Reductive Cleavage of tert-Butyldimethylsilyl Ether via Intramolecular Transfer of Hydride

The cleavage of α-hydroxy tert-butyldimethylsilyl ether to diol takes place efficiently with LAH. It has been proposed that the reaction proceeds via intramolecular hydride transfer from the alkoxy aluminium hydride. In order to substantiate this, reduction of TBDMS ether with LAH in a variety of substrates was studied.     

Asymmetric intramolecular [3 + 2] cycloaddition reactions of acylhydrazones/olefins using a chiral zirconium catalyst

Catalytic asymmetric intramolecular [3 + 2] cycloaddition of hydrazone/olefins has been attained. In the presence of a chiral zirconium catalyst prepared from zirconium alkoxide and a BINOL derivative, the desired pyrazolidine derivatives were obtained in high yields with high selectivities. The products were easily converted to 1,3-diamine or beta-aminonitrile derivatives by N-N bond cleavage.     

Immobilization of BINOL by cross-linking copolymerization of styryl derivatives with styrene, and applications in enantioselective Ti and Al Lewis acid mediated additions of Et2Zn and Me3SiCN to aldehydes and of diphenyl nitrone to enol ethers

The chiral ligand 1,1'-bi-2-naphthol (BINOL) has been succesfully immobilized on polystyrene. Several dendritic and non-dendritic BINOL derivatives (3, and 13-17), bearing at least two polymerizable styryl groups, were prepared and fully characterized. Suspension copolymerization of the MOM- or TIPS-protected cross-linking BINOL ligands (MOM = methyloxymethyl, TIPS = triisopropylsilyl) with styrene, cleavage of the protecting-groups, and loading with a Lewis-acid afforded catalytically active polystyrene-supported BINOLates. The polymer-bound BINOLs p-3, and p-13-p-16 were tested in the Ti-BINOLate-mediated addition of Et2Zn to PhCHO. The enantioselectivities (up to 93%) and conversions obtained with the polymer-bound catalysts were in most cases identical (within experimental error) to those obtained with the unsubstituted 1,1'-bi-2-naphthol and with the non-polymerized BINOL cross-linkers under homogeneous conditions. Special focus was put on the reusability of the supported catalyst: the polymer-beads were used in up to 20 consecutive catalytic runs, with the best polymers showing no or only minor loss of selectivity. BINOL-polymers p-17, obtained by copolymerization of a 3,3'-distyryl-substituted BINOL 17a with styrene, were used in the BINOL. AlMe-mediated cycloaddition of diphenyl nitrone with alkyl vinyl ethers. In all cases the exo/endo selectivity (> or =92:8) and the enantioselectivities with which the exo-cycloadducts were formed (> or =95%) correspond to those observed in the homogeneous reactions. A dendritically cross-linked BINOL-polymer was also employed in the Ti-BINOLate-mediated cyanosilylation of pivalaldehyde. The enantiopurity of the cyanohydrine obtained in the first run was as high as in the homogeneous reaction (72%); surprisingly the catalytic performance of the supported catalyst increased steadily during the first catalytic cycles to reach 83%. Thus, cross-linking BINOLs can be succesfully incorporated into a polystyrene matrix (without racemization!) to give polymer-bound BINOL ligands that give excellent performance over many catalytic cycles with catalytic activities comparable with those of soluble analogues.     

Preparation and cholesteric mesophase properties of (Butyl-co-pentyl) propylcellulose

Butyl and pentyl ether derivatives of (2-hydroxypropyl) cellulose (HPC) and butyl/pentyl mixed ethers of HPC (BPPC) with different alkyl compositions were prepared in nonaqueous solution and their thermotropic cholesteric properties examined. The temperature dependence and the composition dependence of the optical pitch, nP, were then determined for all of the ether derivatives. The molecular conformation and chirality of BPPC appeared to be to be variably smooth with the side chain composition of the polymer. The response rate of cholesteric configurational change of the thermotropic mesophases arising from a temperature jump from 45  to 75 °C, was also determined. The transformation of the cholesteric mesophase formed by an equimolar ether derivative (BP-50) was faster than that of the cholesteric one formed by a single-alkyl (pentyl) ether derivative (BP-0). This seemed to be a general result reflecting a pseudo-copolymer effect of cellulose derivatives on the properties of their thermotropic cholesteric mesophases.     

