Pd-catalyzed selective tandem arylation-alkylation of 1,1-dihalo-1-alkenes with aryl- and alkylzinc derivatives to produce α-alkyl-substituted styrene derivatives

Trans-selective monoarylation of 1,1-dibromo- and 1,1-dichloro-1-alkenes (1) can be achieved in >80% yields and in ≥98-99% stereoselectivity with arylzinc bromides in the presence of a catalytic amount of Cl₂Pd(DPEphos) or Cl₂Pd(dppb), the former permitting cleaner and higher yielding reactions. Although THF is a generally satisfactory solvent, ether and toluene are superior to THF in some cases. The second substitution of (Z)-α-bromostyrenes (3) with alkylzincs in the presence of 2 mol% of Pd(^tBu₃P)₂ proceeds to give the corresponding 2 in >90% yields and in ≥98-99% stereoselectivity. Although somewhat less satisfactory, the use of Cl₂Pd(DPEphos) permits a one-pot tandem arylation-alkylation.     

Palladium-catalyzed trans-selective alkynylation-alkylation tandem process for the synthesis of (E)-3-alkyl-1-trialkylsilyl-3-alken-1-ynes

The Pd-catalyzed trans-selective monoalkynylation of 1,1-dihalo-1-alkenes with XZnCCSiMe₃, where X is Br or Cl, can proceed generally in excellent yields in the presence of Pd(DPEphos)Cl₂ or Pd(dppf)Cl₂, and subsequent alkylation with methyl- and ethylzincs can proceed in excellent yields with ≥98% retention of configuration in the presence of Pd(^tBu₃P)₂ as a catalyst.     

Preparation,NMR studies and crystal structure of mononuclear and dinuclear Pd(II) and Pt(II) complexes that contain 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene

The reaction between 1,2-bis[3-(3,5-dimethyl-1-pyrazolyl)-2-thiapropyl]benzene (bddf) and [MCl₂(CH₃CN)₂] (M = Pd(II), Pt(II)) in a 1:1 M/L ratio in CH₂Cl₂ or acetonitrile solution, respectively, gave the complexes trans-[MCl₂(bddf)] (M = Pd(II) (1), Pt(II) (4)), and in a 2:1 M/L ratio led to [M₂Cl₄(bddf)] (M = Pd(II) (2), Pt(II) (5)). Treatment of 1 and 4 with AgBF₄ and NaBPh₄, respectively, gave the compounds [Pd(bddf)](BF₄)₂ (3) and [Pt(bddf)](BPh₄)₂ (6). When complexes 3 and 6 were heated under reflux in a solution of Et₄NBr in CH₂Cl₂/CH₃OH (1:1) for 24 h, analogous complexes to 1 and 4 with bromides instead of chlorides bonded to the metallic centre were obtained. These complexes were characterised by elemental analyses, conductivity measurements, infrared, ¹H, ¹H{¹⁹⁵Pt}, ¹³C{¹H}, ¹⁹⁵Pt{¹H} NMR, HSQC and NOESY spectroscopies. The X-ray crystal structure of the complex [Pd(bddf)](BF₄)₂ · H₂O has been determined. The metal atom is tetracoordinated by the two azine nitrogen atoms of the pyrazole rings and two thioether groups.     

Synthesis and crystal structure of four Pd(II) complexes containing nido or closo carborane diphosphine ligands

Three Pd(II) complexes [Pd₂(μ-Cl)₂{7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}₂] · 0.25CH₂Cl₂ (1), [Pd{7,8-(PPh₂)₂-7,8-C₂B₉H₁₀}₂] · 4CHCl₃ (2) and [PdCl₂(1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀)] (3) have been synthesized by the reactions of 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ with PdCl₂ in acetonitrile, cyanophenyl and dichloromethane, respectively. A fourth complex, [PdI₂(1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀)] (4), was obtained by a ligand exchange reaction through the substitution of the Cl⁻ of complex 3 with I⁻. All four complexes have been characterized by elemental analysis, FT-IR, ¹H and ¹³C NMR spectroscopy and X-ray structure determination. Single crystal X-ray determination showed that the carborane cage, nido for 1, 2 and closo for 3, 4, was coordinated bidentately to the Pd atom through the two P atoms, and the geometry at the Pd atom was square-planar in all the complexes.     

