Ir-catalyzed asymmetric allylic amination using chiral diaminophosphine oxides

An Ir-catalyzed asymmetric allylic amination using chiral diaminophosphine oxide is described. Asymmetric allylic amination of terminal allylic carbonates proceeded in the presence of 2 mol % of Ir catalyst, 2 mol % of chiral diaminophosphine oxide, 5 mol % of NaPF₆, and BSA, affording the chiral branched allylic amines in up to 95% ee.     

Enantioselective conjugate addition of dialkylzinc to cyclic enones catalyzed by chiral binaphthyldiamine-copper(I) complexes

The enantioselective conjugate addition of dialkylzinc (R₂Zn) to cyclic enones was examined using chiral binaphthyldiamine-copper(I) catalysts. Under the present reaction conditions, chiral C₂-symmetric [RZn(II)]₂-diamine-Cu(I) complexes were formed from chiral binaphthyldiamine, R₂Zn, and copper(I or II) chloride in situ. The reaction of 2-cyclohexenone with Et₂Zn proceeded smoothly in the presence of the corresponding chiral copper(I) complex (5 mol %) and achiral 2,6-diphenylaniline (10 mol %), and the desired Et-adduct was obtained with up to 76% ee in 95% yield.     

Relative quantification of enantiomers of chiral amines by high-throughput LC–ESI-MS/MS using isotopic variants of light and heavy l-pyroglutamic acids as the derivatization reagents

l-Pyroglutamic acid (l-PGA) was evaluated as a chiral labeling reagent for the enantioseparation of chiral amines in terms of separation efficiency by reversed-phase chromatography and detection sensitivity by ESI-MS/MS. Several amines and amino acid methyl esters were used as typical representatives of the chiral amines. Both enantiomers of the chiral amines were easily labeled with l-PGAs at room temperature for 60 min in the presence of 1-(3-dimethylaminopropyl)-3-ethylcarbodiimide and 1-hydroxy-1H-benzotriazole as the activation reagents. The resulting diastereomers were completely separated by reversed-phase chromatography using the small particle (1.7 μm) ODS column (Rs = 1.6–6.8). A highly sensitive detection at a low-fmol level (1–4 fmol) was also obtained from the multiple reaction monitoring (MRM) chromatograms. Therefore, a high-throughput determination was achieved by the present UPLC–ESI-MS/MS method.     

Enantiomeric analysis of rivastigmine in pharmaceuticals by cyclodextrin-modified capillary zone electrophoresis

Chiral separation method development is usually very time-consuming due to the diversity in chemical structures of pharmaceutical drug substances as well as the suitable separation conditions and the problem to choose the appropriate chiral selector. This paper shows capillary zone electrophoresis (CZE) which was developed for chiral separation of a basic compound - rivastigmine (RIV) using 30 cm × 50 μm i.d. polyacrylamide (PAA)-coated fused-silica capillary (effective length 20 cm), amine-modified phosphate buffer of pH 2.5 and sulfated-β-CD (S-β-CD) as chiral selector. Other selected native or derivatized cyclodextrins (CDs) were also tested: β-CD (5, 30 mM), carboxymethyl-β-CD (5, 30 mM), dimethyl-β-CD (15 mM), hydroxypropyl-β-CD (5, 30 mM), hydroxypropyl-α-CD (5, 30 mM) and hydroxypropyl-γ-CD (5, 30 mM). Complete enantiomeric separation of RIV was achieved at 20 kV, 18 °C and detection at 200 nm within 8 min with R.S.D. for the absolute migration time reproducibility of less than 2.1%. Rectilinear calibration range was 5.0-500.0 μM of each enantiomer (r = 0.9994-0.9995). The CZE method proposed was used for the control of chiral purity of pharmaceutically active S-RIV and for the analysis of Exelon caps preparation.     

Asymmetric hydrogenation of methyl α-benzamido cinnamate in ionic liquid solvent

The room temperature ionic liquid EMIMOTf was employed as the sole reaction solvent for the asymmetric hydrogenation of methyl α-benzamido cinnamate. Under conditions of 60 psi hydrogen and 50 °C for 24 h, near quantitative conversions were observed using both the achiral DiPFc-Rh catalyst, and the chiral EtDuPHOS-Rh catalysts. Enantiomeric excess of 89% ee was observed for hydrogenations carried out with the chiral catalyst.     

