Partially crystallized Pd nanoparticles decorated TiO_2 prepared by atmospheric-pressure cold plasma and its enhanced photocatalytic performance

TiO_2 decorated with partially crystallized Pd nanoparticles(Pd/TiO_2-P) was successfully prepared by atmospheric-pressure dielectric barrier discharge cold plasma. The XRD and XPS analyses proved that Pd ions were reduced to partially crystallized metallic Pd nanoparticles in Pd/TiO_2-P. The XPS spectra also indicated that an enhanced metal-support interaction was formed due to the existence of partially crystallized Pd nanoparticles with lower coordination number in Pd/TiO_2-P. Photocatalytic activity of Pd/TiO_2-P was much higher than that of TiO_2 samples decorated with well crystallized Pd nanoparticles.     

Partially crystallized Pd nanoparticles decorated TiO2 prepared by atmospheric-pressure cold plasma and its enhanced photocatalytic performance

TiO2 decorated with partially crystallized Pd nanoparticles （Pd/TiO2-P） was successfully prepared by atmospheric-pressure dielectric barrier discharge cold plasma. The XRD and XPS analyses proved that Pd ions were reduced to partially crystallized metallic Pd nanoparticles in Pd/TiO2-P. The XPS spectra also indicated that an enhanced metal-support interaction was formed due to the existence of partially crystallized Pd nanoparticles with lower coordination number in Pd/TiO2-P. Photocatalytic activity of Pd/TiO2-P was much higher than that of TiO2 samples decorated with well crystallized Pd nanoparticles.     

Conducting polyaniline-rutile TiO2 nanocomposites for the development of high-k dielectric materials

Inorganic dielectrics encapsulated in an organic matrix are showing excellent promise as novel dielectric materials. In this work, firstly highly organized crystalline nanoparticles of rutile TiO₂ were synthesized by acid hydrolysis of titanium isopropoxide at room temperature. Then we developed a novel dielectric material consisting of highly organized rutile TiO₂/polyaniline (PAni) nanocomposites by in-situ chemical oxidative polymerization. The structural, morphological, conducting, and dielectric properties of the rutile TiO₂/PAni nanoparticles have been evaluated by X-ray diffraction (XRD), scanning electron microscopy (SEM), high resolution-transmission emission microscopy (HR-TEM), four-point probe technique, CV (Capacitance versus Voltage), and Impedance analyzer. The nanocomposites show 70 times higher permittivity compared to rutile nanoparticles and much higher compared to anatase/PAni (ES) nanocomposites at 10 MHz. Large interfacial polarizations, nanostructure, and dopant levels are the key factors for the large dielectric constant of the nanocomposites. The rutile/PAni (ES) nanocomposites might see potential uses in super-capacitors, gate dielectric in transistors, and capacitive-type gas sensors.     

Low Cost Compact Nanosecond Pulsed Plasma System for Environmental and Biomedical Applications

Nanosecond pulsed non-thermal atmospheric-pressure plasmas are promising for numerous applications including air and water purification, ozone synthesis, surface sterilization, material processing, and biomedical care. However, the high cost of the nanosecond pulsed power sources has hindered adaptation of the plasma-based technologies for clinical and industrial use. This paper presents a low cost (<100US$) nanosecond pulsed plasma system that consists of a Cockcroft–Walton high voltage charging circuit, a compact nanosecond pulse generator using a spark gap as switch, and a plasma reactor. The nanosecond pulse power source requires only a 12 V DC input, hence is battery operable. Through the optimization of the experimental parameters, pulses with a peak voltage >10 kV, a 3 ns rise time (10 to 90 %), and a 10 ns pulse duration (full width at half maximum) at a pulse repetition rate of up to 500 Hz were achieved in the present study. It has been successfully tested to power three different plasma reactors to form pulsed corona discharges, dielectric barrier discharges, and sliding discharges. The energy efficiency of such a nanosecond pulsed sliding discharge system was assessed in the context of ozone synthesis using air or oxygen as the feed gas, and was found comparable to a previously reported non-thermal plasma system that used commercial high voltage pulsed power sources. This study demonstrated that this low-cost nanosecond pulsed power source can prove to be an energy efficient and simple supply to drive various non-thermal atmospheric-pressure plasma reactors for environmental, medical and other applications.     

