Use of buffering and other means to improve results of problematic pesticides in a fast and easy method for residue analysis of fruits and vegetables

A modification that entails the use of buffering during extraction was made to further improve results for certain problematic pesticides (e.g., folpet, dichlofluanid, chlorothalonil, and pymetrozine) in a simple, fast, and inexpensive method for the determination of pesticides in produce. The method, known as the quick, easy, cheap, effective, rugged, and safe (QuEChERS) method for pesticide residues in foods, now involves the extraction of the sample with acetonitrile (MeCN) containing 1% acetic acid (HAc) and simultaneous liquid-liquid partitioning formed by adding anhydrous MgSO4 plus sodium acetate (NaAc). The extraction method is carried out by shaking a centrifuge tube which contains 1 mL of 1% HAc in MeCN plus 0.4 g anhydrous MgSO4 and 0.1 g anhydrous NaAc per g sample. The tube is then centrifuged, and a portion of the extract is transferred to a tube containing 50 mg primary secondary amine sorbent plus 150 mg anhydrous MgSO4/mL of extract. After a mixing and centrifugation step, the extract is transferred to autosampler vials for concurrent analysis by gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/tandem mass spectrometry. Independent of the original sample pH, the use of buffering during the extraction yields pH <4 in the MeCN extract and >5 in the water phase, which increases recoveries of both acid- and base-sensitive pesticides. The method was evaluated for 32 diverse pesticides in different matrixes, and typical percent recoveries were 95 +/- 10, even for some problematic pesticides. Optional solvent exchange to toluene prior to GC/MS analysis was also evaluated, showing equally good results with the benefit of lower detection limits, but at the cost of more time, material, labor, and expense.     

Determination of pesticide residues in foods by acetonitrile extraction and partitioning with magnesium sulfate: collaborative study

A collaborative study was conducted to determine multiple pesticide residues in fruits and vegetables using a quick, simple, inexpensive, and effective sample preparation method followed by concurrent analysis with gas chromatography/mass spectrometry (GC/MS) and liquid chromatography/ tandem mass spectrometry (LC/MS/MS). For short, the method is known as QuEChERS, which stands for quick, easy, cheap, effective, rugged, and safe. Twenty representative pesticides were fortified in 3 matrixes (grapes, lettuces, and oranges) at 3 duplicate levels unknown to the collaborators ranging from 10 to 1000 ng/g. Additionally, 8 incurred pesticide residues were determined. Thirteen laboratories from 7 countries provided results in the study, and a variety of different instruments were used by collaborators. The QuEChERS procedure simply entails 3 main steps: (1) a 15 g homogenized sample is weighed into a 50 mL centrifuge tube to which 15 mL acetonitrile containing 1% HOAc is added along with 6 g MgSO4 and 1.5 g NaOAc, and the tube is shaken and centrifuged; (2) a portion of the extract is mixed with 3 + 1 (w/w) MgSO4-primary secondary amine sorbent (200 mg/mL extract) and centrifuged; and (3) the final extract is analyzed by GC/MS and LC/MS/MS. To detect residues <10 ng/g in GC/MS, large-volume injection of 8 microL is typically needed, or the extract can be concentrated to 4 g/mL in toluene, in which case 2 microL splitless injection is used. In the study, the averaged results for data from 7-13 laboratories (not using internal standardization) for the 18 blind duplicates at the 9 spiking levels in the 3 matrixes are as follows [%recovery and reproducibility relative standard deviation (RSD(R), %)]: atrazine, 92 (18); azoxystrobin, 93 (15); bifenthrin, 90 (16); carbaryl, 96 (20); chlorothalonil, 70 (34); chlorpyrifos, 89 (25); cyprodinil, 89 (19); o,p'-DDD, 89 (18); dichlorvos, 82 (21); endosulfan sulfate, 80 (27); imazalil, 77 (33); imidacloprid, 96 (16); linuron, 89 (19); methamidophos, 87 (17); methomyl, 96 (17); procymidone, 91 (20); pymetrozine, 69 (19); tebuconazole, 89 (15); tolylfluanid (in grapes and oranges), 68 (33); and trifluralin, 85 (20). For incurred pesticides, kresoxim-methyl (9.2 +/- 3.2 ng/g) and cyprodinil (112 +/- 18) were found in the grapes; permethrins (112 +/- 41), lamda-cyhalothrin (58 +/- 11), and imidacloprid (12 +/- 2) were determined in the lettuces; and ethion (198 +/- 36), thiabendazole (53 +/- 8), and imazalil (13 +/- 4) were determined in the oranges. Chlorpyrifosmethyl (200 ng/g) was used as a quality control standard added during sample homogenization and yielded 86% recovery and 19% RSD(R). Intralaboratory repeatabilities for the method averaged 9.8% RSD for all analytes. The results demonstrate that the method is fit-for-purpose to monitor many pesticide residues in fruits and vegetables, and the Study Director recommends that it be adopted Official First Action.     

