高效液相色谱法测定皮革中20种溴代阻燃剂

建立了皮革中20种多溴联苯和多溴联苯醚阻燃剂的高效液相色谱测定方法。采用V(二氯甲烷):V(正己烷)=3:2混合溶剂作为提取溶剂,常温超声萃取30 min,经硅胶固相萃取柱净化,蒸发浓缩至近干后用甲苯定容。用甲醇-缓冲溶液(pH 7)为流动相梯度洗脱,C18反相萃取柱分离目标物质,于226 nm检测。通过优化色谱梯度洗脱条件,有效排除了溶剂峰对低取代物的干扰。结果表明,目标物质质量浓度在5.0~25.0 mg/L范围内线性关系良好,相关系数大于0.996,定量限(S/N=10)为5.20~41.7 mg/kg,选定物质六溴联苯和十溴联苯醚的加标回收率为91.3%~102.9%。该法对所采用的20种目标物质中的16种都具有良好的分离效果,且对高溴代物的响应较好,可弥补气相色谱法对高溴代物灵敏度低的问题。方法可用于皮革中多溴联苯和多溴联苯醚的检测。     

高分辨气相色谱-高分辨质谱测定活性污泥中的多溴联苯醚

建立了利用高分辨气相色谱-高分辨质谱定量测定多溴联苯醚(PBDEs)的方法,参与了测定PBDEs的国际比对实验,实验结果表明该法是可行的。对不同地区（北京、山东临沂、上海）的3个污水处理厂的活性污泥进行了索氏提取、多层复合硅胶柱分离,然后用所建立的方法测定了19种多溴联苯醚单体的含量。结果表明,北京某污水处理厂的活性污泥中PBDEs的总量高于其他两者。     

气相色谱-质谱联用检测塑料产品中溴化阻燃剂

建立了气相色谱-质谱联用测定塑料产品中多溴联苯和多溴联苯醚的方法.以甲苯为提取溶剂,超声提取电子电气产品中多溴联苯(PBBs)和多溴联苯醚 (PBDEs),采用气相色谱-质谱法(GC-MS)检测.SCAN和SIM同时扫描,采用质谱特征离子定量分析.结果表明: 9种多溴联苯(PBBs)和10种多溴联苯醚(PBDEs)的线性关系、检出限、回收率和精密度都较好,RSD均<5.0%,PBBs回收率在97%～111%之间;PBDEs回收率在82%～115%之间.本方法前处理简便,灵敏度高,定性、定量分析准确可靠,且分析时间短,适用于塑料产品中PBBs和PBDEs的测定.     

大流量采样-GC-NCI-MS测定环境空气中的多溴联苯醚

建立了大流量采样-气相色谱负化学电离质谱法测定环境空气中痕量多溴联苯醚的方法.用PS-1型大流量空气采样器采集环境空气样品,样品经提取、纯化后采用气相色谱负化学电离质谱法测定环境空气中多溴联苯醚.方法的线性范围在5～10000 pg/m3之间,检出限1～50 pg/m3.用于检测2006年5月在广州市采集的环境空气样品,多溴联苯醚组分含量在5.4～4989 pg/m3范围.该方法适合用于监测环境空气中的痕量PBDEs.     

全二维气相色谱/飞行时间质谱法定性筛查鱼肉组织中含卤有机污染物

采用全二维气相色谱/飞行时间质谱(GC×GC-TOFMS),建立了鱼肉样品中含卤有机污染物的定性和定量分析方法.鱼肉样品用正己烷丙酮(1∶1,V/V)提取,凝胶色谱和复合硅胶柱净化,浓缩富集,全二维气相色谱联用飞行时间质谱(DB-5MS毛细管色谱柱联HT-8色谱柱)检测.软件自动识别后,经三步筛查,共鉴定出含氯或溴化合物72种,其中包括33种多氯联苯,9种有机氯农药,4种多溴联苯醚,4种DDT代谢产物,2种氯代茴香醚,2种氯苯乙烯,1种氯代茴香硫醚及1种甲基三氯生.另外,从质谱信息上看,有16种化合物明显含氯或含溴,但是因为缺少必要的谱库信息不能准确识别.采用外标定量法,对鱼肉样品中检出的主要的10种多氯联苯和1种多溴联苯醚进行了准确定量分析.     

