Sonogashira cross-coupling reactions of aryl chlorides with alkynes catalysed by a tetraphosphine-palladium catalyst

A range of aryl chlorides undergoes cross-couplings with alkynes in good yields in the presence of [PdCl(C₃H₅)]₂/cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane as catalyst. A variety of aryl chlorides such as chloroacetophenone, chlorobenzonitrile, chloronitrobenzene, chloroanisole or chlorotoluene have been used successfully. The reaction also tolerates several alkynes such as phenylacetylene, dec-1-yne, ethynylcyclohexene or alk-1-ynols. Furthermore, this catalyst can be used at low loading with some substrates.     

Efficient coupling of heteroaryl halides with arylboronic acids in the presence of a palladium-tetraphosphine catalyst

Cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane:·1/2[PdCl(C₃H₅)]₂ system catalyses the Suzuki cross-coupling of heteroaryl halides with a range of arylboronic acids with very high ratio substrate/catalyst in good yields. Substrates such as pyridines, quinolines, thiophenes, an indole, pyrimidines or a furane have been used successfully.     

Sonogashira reaction of aryl halides with propiolaldehyde diethyl acetal catalyzed by a tetraphosphine/palladium complex

All-cis-1,2,3,4-Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ efficiently catalyzes the Sonogashira reaction of propiolaldehyde diethyl acetal with a variety of aryl bromides and chlorides. A minor electronic effect of the substituents of the aryl bromide was observed. Similar reaction rates were observed in the presence of activated aryl bromides such as 4-trifluoromethylbromobenzene and deactivated aryl bromides such as bromoanisole. Turnover numbers up to 95,000 can be obtained for this reaction. Even aryl chlorides and heteroarylbromides or chlorides have been successfully alkynylated with this catalyst. Moreover, a wide variety of substituents on the aryl halide such as fluoro, trifluoromethyl, acetyl, benzoyl, formyl, nitro, dimethylamino or nitrile are tolerated.     

Tetraphosphine/palladium catalysed Suzuki cross-coupling reactions of aryl halides with alkylboronic acids

Through the use of [PdCl(C₃H₅)]₂/cis,cis,cis-1,2,3,4-tetrakis(diphenylphosphinomethyl)cyclopentane as a catalyst, a range of aryl bromides and chlorides undergoes Suzuki cross-coupling with alkylboronic acids in good yields. Several alkyl substituents such as ethyl, n-butyl, n-octyl, isobutyl or 2,2-dimethylpropyl on the alkylboronic acids have been successfully used. The functional group tolerance on the aryl halide is remarkable; substituents such as fluoro, methyl, methoxy, acetyl, formyl, benzoyl, nitro or nitrile are tolerated. Furthermore, this catalyst can be used at low loading, even for reactions of sterically hindered aryl bromides.     

Cu（OAc）2 catalyzed Sonogashira cross-coupling reaction in amines

A simple Cu(OAc)_2 catalyzed Sonogashira coupling protocol is presented.It was found that the couplings of a variety of aryl halides with terminal alkynes were conducted smoothly to afford the corresponding desired products in moderate to excellent yields,using Cu(OAc)_2 as the catalyst and Et3N as the solvent.     

Synthesis of non-symmetrical alkynylpyridines by chemoselective Sonogashira cross-coupling reactions

4-Bromo-2,3,5-trichloro-6-iodopyridine was studied as a new substrate in chemoselective Sonogashira reactions. This approach provides an efficient access to non-symmetrical mono-, di-, tri- and pentaalkynylated pyridines in good yields. Selected pentaalkynylated pyridines were studied with regard to their UV/Vis- and emission properties showing moderate to high fluorescence quantum yields.     

Copper and amine free Sonogashira cross-coupling reaction catalyzed by efficient diphosphane-palladium catalyst

The commercially available diphosphane ligand MeO-BIPHEP was first investigated in the palladium-catalyzed Sonogashira reaction in the absence of copper and amine.The coupling of various aryl bromides and aryl chlorides with phenylacetylene gave moderate to excellent yields.     