Determination of organophosphorus pesticides in Lycium barbarum by gas chromatography with flame photometric detection

An analytical method was developed to determine 14 organophosphorus pesticide residues in Lycium barbarum, which is both a botanical medicine and a food. A 5 g sample is mixed with 10 mL ethyl acetate and, after shaking and centrifuging, 5 mL of the upper layer is removed, concentrated, and analyzed by gas chromatography (GC) with flame photometric detection. The essential feature of this method is that, for the purpose of reducing the burden of the GC system, 0.01 g activated carbon is used to absorb pigments during the cleanup procedure. Average recoveries of 14 organophosphorus pesticides added at 0.05, 0.1, and 0.5 mg/kg were 66.84-102.42, 71.07-97.93, and 62.50-96.24%, respectively. Limits of detection ranged from 5 to 15 microg/kg. The identities of the 14 pesticides were confirmed by GC/mass spectrometry detection in the selected-ion monitoring mode. This method is sensitive, simple, rapid, inexpensive, and safe.     

Spectrophotometric determination of some pesticides in water samples after preconcentration with Saccharomyces cerevisiae immobilized on sepiolite

A sensitive and selective method for the preconcentration and determination of carbaryl, chlorpyrifos, linuron, and thiram was developed. The column sorption method was used for the preconcentration studies. Several parameters, such as amount of sorbent, pH, flow rate, volume of elution solution, and interferences, that can influence the retention of pesticides on Saccharomyces cerevisiae immobilized on sepiolite were investigated. Results showed that it was possible to achieve quantitative analysis when the sample pH was in the range 4-6 for carbaryl and thiram, 4-8 for linuron and 6 for chlorpyrifos using 100 mL of sample solution containing 20 microg of pesticide and 5 mL of eluent. Recoveries of carbaryl, chlorpyrifos, linuron, and thiram were 93.2 +/- 0.4%, 97.1 -/+ 0.3%, 98.5 +/- 0.4%, and 96.1 +/- 0.2%, respectively, at 95% confidence level under optimum conditions. The capacity of the sorbent was found to be 41, 28, 35, and 46 mg g(-1) for carbaryl, chlorpyrifos, linuron, and thiram, respectively. Saccharomyces cerevisiae immobilized on sepiolite is suitable for repeated use without loss of capacity up to twenty five cycles. The pesticides studied have been determined in river water with high precision and accuracy.     

Disposable pipette extraction for the analysis of pesticides in fruit and vegetables using gas chromatography/mass spectrometry

Organochlorine, organophosphate pesticides and fungicides in fruits and vegetables were analyzed using disposable pipette extraction (DPX) followed by gas chromatography–mass spectrometry-selective ion monitoring (GC/MS-SIM). The intrinsic rapid mixing capabilities of DPX result in fast and efficient extractions, and eluates are concentrated by using minimal elution solvent volumes rather than solvent evaporation methods. Matrix-matched calibrations were performed with reversed phase mechanisms (DPX-RP), and the limits of detection (LOD) were determined to be lower than 0.1 μg/mL for all targeted pesticides in carrot and orange sample matrices. Coefficients of determination (r²) were greater than 0.995 for most studied pesticides. DPX-RP exhibited recoveries between 72 and 116% for nonpolar and slightly polar pesticides (log P > 2) with most of the recoveries over 88%. Only very polar pesticides (e.g., acephate, mathamidophos) were not extracted well using DPX-RP.     