Mechanistic studies on the Pd–Cl cleavage of dichloro-[1-alkyl-2-(naphthylazo)imidazole]palladium(II) complexes by 8-quinolinol

8-Quinolinol (HQ) reacts with [Pd(α-/β-NaiR)Cl₂] [α-/β-NaiR = 1-alkyl-2-(naphthyl-α-/β-azo)imidazole] in acetonitrile (MeCN) solution to give [Pd(α-/β-NaiR)(Q)](ClO₄). The products are characterized by spectroscopic techniques (FT-IR, UV–Vis, NMR). The reaction kinetics show a first order dependence of rate on each of the concentration of the metal complex and HQ. Addition of LiCl to the reaction retarded the rate of reaction and has proved the cleavage of the Pd–Cl bond as the rate-determining step. Thermodynamic parameters (Δ^‡H^° and Δ^‡S^°) are determined from variable temperature kinetic studies. The magnitude of the second order rate constant, k₂, increases as in the order: Pd(NaiEt)Cl₂ < Pd(NaiMe)Cl₂ < Pd(NaiBz)Cl₂ as well as Pd(β-NaiR)Cl₂ < Pd(α-NaiR)Cl₂.     

Pd–Cl cleavage of dichloro-[1-alkyl-2-(naphthylazo)imidazole]palladium(II) complexes by picolinic acid: Kinetic and mechanistic studies

Picolinic acid (picH) reacts with [Pd(α-/β-NaiR)Cl₂] [α-/β-NaiR = 1-alkyl-2-(naphthyl-α-/β-azo)imidazole] in acetonitrile (MeCN) medium to give [Pd(α-/β-NaiR)(pic)](ClO₄). The products are characterized by spectroscopic techniques (FT-IR, UV–Vis, NMR). The reaction kinetics show first order dependence of rate on each of the concentration of Pd(II) complex and picH. Addition of LiCl to the reaction decreases the rate of reaction and has proved the cleavage of Pd–Cl bond at the rate-determining step. Thermodynamic parameters (Δ^‡H° and Δ^‡S°) are determined from variable temperature kinetic studies. The magnitude of the second order rate constant, k₂ increases as in the order: Pd(NaiEt)Cl₂ < Pd(NaiMe)Cl₂ <  Pd(NaiBz)Cl₂ as well as Pd(β-NaiR)Cl₂ <  Pd(α-NaiR)Cl₂.     

Coordination compounds of N,N′-olefin functionalized imidazolin-2-ylidenes

N-Heterocyclic carbene ligands (NHC) were metalated with Pd(OAc)₂ or [Ni(CH₃CN)₆](BF₄)₂ by in situ deprotonation of imidazolium salts to give the N-olefin functionalized biscarbene complexes [MX₂(NHC)₂] 3-7 (3: M = Pd, X = Br, NHC = 1,3-di(3-butenyl)imidazolin-2-ylidene; 4: M = Pd, X = Br, NHC = 1,3-di(4-pentenyl)imidazolin-2-ylidene; 5: M = Pd, X = I, NHC = 1,3-diallylimidazolin-2-ylidene; 6: M = Ni, X = I, NHC = 1,3-diallylimidazolin-2-ylidene; 7: M = Ni, X = I, NHC = 1-methyl-3-allylimidazolin-2-ylidene). Molecular structure determinations for 4-7 revealed that square-planar complexes with cis (5) or trans (4, 6, 7) coordination geometry at the metal center had been obtained. Reaction of nickelocene with imidazolium bromides afforded the η⁵-cyclopentadienyl (η⁵-Cp) monocarbene nickel complexes [NiBr(η⁵-Cp)(NHC)] 8 and 9 (8: NHC = 1-methyl-3-allylimidazolin-2-ylidene; 9: NHC = 1,3-diallylimidazolin-2-ylidene). The bromine abstraction in complexes 8 and 9 with silver tetrafluoroborate gave complexes [NiBr(η⁵-Cp)(η³-NHC)] 10 and 11. The X-ray structure analysis of 10 and 11 showed a trigonal-pyramidal coordination geometry at the nickel(II) center and coordination of one N-allyl substituent.     

