Eu(BSA)3phen与PVK共混体系的光致和电致发光特性的研究

合成了一类新型的以苯甲酰水杨酸(benzoyl salicylic acid,BSA)为第一配体,邻菲罗啉(1,10-phenanthroline,phen)为第二配体的稀土配合物Eu(BSA)3phen,将导电高分子材料PVK引入到配合物中,制成了结构为ITO/PVK:RE配合物/LiF/Al的电致发光器件.通过测量电致发光和光致发光光谱,发现PVK:RE配合物混合体系存在着能量传递,并对Eu(BSA)3phen与PVK共混体系的光致发光和电致发光机制进行了分析.同时比较了几种不同PVK掺杂浓度对于器件性能的影响.     

一类新型稀土配合物的合成与发光特性研究

合成了一类新型稀土配合物Eu(asprin)3phen和Tb(asprin)3phen,并将其掺杂到导电聚合物PVK中,制成结构了为ITO／PVK：RE配合物／LiF/Al的电致发光器件。很明显,在相同掺杂比例下,前者的电致发光中PVK发射所占比例较大,而后者的电致发光中PVK的发射几乎全部被覆盖掉了,进一步研究发现它们的光致发光中也有同样现象存在,这表明具有同等配体的此类铕、铽配合物的特性存在很大差别,并对这一差别作了初步讨论。     

铽配合物Tb(o-BBA)3(phen)有机电致发光研究

合成了一种新的稀土配合物邻苯甲酰苯甲酸-1，10-菲罗啉-铽（Tb（o-DDA）3（phen））并用于有机电致发光。研究了Tb（o-DDA）3（phen）与PVK混合薄膜的光敛发光特性，找出了PVK：Tb的最佳比例为3：1。制备了结构为ITO／PVK：Tb／Al的单层电致发光器件，得到了铽离子的特征光谱，其电流-电压特性（I-V）在一定电压范围内符合空间电荷限制电流机制。研究结果表明稀土铽配合物Tb（o-BBA）3（phert）掺杂PVK体系的光致发光是源于PVK到Tb配合物的能量传递及稀土Tb配合物的直接激发两种作用机制，而电致发光以载流子俘获为主。     

铽配合物TbY(o-MBA)6(phen)2与PVK掺杂体系的发光性质研究

合成了一种新型的稀土铽配合物材料TbY(o-MBA)6(phen)2,把它作为发光材料应用于有机电致发光中.把铽配合物掺杂在导电聚合物PVK中采用旋涂法制得发光层,并利用AlQ作为电子传输层制作了多种结构的电致发光器件 器件A,ITO/PVK∶TbY (o-MBA)6(phen)2/LiF/Al;器件B,ITO/PVK∶TbY (o-MBA)6(phen)2/AlQ/LiF/Al;器件C,ITO/PVK∶TbY (o-MBA)6(phen)2/BCP/AlQ/LiF/Al.对器件A和B得到了纯正的、明亮的Tb3+离子的绿光发射,4个特征峰分别对应着能级5D4到7Fj(j=6,5,4,3)的跃迁,而PVK的发光完全被抑制.研究了掺杂体系的光致发光性能和电致发光性能,认为在光致发光中,铽的发光主要来源于PVK到稀土配合物的Frster能量传递.而在电致发光中,铽的发光主要来源于稀土配合物直接捕获载流子形成激子复合发光.并通过优化选择得到了发光性能较好的器件B,其最大亮度在14 V时达到213 cd·m-2.     