二噁英、多溴联苯醚和多氯联苯同时测定方法的研究

本实验以美国环保署1613B、1614和1668A等标准方法为基础,建立了同一样品中二噁英、多溴联苯醚和多氯联苯的同位素稀释-多层色谱柱净化-高分辨气质联用-高通量同时分析方法.该方法利用弗罗里土对二噁英组分吸附能力强的特点,采用不同极性的溶剂淋洗,先实现二噁英组分和其它两个组分的分离,再利用多溴联苯醚更易保留在硝酸银硅胶(10%)柱上的特点,实现了多溴联苯醚和多氯联苯两类化合物的分离.实验优化了样品前处理过程,纯化过程中去除了大量干扰物质,同时将三类化合物在前处理中进行分离,消除了相互干扰,实现了准确定量.纯化效果和检测限均符合美国环保署相关标准的要求.通过标准参考物的比对和实际样品的分析验证了方法的可靠性和结果的准确性.     

气相色谱质谱法分析土壤中多溴联苯和多溴联苯醚类化合物

建立了气相色谱-质谱法(GC-MS)分析土壤中的18种多溴联苯(PBBs)和多溴联苯醚类(PBDEs)化合物的方法.利用快速溶剂萃取(ASE)技术和凝胶净化系统(GPC)进行土壤样品的前处理,(13)C标记物作为进样内标和替代标,采用电子轰击源气相色谱质谱法(GC-EI/MS )分析-溴至七溴代PBBs和PBDEs,负...     

微波辅助萃取-气相色谱测定纺织品中多溴联苯(醚)类阻燃剂

建立了微波辅助萃取-气相色谱-微电子捕获检测纺织品中8种多溴联苯及多溴联苯醚类阻燃剂的方法.通过萃取剂选择实验和正交实验,确定了以25 mL正己烷: 二氯甲烷混合溶剂(2:3, V/V)为萃取剂,萃取温度60℃, 仪器功率400 W,萃取10 min的微波萃取条件,并用流速梯度和柱温程序结合的方法优化了气相色谱分析条件.方法的检出限为0.12～0.99 μg/kg;标准加入回收率为75.5%～112.9%;精密度1.3%～11.8%(n=6),适用于纺织品中痕量多溴联苯(醚)类阻燃剂的监测分析.     

固相萃取-浓硫酸净化-气相色谱/三重四极杆串联质谱法测定水中的8种多溴联苯醚

建立了固相萃取-浓硫酸净化-气相色谱/三重四极杆串联质谱(SPE-GC-MS/MS)分析水中8种多溴联苯醚(PBDEs,BDE-28,BDE-47,BDE-99,BDE 100,BDE-153,BDE-154,BDE-183和BDE-209)的方法。方法采用改进的色谱柱可同时分析高溴代联苯醚BDE209,采用浓硫酸净化固相萃取后的样品和串联质谱特有的多反应监测模式,可以很好地去除基质干扰和提高定性的准确性。通过优化三重四极杆串联质谱的碰撞电压、扫描峰宽和离子对等条件,使8种多溴联苯醚的检测灵敏度显著提高。8种多溴联苯醚的浓度在0.1～50 ng/mL(BDE209:1～500 ng/mL)范围内线性良好,回归系数均大于0.9997。方法回收率在49%～110%,相对标准偏差在1.4%～6.0%之间。方法可用于实际地表水体中PBDEs的定量检测。     

母乳中溴代/氯代阻燃剂及其代谢产物的分析检测方法

建立了低分辨气相色谱-负化学源质谱法(GC/NCI-LRMS)定性与定量检测母乳中的溴代/氯代阻燃剂及其代谢产物的方法。所检测的溴代/氯代阻燃剂及其代谢产物分为中性化合物和羟基化合物两部分。采用RTX-1614(30 m)作为色谱分离柱,在优化的色谱条件下对8种多溴联苯醚PBDEs(包括BDE209)及其甲氧基代谢产物MeO-PBDEs,多种其它阻燃剂及代谢物等中性化合物同时进行了分离检测;采用DB-5(30 m)作为色谱分离柱,在优化的色谱条件下分离检测了9种羟基多溴联苯醚OH-PBDEs。在母乳样本中加入代用标准或内标,经过超声提取、液液萃取、硅胶净化和浓缩定容等预处理后,分别对中性和羟基化合物进行测定。十溴联苯醚、其它多溴联苯醚、甲氧基多溴联苯醚、得克隆及脱氯产物、其它阻燃剂等中性化合物,及羟基多溴联苯醚在两个添加浓度水平的回收率分别为66.5%～75.4%,84.2%～126.4%,60.9%～115.1%,86.7%～104.9%,42.9%～113.8%和64.7%～129.5%;中性化合物的相对标准偏差均小于22%,羟基化合物的相对标准偏差均小于30%。利用本方法对我国电子垃圾拆解区人体母乳中的目标物进行了分析检测,结果可靠。     