纳米复合材料中界面动态特性的扫描静电显微技术研究

纳米复合材料中的微观界面结构和界面作用对材料的宏观介电性能, 如介电常数、介电损耗、击穿强度等有十分重要的影响. 本文发展了一种基于扫描静电显微探针技术的测量方法, 可以直接表征二氧化钛/环氧树脂纳米复合材料的微观界面结构及相应的动态介电响应行为. 实验中利用扫描探针的纳米尺度分辨能力, 探测到不同温度下环氧树脂纳米复合材料的局域动态介电响应变化过程, 从而获得纳米颗粒与高分子界面相互作用及极化相关的温度特性. 进一步通过对二氧化钛纳米颗粒进行表面修饰, 得到了两种不同特性的二氧化钛/环氧树脂界面, 验证了不同界面作用引起的复合材料界面区域与非界面区域高分子链介电损耗图像的反差.     

Tailoring the polarity of polymer shell on BaTiO_3 nanoparticle surface for improved energy storage performance of dielectric polymer nanocomposites

Nanocomposites comprising flexible polymers and high dielectric constant inorganic nanoparticles are considered to be one of the promising candidates for electrostatic capacitor dielectrics.However,the effect of interfacial property on electrical ene rgy storage of dielectric polymer nanocomposites is still not clear.Herein,the role of the polarity of the interfacial region is investigated.For this purpose,three polymers with different polarity,polymethyl methacrylate(PMMA),polyglycidyl methacrylate,and polymethylsulfonyl ethyl methacrylate(PMSEMA) are attached onto BaTi03(BT) na noparticle surface via surface-initiated reversible addition-fragmentation chain transfer polymerization.It is found that the polarity of shell polymers shows an apparent effect on the dielectric and energy storage of dielectric polymer nanocomposites.For example,PMSEMA@BT(shell polymer possesses the highest polarity)increases dielectric loss and decreases the breakdown strength of the nanocomposites,leading to lower ene rgy storage capability.However,PMMA@BT(shell polymer possesses the lowest polarity) can induce higher breakdown strength of the nanocomposites.As a result,the PMMA@BT nanocomposite exhibits the highest electrical energy sto rage capability among the three nanocomposites.This re search provides new insight into the design of core-shell nanofillers for dielectric energy storage applications.     

A study of atmospheric-pressure CHF3/Ar plasma treatment on dielectric characteristics of polyimide films

In this work, the influence of atmospheric-pressure CHF(3)/Ar plasma treatment on surface dielectric properties of polyimide films was investigated using X-ray photoelectron spectroscopy (XPS), atomic force microscopy (AFM), and contact angle measurements. The dielectric characteristics of the films were studied using a dielectric spectrometer. From the results, it was found that the plasma treatment introduced fluorine functional groups onto the polyimide surfaces. F 1s/C 1s ratios of the polyimides were enhanced with the increase of plasma treatment time. Consequently, the fluorine groups led to a decrease of the surface free energy and dielectric constant of the polyimide films, which can largely be attributed to the decrease of the deformation polarizability or London dispersive component of surface free energy of the solid surface studied.     

Electrical and electro-optical parameters of 4ʹ-octyl-4-cyanobiphenyl nematic liquid crystal dispersed with gold and silver nanoparticles

Thermodynamical, dielectric, optical and electro-optical characterisation of pure 8CB and its composites with gold and silver nanoparticles have been studied. Thermodynamical studies suggest a decrease in clearing temperature of the nanocomposite systems as compared to the pure system. Dielectric parameters of pure nematic liquid crystal and nanocomposites in the homeotropic and planar aligned samples have been measured in the frequency range of 1–35 MHz. Ionic conductivity increases significantly in nematic and smectic A_d (SmA_d) phases, whereas dielectric anisotropy is almost unchanged for both the nanocomposites. Threshold voltage for Freederick transition, switching voltage and splay elastic constant have decreased in the case of nanocomposite systems. Relaxation frequency and activation energy of an observed relaxation mode corresponding to molecular rotation about the short axis increase in the SmA_d phases of both the nanocomposites. The optical study suggests that due to dispersion of nanoparticles, the optical band gap has decreased.     

