自组装α-Fe2O3亚微米球的制备及其光催化性质

在乙二醇体系中, 通过简单的二步方法成功合成了α-Fe₂O₃亚微米球。第一步,以Fe(NO)₃和C₆H₁₂N₄为主要反应物160 ℃溶剂热反应8h制备出前驱体;第二步,煅烧前驱体成功合成了斜方相的α-Fe₂O₃产物。利用X射线粉末衍射(XRD),扫描电子显微镜(SEM),透射电子显微镜(TEM),红外吸收光谱(FTIR),能谱分析(EDS)和热重分析(TGA)等手段对产物进行了表征。在300 W紫外灯(主波长为365 nm)照射下降解一定浓度的甲基橙溶液,研究不同光催化剂对甲基橙溶液降解效果。由于制备产物的形貌和粒径影响其比表面积和对反应物的吸附能力以及带隙能,使得制备产物具有良好的光催化性能。结果表明,α-Fe₂O₃亚微米球在紫外光照射条件下对甲基橙溶液有光降解作用。     

球形α-Fe2O3纳米粉体的超声水解法合成与表征

Hematite (α-Fe₂O₃) nanopowder was synthesized from 0.1 mol·L^-1 FeCl₃ solution by sonochemical hydrolysis method, and characterized by X-ray diffraction (XRD), transmission electron micrograph (TEM), Fourier transform infrared (FTIR), Fourier transform Raman (FT-Raman) and X-ray photoelectron spectroscopy (XPS). The results showed that the spherical, well-dispersed α-Fe₂O₃ nanopowder was obtained with the average size of 20 nm. The possible mechanism for the formation of α-Fe₂O₃ nanoparticals was also discussed.     

回流水热合成均分散纳米α-Fe2O3单晶粒子

系统地研究了以Fe(NO₃)₃为原料，回流水热合成均分散α-Fe₂O₃纳米粒子。实验结果显示:当pH=1时，随着水热时间的增加，由透射电镜测试可知，多孔性纺锤形α-Fe₂O₃单晶转变成粒径在45 nm左右的均分散菱形单晶;而Fe(NO₃)₃用氨水中和形成Fe(OH)₃凝胶后，随着初始pH值的增加，完全转变成α-Fe₂O₃所需的时间增加、粒径减小，但产物的结构更为完整。另外通过实验发现，反应体系中存在的电解质对α-Fe₂O₃晶体的生成有促进作用。同时对初始pH值及电解质对α-Fe₂O₃生成速率的影响机理进行了分析。     

纺锤形α-Fe2O3粒子的溶液催化合成

以Fe₂(SO₄)₃为原料, 在pH为4～7、微量催化剂Fe^2＋离子及晶体助长剂NaH₂PO₄存在下, 沸腾回流, 短时间可直接成长出纺锤形α-Fe₂O₃超细粒子. 与强迫水解法和水热法比较, 该方法具有操作简单、反应物浓度高、反应条件温和及重现性好等优点. 同时研究了各种因素对产物的轴比及相转化速率的影响.     

准球形α-Fe2O3的形成过程研究

The formation process of pseudo-spherical α-Fe₂O₃ particles obtained through the hydrolysis of 0.01 mol·L^-1 FeCl₃ solution was studied by means of TEM and XRD. The results show that the growth of α-Fe₂O₃ nuclies is through the diffusion mechanism. Although the presence of CTAB in the FeCl₃ solution has no effect on the growth process of pseudo-spheric α-Fe₂O₃ particles, more uniform particles are obtained, and the particles are self-assembled to form two-dimensional ordered structure due to the effect of CTAB. The optical character of these α-Fe₂O₃ particles was investigated, and the band-gap of which is about 2.49 eV.     

硅酸盐对Ferrihydrite相转化为α-Fe2O3微粒形貌的调控作用

以Ferrihydrite(又称水合氧化铁hydrous iron oxide)为反应前驱物, Fe(II)为催化剂, 在微量Na₂SiO₃存在下, 控制pH＝6～9范围内合成出了亚微米级纺锤形和准立方形α-Fe₂O₃微粒. 研究了初始pH, Na₂SiO₃浓度, Ferrihydrite老化方式对相转化时间和产物形貌的影响, 利用XRD, SEM等手段对产物进行了表征. 结果表明, Na₂SiO₃对Ferriihydrite催化相转化有一定的抑制作用, 是影响其相转化过程及产物形貌的关键. 在弱碱性条件下, [Si]/[Fe^3＋]为0.01时可直接获得纺锤形(轴比≥2)或准立方形(300～400 nm) α-Fe₂O₃粒子, 并对形成机理进行了初步讨论.     

