CMPO-substituted calix[6]- and calix[8]arene extractants for the separation of An/Ln from radioactive waste

Three calix[6]arene derivatives (1a-c) and two calix[8]arene derivatives (2a,b), with six and eight CMPO residues, respectively, attached to the narrow/lower rim via ether links, were synthesised. Preliminary liquid-liquid extraction studies for Eu(III) and Am(III) from aqueous nitric acid to o-nitrophenylhexyl ether reveal remarkable properties with respect to efficiency and selectivity, especially for the tert-butylcalix[6]arene derivative with a -(CH₂)₃- spacer.     

Synthesis of novel p-tert-butyl-calix[4]arene derivatives and their cation binding ability: chromogenic effect upon side arms binding

A series of novel double-armed calix[4]arene derivatives, i.e. 5,11,17,23-tetra-tert-butyl -25,27-bis[2-[(2-hydroxy-5-(4-nitroazo)benzylidene)amino]ethoxy]-26,28-dihydroxy-calix[4]-arene (4), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(2-nitroazo)benzylidene) amino]ethoxy]-26,28-dihydroxycalix[4]arene (5), 5,11,17,23-tetra-tert-butyl-25,27-bis[2-[(2-hydroxy-5-(4-chloroazo)benzylidene)amino]ethoxy]-26,28-dihydroxycalix[4]arene (6), have been synthesized as an selective chromoionophore for Na⁺. The complexation behavior of ligands 4-6 with alkali metal ions Na⁺, K⁺, Rb⁺and Cs⁺ has been evaluated by using UV-Vis spectrometry in CH₃CN-H₂O (99:1/V:V) solution at 25°C. The UV-Vis spectra show that the complexation of 4-6 with Na⁺exhibits obvious bathochromic shifts (λ_max 379→480 nm) and there is a unique color change in the solution from yellow to red upon complexation. The binding constants for Na⁺ are higher than that of other alkali metal ions, giving the highest cation selectivity up to 7 for Na⁺/K⁺. The binding ability and photophysical behavior of alkali cations by calix[4]arene derivatives 4-6 are discussed from the point of view of substituted effects at the lower rim of parent calix[4]arene and size-fit concept between host calix[4]arenes and guest cations.     

Calix[4]quinones. Part 4: The ClO2 oxidation of calix[4]arene dialkyl ethers

Except for the special case of calix[4]arene diethyl ether 1, the chlorine dioxide oxidation of dialkyl ethers 2-5 yielded only the corresponding calix[4]diquinone dialkyl ethers 8-11. Chlorine dioxide oxidation of calix[4]arene diethyl ether 1 produced two isomeric products 6 and 7, which were stable enough to be isolated by column chromatography. However, a slow conformational interconversion between isomeric pair 6 and 7 was observed at room temperature, and the equilibrium was reached after 400 h at 18 °C with an amount of 5:3 in favor of syn-isomer.     

Diester intrabridging of p-tert-butylcalix[8]arene and unexpected formation of the monospirodienone derivative

Reaction of p-tert-butylcalix[8]arene 1 with adipoyl chloride in the presence of NaH as the base yielded singly and doubly intrabridged esters 2-4 and 6. Surprisingly, calix[8]arene monospirodienone derivative 7 was also isolated, which was originated by O₂ oxidation. The conditions of this oxidation were optimized leading to a novel synthetic approach to calixarene monospirodienones based on the O₂/NaH/acyl-chloride oxidizing system. Xantheno calix[8]arenes 8-8a were obtained by rearrangement of 7.     

Synthesis of di-substituted calix[4]arene-based receptors for extraction of chromate and arsenate anions

The article describes the synthesis of a family of novel calix[4]arene ionophores, 25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5a), 25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5b) and two chromogenic calix[4]arenes, 5,17-dinitro-25,27-bis-(2-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5c), 5,17-dinitro-25,27-bis-(3-aminomethylpyridine-propoxy)-26,28-dihydroxycalix[4]arene (5d) bearing pyridinium units. In the synthesis, the upper and lower rims of p-tert-butylcalix[4]arene were modified in order to acquire binding sites for the recognition of arsenate and dichromate anions. It has been observed that protonated alkylammonium forms of the ionophores showed high affinity toward dichromate and arsenate anions.     

