General Route to Synthesize Monodisperse Oxide (Hydroxide) Nanoparticles

Mono-dispersed oxide and hydroxide nanoparticles have been synthesized through the solvothermal process in alcohol-water mixtures. The products were characterized by powder x-ray diffraction (XRD) and scanning electron microscopy (SEM). Plate-like nanoparticles are obtained for Bi₂O_2.33, Fe₂O₃, and Cd(OH)₂, and spherical nanoparticles are obtained for SnO₂. The growth mechanism for the mono-dispersed nanoparticles has been preliminarily discussed.     

Regioselective Ring Opening of Styrene Oxide Catalyzed by MoO2(acac)2

The ring-opening reaction of styrene oxide with various nitrogen, oxygen, and carbon nucleophiles catalyzed by MoO₂(acac)₂ was described. The corresponding ring-opening compounds with nearly 100% regioselectivities were obtained under mild conditions in moderate to good yields. MoO₂(acac)₂ is a highly efficient catalyst for the ring opening of styrene oxide. The reaction serves as a simple and efficient method for the synthesis of 1,2-bifunctional compounds.     

Synthesis of novel 3-bromo-1,2-dihydroquinolines via palladium mediated intramolecular cyclization of N-tosyl-N-propargyl anilines

Facile synthesis of novel 3-bromo-1,2-dihydroquinolines by the intramolecular cyclization of N-tosyl-N-propargyl anilines catalyzed by Pd(OAc)₂ in conjunction with CuBr₂ and LiBr.     

Preparation of ZrO2-TiO2-CeO2 and Its Application in the Selective Catalytic Reduction of NO with NH3

TiO₂,ZrO₂-TiO₂,andZrO₂-TiO₂-CeO₂ were prepared by co-precipitation method and characterized by X-ray diffraction (XRD), specific surface area measurements (BET), temperature programmed desorption (NH₃-TPD), oxygen storage capacity (OSC), and temperature programmed reduction (H₂-TPR). The results showed that ZrO₂-TiO₂-CeO₂ exhibited large number of surface strong acid, possessed some oxygen storage capacity, and strong redox property. The three materials were used as supports and the monolith catalysts were prepared with 1% (w) V₂O₅ and 9% (w)WO₃ for selective catalytic reduction (SCR) of NO with ammonia in the presence of excessive O₂, and the results of catalytic activity showed that the catalyst used ZrO₂-TiO₂-CeO₂ as support yielded nearly 100% NO conversion at 275 °C at a gas hourly space velocity (GHSV) of 10000 h⁻¹, and it had the best catalytic activity and showed great potential for practical application.     

Syntheses of MO2 (M=Si, Ce, Sn) nanoparticles by solid-state reactions at ambient temperature

Nano oxides (SiO₂, CeO₂, SnO₂) were successfully synthesized by solid-state reactions at ambient temperature. The nanoparticles were characterized by X-ray powder diffraction, TEM, BET, and TGA-DTA. The SiO₂ particles were also investigated using IR spectra. Effects of calcination on the nanoparticles were studied in this paper. The solid-state reaction technique is a convenient, inexpensive and an effective preparation method of monodisperse oxide nanoparticles in high yield. The mechanisms of the formation of nano materials by solid-state reactions at ambient temperature were primarily investigated.     

A comparative study on the dispersion behaviors and surface acid properties of molybdena on CeO2 and ZrO2 (Tet)

Dispersion of molybdena on CeO₂, ZrO₂ (Tet), and a mixture of CeO₂ and ZrO₂ (Tet), was investigated by using laser Raman spectroscopy (LRS), Fourier transform infrared spectroscopy (FT-IR), X-ray diffraction (XRD) and temperature programmed reduction (TPR). The results indicate that molybdena is dispersed on both individual oxide support and mixed oxide support at the adopted molybdena loadings (0.2 and 0.8 mmol Mo⁶⁺/100 m²) and the structure of the supported molybdena species is intimate association with its loading amount. Two molybdena species are identified by Raman results, i.e. isolated MoO²⁻₄ species at 0.2 mmol Mo⁶⁺/100 m² and polymolybdate species at 0.8 mmol Mo⁶⁺/100 m². IR spectra of ammonia adsorption prove that isolated MoO²⁻₄ species are Lewis acid sites on the Mo/Ce and/or Zr samples, and the polymolybdate species are Brönsted acid sites on the Mo/Ce and/or Zr samples. Moreover, a combination of the Raman, IR and TPR results confirms that at 0.2 mmol Mo⁶⁺/100 m² Ce + Zr, molybdena is preferentially dispersed on the surface of CeO₂ when a mixed oxide support (CeO₂ and ZrO₂) is present, which was explained in term of the difference of the surface basicity between CeO₂ and ZrO₂ (Tet). Surface structures of the oxide supports were also taken into consideration.     