Simultaneous determination of three organophosphorus pesticides in different food commodities by gas chromatography with mass spectrometry

A sensitive and selective gas chromatography with mass spectrometry method was developed for the simultaneous determination of three organophosphorus pesticides, namely, chlorpyrifos, malathion, and diazinon in three different food commodities (milk, apples, and drinking water) employing solid‐phase extraction for sample pretreatment. Pesticide extraction from different sample matrices was carried out on Chromabond C₁₈ cartridges using 3.0 mL of methanol and 3.0 mL of a mixture of dichloromethane/acetonitrile (1:1 v/v) as the eluting solvent. Analysis was carried out by gas chromatography coupled with mass spectrometry using selected‐ion monitoring mode. Good linear relationships were obtained in the range of 0.1–50 μg/L for chlorpyrifos, and 0.05–50 μg/L for both malathion and diazinon pesticides. Good repeatability and recoveries were obtained in the range of 78.54–86.73% for three pesticides under the optimized experimental conditions. The limit of detection ranged from 0.02 to 0.03 μg/L, and the limit of quantification ranged from 0.05 to 0.1 μg/L for all three pesticides. Finally, the developed method was successfully applied for the determination of three targeted pesticides in milk, apples, and drinking water samples each in triplicate. No pesticide was found in apple and milk samples, but chlorpyrifos was found in one drinking water sample below the quantification level.     

顶空固相微萃取气相-质谱法测定纺织品中防虫蛀剂的残留

 采用顶空固相微萃取技术和气相 质谱联用技术对纺织品中的挥发性防虫蛀剂的残留进行了测定。该方法对挥发性二氯苯和萘的检测限量为 1μg/kg ,回收率为 83 6 %～ 115 2 % ,相对标准偏差为 8 1%～ 9 8%。     

Analysis of pesticides residues in fresh produce using buffered acetonitrile extraction and aminopropyl cleanup with gas chromatography/triple quadrupole mass spectrometry, liquid chromatography/triple quadrupole mass spectrometry, gas chromatography/ion trap detector mass spectrometry, and GC with a halogen-specific detector

A rapid and inexpensive multiresidue method for determining pesticides in fruits and vegetables is presented. Extraction of a 15 g sample with 15 mL acetonitrile was followed by buffering with magnesium sulfate, sodium chloride, sodium citrate dihydrate, and disodium citrate. Acidification with formic acid prior to dispersive cleanup with aminopropyl sorbent and magnesium sulfate was used to stabilize base-sensitive pesticides such as chlorothalonil. Extracts were concentrated to 2 g/mL. Analyses were conducted by GC/ion trap detector MS, GC-halogen-specific detector, and LC/triple quadrupole MS. Accuracy and repeatability for 166 compounds in tomato, potato, and cabbage were 70-120% and <20% CV in 85% of the compounds, respectively. Reproducibility over a 4 month period in multiple commodities and analytical conditions was 62-124%, with CVs better than 30% for 91% of the compounds. Supply cost/sample was reduced 66%, and time to extract a batch of 24 samples was reduced by half compared to the prior method that used a 50 g sample, 100 mL acetonitrile, multiple SPE columns, and additional instrumentation. Additional extraction studies were conducted in tomatoes, oranges, and green beans at 4 g/mL using a GC/MS triple quadrupole system with a programmable temperature vaporization inlet. Recoveries of 70-120% were achieved in 93% of all compounds in green beans, 95% in tomatoes, and 97% in oranges.     