纳米γ-Fe2O3粉体的合成与磁性增强研究

采用微乳法合成出氧化铁的前驱体——纳米β-FeOOH, 分别以β-FeOOH与添加剂壬基酚聚氧乙烯醚(NP-4)以物质量的比(n)为4, 5, 100添加NP-4, 混合煅烧. 采用拉曼光谱分析了样品中炭含量及分布, 并且用透射电镜观测产物的形貌和粒径, 采用磁强计观测产物磁性的变化. 结果得出, 对n＝5或破乳所得凝胶煅烧, 所得样品皆为分散均匀的四方形颗粒状, 且为磁性明显增强的纳米氧化铁γ-Fe₂O₃. 还分别讨论了样品中炭含量以及颗粒形状对比饱和磁化强度σ_s、矫顽力、矩形比的影响.     

α-Fe2O3负载Ag复合纳米材料的制备、表征和气敏性能

采用简单的FeCl3溶液水热方法, 结合焙烧处理合成了α-Fe2O3 纳米粉体; 以所制备的α-Fe2O3为载体负载Ag纳米粒子, 得到Ag/α-Fe2O3 复合纳米材料. 使用X射线衍射、 透射电子显微镜、 氮气吸附-脱附和X射线光电子能谱等对样品进行表征, 并考察了Ag/α-Fe2O3复合材料在260℃下对甲醇、 乙醇、 乙醚、 丙酮、 正丁醇和正己醇等挥发性有机物的气敏行为. 结果表明, Ag/α-Fe2O3传感器对这几种挥发性有机物展示了较高的灵敏度和快速、 可逆的响应-恢复特性; 与纯α-Fe2O3相比, Ag/α-Fe2O3复合材料的气敏性能显著提高, 这可能与该复合材料表面独特的多孔结构和活性Ag纳米粒子对敏感反应的催化作用有关.     

MgFe2O4-Fe2O3纳米粉体的软化学合成及电磁学特性

Nano-MgFe₂O₄-Fe₂O₃ magnetic powders were synthesized by citrate gel under microwave irradiation. The structure，particle size distribution，electromagnetic characteristics of nano-MgFe₂O₄-Fe₂O₃ were characterized by using TG-DTA, X-ray, electronic microscope, nano-size measurement and electromagnetism measurement apparatus。The results show that the product is a mixture of MgFe₂O₄ and Fe₂O₃ with average size of 44 nm, tanδ for the product is 0.265 and 0.610 at frequency of 1.0 GHz and 1.8 GHz respectively.     

γ-Fe2O3纳米粒子的(湿)固相研磨法制备研究

在聚乙二醇(PEG-400)存在下,于室温下研磨适量FeCl3与NaOH的混合物制备了γ-Fe2O3纳米粒子.所得各样品用XRD,Mossbauer谱,TEM,Tg-DTA和FTIR等手段进行了表征.结果表明,研磨后的样品经60℃干燥2h后即可得结晶较差的γ-Fe2O3纳米粉体,经450℃热处理1h后得粒径约为30nm结晶较好的γ-Fe2O3纳米粒子,经500℃热处理1h后得到粒径约为40nm、结晶完好的γ-Fe2O3纳米粒子.     

5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成

以5-雄烯二醇为原料,用微生物转化的方法合成了两个重要的神经甾体5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇。所用菌种总枝毛霉为我们自己筛选,并首次应用于5-雄烯-3β, 7α, 17β-三醇和5-雄烯-3β, 7β, 17β-三醇的合成中。     

Facile Preparation of Homoallyl β′，γ′—Unsaturated Amines via 1,2—Addition of α，β—Unsaturated Imines with Allylsamarium Bromide

A series of homoallyl β′，γ′-unsaturated amines were synthe sized via 1,2-addition of α，β-unsaturated imines with allylsamarium bromide in excellent yields under mild and neutral conditions.     