Synthesis, characterization and electrochemical properties of two new calix[4]arene derivatives bearing two ferrocene imine or ferrocene amine units at the upper rim

A novel calix[4]arene derivative with two ferrocenyl Schiff-base groups at the upper rim 3 has been synthesized from 5,17-diformyl-25,27-dipropoxy-26,28-dihydroxy calix[4]arene and 4-ferrocenylaniline via condensation reaction. Reduction of 3 with sodium borohydride led to calix[4]arene derivative 4 with two amino ferrocenyl groups at the upper rim. The ferrocenyl Schiff-base calix[4]arene and its corresponding reduced amine have been purified and characterized by elemental analysis,¹H NMR, FTIR, Mass and UV-vis spectral data. Electrochemical properties of compounds 3 and 4 have been investigated. Cyclic voltammograms of 3 and 4 show reversible redox couples of ferrocene/ferrocinium at E_1/2=0.401 V and 0.346 V, respectively. Electrochemical studies show these redox active compounds electrochemically recognize trivalent lanthanides La³⁺ and Ce³⁺ and divalent Pb²⁺ and Cu²⁺cations. With ferrocenyl Schiff-base calix[4]arene 3 an anodic shift as large as 130 mV is observed on addition of one equivalent of Ce³⁺ ion. Also extraction properties of compound 4 towards some metal cations have been described. It has been observed that compound 4 has a good selectivity for metal cations Fe³⁺, Cu²⁺, Pb²⁺ and Cd²⁺ against Ni²⁺ and Co²⁺.     

Calixarene amino acids; building blocks for calixarene peptides and peptide-dendrimers

A modular strategy towards receptor macromolecules is presented, which combines synthetically diverse peptide synthesis with highly functional calixarene chemistry. The design and synthesis of calix[4]arene amino acids 1a-f, calix-lysines, is described, which were used as construction blocks to assemble nanoscale, multivalent entities—calix-peptides 2 and calix-peptide-dendrimers 3.     

Phosphite ligands derived from distally and proximally substituted dipropyloxy calix[4]arenes and their palladium complexes: Solution dynamics, solid-state structures and catalysis

Two bisphosphite ligands, 25,27-bis-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (3) and 25,26-bis-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy-p-tert-butyl calix[4]arene (4) and two monophosphite ligands, 25-hydroxy-27-(2,2′-biphenyldioxyphosphinoxy)-26,28-dipropyloxy-p-tert-butyl calix[4]arene (5) and 25-hydroxy-26-(2,2′-biphenyldioxyphosphinoxy)-27,28-dipropyloxy- p-tert-butyl calix[4]arene (6) have been synthesized. Treatment of (allyl) palladium precursors [(η³-1,3-R,R′-C₃H₄)Pd(Cl)]₂ with ligand 3 in the presence of NH₄PF₆ gives a series of cationic allyl palladium complexes (3a-3d). Neutral allyl complexes (3e-3g) are obtained by the treatment of the allyl palladium precursors with ligand 3 in the absence of NH₄PF₆. The cationic allyl complexes [(η³-C₃H₅)Pd(4)]PF₆ (4a) and [(η³-Ph₂C₃H₃)Pd(4)]PF₆ (4b) have been synthesized from the proximally (1,2-) substituted bisphosphite ligand 4. Treatment of ligand 4 with [Pd(COD)Cl₂] gives the palladium dichloride complex, [PdCl₂(4)] (4c). The solid-state structures of [{(η³-1-CH₃-C₃H₄)Pd(Cl)}₂(3)] (3f) and [PdCl₂(4)] (4c) have been determined by X-ray crystallography; the calixarene framework in 3f adopts the pinched cone conformation whereas in 4c, the conformation is in between that of cone and pinched cone. Solution dynamics of 3f has been studied in detail with the help of two-dimensional NMR spectroscopy.The solid-state structures of the monophosphite ligands 5 and 6 have also been determined; the calix[4]arene framework in both molecules adopts the cone conformation. Reaction of the monophosphite ligands (5, 6) with (allyl) palladium precursors, in the absence of NH₄PF₆, yield a series of neutral allyl palladium complexes (5a-5c; 6a-6d). Allyl palladium complexes of proximally substituted ligand 6 showed two diastereomers in solution owing to the inherently chiral calix[4]arene framework. Ligands 3, 6 and the allyl palladium complex 3f have been tested for catalytic activity in allylic alkylation reactions.     