NbCl5 mediated deprotection of methoxy methyl ether

An efficient cleavage of methoxy methyl ether using NbCl₅ is described. This protocol works efficiently with MOM ethers of alkyl, allyl, propargyl, benzyl alcohol and phenol derivatives. MOM esters are also found to be effectively cleaved under the present conditions.     

Structure–reactivity relationships of alkyl α‐hydroxymethacrylate derivatives

A series of alkyl α‐hydroxymethacrylate derivatives with various secondary functionalities (ether, ester, carbonate, and carbamate) and terminal groups (alkyl, cyano, oxetane, cyclic carbonate, phenyl and morpholine) were synthesized to investigate the effect of intermolecular interactions, H‐bonding, π–π interactions, and dipole moment on monomer reactivity. All of the monomers except one ester and one ether derivative are novel. The polymerization rates, determined by using photo‐DSC, showed the average trend (aromatic carbamate > hydroxyl > ester > carbonate ～ aliphatic carbamate ～ ether), with several exceptions due to the differences in terminal groups. There is a correlation between the chemical shift differences of the double bond carbons, the calculated dipole moments, and the reactivities only for nonhydrogen bonded monomers. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Radical addition to oxime ethers for asymmetric synthesis of beta-amino acid derivatives

The diastereoselective alkyl radical addition to chiral oxime ethers was studied with a view to preparing enantiomerically pure alpha,beta-dialkyl-beta-amino acid derivatives. The phase transfer-catalyzed alkylation of Oppolzer's camphorsultam derivative of oxime ether proceeded smoothly to give the alkylated N-(beta-oximino)acyl derivatives. In the presence of BF3.OEt2, radical addition to the oxime ethers proceeded using triethylborane as the radical initiator to give alpha,beta-dialkyl-beta-amino acid derivatives with excellent diastereoselectivity.     

Insight into the mechanism of the asymmetric addition of alkyl groups to aldehydes catalyzed by titanium-BINOLate species

The asymmetric addition of alkyl groups to aldehydes catalyzed by BINOLate-titanium complexes has become the testing grounds to evaluate the potential of new BINOL-based ligands. We have investigated the mechanism of this reaction and report our findings here. Model systems for the open form of the catalyst, (BINOLate)[Ti(O-i-Pr)(3)](2), based on mono-oxygen-alkylated BINOL ligands have been examined. Comparison of the reactivity and enantioselectivity of the mono-alkyl BINOL derivatives with those of BINOL indicate that the open form of the catalyst, (BINOLate)[Ti(O-i-Pr)(3)](2), is not active in the asymmetric addition reaction. Several BINOLate-titanium complexes have been synthesized and characterized by X-ray crystallography. These include the dinuclear (BINOLate)Ti(O-i-Pr)(2).Ti(O-i-Pr)(4), which contains a bridging naphtholate and isopropoxy group, trinuclear (BINOLate)Ti(O-i-Pr)(2).[Ti(O-i-Pr)(4)](2), and trimeric [(BINOL)Ti(O-i-Pr)(2)](3). The solid-state and solution structures reported here indicate that (BINOLate)Ti(O-i-Pr)(2) prefers to bind to titanium tetraisopropoxide rather than to itself, explaining why no nonlinear effects are observed in the catalytic reaction. Additionally, experimental evidence suggests that the BINOLate-titanium species responsible for the catalytic and stoichiometric asymmetric addition reactions are different, indicating that the proposed intermediate, (BINOLate)Ti(R)(aldehyde)(O-i-Pr), is not involved in either of these processes. Reactions were examined using different sources of the alkyl group [ZnMe(2) or MeTi(O-i-Pr)(3)]. Under similar conditions, it was found that the product ee's were the same, independent of whether ZnMe(2) or Me-Ti(O-i-Pr)(3) was used as the source of the alkyl groups. This indicates that the role of the dialkylzinc is not to add the alkyl group to the carbonyl but rather to transfer the alkyl group to titanium. On the basis of these results, we hypothesize that the intermediate in the asymmetric addition involves (BINOLate)Ti(O-i-Pr)(2)(aldehyde).MeTi(O-i-Pr)(3).     