Syntheses of a 2,6-bis-(methylphospholyl)pyridine ligand and its cationic Pd(II) and Ni(II) complexes - application in the palladium-catalyzed synthesis of arylboronic esters

2,6-Bis(2,5-diphenylphospholyl-1-methyl)pyridine (2) was prepared from the reaction of 2,5-diphenylphospholide anion with 2,6-bis(chloromethyl)pyridine. The X-ray crystal structure of 2 was recorded. Reaction of 2 with [Pd(COD)Cl₂] in the presence of AgBF₄ yields the cationic complex [Pd(2)Cl][BF₄] (3). The analogous Ni complex [Ni(2)Br][BF₄] (4) was prepared in a similar way by reacting ligand 2 with [NiBr₂(DME)] in the presence of AgBF₄ and its formulation was confirmed by an X-ray crystal structure study. Complex 3 efficiently catalyzes the coupling between pinacolborane and iodo and bromoarenes with good TON (up to 1 × 10⁵ with iodo derivatives and 8.9 × 10³ with bromo derivatives).     

Steric and electronic effects in stabilizing allyl-palladium complexes of “P-N-P” ligands, X2PN(Me)PX2 (X = OC6H5 or OC6H3Me2-2,6)

The chemistry of η³-allyl palladium complexes of the diphosphazane ligands, X₂PN(Me)PX₂ [X = OC₆H₅ (1) or OC₆H₃Me₂-2,6 (2)] has been investigated.The reactions of the phenoxy derivative, (PhO)₂PN(Me)P(OPh)₂ with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = H or Me; R′ = H, R″ = Me) give exclusively the palladium dimer, [Pd₂{μ-(PhO)₂PN(Me)P(OPh)₂}₂Cl₂] (3); however, the analogous reaction with [Pd(η³-1,3-R′,R″-C₃H₃)(μ-Cl)]₂ (R′ = R″ = Ph) gives the palladium dimer and the allyl palladium complex [Pd(η³-1,3-R′,R″-C₃H₃)(1)](PF₆) (R′ = R″ = Ph) (4). On the other hand, the 2,6-dimethylphenoxy substituted derivative 2 reacts with (allyl) palladium chloro dimers to give stable allyl palladium complexes, [Pd(η³-1,3-R′,R″-C₃H₃)(2)](PF₆) [R′ = R″ = H (5), Me (7) or Ph (8); R′ = H, R″ = Me (6)].Detailed NMR studies reveal that the complexes 6 and 7 exist as a mixture of isomers in solution; the relatively less favourable isomer, anti-[Pd(η³-1-Me-C₃H₄)(2)](PF₆) (6b) and syn/anti-[Pd(η³-1,3-Me₂-C₃H₃)(2)](PF₆) (7b) are present to the extent of 25% and 40%, respectively. This result can be explained on the basis of the steric congestion around the donor phosphorus atoms in 2. The structures of four complexes (4, 5, 7a and 8) have been determined by X-ray crystallography; only one isomer is observed in the solid state in each case.     

Synthesis and spectroscopic investigations of Rh(III) and Pd(II) complex compounds with N-(pyridine-2-yl)morpholine-4-carbothioamide

The present paper describes the synthesis and spectral properties of Rh(III) and Pd(II) coordination compounds with N-(pyridine-2-yl)morpholine-4-carbothioamide (PMCTA). The compounds have the general composition [RhL₂Cl₂]Cl · C₂H₅OH (1), [PdL₂]Cl₂ (2), [PdL₂](ClO₄)₂ · 2C₃H₆O (2a), [PdLCl₂] · 2H₂O (3). All complexes were characterized by elemental analysis, IR, ¹H NMR, ¹³C NMR, XPS and UV–Vis spectra. It has been shown that PMCTA behaves as a bidentate (N,S)-ligand, forming six membered metallocycles and coordinating to the metal ion through the carbothioamide sulfur atom and the pyridine nitrogen atom. The UV–Vis spectra suggest that the Pd(II) complexes are square planar, while the Rh(III) complex has an octahedral geometry. The molecular structure of the Pd(II) complex with PMCTA (M:L = 1:2) was determined by single-crystal X-ray diffraction.     