Hyphenation of ionic liquid albumin glassy carbon biosensor or protein label-free sensor with differential pulse stripping voltammetry for interaction studies of human serum albumin with fenoprofen enantiomers

A new biosensor or protein label-free sensor composed of 1-butyl-3-methylimidazolium hexafluorophosphates (BMIMPF₆)-human serum albumin (HSA) film on glassy carbon electrode (GCE) was produced. Unfortunately, the native proteins themselves are often unstable in physiological conditions. Here, we introduced conjugation with ionic liquid (IL) such as BMIMPF₆ which improved the stability and binding affinity of protein onto GCE. A rapid, simple and reliable method for the chiral discrimination and real time protein binding studies of fenoprofen enantiomers with HSA was developed by hyphenating ionic liquid albumin glassy carbon (ILAGC) biosensor with differential pulse cathodic stripping voltammetry under physiological conditions. The electrochemical behavior of chiral fenoprofen was monitored by cyclic voltammetry, from which large response was obtained from l-fenoprofen. The surface coverage of fenoprofen enantiomers was calculated by double potential-step chronocoulometry. The binding constants of chiral fenoprofen with HSA were estimated to be 3.2 × 10⁵ ± 0.3 L mol⁻¹ and 0.8 × 10⁴ ± 0.4 L mol⁻¹ for l- and d-fenoprofen, respectively giving acceptable precision (SD ≤ 0.4) and good agreement with the literature values. The competitive interactions of ibuprofen with fenoprofen enantiomers–HSA were studied giving a significant decreasing in the binding degrees of analytes to HSA. The reciprocal competitive experiments indicated that l-fenoprofen replaced d-fenoprofen from HSA. The proposed electrochemical biosensor holds great potential for chiral discrimination and real time binding studies of drugs with protein.     

Separation of chiral primary amino compounds by forming a sandwiched complex in reversed-phase high performance liquid chromatography

Separation of chiral primary amino compounds was efficiently achieved under reversed-phase high performance liquid chromatography (RP-HPLC) conditions using a mixture of non-chiral crown ether (18-crown-6) and dimethyl-β-cyclodextrin (DM-β-CD) in the mobile phase. Under these conditions, the amino group of the chiral compound was protonated in a low pH mobile phase, and then interacted with 18-crown-6 and DM-β-CD to form a sandwiched complex [18-crown-6 + amine + CD]. Enantiomers of the compound in the sandwiched complex were separated with good enantioselectivity. Formation of the sandwiched complex among the chiral compound and additives in the mobile phase is a key step of the chiral separation. Four different chiral amino compounds namely, 1-aminoindan (AI), 1,2,3,4-tetrahydro-1-naphthylamine (THNA), tyrosine (Tyr), and phenylalanine (Phe), were selected to demonstrate the separation using the sandwiched complex mechanism in RP-HPLC.     

Chiral salen Mn(III) complex-based enantioselective potentiometric sensor for l-mandelic acid

A new enantioselective potentiometric sensor containing chiral salen Mn(III) as the chiral selector was designed for the assay of l-mandelic acid (l-MA). Optimized membrane electrodes displayed linear dynamic range from 1 × 10⁻⁵ to 1 × 10⁻¹ mol L⁻¹ with a detection limit of 7.2 × 10⁻⁶ mol L⁻¹ and a Nernstian response of −58.1 ± 0.5 mV decade⁻¹ towards l-MA within pH range 7.0-10.2. The potentiometric enantioselectivity coefficient () of this sensor was −4.0, indicating that the chiral salen Mn(III) complex-based electrode exhibited fairly good discrimination toward l-MA over counter isomer d-MA. The mechanism of chiral recognition for l-MA is discussed by using HF/STO-3G calculation method simulation.     

Determination of aminoglutethimide enantiomers in pharmaceutical formulations by capillary electrophoresis using methylated-β-cyclodextrin as a chiral selector and computational calculation for their respective inclusion complexes

A capillary electrophoretic method for the separation of the aminoglutethimide (AGT) enantiomers using methylated-β-cyclodextrin (M-β-CD) as chiral selector is described. Several parameters affecting the separation were studied, including the type and concentration of chiral selector, buffer pH, voltage and temperature. Good chiral separation of the racemic mixture was achieved in less than 9 min with resolution factor Rs = 2.1, using a fused-silica capillary and a background electrolyte (BGE) of tris-phosphate buffer solution (50 mmol L⁻¹, pH 3.0) containing 30 mg mL⁻¹ of M-β-CD. The separation was carried out in normal polarity mode at 25 °C, 16 kV and using hydrostatic injection. Acceptable validation criteria for selectivity, linearity, precision, and accuracy/recovery were included. The proposed method was successfully applied to the assay of AGT enantiomers in pharmaceutical formulations. The computational calculations for the inclusion complexes of the R- and S-AGT-M-β-CD rationalized the reasons for the different migration times between the AGT enantiomers.     

Application of an immobilised amylose-based chiral stationary phase to the development of new monoamine oxidase B inhibitors

A direct HPLC enantioseparation of three new chiral oxadiazoline derivatives endowed with potential MAO-B inhibitory activity was accomplished on the immobilised Chiralpak IA chiral stationary phase. Multi-mg amounts of enantiomers with high enantiomeric purity (ee ≥ 98%) were rapidly collected using pure dichloromethane as eluent. The absolute configuration and chiroptical properties of the enantiomers isolated at semipreparative scale were exhaustively determined.     

