Entropy generation applications in flow of viscoelastic nanofluid past a lubricated disk in presence of nonlinear thermal radiation and Joule heating

Entropy generation is the loss of energy in thermodynamical systems due to resistive forces,diffusion processes, radiation effects and chemical reactions. The main aim of this research is to address entropy generation due to magnetic field, nonlinear thermal radiation, viscous dissipation, thermal diffusion and nonlinear chemical reaction in the transport of viscoelastic fluid in the vicinity of a stagnation point over a lubricated disk. The conservation laws of mass and momentum along with the first law of thermodynamics and Fick's law are used to discuss the flow, heat and mass transfer, while the second law of thermodynamics is used to analyze the entropy and irreversibility. The numbers of independent variables in the modeled set of nonlinear partial differential equations are reduced using similarity variables and the resulting system is numerically approximated using the Keller box method. The effects of thermophoresis,Brownian motion and the magnetic parameter on temperature are presented for lubricated and rough disks. The local Nusselt and Sherwood numbers are documented for both linear and nonlinear thermal radiation and lubricated and rough disks. Graphical representations of the entropy generation number and Bejan number for various parameters are also shown for lubricated and rough disks. The concentration of nanoparticles at the lubricated surface reduces with the magnetic parameter and Brownian motion. The entropy generation declines for thermophoresis diffusion and Brownian motion when lubrication effects are dominant. It is concluded that both entropy generation and the magnitude of the Bejan number increase in the presence of slip. The current results present many applications in the lubrication phenomenon,heating processes, cooling of devices, thermal engineering, energy production, extrusion processes etc.     

Hydromagnetic Carreau Nanoliquid in Frames of Dissipation and Activation Energy

The novel characteristics of magnetic field and entropy generation in mixed convective flow of Carreau fluid towards a stretched surface are investigated.Buongiornio nanoliquid model consists of thermophoresis and Brownian movement aspects is opted for analysis.Energy expression is modeled subject to thermal radiation and viscous dissipation phenomenon.Concentration by zero mass flux condition is implemented.Consideration of chemical reaction and activation energy characterizes the mass transfer mechanism.Total entropy generation rate and Bejan number is formulated.The utilization of transformation variables reduces the PDEs into non-linear ODEs.The obtained nonlinear complex problems are computed numerically through Shooting scheme.The impact of involved variables like local Weissenberg number,magnetic parameter,thermal radiation parameter,Brownian motion parameter,thermophoresis parameter,buoyancy ratio parameter,mixed convection parameter,Prandtl parameter,Eckert number,Schmidt number,non-dimensional activation energy parameter,chemical reaction parameter,Brinkman number,dimensionless concentration ratio variable,diffusive variable and dimensionless temperature ratio variable on velocity,temperature,nanoparticles concentration,entropy generation,Bejan number,surface drag force and heat transfer rate are examined through graphs and tables.     

Physical aspects of magnetized Jeffrey nanomaterial flow with irreversibility analysis

This research presents the applications of entropy generation phenomenon in incompressible flow of Jeffrey nanofluid in the presence of distinct thermal features. The novel aspects of various features, such as Joule heating, porous medium, dissipation features, and radiative mechanism are addressed. In order to improve thermal transportation systems based on nanomaterials, convective boundary conditions are introduced. The thermal viscoelastic nanofluid model is expressed in terms of differential equations. The problem is presented via nonlinear differential equations for which analytical expressions are obtained by using the homotopy analysis method (HAM). The accuracy of solution is ensured. The effective outcomes of all physical parameters associated with the flow model are carefully examined and underlined through various curves. The observations summarized from current analysis reveal that the presence of a permeability parameter offers resistance to the flow. A monotonic decrement in local Nusselt number is noted with Hartmann number and Prandtl number. Moreover, entropy generation and Bejan number increases with radiation parameter and fluid parameter.     