Preparation and structural elucidation of the picolinyl ester of aldosterone for liquid chromatography-electrospray ionization tandem mass spectrometry

Treatment of aldosterone with 35% HCl in EtOH or in MeOH followed by the picolinyl derivatization gave the picolinyl derivative of aldosterone-ethyl ether, 8, or methyl ether, 9, as a single and well-shaped liquid chromatographic peak. Picolinyl derivatization of aldosterone produced 21-picolinyl derivative of 18,20-anhydro-hemiacetal derivatives, 6, with poor chromatographic peak with wide half-width. Further conversion of 6 to 8 required long reaction time (>4 h). Structure of each picolinyl or alkyl ether-picolinyl derivative, was carefully elucidated by nuclear magnetic resonance spectroscopy, electron ionization mass spectrometry and liquid chromatography-electrospray ionization tandem mass spectrometry (LC-ESI-MS/MS). Enhancement of sensitivity (approximately 10-fold) in positive-LC-ESI-MS/MS of aldosterone was confirmed by the use of the alkyl ether-picolinyl derivatization when compared to the underivatized molecule.     

Charge ordering and intermediate range order in ammonium ionic liquids

Molecular dynamics simulations were performed for ionic liquids based on the bis(trifluoromethylsulfonyl)imide anion, [NTf(2)], and ammonium cations with increasing length of the alkyl chain and ether functionalized chain. The signature of charge ordering is a sharp peak in the charge-charge structure factor, S(qq)(k), whose intensity is barely affected for longer carbon chain in tetraalkylammonium systems, but decreases in ether functionalized ionic liquids. The first sharp diffraction peak (FSDP) and the corresponding intermediate range order (IRO) are observed in the total S(k) of ionic liquids containing ammonium cations with relatively long chains. The intensity of the FSDP is lower in the total S(k) of the ether derivative in comparison with the tetraalkylammonium counterpart of the same chain length. It is shown that the nature of the IRO is structural heterogeneity of polar and non-polar domains, even though domains defined by chain interactions in the ether derivatives become more polar. Charge correlation in the ether derivative is modified because cations can be coordinated by oxygen atoms of the ether functionalized chain of neighboring cations.     

手性联二萘酚衍生物催化的苯乙炔与苯甲醛不对称加成反应

以手性联二萘酚为原料,合成了3,3′位取代的手性联二萘酚衍生物,研究了该衍生物配体在二乙基锌存在下,催化苯乙炔与苯甲醛的不对称加成反应,产物的产率为73%,e.e.值为40%。 研究结果表明,手性联二萘酚衍生物结构的微小变化导致催化产物构型的改变。     

20-O-acylcamptothecin derivatives: evidence for lactone stabilization

Convincing UV and NMR spectrophotometric evidence is presented which demonstrates that at physiological pH, 7.4, 20-O-acyl derivatives of camptothecin (CPT) are substantially more stable in the lactone form than the 20-OH parent. Additionally, it was determined by HPLC analysis that the lactone ring of a 20-O-ether derivative of CPT underwent endocyclic ring opening at pH > or =8.5, while the lactone ring of 20-O-acyl CPT derivatives remained unaffected. PEG (and other smaller alkyl) 20-O-acyl-CPT derivatives released native CPT at pH > 9.5, which arises from exocyclic cleavage, thus precluding isolation of any open CPT acyl PEG (or alkyl) carboxylate forms.     

Derivatization of prostaglandins and related compounds to (methoxime) alkyl ester alkyl ether derivatives for gas chromatographic analysis

Rapid and convenient methods are described for the exhaustive derivatization of carbonyl, carboxyl and hydroxyl groups of prostaglandins and related compounds to methoxime, alkyl ester and alkyl ether compounds respectively. Optimal reaction conditions were established for each group. The reactions were carried out in polar aprotic solvents. Alkyl ester alkyl ether derivatives were obtained quantitatively and rapidly in one step with n-alkyl (C1-C4) halides in the presence of sodium hydroxide. Methyl ester methyl ether derivatives have the highest volatility, but propyl ester propyl ether derivatives improved the separation of complex mixtures. The carbonyl group sometimes induced side-products, so the carbonyl group was converted into methoxime. Methoximation was achieved quantitatively by using methoxylamine in the presence of hydrochloric acid or sodium hydroxide, followed by alkylation in same reaction medium. Methoximation gave syn- and anti-isomers, which were separated chromatographically, decreasing the resolution for complex samples.     