Effect of alkylimidazolium substituents on enantioseparation ability of single-isomer alkylimidazolium-beta-cyclodextrin derivatives in capillary electrophoresis

A family of 6-mono(3-alkylimidazolium)-β-cyclodextrins with one primary hydroxyl group replaced by an alkylimidazolium cation has been developed. The effect of alkyl substitutents on the enantioresolution ability of these single-isomer cyclodextrins towards dansyl amino acids has been studied by capillary electrophoresis. Systematical investigations on the effect of buffer pH and selector concentration on the enatioseparation show that chiral selectors with a shorter alkyl chain (R = C_nH_2n+1, n ≤ 4) presented more powerful chiral recognition ability. These newly introduced single-isomer β-cyclodextrin derivatives proved to be effective chiral selectors for most selected dansyl amino acids at low buffer pH (e.g. pH 5.0) with selector concentration no less than 3 mM. The apparent complex stability constants between alkylimidazolium β-CDs and dansyl amino acids were also theoretically determined by using the mobility difference model proposed by Wren and Rowe. The side alkyl chains from both dansyl amino acids and alkylimidazolium β-CDs displayed significant effect on the apparent complex stability constants. Both the optimum selector concentrations calculated according to the model, however, were much lower than the experimental values giving the maximum chiral resolution of enantiomers.     

Synthesis and enantiomeric recognition ability of 22-crown-6 ethers derived from rosin acid and BINOL

Four novel chiral 22-crown-6 ethers 6a-b, 7a-b bearing hydroxyl side groups derived from rosin acid and BINOL were prepared in optically pure forms, and their enantiodiscriminating abilities towards protonated primary amines and amino acid methyl ester salts were examined by UV-vis titration methods. These receptors exhibited good chiral recognition towards the isomers (up to K_D/K_L = 6.02, ΔΔG₀ = 4.45 kJ mol⁻¹) and showed different complementarity to various chiral guests.     

Cu-catalysed asymmetric 1,4-addition of Me3Al to nitroalkenes. Synthesis of (+)-ibuprofen

Trimethylaluminium undergoes enantioselective (ee up to 93%) copper-catalysed Michael addition to various nitroalkenes. Copper thiophenecarboxylate (CuTC) (2 mol %) and 4 mol % of a chiral phosphoramidite ligand are sufficient for a complete and clean reaction. The synthesis of (+)-ibuprofen is described with 82% ee.     

Bidentate ligand-catalyzed enantioselective addition of RZnX to benzaldehyde

Enantioselective addition of RZnX (R = alkyl, X = Cl, OAc) was studied using chiral chelating agents, particularly metal-alkoxides. Moderate enantioselectivity was achieved in the presence of magnesium-TADDOLate using RZnOAcMg(OAc)Br as the alkylating agent.     

Development and validation of a chiral HPLC method for rapid screening of allylic alcohol asymmetric epoxidation processes

A simple and rapid HPLC method has been developed using a polysaccharide chiral stationary phase (Chiralpak AD-H) for the resolution of glycidyl tosylate enantiomers. These compounds were obtained by asymmetric epoxidation of allyl alcohol with chiral titanium-tartrate complexes as catalyst after in situ derivatization of the intermediate glycidols. Separations were achieved using two types of mobile phase: a normal-phase (n-hexane), and a polar-phase (methanol or acetonitrile). The influence of the type and concentration of organic modifier in the mobile phase (ethanol or 2-propanol), the flow rate and the column temperature was investigated. In normal-phase mode, the optimized conditions were: n-hexane/ethanol 70/30 (v/v) at a flow rate of 1.2 mL min⁻¹ and 40 °C. In polar-phase mode, the optimized conditions were: methanol at a flow rate of 0.8 mL min⁻¹ and 20 °C. In both cases, analysis time was ≤11 min and the chiral resolution was ≥2. Nevertheless, due to the better Rs obtained in normal-phase mode, only this method was validated to avoid peaks overlapping in real samples. This method was found to be linear in the 5-300 μg mL⁻¹ range (R² > 0.999) with an LOD of 1.5 μg mL⁻¹ for both glycidyl tosylate enantiomers. Repeatability and intermediate precision at three different concentrations levels were below 0.5 and 7.2% R.S.D. for retention time and area, respectively. This method was applied successfully for the determination of glycidyl tosylate enantiomers after in situ derivatization of glycidols obtained in allylic alcohol asymmetric epoxidation processes with chiral titanium-tartrate complexes as catalysts.     