Synthesis and self-assembly of novel calix[4]arenocrowns: formation of calix[4]areno[2]catenanes

A series of novel calix[4]arenocrowns 1a-c were efficiently synthesized by a one-pot reaction of calix[4]monohydroquinone diacetate 5 with ditosylate 6 and its analogues in the presence of sodium hydroxide. It was found that the calix[4]arenocrowns could form stable pseudorotaxane-type complexes 2a-c with paraquat, and further self-assemble into calix[4]areno[2]catenanes 3a-c with dicationic salt 8 and p-bis(bromomethyl)benzene.     

Syntheses of two diamine substituted 1,3-distal calix[4]arene-based magnetite nanoparticles for extraction of dichromate, arsenate and uranyl ions

The synthesis of two new calixarene derivatives 4 and 5, functionalized at the lower rim with 4-amino-1-benzylpiperidine to give diamide and diamine derivatives of p-tert-butylcalix[4]arene, is described. They were obtained by the reaction of both the diester derivative of p-tert-butylcalix[4]arene (2) and the dialkyl bromide derivative of p-tert-butylcalix[4]arene (3) with 4-amino-1-benzylpiperidine. The ¹H NMR spectra of calixarene derivatives show that 4 and 5 exist in the cone conformation. Moreover, these diamide and diamine derivatives of p-tert-butylcalix[4]arene (4 and 5) have been immobilized onto [3-(2,3-epoxypropoxy)-propyl]-trimethoxysilane-modified Fe₃O₄ magnetite nanoparticles to obtain calixarene-based magnetic nanoparticles M-DADBP-Calix (6) and M-DABP-Calix (7). The calix[4]arene immobilized materials were characterized by a combination of Fourier Transform Infrared Spectroscopy (FTIR), Transmission Electron Microscopy (TEM) and Thermogravimetric Analyses (TGA) and elemental analysis. Additionally, the studies regarding the removal of As(V)/Cr(VI) ions as well as U(VI) ion from aqueous solutions were also carried out by using these compounds in liquid-liquid/solid-liquid extraction experiments.     

Upper rim tetrathiafulvalene-bridged calix[4]arenes

The synthesis of novel upper rim calix[4]arene-tetrathiafulvalene conjugates 1a-d has been performed by bridging the tetrachloromethylated calix[4]arene derivative 4 with the corresponding tetrathiafulvalene-dithiolates. The cyclic voltammetry of 1a-d shows a two-step oxidation behavior, whereas NMR binding titrations showed their binding affinity to pyridinium salts. X-ray structure of 4 features calixarene fixed in the pinched cone conformation; its crystal packing is defined by the network of C-H···Cl weak hydrogen bonds.     

Water-soluble pentasulfonatocalix[5]arene: selective recognition of ditopic trimethylammonium cations by a triple non-covalent interaction

The inclusion of tetramethylammonium and ditopic trimethylammonium cations by the water-soluble pentasulfonatocalix[5]arene 1 has been studied at neutral pH by ¹H NMR and compared with the homologous tetrasulfonatocalix[4]arene 2. Unlike host 2, host 1 selectively binds the ditopic trimethylammonium ions by three different non-covalent interactions. Remarkably the flexible host 1 exhibits both more efficiency and selectivity in the complexation of ditopic methylammonium ions with respect to similar more preorganised calix[4]arene receptors.     