稀土配合物Tb(p-MBA)3phen的有机电致发光

合成了一种新型的稀土铽配合物材料Tb(p-MBA)3phen,把它作为发光材料应用于有机电致发光中.把铽配合物掺杂在导电聚合物PVK中采用旋涂法制得发光层,并利用AlQ作为电子传输层制作了单层、双层有机电致发光器件:器件1(ITO/PVK):Tb(p-MBA)3phen/Al;器件2(ITO/PVK):Tb(p-MBA)3phen/AlQ/LiF/Al,得到了纯正的、明亮的Tb3 离子的绿光发射,4个特征峰分别对应着能级5D4到7Fj(j=6,5,4,3)的跃迁,而PVK的发光完全被抑制.研究了两种器件的电致发光性能,并通过选择AlQ的厚度得到了发光性能较好的器件,其最大亮度在20 V时达到152 cd·m-2.     

铽配合物[Tb(m-MBA)3phen]2·2H2O的有机电致发光

将稀土铽配合物[Tb(m MBA)3phen]2·2H2O作为发光材料应用于有机电致发光。把铽配合物掺杂在PVK中经甩膜制得发光层,并分别用AlQ和PBD作为电子传输层制作了两类有机电致发光器件。器件1:ITO PVK:[Tb(m MBA)3phen]2·2H2O PBD LiF Al;器件2:ITO PVK:[Tb(m MBA)3phen]2·2H2O AlQ LiF Al,研究了两种器件的电致发光性能,并通过选择AlQ的厚度得到了发光性能较好的用AlQ作为电子传输材料的器件,其最大亮度在20V时达到140cd·m-2。     

一种含铽单体的合成及其电致发光研究

合成了一种具有聚合活性的含铽配合物单体(Tb(acac)~2(AA)phen),并用红外光谱、元素分析等进行表征。研制了结构为ITO/PVK/Tb(acac)~2(AA)phen/Alq^3/Al的电致发光器件并测定了它的电致发光谱、电流-电压特性、亮度-电压曲线等性能。该器件具有良好的整流特性,其电致发光显示了铽离子的绿光特征发射,并具有较好的单色性。同时,探讨了该器件的电致发光机理。     

共掺杂稀土配合物Tb0.5Eu0.5(asprin)3phen电致发光的研究

合成了共掺杂稀土配合物Tb0.5Eu0.5(asprin)3phen，将其掺杂到导电聚合物PVK中，制成结构为ITO／PVK：RE配合物／PBD／Al的电致发光器件，与PVK：Eu(asprin)3phen体系为发光层的相同结构的器件相比，我们发现铽离子的引入能猝灭PVK的发光，增强铕的发光，而Tb3 本身的发光很弱，几乎看不到，说明Pb3 在其中起到能量的中间传递作用，促进了PVK到Eu^3 的能量传递，本文就器件的发光特性及掺杂体系的能量传递进行了初步讨论。     

稀土铽配合物TbY(m-MBA)6(phen)2·2H2O的有机电致发光

合成了两种新型稀土配合物[Tb(m-MBA)3phen]2·2H2O和TbY(m-MBA)6(phen)2·2H2O, 将其掺杂到导电聚合物PVK中用于有机电致发光器件的发光层, 这样改善了配合物的成膜特性和导电性质. 用这种搀杂体系分别制作了单层发光器件和以AlQ为电子传输层的双层器件. 研究了这些单、双层器件的电致发光性能, 对比了以[Tb(m-MBA)3phen]2·2H2O为发光层的双层器件和以TbY(m-MBA)6(phen)2·2H2O为发光层的器件, 发现后者效率更高, 为0.88 cd·A-1, 其最大亮度为123 cd·m-2.     

新型稀土芳香羧酸类配合物的合成及其光致和电致发光性质

合成了新型可溶性稀土芳香羧酸类配合物，测定了有机配体的三重态能级，并考察了其光致发光相对强度、荧光寿命，发现该系列稀土配合物具有很高的光致发光效率。利用其优良的溶解性，采用高聚物掺杂、旋涂技术将其制成薄膜应用于电致发光研究中，成功地制备出具有高色纯度的稀土有机电致发光器件。对于ITO／PVK／PVK：Tb(AS)3Phen：PBD／PBD／Al电致发光器件，其最大亮度为32cd．m^-2。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.