A copper- and amine-free Sonogashira coupling reaction promoted by a ferrocene-based phosphinimine-phosphine ligand at low catalyst loading

A palladium(II) complex containing a ferrocene-based phosphinimine-phosphine ligand was applied to the amine- and copper-free Sonogashira coupling of aryl iodides and aryl bromides with terminal alkynes using 1 equiv of tetrabutylammonium acetate as an activator. The corresponding disubstituted alkynes were obtained in high yields and TONs using 0.1 mol % Pd-catalyst.     

Ligand and base-free Heck reaction with heteroaryl halides

Pd(CH₃CN)₂Cl₂-catalyzed Heck reaction of different heteroaryl halides with olefins is carried out in the absence of both the ligand and base to obtain the corresponding coupling products in good yields.     

Sonogashira cross-coupling in iodo-containing 2-aryloxazolines

Aryloxazolines represents potential building blocks in the synthesis of precursors of ESIPT-active sensors. Here we describe the Sonogashira cross-coupling reaction between iodo-containing 2-aryloxazolines and terminal alkynes. The reaction occurs under mild conditions and a range of alkynes was employed leading the formation of a small library of functionalized aryloxazolines.     

Heck reactions of aryl bromides with alk-1-en-3-ol derivatives catalysed by a tetraphosphine/palladium complex

cis,cis,cis-1,2,3,4-Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ efficiently catalyses the Heck reaction of alk-1-en-3-ol with a variety of aryl bromides. In the presence of hex-1-en-3-ol or oct-1-en-3-ol, the β-arylated carbonyl compounds were selectively obtained. Linalool and 2-methylbut-3-en-2-ol led to the corresponding 1-arylalk-1-en-3-ol derivatives. Turnover numbers up to 69,000 can be obtained for this reaction. A minor electronic effect of the substituents of the aryl bromide was observed. Similar reaction rates were observed in the presence of activated aryl bromides such as bromoacetophenone and deactivated aryl bromides such as bromoanisole.     

Coupling reactions of aryl bromides with 1-alkynols catalysed by a tetraphosphine/palladium catalyst

cis,cis,cis-1,2,3,4-Tetrakis(diphenylphosphinomethyl)cyclopentane/[PdCl(C₃H₅)]₂ system catalyses efficiently the coupling reactions of aryl halides with a variety of alkynols such as propargyl alcohol, but-1-yn-4-ol, pent-1-yn-5-ol or hex-1-yn-6-ol. The catalyst can be used at low loading. Higher reaction rates were observed in the presence of but-1-yn-4-ol, pent-1-yn-5-ol or hex-1-yn-6-ol than with propargyl alcohol. The protection of the alcohol functions as an ether or a silyloxy group led generally to similar or better results than the reactions performed with the unprotected alcohols.     

Vinyl nosylates as partner in copper and silver co-catalyzed Sonogashira cross-coupling reactions

Vinyl nosylates, readily obtained from β-dicarbonyl derivatives, could be efficiently engaged in Sonogashira cross-coupling reactions, either cocatalyzed by copper or silver salts. The para-nitrobenzenesulfonate (nosylate) group allows this coupling to be performed under very mild conditions (room temperature). These new leaving group and mild conditions could be applied to the synthesis of acetylenic coumarinyl derivatives and to the total synthesis of an acetylenic monoterpene natural product, named cleviolide.     

Facile synthesis of palladium nanoclusters and their catalytic activity in Sonogashira coupling reactions

This work reports a facile synthesis of palladium nanoclusters (PdNCs) in MeCN/MeOH mixture without any stabilizer. The PdNCs were found to be effective catalysts for copper-free, amine-free and ligand-free Songashira coupling reactions under ambient conditions.     

Sonogashira cross-coupling reactions catalysed by heterogeneous copper-free Pd-zeolites

A heterogeneous [Pd(NH₃)₄]-NaY catalyst was applied to the copper-free Sonogashira cross-coupling of aryl halides with terminal alkynes. This copper-free heterogeneous Pd-catalyst is efficient, stable and recyclable. Aryl iodides and activated aryl bromides were converted quantitatively using 1 mol % Pd-catalyst to the corresponding diaryl-substituted alkynes within 3 h.     