Functionalisation of the upper rim of calix[4]arene via alcoholysis and hydrosilylation reactions

Metalation of 5,17-dibromo-25,26,27,28-tetra propoxy calix[4]arene (1) with n-BuLi in THF at −78 °C gave organolithium reagent, which reacted with Me₂HSiCl to give 5,17-bis(dimethylsilyl)-25,26,27,28-tetra propoxy calix[4]arene (2). The Si-H groups of calixarene 2 were treated with methanol, ethanol, propanol, butanol, pentanol, hexanol, 2-propanol and 2-methyl propanol in the presence of Karstedt catalyst (platinum(0)-1,3-divinyl-1,1,3,3-tetramethyl disiloxane complex, solution in xylene) to give the corresponding 5,17-bis(alkoxydimethylsilyl)-25,26,27,28-tetra propoxy calix[4]arene (3). Moreover, calixarene 2 was easily functionalized with a variety of alkenes using Karstedt catalyst to give the corresponding organosilylated calix[4]arene (4).     

Calix[4]azacrowns as ionophores for liquid?Cliquid extraction and facilitated transport of biological supramolecular complexes

The native and methyl ester amino acids have been extracted by calix[4]azacrowns 1 (1,3-[ethylene-bis-aminocarbonylmethoxy)]-p-tert-butylcalix[4]arene) and 2 (1,3-[propylene-bis-aminocarbonylmethoxy)]-p-tert-butyl-calix[4]arene) from an aqueous phase into a chloroform phase and transported through a chloroform liquid membrane as ion pairs in the presence of picrate or tropaeolin 00 as counter ions aiming their separation. The amino acids under study exhibited good extractability by calix[4]azacrowns 1 and 2. Both receptors 1 and 2 showed good extractability towards amino acids under study. The results are discussed in term of correlation of structural properties of amino acids and calix[4]azacrowns involved in experiments. In this respect, the influence of chain length of receptors upon extraction and transport of amino acids, and the nature of anions used as counter ions are evaluated.     

Regioselective double intramolecular bridging of p-tert-butylcalix[7]arene

The first examples of doubly bridged calix[7]arenes 2a-h have been obtained by base-promoted O-alkylation of p-tert-butylcalix[7]arene 1 or 1,4-tetramethylene-bridged calix[7]arene 3a with a variety of bis-electrophiles including BrCH₂Cl, oligoethylene glycol ditosylates, and 1,2-bis(bromomethyl)benzene. In the presence of Cs₂CO₃ as the base, in acetone, the syn-1,4:2,3-bis-bridged regioisomer was obtained in yields up to 76%. Assignment of bridging pattern was based on chemical shift of OH groups in conjunction with chemical correlations with known compounds. Stereochemical and conformational features were investigated with the aid of 2D and Dynamic NMR studies and MM3 calculations.     

Synthesis of novel calix[4]arenes containing organosilicon groups

Metalation of (RSiMe₂)₃CH (1a R = H, 1b R = Me, 1c R = Ph) with lithium diisopropylamide (LDA) or methyllithium in THF gave organolithium reagents (RSiMe₂)₃CLi, which reacted with the formylated calixarene (2), to give the corresponding 5,17-bis[2,2-bis(organosilyl)-1-ethenyl]-25,26,27,28-tetrapropoxycalix[4]arenes (3a, 3b and 3c) via the Peterson olefination. The compounds (RSiMe₂)₃CLi were treated with 25,26,27,28-tetrakis(4-bromobutoxy)calix[4]arene (4) to give 25,26,27,28-tetrakis[4-(tris(dimethylsilyl)methyl)butoxy] calix[4]arene (5a) and 25,26,27,28-tetrakis[4-(tris(trimethylsilyl)methyl)butoxy] calix[4]arene (5b) via nucleophilic substitution reactions. However the compound 25,26,27,28-tetrakis[4-(tris(dimethylphenylsilyl)methyl)butoxy] calix[4]arene (5c) was not obtained, presumably because (PhSiMe₂)₃C- is highly sterically hindered and the reactivity of its derivatives is low. The compound 5a has potential as a core for dendrimers.     

