue and the quantification range was 2–400 ng/g for Au, and the LOD was 6 ng/g tissue and the quantification range was 20–4,000 ng/g for Pt. The Pt levels detected by MALDI-Q-TOF-MS in several tissues of a patient overdosed with cisplatin were nearly the same as those detected by flow-injection electrospray ionization mass spectrometry. The LODs of Au and Pt were 0.04 pg per well (sample spot) and 0.3 pg per well, respectively. To our knowledge, this is the first attempt to quantify Au³⁺ and Pt⁴⁺ ions in tissues by MALDI-Q-TOF-MS.

Synthesis of poly(dimethylsiloxane) oligomers with pendant amine groups via co-equilibration anionic polymerization reactions

The present study describes a method of incorporating amine functional groups on poly(dimethylsiloxane) chains as pendant groups on silicon atoms. This method allows for independent control of the molecular weight and the amine content of the oligomer. The new molecular design was achieved by co-equilibration of the cyclic tetramer octamethylcyclotetrasiloxane (D₄) with a new cyclic siloxane monomer containing aliphatic amine substituents on the silicon atoms. The co-equilibration of the two cyclic siloxanes was carried out in the presence of a silanolate catalyst, using the nonfunctionalized hexamethyldisiloxane as the end-capper. The distribution of the molecular species at thermodynamic equilibrium and the efficiency of incorporation of siloxane units containing pendant amine functionalities into the poly(dimethylsiloxane) chains were investigated as a function of oligomer chemical composition and molecular weight.     

Densely crosslinked polycarbosiloxanes. II: Thermal and mechanical properties

The thermal and mechanical properties of two densely crosslinked polycarbosiloxane systems were investigated in relation to the molecular structure. The networks were prepared from functional branched prepolymers and crosslinked via a hydrosilylation curing reaction. The prepolymers having only vinyl functionalities (poly[phenylmethylvinyl]siloxanes) were crosslinked by using crosslinking agents with reactive silicon–hydrogen groups. In prepolymers having both silicon–vinyl and silicon–hydrogen groups (poly[phenylmethylvinylhydro)]siloxanes crosslinking took place intermolecularly. The thermal and mechanical properties of the polymer networks were found to be dependent on the phenyl  Si O_3/2 (branches) content in the prepolymer, the number of elastically effective crosslinks, the elastically effective network chain density and molecular weight between crosslinks, length of the chain segments introduced by the hydrosilylation crosslinking reaction, and the number of dangling ends. As a consequence of the dense crosslinking, the mechanical properties were also strongly dependent on the glass transition temperature. A tough–brittle transition was observed around the glass transition temperature of the polymer networks. The properties of the poly(phenylmethylvinylhydro)siloxane networks were found to be superior to those of the poly(phenylmethylvinyl)siloxane networks. © 1997 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 35 : 1311–1331, 1997     

Zur Synthese und Reaktivität Triflatsubstituierter Siloxanderivate

Synthesis and Reactivity of Triflate Substituted Siloxane Derivatives The reaction of amino substituted siloxane derivatives with trifluoromethanesulfonic acid leads under elimination of ammonium trifluoromethanesulfonate to the formation of siloxanyl triflates. The compounds are characterised by NMR-spectroscopy (²⁹Si, ¹³C, ¹H). The synthetic potential of these siloxanes is shown on selected examples. One interesting point of view is the synthesis of silicon containing oligo- and polymeres, in which siloxane and silylenealkine units are combined.     

Synthesis and Studies on Surface Active Water Soluble Derivatives of Siloxane Oligomers

Abstract

We report the synthesis of cationic water-soluble siloxanes by reacting aminosiloxanes with dimethyl, n-dodecyl 3-chloro-2-hy-droxypropyl quaternary ammonium iodide (DDCQA). Tetramethyl disiloxane on hydrosilation with allyl amine in the presence of hex-achloroplatinic acid/IPA gave bis(3-aminopropyl) octamethyltetra-siloxane. In addition, formation of Si-H containing oligomeric siloxanes were detected during this reaction and the extent of formation of the oligomers was found to depend upon the concentration of platinum. The oligomerization reaction was explained by dehydrogenative coupling of Si-H groups in the presence of platinum catalyst. A plausible mechanism for formation of aminosiloxane and the Si-H oligomers were proposed. Alternatively, cyclic Si -H containing siloxanes on polymerization using butyl lithium gave oligomeric Si-H containing siloxanes, which were hydrosilated to give aminosiloxanes. The quaternary aminosiloxanes synthesized showed lowering in surface tension of water to 26 mN/m.     