New thermodynamics of entropy generation minimization with nonlinear thermal radiation and nanomaterials

This research addressed entropy generation for MHD stagnation point flow of viscous nanofluid over a stretching surface. Characteristics of heat transport are analyzed through nonlinear radiation and heat generation/absorption. Nanoliquid features for Brownian moment and thermophoresis have been considered. Fluid in the presence of constant applied inclined magnetic field is considered. Flow problem is mathematically modeled and governing expressions are changed into nonlinear ordinary ones by utilizing appropriate transformations. The effects of pertinent variables on velocity, nanoparticle concentration and temperature are discussed graphically. Furthermore Brownian motion and thermophoresis effects on entropy generation and Bejan number have been examined. Total entropy generation is inspected through various flow variables. Consideration is mainly given to the convergence process. Velocity, temperature and mass gradients at the surface of sheet are calculated numerically.     

Rapid communication: Permeability of hydrogen in two-dimensional graphene and hexagonal boron nitride sheets

This paper concerns an application to optimal energy by incorporating thermal equilibrium on MHD-generalised non-Newtonian fluid model with melting heat effect. Highly nonlinear system of partial differential equations is simplified to a nonlinear system using boundary layer approach and similarity transformations. Numerical solutions of velocity and temperature profile are obtained by using shooting method. The contribution of entropy generation is appraised on thermal and fluid velocities. Physical features of relevant parameters have been discussed by plotting graphs and tables. Some noteworthy findings are: Prandtl number, power law index and Weissenberg number contribute in lowering mass boundary layer thickness and entropy effect and enlarging thermal boundary layer thickness. However, an increasing mass boundary layer effect is only due to melting heat parameter. Moreover, thermal boundary layers have same trend for all parameters, i.e., temperature enhances with increase in values of significant parameters. Similarly, Hartman and Weissenberg numbers enhance Bejan number.     

Second law analysis of the flow of two immiscible micropolar fluids between two porous beds

This work investigates the effect of entropy generation rate within the flow of two immiscible micropolar fluids in a horizontal channel bounded by two porous beds at the bottom and top. The flow is considered in four zones. Zone IV contains the flow of viscous fluid in the large porous bed at the bottom, zone I and zone II contain the free flow of two immiscible micropolar fluids, and zone III contains the flow of viscous fluid in the thin porous bed at the top. The flow is assumed to be governed by Eringen’s micropolar fluid flow equations in the free channel. Darcy’s law and Brinkman’s model are used for flow in porous zones, namely, zone IV and zone III, respectively. The closed form expressions for entropy generation number and Bejan number are derived in dimensionless formby using the expressions of velocity, microrotation and temperature. The effect of physical parameters like a couple stress parameter and micropolarity parameter on velocity, microrotation, temperature, entropy generation number and Bejan number are investigated.     

Entropy generation in radiative motion of tangent hyperbolic nanofluid in presence of activation energy and nonlinear mixed convection

In this communication, an optimization of entropy generation is performed through thermodynamics second law. Tangent hyperbolic nanomaterial model is used which describes the important slip mechanism namely Brownian and thermophoresis diffusions. MHD fluid is considered. The novel binary chemical reaction model is implemented to characterize the impact of activation energy. Nonlinear mixed convection, dissipation and Joule heating are considered. Appropriate similarity transformations are implemented to get the required coupled ODEs system. The obtained system is tackled for series solutions by homotopy method. Graphs are constructed to analyze the impact of different flow parameters on entropy number, nanoparticle volume concentration, temperature and velocity fields. Total entropy generation rate is calculated via various flow variables. It is noticed from obtained results that entropy number depend up thermal irreversibility, viscous dissipation and Joule heating irreversibility and concentration irreversibility. Decreasing behavior of concentration is witnessed for higher estimations of chemical reaction variable. Entropy number is more for higher Hartmann number, Weissenberg number and chemical reaction variable while contrast behavior is noted for Bejan number.     