Rapid access to homoallylic alcohols via Pd(OAc)2 catalyzed Barbier type allylation in presence of DMAP

DMAP was found to accelerate significantly the rate of Pd(OAc)₂ catalyzed Barbier type allylation of carbonyl compounds by allylbromide using SnCl₂·2H₂O as reducing agent. Both aldehyde as well as ketones produced excellent yields within a short reaction time in the presence of 3 mol % of Pd(OAc)₂ and 12 mol % of DMAP at room temperature. Aldehydes could be allylated within 5–10 min whereas, in case of ketones, the reaction completes in 45–120 min.     

Why pressure induces an abrupt structural rearrangement in PdTe2 but not in PtTe2

High-pressure X-ray diffraction measurements were carried out for polymeric CdI₂-type compounds MTe₂ (M=Pt, Pd) to investigate if they undergo a structural phase transition under pressure as does IrTe₂. Up to 27 GPa at room temperature PtTe₂ does not undergo any structural phase transition. In contrast, however, an abrupt change in the inter-atomic distances occurs in PdTe₂ above 15.7 GPa at room temperature, and above 5 GPa at 300 °C, but the volume vs. pressure curve exhibits no discontinuity. To account for the differences between the isostructural compounds PtTe₂, PdTe₂ and IrTe₂, their electronic structures and bonding were analyzed on the basis of first principles electronic band structure calculations.     

GGA and GGA + U Study of ThMn2Si2 and ThMn2Ge2 Compounds in a Body-Centered Tetragonal Ferromagnetic Phase

Our study used the full-potential linearized augmented plane waves (FP-LAPW) method to conduct a first-principles evaluation of the structural, electronic, and magnetic properties of ThMn₂X₂ (X = Si and Ge) compounds. To establish theoretical dependability with the currently available experimental results, computations for the structural findings of ternary intermetallic thorium (Th)-based compounds were achieved using the generalized gradient approximation in the scheme of Perdew–Burke–Ernzerhof (PBE–GGA) potential, while the generalized gradient approximation plus the Hubbard U (GGA + U) approach was employed to improve the electrical and magnetic properties. In contrast with both the paramagnetic (PM) and antiferromagnetic (AFM) phases, the ThMn₂X₂ compounds were optimized in a stable ferromagnetic (FM) phase, which was more suited for studying and analyzing magnetic properties. The electronic band structures (BS) and the density of state (DOS) were computed using the two PBE–GGA and GGA + U approximations. The thorium (Th)-based ThMn₂X₂ compound has full metallic character, due to the crossing and overlapping of bands across the Fermi level of energy, as well as the absence of a gap through both spin (up and down) channels. There was a significant hybridization between (Mn-d and (X = Si and Ge)-p states of conduction band with Th-f states in the valence band. The total magnetic moment of ThMn₂Si₂ in the ferromagnetic phase was 7.94534 μB, while for ThMn₂Ge₂ it was 8.73824 μB with a major contribution from the Mn atom. In addition, the ThMn₂Ge₂ compound’s total magnetic moment confirmed that it exhibits higher ferromagnetism than does the ThMn₂Si₂ compound.     

Synthesis and chemistry of tris(2-pyridyl)phosphine and bis(2-pyridyl)phenylphosphine complexes of mercury(II) X (X = Br,Cl) and X-ray crystal structural determination of [HgBr2(PPh(2-py)2)2]

Mercury(II) halide complexes [HgX₂(P(2-py)₃)₂] (X?=?Br (1), Cl (2)) and [HgX₂(PPh(2-py)₂)₂] (X?=?Br (3), Cl (4)) containing P(2-py)₃ and PPh(2-py)₂ ligands (P(2-py)₃ is tris(2-pyridyl)phosphine and PPh(2-py)₂ is bis(2-pyridyl)phenylphosphine) were synthesized in nearly quantitative yield by reaction of corresponding mercury(II) halide and appropriate ligands. The synthesized complexes are fully characterized by elemental analysis, melting point determination, IR, ¹H, and ³¹P-NMR spectroscopies. Furthermore, the crystal structure of [HgBr₂(PPh(2-py)₂)₂] determined by X-ray diffraction is also reported.     

Copper(II) triflate promoted cycloaddition of α-alkyl or aryl substituted N-tosylaziridines with nitriles: a highly efficient synthesis of substituted imidazolines

Cu(OTf)₂ or Zn(OTf)₂ mediated [3+2] cycloaddition reactions of various α-alkyl or aryl substituted N-tosylaziridines with nitriles is described for the syntheses of substituted imidazolines. A mechanism for the cycloaddition is proposed to rationalize the formation of a nonracemic imidazoline from optically pure aziridine.     