Quantitative determination of dihydrostreptomycin in bovine tissues and milk by liquid chromatography-electrospray ionization-tandem mass spectrometry

Dihydrostreptomycin (DHS) is an aminoglycoside antibiotic used in veterinary medicine in combination with benzylpenicillin for the treatment of bacterial infections in cattle, pigs and sheep. A method to determine its residues in edible tissues of cattle, as well as in milk, was developed and validated. Extraction of DHS from the tissues was performed using a liquid extraction with a 10 mM phosphate buffer containing 2% (w/v) trichloroacetic acid, while milk samples were treated with a 50% (w/v) trichloroacetic acid solution, followed by a solid-phase clean-up procedure on a carboxypropyl (CBA) weak cation exchange column. Ion-pair chromatography, using a mixture of 20 mM pentafluoropropionic acid in water and acetonitrile as the mobile phase, was used to retain DHS and the internal standard streptomycin (STR) on a Nucleosil (5 microm) reversed-phase C18 column. The components were detected and quantified by electrospray ionization (ESI) tandem mass spectrometry. The method could be validated according to EC (European Community) requirements with respect to linearity, trueness and precision, the latter evaluated at the maximum residue limit (MRL) - 1000 ng g(-1) for kidney, 500 ng g(-1) for muscle, liver and fat, and 200 ng g(-1) for milk -, at one-half of the MRL and at one and a half times the MRL. A limit of quantification of 10 ng g(-1) and 1 ng ml(-1) was obtained for all tissues and for milk, respectively, which is far below one-half of the MRL as requested, while the limit of detection was in the low ppb range, varying between 1.9 and 4.2 ng g(-1) for the different tissues tested, and being 0.6 ng ml(-1) for milk. The method was used for the monitoring of DHS residues in incurred tissue and milk samples coming from cattle medicated with DHS in combination with benzylpenicillin by intramuscular injection, in order to evaluate withdrawal times.     

Efforts directed toward the synthesis of colchicine: application of palladium-catalyzed siloxane cross-coupling methodology

[reaction: see text] Colchicine is an important and synthetically challenging natural product. The key synthetic step in this approach to the synthesis of colchicine involved a palladium-catalyzed cross-coupling reaction between 5-bromotropolone (4) and an aryl siloxane to form the aryl-tropolone bond. The coupling of a variety of highly functionalized aryl siloxane derivatives was investigated and optimized coupling conditions were developed. It was discovered that a palladium catalyst with a high degree of phosphine ligand coordination (5 equiv of phosphine/mol Pd) was necessary to efficiently couple aryl siloxanes with 5-bromotropolone (4). In addition, the coupling approach has provided a direct comparison between siloxane and boronic acid coupling technologies that demonstrated that aryl siloxanes and boronic acids produce similar yields of highly functionalized biaryl products.     

HPLC determination of urinary 2,4- and 2,6-toluendiamines as potential degradation products of polyurethane breast implants

Summary A reversed-phase HPLC method has been developed for the urinary determination of mutagenic 2,4- and 2,6-toluendiamines. These amines are degradation products of polyurethane, a material used to cover textured silicone breast implants. FMOC-Cl was used as fluorescent derivatising agent in order to obtain a limit of detection of 15 ng/ml in urine. Pre-treatment of urine samples was by liquid/liquid extraction and urine specimens of patients after surgury were analysed.     

Determination of gentamicin in swine and calf tissues by high-performance liquid chromatography combined with electrospray ionization mass spectrometry

Gentamicin is a broad-spectrum aminoglycoside antibiotic widely used in veterinary medicine for the treatment of serious infections. The purpose of this study was to develop and validate a method to determine gentamicin residues in edible tissues of swine and calf. Extraction of gentamicin was performed using a liquid extraction with phosphate buffer containing trichloroacetic acid, followed by a solid-phase clean-up procedure on a CBA weak cation-exchange column. Tobramycin was used as the internal standard. After drying of the eluate, the residue was redissolved and further analyzed by reversed-phase liquid chromatography/electrospray ionization tandem mass spectrometry (MS/MS). Chromatographic separation of the internal standard tobramycin and the gentamicin components was achieved on a Nucleosil (5 microm) column using a mixture of 10 mM pentafluoropropionic acid in water and acetonitrile as the mobile phase. The gentamicin components C1a, C2 + C2a and C1 could be identified with the MS/MS detection, and subsequently quantified. The method was validated according to the requirements of the EC at the maximum residue limit (MRL) (100 ng g(-1) for muscle and fat, 200 ng g(-1) for liver and 1000 ng g(-1) for kidney), half the MRL and double the MRL levels. Calibration graphs were prepared for all tissues and good linearity was achieved over the concentration ranges tested (r > 0.99 and goodness of fit <10%). Limits of quantification of 25.0 ng g(-1) were obtained for the determination of gentamicin in muscle, fat, liver and kidney tissues of swine and calf, which correspond in all cases to at least half the MRLs. Limits of detection ranged between 0.5 and 2.5 ng g(-1) for the tissues. The within-day and between-day precisions (RSD) and the results for accuracy fell within the ranges specified. The method was successfully used for the determination of gentamicin in tissue samples of swines and calves medicated with gentamicin by intramuscular injection.     

Comparative properties of siloxane vs phosphonate monolayers on a key titanium alloy

A direct comparison of surface loading, interface shear strength, and interface hydrolytic stability was made between a phosphonate and two siloxane monolayers formed on the native oxide surface of Ti-6Al-4V. Surface loading for the phosphonate was ca. four times greater (on a nanomole/area basis) than for the siloxanes; mechanical strengths per surface-bound molecule were comparable, but the hydrolytic stability (pH 7.5) of the siloxanes was poor. These results suggest that phosphonate monolayer interfaces are more desirable than comparable siloxane ones for applications where such interfaces contact even slightly alkaline water.