Synthesis of new bis-BINOL-2,2′-ethers and bis-H8BINOL-2,2′-ethers evaluation of their Titanium complexes in the asymmetric ethylation of benzaldehyde

The preparation by means of different synthetic paths of a series of bis-BINOL and bis-H₈BINOL ligands is described. The ligands consist of two BINOL or H₈BINOL fragments, joined by diverse linkages through the oxygen at the 2′-position of the arylic fragments. These ligands were applied to the Ti(OⁱPr)₄ catalyzed asymmetric alkylation of benzaldehyde with Et₂Zn. The performance of these catalysts is very sensitive to the nature of the ether linkage. The ligand with a propylene link shows better enantioselectivity (ca. 70%) than those with two or four carbon atoms joining the BINOL fragments. Furthermore, using the propylene link, but replacing (R)-BINOL by (R)-H₈BINOL, a significant improvement in the stereoselectivity of the catalysts was achieved (ca. 80% ee in (R)-1-phenylpropan-1-ol). A cooperative effect was observed between the chirality at the BINOL fragment and that of a (S,S)-4,5-bis(methylene)-2,2-dimethyl-1,3-dioxolane link, derived from tartaric acid. When this chiral link combines with two (S)-BINOL fragments, the alkylation of benzaldehyde in toluene produces 70% ee of (S)-1-phenylpropan-1-ol, while the (R)-BINOL derivative ligand with the same link, in identical conditions, yields only 40% ee of the (R)-alcohol.     

Application of ionic liquid halide nucleophilicity for the cleavage of ethers: a green protocol for the regeneration of phenols from ethers

We have used the high nucleophilicity of bromide ion in the form of the ionic liquid, 1-n-butyl-3-methylimidazolium bromide ([bmim][Br]), for the nucleophilic displacement of an alkyl group to regenerate a phenol from the corresponding aryl alkyl ether. Using 2-methoxynaphthalene (1) as a model compound, we found that the combination of ionic liquid [bmim][Br] and p-toluenesulfonic acid with warming effected demethylation in 14 h, affording the desired product 2-naphthol (2) in good yield (97%). Various other protic acids (MsOH, hydrochloric acid (35%), dilute sulfuric acid (50%)) could be used as a proton source in this demethylation reaction. Under the same conditions, cleavage of alkyl alkyl ether 2-(3-methoxypropyl)naphthalene yielded mixture of corresponding 2-(3-bromopropyl)naphthalene and 2-(3-hydroxypropyl)naphthalene. Dealkylation of various aryl alkyl ethers could also be achieved using significantly reduced (i.e., stoichiometric) amounts of concentrated hydrobromic acid (47%) in the ionic liquid. Both procedures afforded the desired products in moderate to good yield; however, cleavage of aryl alkyl cyclic ether, 2,3-dihydrobenzofuran, resulted in low yield of the desired product o-2-bromoethylphenol. The convenience of this method for ether cleavage and its effectiveness using only a moderate excess of hydrobromic acid make it attractive as a green chemical method.     

Design and synthesis of a dual linker for solid phase synthesis of oleanolic acid derivatives

A hydrophilic amino-terminated poly(ethylene glycol)-type dual linker for solid phase synthesis of oleanolic acid derivatives using trityl chloride resin was designed and synthesized for the first time. Model reactions in both liquid and solid phase were performed to show the feasibility of its selective cleavage at two different sites. The biological assay results indicated that the long and flexible alkyl ether functionality in the linker is less likely to be critical for the binding event. Following the successful solid-phase synthesis of model compounds, the potential of this dual linker in reaction monitoring and target identification is deemed worthy of further study.     

Asymmetric synthesis of alpha-amino acids based on carbon radical addition to glyoxylic oxime ether