Reversal of the enantiomeric elution order of some aromatic amino acids using reversed-phase chromatographic supports coated with the teicoplanin chiral selector

In this paper, two chiral stationary phases were prepared by coating the surface of both C8 and C18 high-performance liquid chromatography (HPLC) supports with the teicoplanin chiral selector. The hydrophobic C11 acyl side chain, attached to the d-glucosamine group of teicoplanin, served as anchor moiety for the immobilization of the chiral selector on the apolar support material. The retention and enantioselectivity of these coated stationary phases were studied using some aromatic amino acids as probe solutes and an aqueous solution as mobile phase. It was found that the enantiomer elution order on the modified C8 and C18 stationary phases was reversed (l > d) relatively to that classically observed with a teicoplanin covalently immobilized on a silica support (d > l). Such a dynamic coating on the reversed-phase supports was found to be of interest since the apparent enantioselectivity was not significantly changed by the use during an extended period of time or following a long-term storage of the columns.     

Enantioseparation of dansyl amino acids and dipeptides by chiral ligand exchange capillary electrophoresis based on Zn(II)-l-hydroxyproline complexes coordinating with γ-cyclodextrins

A chiral ligand exchange capillary electrophoresis (CLE-CE) method using Zn(II) as the central ion and l-4-hydroxyproline as the chiral ligand coordinating with γ-cyclodextrin (γ-CD) was developed for the enantioseparation of amino acids (AAs) and dipeptides. The effects of various separation parameters, including the pH of the running buffer, the ratio of Zn(II) to l-4-hydroxyproline, the concentration of complexes and cyclodextrins (CDs) were systematically investigated. After optimization, it has been found that eight pairs of labeled AAs and six pairs of labeled dipeptides could be baseline-separated with a running electrolyte of 100.0 mM boric acid, 5.0 mM ammonium acetate, 3.0 mM Zn(II), 6.0 mM l-hydroxyproline and 4.0 mM γ-CD at pH 8.2. The quantitation of AAs and dipeptides was conducted and good linearity (r² ≥ 0.997) and favorable repeatability (RSD ≤ 3.6%) were obtained. Furthermore, the proposed method was applied in determining the enantiomeric purity of AAs and dipeptides. Meanwhile, the possible enantiorecognition mechanism based on the synergistic effect of chiral metal complexes and γ-CD was explored and discussed briefly.     

Direct chiral resolution and its application to the determination of fungicide benalaxyl in soil and water by high-performance liquid chromatography

A simple chiral high-performance liquid chromatography (HPLC) method with ultraviolet (UV) and circular dichroism (CD) detection was developed and validated for measuring benalaxyl enantiomers using (R,R) Whelk-O 1 column. The effects of mobile phase composition and column temperature on the entioseparation were investigated. A CD detector was used to determine the elution order of the enantiomers. Excellent resolution was easily obtained using n-hexane-polar organic alcohols mobile phase. The chiral recognition mechanism was also discussed. Based on the developed chiral HPLC method, enantioselective analysis methods for this fungicide in environment matrix (soil and water) were developed and validated. Good linearities were obtained over the concentration range of 0.25-25 mg L⁻¹ for both enantiomers. Liquid-liquid extraction and solid phase extraction (SPE) were used for the enrichment and cleanup of soil and water samples. Recoveries for the two enantiomers were 79-91% at 0.02, 0.04 and 0.2 mg kg⁻¹ levels from soil, and 89-101% at 0.0025, 0.01 and 0.05 mg L⁻¹ levels from water. Run-to-run and day-to-day assay precisions were below 10% for both enantiomers at concentrations of 0.5, 1 and 5 mg L⁻¹. Individual detection limits of the two enantiomers were both 2 ng. Limits of detection (LOD) were 0.004 mg kg⁻¹ in soil and 0.001 mg L⁻¹ in water.     

Fast enantiomeric separation of propranolol by affinity capillary electrophoresis using human serum albumin as chiral selector: application to quality control of pharmaceuticals

In the last years, capillary electrophoresis (CE) has gained considerable interest in pharmaceutical laboratories for controlling the chiral purity of drugs. This paper describes a simple and fast method for resolution of propranolol enantiomers by affinity capillary electrophoresis (ACE) using human serum albumin (HSA) as chiral selector. The effect of several experimental variables such as HSA concentration, temperature, chiral selector plug length and addition of organic modifiers, on the separation is evaluated. Complete enantioresolution of R- and S-propranolol was achieved in less than 5 min when the capillary was completely filled with 100 μM HSA solution and the electrophoresis was carried out with 67 mM phosphate buffer (pH 7.4) at 20 kV and 35 °C. Peaks were assigned to each propranolol enantiomer according to their relative affinities to HSA. The proposed method was applied to the analysis of pharmaceutical preparations containing propranolol. Resolution, accuracy, reproducibility, cost and sample throughput of the proposed method make it suitable for quality control of the enantiomeric composition of propranolol in pharmaceuticals.