Multiple catenanes based on tetraloop derivatives of calix[4]arenes

Four novel tetraarylurea calix[4]arenes (4a-d) have been synthesized, substituted by ω-alkenyloxy residues in 3,5-positions of the arylurea residues. The eight alkenyl groups were pairwise connected by olefin metathesis and subsequent hydrogenation. The ring-closure reaction was carried out with heterodimers exclusively formed by 4 with a tetratosylurea calix[4]arene 1, which serves as a template in this reaction step. The potential trans-cavity bridging is entirely suppressed in this way. Bis- and tetraloop calix[4]arenes cannot form dimers due to overlapping loops. However, they readily form heterodimers with open-chain tetraureas, as long as their urea residues can pass through the loops. Thus, five heterodimeric capsules 8a-e with bis[3]catenane structure were synthesized using again the olefin metathesis followed by hydrogenation. Two different strategies were compared for this reaction sequence, starting with heterodimers formed either by tetraloop derivatives 5 with tetraalkenyl tetraureas 6 (pathway A) or by bisloop derivatives 7 with octaalkenyl tetraureas 4 (pathway B). A distinct advantage of one of these pathways was not observed; the bis[3]catenanes were obtained with yields of 20-60%. Heterodimers formed by tetraloop derivatives 5b-d and octaalkenyl ureas 4b-d were converted analogous to three novel cyclic [8]catenanes 9a-c in 30-42% yield. The structure of the novel catenanes was unambiguously proved by ¹H NMR and ESI MS, and for 8a and 9a additionally by single crystal X-ray analysis.     

Capping the upper and lower rims of calix[4]arenes by aryl dinitrile oxide reactions

1,3-Dipolar cycloadditions of upper- and lower-rim diallylcalix[4]arenes (1 and 3) with aryl dinitrile oxides provide a unique and efficient way of capping the calix[4]arenes. When dinitrile oxides reacted with 5-allylcalix[4]arene 7, they underwent a 1,3-dipolar cycloaddition on one side and an electrophilic substitution on the other side, which led to a novel type of asymmetric calix[4]arenes (9 and 12).     

New receptors for anions in water: Synthesis, characterization, X-ray structures of new derivatives of 5,11,17,23-tetraamino-25,26,27,28-tetrapropyloxycalix[4]arene

Syntheses and characterization of ten new compounds from the calixarene family, cone - 5,11,17,23- tetrakis(2-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4a; cone - 5,11,17,23-tetrakis(3-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4b; cone - 5,11,17,23-tetrakis(4-pyridylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4c; cone - 5,11,17,23-tetrakis(ferrocenylmethylamino)-25,26,27,28-tetrapropyloxycalix[4]arene 4d; cone - 5,11,17,23-tetrakis(2-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3a; cone - 5,11,17,23-tetrakis(3-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3b; cone - 5,11,17,23-tetrakis(4-pyridylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3c; cone - 5,11,17,23-tetrakis(ferrocenylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3d; cone - 5,11,17,23-tetrakis(2-thienylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3e and cone - 5,11,17,23-tetrakis(2-pyrrolylmethimino)-25,26,27,28-tetrapropyloxycalix[4]arene 3f are reported. The target compounds 4a-4d were designed to form complexes with anions based on hydrogen bonds and electrostatic interactions in acidic aqueous solutions and the interaction constant 1770 mol⁻¹ dm³ of a 1:1 complex was obtained for the interaction of 4c with sulfate anion in 5 × 10⁻³ M aqueous HCl. The solid state structures of the compounds 3b, 3e and 3f were determined, their stereochemistry and the stereochemistry of the calix[4]arene frame is generally discussed. Raman, infrared and UV-vis spectra of the target compounds and some intermediates are reported, too.     

Synthesis of new calix[4]arenes containing nucleoside bases

A family of novel calix[4]arene derivatives containing nucleoside bases were designed and synthesized. Coupling reaction between para mono- or bis-amino calix[4]arenes 5, 6 or 7 and thymin-1-ylacetic acid in the presence of DCC afforded mono- or bis-thymine-substituted calix[4]arenes 8, 9 or 10 in over 70% yield. Owing to the low solubility of adenine-N⁹-ylacetic acid in DMF and DMSO and the weak nucleophilicity of aminocalix[4]arene derivatives, alternatively, the substitution reaction of bromoacetylated aminocalix[4]arenes derivatives 11, 12, 13 with adenine in the presence of sodium hydride was carried out to synthesize mono- or bis-adenine-substituted calix[4]arenes. Two kinds of isomers 15 and 16 or 17 and 18 were obtained due to the non-regiospecific alkylation of adenine, and their structures have been confirmed by ¹³C NMR and ¹H NMR spectra.