Two Atmospheric-pressure Plasma Sources for Polymer Surface Modification

Two atmospheric-pressure plasma sources were studied. One was a helium plasma generated by a RF discharge, and the other was an air plasma generated by a dielectric barrier discharge (DBD). The two plasma sources were characterized on electron density, emission spectrum, and ozone density. The modification of polyethyleneterephthalate (PET) surfaces by the two plasmas was investigated. PET strips were exposed to the plasma at the exit of the plasma source. Water contact angles were measured for surfaces modified with different processing parameters. The change in contact angles was monitored as a function of time. Modification mechanisms were also investigated.     

Effect of Magnetite Nanoparticles on the Dielectric Properties of Nanocomposites Based on Linear Low-Density Polyethylene

Russian Journal of Physical Chemistry A - The effect magnetite nanoparticles on the dielectric properties of nanocomposites based on linear low-density polyethylene in the 10−2–105 Hz...     

Structure and dielectric relaxations of antibacterial sulfonated polystyrene and silver nanocomposites

Structure and dielectric relaxations of antibacterial sulfonated polystyrene (SPS) and silver nanocomposites (SPS/Ag) were investigated via broadband dielectric spectroscopy, Fourier transform infrared spectroscopy, ultraviolet–visible spectroscopy, differential scanning calorimetry, scanning electron microscopy, and wide‐angle X‐ray diffraction. SPS/Ag nanocomposites were prepared from SPS containing 2, 4, and 7 mol% of acid contents, followed by ion exchange and a reduction process. Silver nanoparticles were formed in the structural cavities of SPS films. The single glass transition temperature of the SPS copolymers was observed and increased with increasing acid contents and more enhanced with embedded silver nanoparticles because of the restriction of the polymer chain movement. The particle size of embedded silver nanoparticles was about 10 nm and well dispersed in SPS matrices. Four dielectric relaxations were observed above the glass transition temperature, and they were attributed to the fast segmental relaxation, the slow‐hindered segmental relaxation, relaxations associated with Maxwell–Wagner–Sillars interfacial polarization and electrode polarization. Weak local relaxations were observed due to the motion of sulfonated phenyl groups. Copyright © 2014 John Wiley & Sons, Ltd.     

Surface Modification of Polypropylene Non-Woven Fabrics by Atmospheric-Pressure Plasma Activation Followed by Acrylic Acid Grafting

Polypropylene (PP) non-woven fabrics have been activated by an atmospheric-pressure plasma treatment using surface dielectric barrier discharge in N₂ and ambient air. Subsequently, the plasma activated samples were grafted using catalyst-free water solution of acrylic acid. Surface properties of the activated and polyacrylic acid post-plasma grafted non-woven were characterised by scanning electron microscopy, Fourier transform infrared spectroscopy, electron spin resonance spectroscopy, surface energy and dyeability measurements. The grafted non-woven exhibit improved water transport and dyeing properties. The plasma activation in nitrogen plasma gas was more efficient than in air.     

Nanocomposites based on polyamidoimide and octahedral silsesquioxanes

New polymeric nanocomposites were prepared by covalent bonding of nanosized octahedral silsesquioxane particles containing reactive glycidyl group to polyamidoimides containing a carboxy group in the pendant chain. The influence of temperature, molecular weight of the polymer, and reaction time on the covalent bonding of polyhedral oligomeric silsesquioxane (POSS) nanoparticles was revealed. The effect of the POSS nanoparticle incorporation on the structure, dielectric and deformation-strength properties, and heat resistance of the new polymeric nanocomposites was examined.     