Determination of ligustilide in rat blood and tissues by capillary gas chromatography/mass spectrometry

A gas chromatography/mass spectrometry (GC/MS) method was developed to study the pharmacokinetics of ligustilide following oral administration to rats. The method was used for the analysis of samples taken from rats. Biological samples were prepared by liquid-liquid extraction (LLE) using an n-hexane-ether (2:1) solvent mixture for a sample clean-up step and analyzed by GC/MS with a quadrupole MS detector in selected ion monitoring mode (m/z 190). The calibration curves were linear over the concentration range 0.172-8.60 microg/mL (r > 0.99) for blood samples and a different range (r > 0.99) for different tissue samples. The limit of detection (LOD) was 1.0 ng/mL or 1.0 ng/g (three times the signal-noise ratio). Within- and between-day precision expressed as the relative standard deviation (RSD) for the method was 1.58-3.88 and 2.99-4.91%, respectively. The recovery for all samples was >80%, except for liver samples (>70%). The main pharmacokinetic parameters obtained were: T(max) = 0.65 +/- 0.07 h, C(max) = 1.5 +/- 0.2 microg/mL, AUC = 34 +/- 6 h microg/mL and K(a) = 3.5 +/- 0.6/h. The experimental results showed that ligustilide was easily absorbed, but its elimination was slow, from 3 to 12 h after oral administration. The concentrations of ligustilide in rat cerebellum, cerebrum, spleen and kidney were higher than those in other organs.     

Simultaneous analysis of 260 pesticide residues in agricultural products by gas chromatography/triple quadrupole mass spectrometry

A method for simultaneous analysis of about 260 pesticides by gas chromatography coupled to tandem mass spectrometry (GC/MS/MS) with a triple quadrupole analyzer (QqQ) has been studied. The pesticides were extracted with acetonitrile and cleaned up by a bilayer cartridge. A single injection method was developed for the monitoring of all of the targeted pesticides. Two MS/MS transitions were selected for each analyte using the intensity ratio obtained from them as a confirmatory parameter. By using matrix-matched standards, 260 pesticides could be determined in most matrixes with recoveries of 70-120% and a standard deviation of < or = 20 at 2 different fortification levels of 0.02 and 0.1 microg/g. The developed method was applied to the monitoring of 173 agricultural product samples from the local market. The sensitivities of this method were lower than with most of the selective GC detectors, such as flame photometric or single MS. The selectivity of QqQ gives a very clean chromatogram, making compound identification and confirmation easy. The quick and reliable monitoring was achieved by combination with rapid extraction and cleanup.     

Fast and easy multiresidue method employing acetonitrile extraction/partitioning and "dispersive solid-phase extraction" for the determination of pesticide residues in produce

A simple, fast, and inexpensive method for the determination of pesticide residues in fruits and vegetables is introduced. The procedure involves initial single-phase extraction of 10 g sample with 10 mL acetonitrile, followed by liquid-liquid partitioning formed by addition of 4 g anhydrous MgSO4 plus 1 g NaCl. Removal of residual water and cleanup are performed simultaneously by using a rapid procedure called dispersive solid-phase extraction (dispersive-SPE), in which 150 mg anhydrous MgSO4 and 25 mg primary secondary amine (PSA) sorbent are simply mixed with 1 mL acetonitrile extract. The dispersive-SPE with PSA effectively removes many polar matrix components, such as organic acids, certain polar pigments, and sugars, to some extent from the food extracts. Gas chromatography/mass spectrometry (GC/MS) is then used for quantitative and confirmatory analysis of GC-amenable pesticides. Recoveries between 85 and 101% (mostly > 95%) and repeatabilities typically < 5% have been achieved for a wide range of fortified pesticides, including very polar and basic compounds such as methamidophos, acephate, omethoate, imazalil, and thiabendazole. Using this method, a single chemist can prepare a batch of 6 previously chopped samples in < 30 min with approximately 1 dollar (U.S.) of materials per sample.     

On-line derivatization gas chromatography with furan chemical ionization tandem mass spectrometry for screening of amphetamines in urine