Gas-Sensing Property of TM-MoTe2 Monolayer towards SO2, SOF2, and HF Gases

Detecting the characteristic decomposition products (SO₂, SOF₂, and HF) of SF₆ is an effective way to diagnose the electric discharge in SF₆-insulated equipment. Based on first-principles calculations, Au, Ag, and Cu were chosen as the surface modification transition metal to improve the adsorption and gas-sensing properties of MoTe₂ monolayer towards SO₂, SOF₂, and HF gases. The results show that Au, Ag, and Cu atoms tend to be trapped by T_H sites on the MoTe₂ monolayer, and the binding strength increases in the order of Ag < Au < Cu. In gas adsorption, the moderate adsorption energy provides the basis that the TM-MoTe₂ monolayer can be used as gas-sensing material for SO₂, SOF₂, and HF. The conductivity of the adsorption system changes significantly. The conductivity decreases upon gases adsorption on TM-MoTe₂ monolayer, except the conductivity of Ag-MoTe₂ monolayer increases after interacting with SOF₂ gas.     

一个新的双核锌配合物Zn2(dhaash)2(py)4的合成及晶体结构

The crystal of binuclear zinc complex Zn₂(dhaash)₂(py)₄ was obtained in DMF and pyridine, where H₂dhaash is 2,4-dihydroxy-5-acetylacetophenone-N-salicylhydrazone. It has been characterized by IR, UV, element analysis and X-ray single crystal diffraction. The crystallographic data were as follows: monoclinic system, space group P2₁/c, a=1.108 98(11) nm, b=1.640 84(16) nm, c=1.445 14(14) nm, β=108.617(2)°, Z=2, V=2.492 1(4) nm³, D_c=1.466 g·cm^-3, M_r=1 099.74, μ=1.031 mm^-1, F(000)=1 136 and the final R=0.044 8 and wR=0.105 8 for 4 143 observed reflections with I≥2σ(I), respectively. The X-ray crystal structure analysis revealed that, in the centrosymmetric binuclear complex molecule, two zinc(Ⅱ) centers are linked by two oxygen atoms (O(3) and O(3A)), respectively. Zn(1)…Zn(1A) distance is 0.314 81(6) nm, O(3)…O(3A) distance is 0.270 4(2) nm. Every zinc(Ⅱ) ion has an elongated octahedral coordination. For example, the two pyridine nitrogen atoms, one oxygen atom and one nitrogen atom from salicylhydrazone, one oxygen atom from 2,4-dihydroxy-5-acetylacetophenone in one dhaash^2- ligand and one oxygen atom from 2,4-dihydroxy-5-acetylacetophenone in another dhaash^2- ligand coordinated to zinc(Ⅱ) ion, respectively. Two zinc(Ⅱ) ions and all the 72 non-hydrogen atoms in the two dhaash^2- ligands are in the same plane. CCDC: 261929.     

关于限域离子液体吸附CO_2的密度泛函理论(DFT)的研究

近年来,温室效应日趋严重,因此吸收CO_2的材料受到了广泛的关注.采用了密度泛函理论(DFT)研究以SiO_2为载体的限域离子液体对CO_2的吸附.对比纯净离子液体(ILs)以及限域离子液体与CO_2的相互作用情况,在这两种状态下两种体系的吸附情况大不相同.从几何结构、相互作用以及电荷分析等方面对ILs、 SiO_2以及ILs/SiO_2复合结构进行研究.计算结果表明,载体、离子液体和CO_2之间都存在较强的相互作用.离子液体的负载不仅改变了SiO_2载体的结构,而且受载体的影响阴阳离子之间的相互作用力也发生了改变.计算结果为进一步深入限域离子液体对CO_2的吸附打下了理论基础.     

Syntheses and characterization of two oxoborates, (Pb3O)2(BO3)2MO4 (M=Cr, Mo)

Two oxoborates, (Pb₃O)₂(BO₃)₂MO₄ (M=Cr, Mo), have been prepared by solid-state reactions below 700 °C. Single-crystal XRD analyses showed that the Cr compound crystallizes in the orthorhombic group Pnma with a=6.4160(13) Å, b=11.635(2) Å, c=18.164(4) Å, Z=4 and the Mo analog in the group Cmcm with a=18.446(4) Å, b=6.3557(13) Å, c=11.657(2) Å, Z=4. Both compounds are characterized by one-dimensional chains formed by corner-sharing OPb₄ tetrahedra. BO₃ and CrO₄ (MoO₄) groups are located around the chains to hold them together via Pb–O bonds. The IR spectra further confirmed the presence of BO₃ groups in both structures and UV–vis diffuse reflectance spectra showed band gaps of about 1.8 and 2.9 eV for the Cr and Mo compounds, respectively. Band structure calculations indicated that (Pb₃O)₂(BO₃)₂MoO₄ is a direct semiconductor with the calculated energy gap of about 2.4 eV.     