Investigation of the electrical properties of XLPE/SiC nanocomposites

The interface between nanoparticles and the polymer matrix, which dominates the electrical properties of nanocomposites, can effectively improve the DC breakdown and suppress space charge accumulation in nanocomposites. To research the interface characteristics, XLPE/SiC nanocomposites with concentrations of 1 wt%, 3 wt% and 5 wt% were prepared. The DC breakdown, dielectric properties and space charge behavior were examined using pulsed electro-acoustic (PEA) equipment and a dielectric analyzer. The test results show that the nanocomposites with concentrations of 1 wt% and 3 wt% have higher DC breakdown field strength than neat XLPE. In contrast, there is a lower DC breakdown strength at a concentration of 5 wt%, possibly due to the agglomeration of nanoparticles. Nanoparticle doping increases the real and imaginary permittivities over those of neat XLPE. Furthermore, with increasing concentration, a larger increase in the permittivity amplitude was observed. Based on the space charge behavior, all nanocomposites could suppress space charge accumulation, but the nanocomposite with a concentration of 1 wt% exhibited the best effect. Meanwhile, heterocharge accumulation near electrodes was observed in neat XLPE and the nanocomposite with a concentration of 5 wt%. In contrast, homocharge accumulation near electrodes was observed in the nanocomposite with a concentration of 3 wt%. This phenomenon may be due to different amounts of shallow traps in nanocomposites with different concentrations, which might lead to differing electron or hole mobility.     

Glass fiber reinforced bismaleimide/epoxy BaTiO3 nano composites for high voltage applications

BaTiO₃/bismaleimide/epoxy/glass fiber reinforced composites were prepared using E-glass fiber (E-GF) and silane coated E-glass fiber (SC-EGF) separately as reinforcement. BaTiO₃ nanoparticles were prepared by hydrothermal method. Results show that the addition of BaTiO₃ nanoparticles has significant effects on the mechanical and dielectric properties of the composite. Both E-GF and SC-EGF reinforced BaTiO₃/bismaleimide/epoxy composites with 2 wt percentages of BaTiO₃ nanoparticles showed improved tensile strength, flexural strength and dielectric constant and those with 3% showed high dielectric strength indicating this composition is more adaptable for high voltage insulating applications. Dielectric constants and dielectric loss of the fabricated nanocomposites have been obtained at higher frequencies (in GHz) by using Vector Network Analyser at room temperature and was found to be highest for the BMI-Epoxy nanocomposite with 1% weight nanofiller.     

Optical and electrical properties of copper alumina nanoparticles reinforced chlorinated polyethylene composites for optoelectronic devices

The incorporation of transition metal oxide fillers into the polymer matrix through solution mixing polymerization imparts enhanced electrical and thermal properties. The present work focused on the optical properties, crystallinity, thermal stability, temperature-dependent conductivity, dielectric constant and modulus of chlorinated polyethylene/copper alumina (CPE/Cu–Al₂O₃) nanocomposites. Optical absorption measured using an ultraviolet–visible (UV–visible) spectrometer shows enhanced intensity and a blue shift for CPE/Cu–Al₂O₃ nanocomposites. The bandgap energy of CPE/Cu–Al₂O₃ nanocomposites was lower than pure CPE and minimum bandgap energy was recorded for a 7 wt% composites. The X-ray diffraction demonstrates that Cu–Al₂O₃ nanoparticles were uniformly introduced into the CPE matrix. Thermogravimetric analysis (TGA) manifests improved thermal stability of nanocomposites. Dielectric properties decrease with frequency, whereas AC conductivity increases with frequency, and both AC conductivity and dielectric properties increase with temperature. The maximum AC conductivity and dielectric constant were obtained for 7 wt % nanofiller loaded sample. For all systems, the activation energy for electrical conductivity decreases with rising temperatures. The experimental dielectric constant values of CPE nanocomposites were correlated with different theoretical models. The Bruggeman model was in good agreement with the experimental permittivity. The impedance experiments showed a decreasing trend with temperature, indicating the semiconducting nature of prepared nanocomposites.     

Glass transition and polymer dynamics in silver/poly(methyl methacrylate) nanocomposites

Dynamic mechanical–thermal analysis (DMTA), differential scanning calorimetry (DSC), thermally stimulated depolarization currents (TSDC) and, mainly, broadband dielectric relaxation spectroscopy (DRS) were employed to investigate in detail glass transition and polymer dynamics in silver/poly(methyl methacrylate) (Ag/PMMA) nanocomposites. The nanocomposites were prepared by radical polymerization of MMA in the presence of surface modified Ag nanoparticles with a mean diameter of 5.6 nm dispersed in chloroform. The fraction of Ag nanoparticles in the final materials was varied between 0 and 0.5 wt%, the latter corresponding to 0.055 vol%. The results show that the nanoparticles have practically no effect on the time scale of the secondary β and γ relaxations, whereas the magnitude of both increases slightly but systematically with increasing filler content. The segmental α relaxation, associated with the glass transition, becomes systematically faster and stronger in the nanocomposites. The glass transition temperature T_g decreases with increasing filler content of the nanocomposites up to about 10 °C, in good correlation by the four techniques employed. Finally, the elastic modulus decreases slightly but systematically in the nanocomposites, both in the glassy and in the rubbery state. The results are explained in terms of plasticization of the PMMA matrix, due to constraints imposed to packing of the chains by the Ag nanoparticles, and at the same time, of the absence of strong polymer–filler interactions, due to the surface modification of the Ag nanoparticles by oleylamine at the stage of preparation.     