Gas chromatographic analysis of high-molecular-mass polycyclic aromatic hydrocarbons II. Polycyclic aromatic hydrocarbons with relative molecular masses exceeding 328

Three columns were used for the gas chromatographic analysis of polycyclic aromatic hydrocarbons (PAHs) with relative molecular masses (M_r) up to 450. Two of the columns were commercially available, coated with a 50% methyltrifluoropropyl-substituted polysiloxane a 5% diphenyl-substituted methylpolysiloxane. The third column was laboratory made, coated with a biphenyl-substituted silarylene-siloxane copolymer. All three columns were utilized for the analysis of high-M_r PAHs as regards both thermal stability of the stationary phases, i.e., low bleeding rate, and chromatographic efficiency. The column coated with a trifluoropropyl-substituted stationary phase showed, however, a low separation efficiency, possibly owing to low solute stationary phase compatibility. The biphenyl-substituted stationary phase, on the other hand, showed a very high separation efficiency, but the retention of the PAHs was significantly higher on this column compared with the other two, leading to the demand for higher oven temperatures. Different retention mechanisms were observed on these columns, as shown by differences in the retention indices of the PAHs measured in a system using PAHs as retention index markers. A comparatively faster elution of non-planar PAHs was observed on the columns coated with the trifluoropropyl-substituted stationary phase and the biphenyl-substituted stationary phase compared with the column coated with the 5% diphenyl-substituted polymer. The usefulness of the columns for separations of high-M_r PAHs is demonstrated by gas chromatograms of carbon black extracts and a coal tar extract standard reference material.     

Comparison of GC stationary phases for the separation of fatty acid methyl esters in biodiesel fuels

The fatty acid methyl ester (FAME) content of biodiesel fuels has traditionally been determined using gas chromatography with a polar stationary phase. In this study, a direct comparison of the separation of FAMEs present in various biodiesel samples on three polar stationary phases and one moderately polar stationary phase (with comparable column dimensions) was performed. Retention on each column was based on solubility in and polarity of the phase. Quantitative metrics describing the resolution of important FAME pairs indicate high resolution on all polar columns, yet the best resolution, particularly of geometric isomers, is achieved on the cyanopropyl column. In addition, the separation of four C18 monounsaturated isomers was optimized and the elution order determined on each column. FAME composition of various biodiesel fuel types was determined on each column to illustrate (1) chemical differences in biodiesels produced from different feedstocks and (2) chemical similarities in biodiesels of the same feedstock type produced in different locations and harvest seasons.     

Azulene-Modified Polysiloxanes as Gas Chromatographic Stationary Phases: Comparison of the Separatory Properties of Azulene and Naphthalene

Azulene is an aromatic molecule with interesting properties, most notably a permanent dipole moment of 1.08D. This degree of polarity in the absence of heteroatoms is quite rare and offers potential for use in unique gas chromatographic stationary phases. Here, we report the first examples of azulene-derivatized stationary phases for gas chromatographic separations. Poly(dimethyl/azulenylmethyl) siloxane polymers containing 15 and 35% of an azulene derivative were synthesized, coated on capillary columns, and evaluated. To compare the effects of increased polarity vs. the effects of polarizability, isomeric naphthalene analogues were also prepared, coated, and evaluated. The coated phases displayed efficiencies up to 2700 plates/m. For both azulene and naphthalene columns, retention increased as substitution level increased. The more polarizable naphthalene columns tended to retain analytes more strongly. Columns were also evaluated for the separation of several different mixtures of isomers against a commercial HP-5 column. All azulene and naphthalene columns exhibited separations comparable to the commercial column. The solvation thermodynamic parameters phases were measured, showing an excellent linear relationship and no change in the mechanism of interaction over the temperature range measured.     

聚硅氧烷离子液体用于快速气相色谱固定相的研究

合成了聚硅氧烷键合离子液体[PSOMIM][NTf2],并将其用作快速气相色谱柱的固定相.初步探索了采用短柱及小内径毛细管柱(3 m×75 μm i.d.)时的分离性能及固定相膜厚对分离性能的影响.与常规柱(8m×0.25 mmi.d.)相比,在不损失分离度的前提下,分离速度可提高1～6倍;当膜厚为0.056 μm时,可以将分离速度提高2～4倍.实验结果表明,聚硅氧烷键合离子液体固定相可以有效弥补由于缩短柱长所导致的分离度减小的问题,在快速气相色谱固定相方面具有较好的应用前景.     