SmI2－Mediated Addition Reaction of α－Halomethylsulfones to Carbonyl Compounds. A Convenient Synthesis of β－Hydroxysulfones

Due to the chemoselective dehalogenation by SmI2, the addition of a-halomethylsulfones to carbonyl compounds afforded ,β-hydroxysulfones. Those reactions with α-bromomethylsulfones gave the products in moderate to good yields. The SmI2-mediated addition of gem-dihalomethylsulfones to ketones also afforded α-halo-β-hydroxysulfones in moderate yields.     

Selective α-Bromination of β-Keto Esters in Reusable PEG-400 under Mild and Catalyst-free Conditions

An efficient bromination protocol for the synthesis of α-bromo-β-keto esters has been developed. In PEG-400 （poly（ethylene glycol-400））, a variety of β-keto esters were treated with NBS （N-bromosuccinimide） at room temperature to selectively afford the corresponding α-monobromination products in excellent yields. It is noteworthy that the reaction was conducted under mild, environmentally benign and catalyst-free conditions.     

Catalytic Hydrogenation of α,β-Epoxyketones to β-Hydroxyketones with Two Sulfinyl Analogues of Coenzyme NADH Models

An efficient method for the selective hydrogenation of a series of α,β-epoxyketones to β-hydroxyketones using catalytic amount of two sulfinyl analogues of NAD^＋ model compounds is reported. The lack of any diastereoselectivity for the formation of β-hydroxyketones with optically pure sulfinyl analogue of NAD^＋ model supports the radical mechanism proposed previously.     

胆甾-4α-甲基-8-烯-3β，7α-二醇二乙酸酯的结构与性质研究

Lophenol, cholest-4α-methyl-7-en-3β-ol (1), obtained from Dracaena cochinchinensis (Lour.) S. C. Chen, was structurally modified. It was acetylated to protect 3β-hydroxyl group, and then oxidised by selenium dioxide in acetic acid to give cholest-4a-methyl-8-en-3β, Ta-diol diacetate (3). This compound 3 is unstable in chloroform solution or when heated and easily converted to a diene compound, cholest-4a-methyl-7,14-dien-3β-ol acetate (4). The structures of 3 and 4 were elucidated by means of IR, ^1H NMR, ^13C NMR and MS, and the absolute configuration of 3 was established by X-ray crystallography. The property of 3 was also discussed in this paper. Both 3 and 4 are new compounds and were reported for the first time.     

Michael-Addition Reaction of Malononitrile with α,β-Unsaturated Cycloketones Catalyzed by KF／Al2O3

A series of KF/Al2O3 catalyzed Michael-addition reactions between malononitrile and α,β-unsaturated cycloketones in DMF solution were studied. At room temperature, 2-cyano-3-aryl-3-(1,2,3,4-tetrahydronaphthalen-1-one-2-yl) propionitrile derivatives were synthesized by the reaction between 2-arylmethylidene-1,2,3,4-tetra-hydronaphthalen-1-one and malononitrile. However, if the temperature was increased to 80℃, 2-amino-3-cyano-4-aryl-4H-benzo[h]chromene derivatives were obtained in high yields. When the α,β-unsaturated ketones were replaced by 2,6-biarylmethylidenecyclohexanone or 2,5-biarylmethylidenecyclopentanone, another series of 2-amino-3-cyano-4H-pyran derivatives was isolated successfully. The structures of the products were confirmed by X-ray diffraction analysis.     

Synthesis,characterization, and catalytic application of Fe3O4‐Si‐[CH2]3‐N=CH‐aryl for the efficient synthesis of novel poly‐substituted pyridines

Fe₃O₄ magnetic nanoparticles (MNPs) were functionalized by aminopropylsilane and reacted with aromatic aldehyde, and Fe₃O₄‐Si‐[CH₂]₃‐N=CH‐Aryl and Fe₃O₄‐Si‐(CH₂)₃‐NH‐CH₂‐Aryl MNPs were prepared as novel magnetic nanocatalysts. Fourier transform infrared (FT‐IR), X‐ray diffraction (XRD), and scanning and transmission electron microscopy (SEM and TEM) were used to identify the MNPs. The catalytic activity of the MNPs was evaluated in the one‐pot synthesis of some novel poly‐substituted pyridine derivatives.