Hybrid nanofluid flow over two different geometries with Cattaneo–Christov heat flux model and heat generation: A model with correlation coefficient and probable error

The authors scrutinize the steady, MHD flow of SiO₂−MoS₂/water hybrid nanofluid towards two different geometries i.e. a wedge and a cone. The Tiwari and Das model is implemented with a generalized–Fourier's model, popularized as Cattaneo-Christov heat flux model. Analysis of heat transfer also incorporates the effects of suction, heat generation and thermal radiation. To showcase the relationship between engineering quantities and pertinent parameters involved in the study, the correlation coefficient for heat transfer coefficient and the skin friction coefficient is computed followed by the computation of probable error and statistical declaration. Similarity transformations are utilized to remodel the constitutive laws of flow in non-dimensional form. Numerical computation of non-linear, coupled O.D.E.’s is performed with the support of the Runge-Kutta-Fehlberg scheme and shooting method. Graphical and tabular illustrations of computed results are provided to report the variation in flow properties with the fluctuation in physical parameters. In both cases, i.e. flow close to a wedge and a cone, the temperature of hybrid nanofluid enhances on intensifying the thermal radiation and experiences a decrement with thermal relaxation parameter and magnetic field. Rising values of the suction parameter, thermal relaxation parameter, and thermal radiation cause increment in heat transfer coefficient. Interestingly, it was spotted that the heat generation parameter has contrary effects on temperature distribution over the two geometries.     

A minimum entropy generation procedure for the discrete pseudo-optimization of finned-tube heat exchangers

This paper presents a novel method which can be helpful in assessing the optimal configuration of finned-tube heat exchangers. The method is an extension of the local irreversibilities method [17], and it is based on the determination on a local basis of the two components of the entropy generation rate: the one caused by viscous dissipations and the one due to thermal irreversibilities. Depending on the engineering purpose for which a technical device was designed, it can be argued that the optimal configuration will be that in which either one (or both) of these two entropy generation rates is minimized. For a heat exchanging device, it is important to minimize thermal irreversibilities, but more important is to minimize the mechanical power lost in achieving a prescribed heat-exchange performance: to this purpose, one can form a relative irreversibility index (named Bejan number here and in [17] because the original seed of this procedure can be found in [1]), and use it to assess the merit of a given configuration.In the procedure presented here, a circular, single-tube, finned heat exchanger configuration is considered: the velocity and temperature fields are computed (via a standard finite-element package, FIDAP) for a realistic value of the Reynolds number and for a variety of geometric configurations (various fin external diameters and fin spacing); then, the entropy generation rate is calculated from the flowfield, and is examined both at a local level, to detect possible bad design spots (ie, locations which correspond to abnormally high entropy generation rates, which could be cured by design improvements), and at an overall (integral) level, to assess the entropic performance of the heat exchanger. Optimal curves are given, and the optimal spacing of fins is determined using alternatively the entropy generation rate and the total heat transfer rate as objective functions: different optima arise, and the differences as well as the similarities are discussed in detail.     

Entropy production in the flow over a swirling stretchable cylinder

In the present work, the entropy generation due to the heat transfer and fluid friction irreversibility is investigated numerically for a three-dimensional flow induced by rotating and stretching motion of a cylinder. The isothermal boundary conditions are taken into account for the heat transfer analysis. The similarity transformations are utilized to convert the governing partial differential equations to ordinary differential equations. Resulting nonlinear differential equations are solved using a numerical scheme. Expressions for the entropy generation number, the Nusselt number and the Bejan number are obtained and discussed through graphs for various physical parameters. An analysis has been made to compare the heat transfer irreversibility with fluid friction irreversibility using the expression of the Bejan number. It is found that the surface is a durable source of irreversibility and the curvature of cylinder is to enhance the fluid friction irreversibility.     