A simple alternative method with minimal sample pretreatment is investigated for screening of amphetamines in small volume (using only 20 microL) of urine sample. The method is sensitive and selective. The method uses gas chromatography (GC) direct sample introduction (DSI) for on-line derivatization (acylation) of amphetamines to improve sensitivity. Furan as chemical ionization (CI) reagent in conjunction with tandem mass spectrometry (MS/MS) is used to improve selectivity. Low background with sharp protonated molecular ion peaks of analytes is the evidence of improvement in sensitivity and selectivity. Blank urine samples spiked with known amounts of amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine, 3,4-methylenedioxymethamphetamine and 3,4-methylenedioxyethylamphetamine is analyzed. Selected ion monitoring of the characteristic product ions (m/z 119+136+150+163) using furan CI-MS/MS in positive ion mode is used for quantification. Limits of detection (LOD) between 0.4 and 1.0 ng mL(-1) and limits of quantitation (LOQ) between 1.0 and 2.0 ng mL(-1) are established. Linear response over the range of 1-1000 ng mL(-1) (r(2)>0.997) is observed for all analytes, except for methamphetamine (2.0-1000 ng mL(-1)). Good accuracy between 86 and 113% and precision ranging from 4 to 18% is obtained. The method is also tested on real samples of urine from suspected drug abusers. This method could be used for screening and determination of amphetamines in urine samples, however needs additional work for full validation.     

Analytical study of comprehensive and targeted multidimensional gas chromatography incorporating modulated cryogenic trapping

This paper reports the results of an analytical study comparing capillary gas chromatography (GC) operated in the normal mode with 2 new GC techniques, comprehensive GC (GC x GC) and targeted (or selective) multidimensional GC, which use a longitudinally modulated cryogenic system (LMCS), recently developed in our laboratory. A high-temperature application of derivatized sterols, of interest in fecal pollution monitoring, was chosen for this work. A directly connected coupled-column ensemble was used, comprising a nonpolar column and a moderately polar column. With LMCS, effluent from the first column is zone-compressed in a cryogenic trap and then pulsed to a short second column, producing narrower peaks with sharp, tall peak responses at the detector. The modulator is operated at a constant frequency, e.g., 0.25 s(-1), to produce the GC x GC result, or is moved in a predefined manner so that whole peaks are selectively trapped and subsequently pulsed through to the second column in the targeted mode. Standard solutions containing a mixture of 7 sterols and 5-alpha-cholestane internal standard were used. Detection sensitivity is increased by a factor of >25 with the use of LMCS. The estimated limit of detection was about 0.1 microg/mL when normal GC with flame ionization detection (GC/FID) and a 1.0 microL splitless injection volume were used, compared with 0.02 and 0.004 microg/mL for the LMCS operated in GC x GC and selective modes, respectively. Calibration curves for GC/FID were linear over the 0.1-2.0 microg/mL range tested. Reproducibilities for the GC x GC and normal GC modes were comparable; generally, relative standard deviations (RSD) were on the order of 3-4%, based on raw peak responses. Improved reproducibility was found for selective LMCS operation, at an RSD of around 2%; with internal standardization, better results were achieved. The coupled-column arrangement allowed complete separation of sterol peaks from overlapping impurity peaks in a number of instances with LMCS modes, and its use should improve data quality over that of normal GC operation, in which the overlapping peaks interfere with measurement of peak response in the normal mode.     

Simultaneous determination of 109 pesticides in unpolished rice by a combination of gel permeation chromatography and Florisil column purification, and gas chromatography/mass spectrometry

A multi-residue method is described for the simultaneous analysis of 109 pesticides with different properties in unpolished rice. The range covers organophosphorus, organochlorine, carbamate, and synthetic pyrethroid pesticides. The pesticides were extracted from the sample using ethyl acetate. Most higher molecular weight components such as lipids in the co-extractives were removed by gel permeation chromatography (GPC) with a Bio-bead SX-3 column. A Florisil column with ethyl acetate/hexane as the eluting solvents was used for further cleanup. The pesticides were finally simultaneously determined by gas chromatography/mass spectrometry (GC/MS) in selective ion monitoring (SIM) mode. The average recoveries for most pesticides (spiked level 0.02, 0.1 and 1 microg/g) ranged from 70% to 110%, the relative standard deviation (RSD) was below 20% in every case, and the limit of detection (LOD) varied from 1 to 20 ng/g.     