Palladium-catalyzed C–S bond formation by using N-amido imidazolium salts as ligands

N-Amido imidazolium salt was employed as a ligand in the palladium-catalyzed cross-coupling reaction of aryl halides and thiols, and showed good activity in the formation of thioether. The best combination for the coupling with aryl bromides was N-amido imidazolium salt 2 and NaHMDS, and that for the coupling with aryl iodides was N-amido imidazolium salt 1 and KO^tBu. The coupling reactions were conducted in the presence of Pd(OAc)₂ (1 mol %) in DMSO at 80 °C for 12 h.     

Reactivity of M(en)Cl2 (M = Pd/Pt,en = 1,2-diaminoethane) with N,N′-bis(salicylidene)-p-phenylenediamine: Binding with hexafluorobenzene

Schiff base N,N′-bis(salicylidene)-p-phenylenediamine (LH₂) complexed with Pt(en)Cl₂ and Pd(en)Cl₂ provided [Pt(en)L]₂ · 4PF₆ (1) and Pd(Salen) (2) (Salen = N,N′-bis(salicylidene)-ethylenediamine), respectively, which were characterized by their elemental analysis, spectroscopic data and X-ray data. A solid complex obtained by the reaction of hexafluorobenzene (hfb) with the representative complex 1 has been isolated and characterized as 3 (1 · hfb) using UV–Vis, NMR (¹H, ¹³C and ¹⁹F) data. A solid complex of hfb with a reported Zn-cyclophane 4 has also been prepared and characterized 5 (4 · hfb) for comparison with complex 3. The association of hfb with 1 and 4 has also been monitored using UV–Vis and luminescence data.     

An inexpensive and highly stable ligand 1,4-bis(2-hydroxy-3,5-di-tert-butylbenzyl)piperazine for Mizoroki-Heck and room temperature Suzuki-Miyaura cross-coupling reactions

A bulky, inexpensive and simple bidentate ligand 1,4-bis(2-hydroxy-3,5-di-tert-butylbenzyl)piperazine (1) has been synthesized and characterized. The palladium catalyst was formed by combination of 1 with [Cl₂Pd(COD)] in a ratio of 1:1, tested in the Suzuki-Miyaura and Mizoroki-Heck cross-coupling reactions. Coupling of a variety of aryl bromides with phenylboronic acid using methanol as solvent at room temperature, or at 60 °C, gave generally high yields of coupled products. Coupling of aryl chlorides with organoboron reagent at 110 °C in DMF afforded good yields of biaryls under aerobic conditions. This non-phosphorus, air and moisture stable catalyst also displays good activity for Mizoroki-Heck coupling reaction in methanol at 60 °C with various aryl chlorides and bromides.     

Preparation of 2,2-difluoro-1-trialkylsilylethenylstannanes and their cross-coupling reactions

Reaction of 2 with bis(tributyltin) in the presence of 3 mol % Pd₂(dba)₃, 6 mol % XPhos, and 30 equiv of LiBr in wet and air bubbled THF at reflux for 8 h afforded the desired products 3 in 73–74% yields. The cross-coupling reaction of 3a with aryl iodides in the presence of 10 mol % Pd(PPh₃)₄ and 10 mol % CuI afforded the coupled products 4a–p in 47–90% yields. The coupling reaction of 3b with various alkynyl bromides having aryl-, alkyl, or trialkylsilyl group also afforded the corresponding 1,3-enynes 5a–g in 61–77% yields.     

Design and synthesis of thioether-imidazolium chlorides as efficient ligands for palladium-catalyzed Suzuki-Miyaura coupling of aryl bromides with arylboronic acids

The catalyst composed of 0.25-0.025 mol % of [Pd(allyl)Cl]₂ and 0.5-0.05 mol % of the thioether-imidazolium chloride 3c was proven to be efficient in the Suzuki-Miyaura cross-coupling reactions of aryl bromides with arylboronic acids.     