Improvement on Hydrophilic and Hydrophobic Properties of Glass Surface Treated by Nonthermal Plasma Induced by Silent Corona Discharge

A fundamental study was conducted to investigate the improvement of the hydrophilic and hydrophobic properties of the glass surface using the atmospheric-pressure nonthermal plasma. The plasma was induced between the two parallel electrodes with a dielectric barrier using an AC 60Hz high voltage power supply. The objective is to demonstrate the possibility of the elimination of the windshield wiper from automobiles. Two approaches were undertaken for modifying the glass surface: one is hydrophilic approach using plasma alone and the other is hydrophobic approach using the combination of hydrophobic chemical and nonthermal plasma. The plasma application provided excellent hydrophilic properties (less than 4° of contact angle). However, the durability did not last for more than one day. The combination of hydrophobic Tri Alkoxy Silane (TAS) chemical coating and nonthermal plasma showed an excellent hydrophobic property and extended durability, more than five times more durable compared with TAS alone.     

Revealing the Nano‐Level Molecular Packing in Chitosan–NiO Nanocomposite by Using Positron Annihilation Spectroscopy and Small‐Angle X‐ray Scattering

Chitosan–NiO nanocomposite (CNC) is shown to be a potential dielectric material with promising properties. CNCs containing NiO nanoparticles (0.2, 0.6, 1, 2, 5 wt %) are prepared through chemical methods. The inclusion of NiO nanoparticles in the chitosan matrix is confirmed by scanning electron microscopy (SEM) and X‐ray diffraction. The morphology of the NiO nanoparticles and the nanocomposites is investigated by transmission electron microscopy and SEM, respectively. Positron annihilation lifetime spectroscopy (PALS) and the coincidence Doppler broadening (CDB) technique are used to quantify the free volume and molecular packing in the nanocomposites. The triplet‐state positronium lifetime and the corresponding intensity show the changes in nanohole size, density, and size distribution as a function of NiO loading. Small‐angle X‐ray scattering indicates that the NiO aggregates are identical in all the CNCs. The momentum density distribution obtained from CDB measurements excludes the possibility of a contribution of vacant spaces (pores) available in NiO aggregates to the free volume of nanocomposites upon determination by using PALS. The results show systematic variation in free‐volume properties and nano‐level molecular packing as a function of NiO loading, which is presumed to play a vital role in determining the various properties of the nanocomposites.     

Thermal Conductivity of Nanocomposites Based in High Density Polyethylene and Surface Modified Hexagonal Boron Nitride via Cold Ethylene Plasma

Hexagonal boron nitride nanoparticles (hBN) were surface modified by treatment with cold ethylene plasma. During this treatment, an ultrathin plasma polymerized polyethylene layer is deposited on the surface of the hBN nanoparticles. Before and after the plasma treatment, the nanoparticles were characterized by infra-red spectroscopy, thermogravimetric analysis, transmission electron microscopy (TEM) and X-ray diffraction. Untreated and plasma treated nanoparticles were incorporated via melt mixing into high density polyethylene (HDPE), at different concentrations. Dispersion of hBN within the polymer and the polymer-particle interaction were studied by TEM. Thermal conductivity of the prepared nanocomposites was determined by modulated differential scanning calorimetry. In general, the thermal conductivity of all HDPE–hBN prepared nanocomposites was higher than that of pure HDPE. However, the higher conductivity values, 97 and 114% higher than that of pure HDPE, were obtained in plasma treated samples (treated at 100 W for 5 min) with 8 and 15 wt% loading of hBN.