Reactions of pyridine-2-ethyl/methyl cyclopentadienes with metal carbonyls

Abstract

Thermal treatment of pyridine-2-ethyl cyclopentadiene (1) with Fe(CO)₅ and Ru₃(CO)₁₂ gave novel intramolecular C–H activated dinuclear products (3 and 5). In the case of Fe(CO)₅, the reaction also afforded the normal bis(cyclopentadienyl) diiron complex (4). However, similar reaction of pyridine-2-methyl cyclopentadiene (2) with Fe(CO)₅ and Ru₃(CO)₁₂ only afforded the normal bis(cyclopentadienyl) dinuclear metal complexes (7 and 8). For Ru₃(CO)₁₂, the reaction also yielded a pendant η¹-pyridyl-coordinated product (9). In addition, the reactions of 1 and 2 with Re₂(CO)₁₀ formed the corresponding pyridylethyl/pyridylmethyl cyclopentadienyl rhenium tricarbonyl complexes 10 and 11, which further underwent pyridine to rhenium cyclization via photoirradiation to provide the rhenium dicarbonyl complexes 12 and 13. The molecular structures of 3, 5, 6, 7, 8, 9, and 12 were determined by X-ray diffraction.     

LiCoO2梯度包覆LiNi0.96Co0.04O2电极材料的电化学性能

镍钴酸锂(LiNi0.8Co0.2O2)与目前商业用锂离子电池正极材料钴酸锂(LiCoO2)相比,具有成本低、实际比容量高和环境友好等优势。但LiNi0.8Co0.2O2的充放循环性能还有待提高,对其进行阳离子掺杂或表面修饰可以改善其电化学性能,这方面的研究已经成为热点。Fey等人[1]用溶胶凝胶法制     

SnO2TiO2 复合半导体纳米薄膜的研究进展

本文概述了SnO₂TiO₂ 复合半导体纳米薄膜的发展历史和研究现状,对比分析了“混合”、“核壳”和“叠层”3 种复合薄膜的结构和性能特点,着重论述了叠层结构的SnO₂ /TiO₂复合薄膜的光电化学和光催化特性。结合作者的研究工作,探讨了SnO₂ /TiO₂双层复合薄膜上下层厚度对其光催化活性的影响,指出复合薄膜光催化活性的提高可归因于电子从TiO₂ 向SnO₂ 的迁移。最后对SnO₂ /TiO₂复合薄膜的局限性和发展潜势做一简要分析,强调了该复合薄膜本身的应用特点。     

双介孔结构的纳米TiO2/I2复合材料的制备及其可见光催化性能

以钛酸丁酯为前驱体, 碘溶胶为碘源, 在室温下采用水解沉淀法制备了单质碘和纳米TiO₂复合的双介孔结构光催化剂(M-I₂-TiO₂). 采用X射线衍射(XRD)、透射电子显微镜(TEM)、比表面分析(BET)、紫外-可见(UV-Vis)漫反射光谱和傅里叶变换-红外光谱(FT-IR)对M-I₂-TiO₂进行了表征. 以次甲基蓝(MB)溶液为模拟废水, 对M-I₂-TiO₂的光催化性能进行了评价, 研究了不同热处理温度对光催化活性的影响. 结果表明, M-I₂-TiO₂在可见光区有显著的吸收, 300 ℃热处理得到的样品比表面积高达227.6 m²/g, 600 ℃热处理所得样品的比表面积仍高达111.8 m²/g, 而400 ℃热处理所得样品具有最好的光催化降解性能. 双介孔结构纳米TiO₂/I₂复合材料的光催化降解性能显著高于相同方法制备的纯TiO₂和Degussa P-25商业产品. 催化剂经6次重复使用其光催化活性基本保持不变.     

Supported oxorhenate catalysts prepared by thermal spreading of metal Re for methanol conversion to methylal

TiO₂-anatase and SiO₂ supported oxorhenate catalysts were prepared by an original and simple technique based on the oxidative dispersion of metallic rhenium under dry conditions. The dispersion process of the supported oxorhenate phase as a function of the rhenium coverage and the support properties are discussed on the base of in situ characterization. The structures of the as prepared catalysts were found to be comparable to those of materials prepared using the incipient wetness impregnation technique. The absence of water in the preparation technique has made it possible to highlight the role of the hydration level on the rhenium oxide volatilization. The as-prepared Re/TiO₂ catalysts were found to be effective for the direct conversion of methanol to methylal.