纤维素衍生物作为毛细管气相色谱新型固定相的研究

以纤维素三苯甲酸酯、纤维素三苯基氨基甲酸酯以及二者的混合物为固定相,制备了新型毛细管气相色谱柱,最高柱效达到2580板/米。其能对一些难分离物质对、位置异构体以及手性化合物进行拆分,如对丙氨酸的分离因子可达到1·13。此外,还研究了毛细管柱的极性、选择性以及保留机理。结果表明,该类聚合物是一类很有前景的新型气相色谱固定相。     

丙烯腈与二乙烯苯原位聚合制备强极性高聚物涂层毛细管柱

以丙烯腈为单体，二乙烯苯为交联剂，采用原位聚合法制备出了强极性的有机高聚物多孔层开管柱－ＯＰＰＬＯＴ－Ａ型柱。对影响制备的因素如致孔剂的选择，反应温度与反应时间，引发剂的选择及浓度等进行了讨论。应用扫描电镜和红外光谱对形成的高聚物固定相的结构进行了表征。实验表明该柱对腈、醛类等化合物有好的分离性能。     

Analysis of seven chlorobiphenyl congeners by multidimensional gas chromatography

Chlorobiphenyl congeners (CBs) are used as indicator compounds in analysis performed to determine whether or not PCB concentrations in food products, waste mineral oil, and environmental samples comply with the maximum levels permitted by legislation. Seven of these compounds have been checked for coelution with other CB congeners by means of a multidimensional gas chromatographic method utilizing a combination of two narrow bore columns, one coated with a conventional non-polar stationary phase and the other with a liquid crystalline (smectic) stationary phase. Peaks of the relevant CBs have been transferred, by heart cutting, from the non-polar column to the liquid crystal column, on which unambiguous separation from possible coeluting CB congeners was obtained. It has been shown that if the seven congeners are analyzed solely on a single, non-polar capillary column the results obtained for two of them may be affected by coelution of other compounds.     

A study of the surface modification of alumina for GC

Summary A gas chromatographic method for the separation of alkanes and alkenes present in coal mine air has been developed using modified alumina columns. The separation was carried out using a GC equipped with a gas sampling valve, a FID and a surface modified alumina packed column with helium as carrier gas.An investigation was carried out into the effects of surface modifiers on alumina. The study examined the change in retention properties on alumina modified by alkali metal salts and the specific effects of the halide anions and metal cations.The paper describes the preparation of the alumina columns and the effects on selectivity of post heating the stationary phase. The study demonstrated that alumina modified with 2% sodium chloride and post heated to 150°C was the most appropriate stationary phase.     

Comprehensive two-dimensional gas chromatography in the screening of persistent organohalogenated pollutants in environmental samples

Separations of eight persistent organohalogenated classes of pollutants, organochlorinated pesticides (OCPs), polychlorinated biphenyls (PCBs), polychlorinated diphenyl ethers (PBDEs), polychlorinated dibenzo-p-dioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychlorinated naphthalenes (PCNs), polychlorinated terphenyls (PCTs) and toxaphene (CTT) by comprehensive two-dimensional gas chromatography (GC x GC) were evaluated. Columns with different polarity and selectivity, including ZB-5, HT-8, DB-17 and BP-10, were selected as first dimension and combined with columns of increasing polarity in the second dimension, i.e. HT-8, BPX-50 and Carbowax (or Supelcowax-10). In total nine column combinations were tested. Because the main interest of the study was fast screening of the test xenobiotic families in complex matrices, in all cases, attention was primarily focussed on group-type separation. Nevertheless, within-group separation was also considered, especially for those classes containing particularly toxic congeners, such as PCBs and PCDD/Fs. Although none of the assayed column sets allowed the simultaneous and complete separation of all pollutants classes, some column combinations provided satisfactory separations among selected families and the rest of pollutants investigated. That was, for instance, the case of HT-8 x BPX-50 for PBDEs and PCDD/Fs, DB-17 x HT-8 for PCNs and OCPs and BP-10 x BPX-50 for CTT, PCDD/Fs and PBDEs. The feasibility of the proposed approach for the fast screening of the target classes of pollutants in complex samples was illustrated by the analysis of food and marine fat samples prepared using simplified miniaturised sample treatment methods.