The first asymmetric synthesis of alpha-amino acids based on diastereoselective carbon radical addition to glyoxylic imine derivatives is reported. The addition of an isopropyl radical, generated from i-PrI, Bu(3)SnH, and Et(3)B in CH(2)Cl(2) at 25 degrees C, to achiral glyoxylic oxime ether 1 proceeded regioselectively at the imino carbon atom of the oxime ether group to give an excellent yield of the C-isopropylated product 2. The competitive reaction using glyoxylic oxime ether 1 and aldoxime ether 4 showed that the reactivity of the glyoxylic oxime ether toward nucleophilic carbon radicals was enhanced by the presence of a neighboring electron-withdrawing substituent. Thus, the alkyl radical addition to glyoxylic oxime ether 1 proceeded smoothly even at -78 degrees C, in contrast to the unactivated aldoxime ether 4. A high degree of stereocontrol in the carbon radical addition to the glyoxylic oxime ether was achieved by using Oppolzer's camphorsultam as a chiral auxiliary. The stannyl radical-mediated reaction of the camphorsultam derivative 6 with an isopropyl radical at -78 degrees C afforded a 96:4 diastereomeric mixture, 7a, of the C-isopropylated product. The reductive removal of the benzyloxy group of the major diastereomer (R)-7a, by treatment with Mo(CO)(6) and the subsequent removal of the sultam auxiliary by standard hydrolysis, afforded the enantiomerically pure D-valine (R)-12 without any loss of stereochemical purity. To evaluate the new methodology, a variety of alkyl radicals were employed in the addition reaction which gave the alkylated products 7 with excellent diastereoselectivity, allowing access to a wide range of enantiomerically pure natural and unnatural alpha-amino acids. Even in the absence of Bu(3)SnH, treatment of 6 with alkyl iodide and Et(3)B at 20 degrees C gave the C-alkylated products 7 with moderate diastereoselectivities. The use of Et(2)Zn as a radical initiator, instead of Et(3)B, was also effective for the radical reaction. The enantioselective isopropyl radical addition to 1 using (R)-(+)-2, 2'-isopropylidenebis(4-phenyl-2-oxazoline) and MgBr(2) gave excellent chemical yield of the valine derivative 2 in 52% ee.     

A novel class of materials for ferroelectric liquid crystals containing siloxy chain end groups

Novel liquid crystals containing a siloxy chain as an end tail group instead of an alkyl chain were synthesized. The substitution effects were studied for ferroelectric liquid crystal materials. It was found that the temperature range for the chiral smectic C phase was reduced and shifted to lower temperature in comparison with the analogous alkyl chain derivatives. The crystallinity of the siloxy chain derivatives decreased and cholesteric phases were not observed. The influence of siloxy chains on ferroelectric liquid crystal properties, especially spontaneous polarizations and tilt angles, also greatly depended upon the mesogenic group structure. The X-ray diffraction results showed that the end tail group occupied a larger thickness in the chiral smectic C layer for the siloxy chain derivative than that for the alkyl chain derivative.     

Synthesis of new hydrophobic adsorbents based on homologous series of uncharged alkyl sulphide agarose derivatives

A homologous series of uncharged thioalkyl derivatives of agarose were prepared by a simplified synthetic route and their adsorption behaviour towards human serum proteins was evaluated and compared with that of a commercially available alkyl ether derivative of agarose. The influence of the spacer arm length on the adsorption efficiency was also investigated. The degree of substitution of the derivatives can be estimated conveniently by sulphur analysis. The four different types of thiolkyl derivatives (C6, C8, C12 and C14) investigated here behave in all respects like hydrophobic adsorbents. The coupling yield obtained is high (75% or more) and is better than that obtained by alternative synthetic routes reported so far. The adsorption capacity towards serum proteins of the various derivatives increases with increasing alkyl chain length and degree of substitution. Desorption is achieved by a progressive decrease in the polarity of the eluent and the recovery of the applied material is in the range 80-90%. The role played by the thioether as a possible modulator of the observed hydrophobic adsorption is discussed. For the group separation of serum proteins the optimum adsorbent, as regards capacity combined with ease of elution of adsorbed material, should be substituted with chains of six or eight carbon atoms and have a ligand concentration in the range 80-120 mumole g-1 dry gel.     

Study of chemoselective asymmetric hydrogenation of (1-bromo-1-alkenyl)boronic esters with iridium–PˆN complexes

In this paper we report the first chemoselective asymmetric hydrogenation of (1-bromo-1-alkenyl)boronic esters, which constitutes a new route to (α-bromoalkyl)boronic esters. The study demonstrates that excellent chemoselectivities along with full conversions can be obtained for hydrogenation of alkyl substituted derivatives with iridium–PˆN complexes. Moreover, acyclic alkyl derivatives afford (α-bromoalkyl)boronic esters in good enantioselectivities ranging from 64 to 73% ee. A cyclic alkyl derivative was obtained only in a nearly racemic form. The (1-bromo-1-alkenyl)boronic esters appear to be less reactive towards homogenous hydrogenation conditions than their chloro analogues as demonstrated by the higher catalyst loadings required to achieve full conversions for alkyl derivatives and lower conversions observed for the aryl substituted derivatives.