Entropy analysis on unsteady MHD biviscosity nanofluid flow with convective heat transfer in a permeable radiative stretchable rotating disk

We examine the entropy analysis in three-dimensional hydromagnetic flow and convective heat transport of a biviscosity nanofluid over a rotating porous disk with a time-dependent stretching rate in the direction of the radius of the circular disk. We also examine the influence of thermal radiation and viscous dissipation due to nanoparticles and applied magnetic field. We invoked suitable self-similar transformations to covert the modeled coupled nonlinear PDEs into a set of nonlinear ODEs. The transformed system of equations is then worked out numerically by a well-known shooting technique and the fourth-order Runge–Kutta–Fehlberge method. The rotating phenomenon yields an additional parameter known as a rotation parameter, which controls the disk’s rotation. The study shows that the fluid motion is accelerated along the radial and cross-radial directions with an increase in the rotation of the disk. The skin-friction and the heat transfer rate at the disk strongly depend on the rotation of the disk, permeability of the porous medium, thermal radiation, and nanoparticle size. The Bejan number quantifies the entropy production of the system. It has a considerable impact on the magnetic field, rotation of the disk, thermal radiation, and Biot number. The efficient performance of the system is possible by a suitable choice of the physical parameters discussed in this article.     

A comparison of different entransy flow definitions and entropy generation in thermal radiation optimization

In thermal radiation, taking heat flow as an extensive quantity and defining the potential as temperature T or the black body emissive power U will lead to two different definitions of radiation entransy flow and the corresponding principles for thermal radiation optimization. The two definitions of radiation entransy flow and the corresponding optimization prin ciples are compared in this paper. When the total heat flow is given, the optimization objectives of the extremum entransy dissipation principles （EEDPs） developed based on potentials T and U correspond to the minimum equivalent temperature difference and the minimum equivalent blackbody emissive power difference respectively. The physical meaning of the definition based on potential U is clearer than that based on potential T, but the latter one can be used for the coupled heat transfer optimization problem while the former one cannot. The extremum entropy generation principle （EEGP） for thermal radiation is also derived, which includes the minimum entropy generation principle for thermal radiation. When the radiation heat flow is prescribed, the EEGP reveals that the minimum entropy generation leads to the minimum equivalent thermodynamic potential difference, which is not the expected objective in heat transfer. Therefore, the minimum entropy generation is not always appropriate for thermal radiation optimization. Finally, three thermal radiation optimization examples are discussed, and the results show that the difference in optimization objective between the EEDPs and the EEGP leads to the difference between the optimization results. The EEDP based on potential T is more useful in practical application since its optimization objective is usually consistent with the expected one.     

MHD swirling flow and heat transfer in Maxwell fluid driven by two coaxially rotating disks with variable thermal conductivity

We develop a mathematical modeling for an electrically conducting non-Newtonian Maxwell fluid flow occurring between two coaxially parallel stretchable rotating disks at constant distant apart. The pressure and heat transfer analysis is carried out subject to the effects of axial magnetic field and temperature dependent thermal conductivity. The stretching and rotating rates of both disks are assumed different from each other. The two diverse phenomena, such as, when both disks are rotating with different angular velocities in the same as well as in the opposite directions are discussed. The similarity procedure adopted by von Kármán is utilized to reduce the governing momentum and energy equations into nonlinear ordinary differential equations. The solution of the governing problem is obtained numerically using bvp4c scheme in Matlab. The effects of active parameters including stretching rates, Deborah number, magnetic number, Prandtl number, thermal conductivity parameter and Reynolds number are examined for same as well as opposite rotation direction for radial, azimuthal, and axial flows, pressure and temperature fields. The classical flow pattern happening between the disks is significantly altered by the stretching action which is a main physical significances of this study. The azimuthal flow is observed higher for the same direction of disks rotation as compared to opposite disks rotation. The pressure field drops near the lower disk with increasing values of Reynolds number. The role of thermal conductivity parameter is quite useful to enhance the fluid temperature.     