Synthesis and characterization of two types of skeleton heterobimetallic trinuclear Mo(W)–Cu–S clusters containing 1,2-bis(diphenylphosphino)-1,2-dicarba-closo-dodecaborane

Reactions of (NH₄)₂MS₄ or (NH₄)MOS₃ (M = Mo, W) with CuSCN and the closo carborane diphosphine 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ in CH₂Cl₂ yielded five heterobimetallic trinuclear Mo(W)–Cu–S clusters with the formula Cu₂MS₄L₂ (M = Mo(1), W(3), L = 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀), Cu₂MoS₄L₂ · CH₂Cl₂ (2) and Cu₂MOS₃L₂ (M = Mo(4),W(5)). All the clusters have been characterized by elemental analysis, FT-IR, UV/Visible, ¹H and ¹³C NMR spectroscopy and X-ray structure determination. X-ray crystal structure analysis showed that the metal skeleton of these clusters could be classified into two types. With (NH₄)₂MS₄ (M = Mo, W), the three metal atoms (two Cu atoms and one M atom (M = Mo, W)) are almost in a linear conformation, while with (NH₄)₂MOS₃ the conformation of the heterobimetallic trinuclear cluster core was a butterfly-shaped (or referenced as defective cubane-like with two corners missing). The coordination sphere of the metal atoms in all the clusters, either for Cu or M, should be described as a distorted tetrahedron. For each cluster, the closo carborane diphosphine ligand 1,2-(PPh₂)₂-1,2-C₂B₁₀H₁₀ was introduced into the Cu₂MS₄ or Cu₂MOS₃ cluster cores and coordinated bidentately through the P atoms to Cu(I), and this resulted in a stable five-member chelating ring between the bis-diphosphine ligand and the metal.     

Rapid geometrical equilibrium of palladium(II) complexes with tris[2-(diphenylphosphino)ethyl]phosphine disulfide and diselenide and their catalytic activity for Suzuki coupling reaction

Palladium(II) complexes with a tetradentate pseudo-tripodal ligand having two phosphino groups and two phosphine sulfide or selenide groups, pp₃X₂ (pp₃ = tris[2-(diphenylphosphino)ethyl]phosphine, X = S (1) or Se (2)), were prepared from [PdCl(pp₃)]Cl. Both of these phosphine chalcogenide complexes 1 and 2 showed rapid equilibrium between the five-coordinate [PdCl(pp₃X₂)]Cl with two bound phosphine chalcogenide groups and four-coordinate [PdCl₂(pp₃X₂)] with two dissociated pendant ones in chloroform. The thermodynamic parameters for the reaction, [PdCl(pp₃X₂)]⁺ + Cl⁻?[PdCl₂(pp₃X₂)], were obtained by low-temperature ³¹P NMR as follows: K²⁹⁸ = 3.7 × 10³ and 5.4 × 10² mol⁻¹, ΔH^° = 11.3 ± 0.3 and 13.4 ± 0.4 kJ mol⁻¹, and ΔS^° = 106 ± 2 and 97 ± 2 J mol⁻¹ K⁻¹ for 1 and 2, respectively. The rate for the geometrical change at 246.7 K for 1 was appreciably faster than that for 2. These thermodynamic and kinetic results indicate that the phosphine selenide Se atoms can stabilize the five-coordinate structure by effective π-back donation from Pd(II) compared with the phosphine sulfide S atoms. Difference in retention of the catalytic activity for Suzuki coupling, 2 > 1 > [PdCl(pp₃ or p₃)]Cl, was explained by difference in the π-accepting ability that stabilizes the catalytically active Pd(0) species. Considering the rapid dissociation-coordination equilibrium of the phosphine chalcogenide groups on Pd(II), it is probable that the oxidative addition and the subsequent transmetallation of the Pd(II) species are hardly blocked by the phosphine chalcogenide groups.