Choline chloride/CuCl as an effective homogeneous catalyst for palladium-free Sonogashira cross-coupling reactions

Choline chloride–CuCl (ChCl–CuCl) has been employed as an efficient catalytic system in the palladium-free Sonogashira-type cross-coupling reactions of phenylacetylene with a variety of aryl halides. Choline chloride, as an effective ligand and a quaternary ammonium salt, demonstrated an efficient stabilizing effect on the Cu(I) species during the reaction. This homogeneous catalytic system is attractive in view of its ease of application and low cost.     

Halogenated-2-pyrones in Sonogashira cross-coupling: limitations, optimisation and consequences for GC analysis of Pd-mediated reactions

The Sonogashira couplings of 4-bromo-6-methyl-2-pyrone (5) with phenylacetylene, mediated by Pd(PPh₃)₂Cl₂ in the presence of a CuI co-catalyst, have been investigated in detail. The concentration of Pd dramatically influences the product yield, with lower Pd-loadings favouring higher conversions and purer cross-coupled product. A post reaction time-dependence in product conversion is seen in samples quenched solely on silica-gel (eluted with CH₂Cl₂). The effect is mirrored in reactions employing 4-nitro-bromobenzene (14) and to a lesser extent (E) and (Z)-ethyl 3-iodo-2-propenonate (16) under similar conditions. A more efficient quenching system (using excess dppe) has been developed to enable accurate determinations in product conversions. Alternatively, solvent and base (Et₃N) removal in vacuo, or quench with saturated aqueous ammonium chloride, prevents further turnover in Sonogashira coupling. An ESI-MS study on samples eluted through silica was undertaken to probe the nature of the soluble Pd/Cu species. The Sonogashira cross-coupling of 4-chloro- and 6-chloro-2-pyrone (18 and 20, respectively) has further been investigated. The former undergoes successful coupling, however the latter decomposes in polar aprotic and protic solvents under standard conditions, through a chlorine substitution process, making Pd-mediated reactions problematic.     

Direct arylation of oxazole and benzoxazole with aryl or heteroaryl halides using a palladium-diphosphine catalyst

Through the use of PdCl(dppb)(C₃H₅) as a catalyst, a range of aryl bromides and chlorides undergoes coupling via C-H bond activation/functionalization reaction with oxazole or benzoxazole in good yields. This air-stable catalyst can be used at low loadings with several substrates. Surprisingly, better results in terms of substrate/catalyst ratio were obtained in several cases using electron-excessive aryl bromides than with the electron-deficient ones. This seems to be mainly due to the relatively low thermal stability of some of the 2-arylbenzoxazoles formed with electron-deficient aryl halides. With these substrates, in order to obtain higher yields of product, the reactions had to be performed at a lower temperature (100-120 °C) using a larger amount of catalyst. On the other hand, in the presence of the most stable products, the reactions were performed at 150 °C using as little as 0.2 mol% catalyst. Arylation of benzoxazole with heteroaryl bromides also gave the coupling products in moderate to high yields using 0.2-5 mol% catalyst. With this catalyst, electron-deficient aryl chloride such as 4-chlorobenzonitrile, 4-chloroacetophenone or 2-chloronitrobenzene have also been used successfully.     

Palladium catalyzed alkynylation of aryl halides (Sonogashira reaction) in water

The palladium catalyzed alkynylation of aryl halides (Sonogashira reaction) has been achieved in pure water without any additives or phase transfer catalysts. The reaction, which requires only 0.5 mol % of Pd(PPh₃)₄ catalyst, is remarkably fast (30 min at 70 °C) producing high yields of the aryl alkyne products.     

Important consequences for gas chromatographic analysis of the Sonogashira cross-coupling reaction

On following the kinetics of the Sonogashira alkynylation reaction of halogenated 2-pyrone 1 with phenylacetylene we have found that turnover continues to occur in sample vials even after quenching by commonly employed silica adsorption methods and product elution with small quantities of CH₂Cl₂. Trace quantities of Pd are carried through the silica plug. Addition of a CH₂Cl₂ solution of 1,2-bis(diphenylphosphino)ethane (dppe) to the quenched sample inhibits the reaction and represents a more reliable method for determining yields and reaction kinetics.