Multiresidue pesticide analysis in ginseng and spinach by nontargeted and targeted screening procedures

Five different mass spectrometers interfaced to GC or LC were evaluated for their application to targeted and nontargeted screening of pesticides in two foods, spinach and ginseng. The five MS systems were capillary GC/MS/MS, GC-high resolution time-of-flight (GC/HR-TOF)-MS, TOF-MS interfaced with a comprehensive multidimensional GC (GCxGC/TOF-MS), an MS/MS ion trap hybrid mass (qTrap) system interfaced with an ultra-performance liquid chromatograph (UPLC-qTrap), and UPLC interfaced to an orbital trap high resolution mass spectrometer (UPLC/Orbitrap HR-MS). Each MS system was tested with spinach and ginseng extracts prepared through a modified quick, easy, cheap, effective, rugged, and safe (QuEChERS) procedure. Each matrix was fortified at 10 and 50 ng/g for spinach or 25 and 100 ng/g for ginseng with subsets of 486 pesticides, isomers, and metabolites representing most pesticide classes. HR-TOF-MS was effective in a targeted search for characteristic accurate mass ions and identified 97% of 170 pesticides in ginseng at 25 ng/g. A targeted screen of either ginseng or spinach found 94-95% of pesticides fortified for analysis at 10 ng/g with GC/MS/MS or LC/MS/MS using multiple reaction monitoring (MRM) procedures. Orbitrap-MS successfully found 89% of 177 fortified pesticides in spinach at 25 ng/g using a targeted search of accurate mass pseudomolecular ions in the positive electrospray ionization mode. A comprehensive GCxGC/TOF-MS system provided separation and identification of 342 pesticides and metabolites in a single 32 min acquisition with standards. Only 67 or 81% of the pesticides were identified in ginseng and spinach matrixes at 25 ng/g or 10 ng/g, respectively. MS/MS or qTrap-MS operated in the MRM mode produced the lowest false-negative rates, at 10 ng/g. Improvements to instrumentation, methods, and software are needed for efficient use of nontargeted screens in parallel with triple quadrupole MS.     

Evaluation of comprehensive two-dimensional gas chromatography with micro-electron capture detection for the analysis of seven pesticides in sediment samples

A GC-μECD and a GC×GC-μECD method were developed for the analysis of pesticides in sediments. For 1D-GC, instrumental LOD and LOQ were found in the range from 0.60 to 2.31μgL(-1) and 1.83 to 5.62μgL(-1), respectively. For GC×GC method development two sets of columns were tested (DB-5/DB-17ms, and HP-50+/DB-1ms), and the best results were obtained with the set of columns DB-5/DB-17ms. Instrumental LOD and LOQ were found in the range from 0.08 to 1.07μgL(-1) and 0.25 to 3.23μgL(-1), respectively. The LOD for the GC×GC was about 36% lower than those obtained for the 1D-GC. Concentrations of 21.18μgkg(-1) through 1D-GC method and 3.34μgkg(-1) for GC×GC for trifloxystrobin were found in a sediment sample which was collected close to an area of rice plantation.     

Validation study on 660 pesticide residues in animal tissues by gel permeation chromatography cleanup/gas chromatography-mass spectrometry and liquid chromatography-tandem mass spectrometry

A new method using gel permeation chromatography (GPC) cleanup followed by gas chromatography-mass spectrometry (GC-MS) and liquid chromatography-tandem mass spectrometry (LC-MS-MS) has been established for quantitative determination of 437 pesticide residues in animal tissues such as beef, mutton, pork, chicken, and rabbit. Based on an appraisal of the characteristics of both GC-MS and LC-MS-MS, validation experiments were conducted for 660 pesticides. In the method, 10 g animal samples were mixed with 20 g sodium sulfate and extracted with 35 mL of cyclohexane+ethyl acetate (1+1) twice by blender homogenization, centrifugation, and filtration. Evaporation was conducted and an equivalent of 5 g sample was injected into a 400 mm x 25 mm S-X3 GPC column, with cyclohexane+ethyl acetate (1+1) as the mobile phase at a flow rate of 5 mL/min. The 22-40 min fraction was collected for subsequent analysis. For the 368 pesticides determined by GC-MS, the portions collected from GPC were concentrated to 0.5 mL and exchanged with 5 mL hexane twice. For the 69 pesticides by LC-MS-MS, the portions collected from GPC were dissolved with acetonitrile+water (60+40) after taking the extract to dryness with nitrogen gas. In the linear range of each pesticide, the correlation coefficient was r > or = 0.98, exceptions being dinobuton, linuron, and fenamiphos sulfoxide. At the low, medium and high three fortification levels of 0.2-4800 microg/kg, recoveries fell within 40-120%, among which 417 pesticides recoveries between 60% and 120%, accounting for 95%, 20 analytes between 40% and 60%, accounting for 5%. The relative standard deviation was below 28% for all 437 pesticides. The limits of detection for the method were 0.2-600 microg/kg, depending on each pesticide.     

Evaluation of two fast and easy methods for pesticide residue analysis in fatty food matrixes

Two rapid methods of sample preparation and analysis of fatty foods (e.g., milk, eggs, and avocado) were evaluated and compared for 32 pesticide residues representing a wide range of physicochemical properties. One method, dubbed the quick, easy, cheap, effective, rugged, and safe (QuEChERS) method for pesticide residue analysis, entailed extraction of 15 g sample with 15 mL acetonitrile (MeCN) containing 1% acetic acid followed by addition of 6 g anhydrous magnesium sulfate and 1.5 g sodium acetate. After centrifugation, 1 mL of the buffered MeCN extract underwent a cleanup step (in a technique known as dispersive solid-phase extraction) using 50 mg each of C18 and primary secondary amine sorbents plus 150 mg MgSO4. The second method incorporated a form of matrix solid-phase dispersion (MSPD), in which 0.5 g sample plus 2 g C18 and 2 g anhydrous sodium sulfate was mixed in a mortar and pestle and added above a 2 g Florisil column on a vacuum manifold. Then, 5 x 2 mL MeCN was used to elute the pesticide analytes from the sample into a collection tube, and the extract was concentrated to 0.5 mL by evaporation. Extracts in both methods were analyzed concurrently by gas chromatography/mass spectrometry and liquid chromatography/tandem mass spectrometry. The recoveries of semi-polar and polar pesticides were typically 100% in both methods (except that basic pesticides, such as thiabendazole and imazalil, were not recovered in the MSPD method), but recovery of nonpolar pesticides decreased as fat content of the sample increased. This trend was more pronounced in the QuEChERS method, in which case the most lipophilic analyte tested, hexachlorobenzene, gave 27 +/- 1% recovery (n=6) in avocado (15% fat) with a<10 ng/g limit of quantitation.     

GC/IMS and GC/MS analysis of pre-concentrated medical and biological samples

Ion mobility spectrometry (IMS) is a well-known analytical method for the detection of CWAs and explosives since many years. Coupling IMS to GC pre-separation, new application fields in medicine and biology could be opened, dealing with complex and humid mixtures. However, identification of unknowns in such a complex sample is challenging and can only be achieved by parallel GC/MS analysis, thus obtaining a proposal for the responsible compound for validation via reference substances by GC/IMS again. The available adsorption tools for such accompanying GC/MS analysis have their particular drawbacks (e.g. problematic quantification for SPME, high sample volumes for adsorption tubes). Therefore miniaturised adsorption needles (NeedleTrap) were applied to both GC/IMS and GC/MS for validation of their reproducibility. It could be demonstrated that the needles can even be used for appropriate quantification when the adsorbent and the sample volume are adapted properly to the concentration range, the compounds of interest and humidity of the sample. The method is very flexible with regard to the concentration range by variation of the sample volume (e.g. 20 mL for ppt_V, 10 mL for lower ppb_V or 1 mL for ppm_V) and with regard to the compounds of interest by application of common adsorption materials optimised for the relevant substance group. Such materials are available commercially in a broad variability. Therefore, the miniaturised adsorption needles are a helpful complementary sampling method for any GC/MS or GC/IMS investigations.     

微波萃取气相色谱法测定淀粉中14种有机氯农药残留

建立了淀粉中14种有机氯农药:六六六及滴滴涕的4种异构体、五氯硝基苯、四氯硝基苯、四氯苯胺、五氯苯胺、腐霉利、甲基五氯苯基硫醚(MPCPS)的微波辅助和气相色谱分析方法.优化了气相色谱检测条件,考察了提取方法、萃取条件、净化条件对提取效果的影响.目标农药在20～200 μg/kg范围内线性良好,平均回收率在68%～10...