Electro-osmotic nanofluid flow in a curved microchannel

Biological mechanisms offer significant improvement in the efficiency of next generation energy systems. Motivated by new developments in distensible pumping systems, ionic electro-kinetic manipulation and nanoscale liquids (”nanofluids”), in the present study a mathematical model is developed to simulate the entropy generation and electro-osmotic transport of nanofluids in a curved deformable microchannel driven by peristaltic transport. Both thermal and species (nano-particle) buoyancy effects are included and Soret and Dufour cross-diffusion effects. The appropriate conservation equations are normalized with scaled variables and the resulting dimensionless nonlinear boundary value problem is solved in a transformed coordinate system. Simplification of the mathematics is achieved via lubrication approximations and low zeta potential (Debye Hückel linearization). The effects of various parameters, i.e. electro-osmotic velocity, EDL (electrical double layer) thickness and zeta potential ratio on velocity profile and temperature profiles are computed. The effects of Brinkman number (viscous heating parameter) and Joule (electrical field heating) parameter on nano-particle concentration profiles are also simulated. The micro-channel curvature effects on the nanofluid flow characteristics and thermal characteristics are also computed. Furthermore, streamline patterns, temperature contours, nano-particles concentration contours and entropy generation rate contours are plotted for various curvature parameters. Results indicate that the curvature of the channel and electro-osmotic body force influence strongly the sources of entropy generation rate. The study finds applications in bio-inspired electro-osmotic nanofluid pumping in microscale energy applications.     

Entropy generation and MHD natural convection of a nanofluid in an inclined square porous cavity: Effects of a heat sink and source size and location

The effects of a heat sink and the source size and location on the entropy generation, MHD natural convection flow and heat transfer in an inclined porous enclosure filled with a Cu-water nanofluid are investigated numerically. A uniform heat source is located in a part of the bottom wall, and a part of the upper wall of the enclosure is maintained at a cooled temperature, while the remaining parts of these two walls are thermally insulated. Both the left and right walls of the enclosure are considered to be adiabatic. The thermal conductivity and the dynamic viscosity of the nanofluid are represented by different verified experimental correlations that are suitable for each type of nanoparticle. The finite difference methodology is used to solve the dimensionless partial differential equations governing the problem. A comparison with previously published works is performed, and the results show a very good agreement. The results indicate that the Nusselt number decreases via increasing the nanofluid volume fraction as well as the Hartmann number. The best location and size of the heat sink and the heat source considering the thermal performance criteria and magnetic effects are found to be D?=?0.7 and B?=?0.2. The entropy generation, thermal performance criteria and the natural heat transfer of the nanofluid for different sizes and locations of the heat sink and source and for various volume fractions of nanoparticles are also investigated and discussed.     

Analytical Analysis of Heat Transfer and Entropy Generation in a Tube Filled with Double-Layer Porous Media

The heat transfer and entropy generation in a tube filled with double-layer porous media are analytically investigated. The wall of the tube is subjected to a constant heat flux. The Darcy-Brinkman model is utilized to describe the fluid flow, and the local thermal non-equilibrium model is employed to establish the energy equations. The solutions of the temperature and velocity distributions are analytically derived and validated in limiting case. The analytical solutions of the local and total entropy generation, as well as the Nusselt number, are further derived to analyze the performance of heat transfer and irreversibility of the tube. The influences of the Darcy number, the Biot number, the dimensionless interfacial radius, and the thermal conductivity ratio, on flow and heat transfer are discussed. The results indicate, for the first time, that the Nusselt number for the tube filled with double-layer porous media can be larger than that for the tube filled with single layer porous medium, while the total entropy generation rate for the tube filled with double-layer porous media can be less than that for the tube filled with single layer porous medium. And the dimensionless interfacial radius corresponding to the maximum value of the Nusselt number is different from that corresponding to the minimum value of the total entropy generation rate.     

Numerical Study of Unsteady MHD Flow and Entropy Generation in a Rotating Permeable Channel with Slip and Hall Effects

This article investigates an unbiased analysis for the unsteady two-dimensional laminar flow of an incompressible, electrically and thermally conducting fluid across the space separated by two infinite rotating permeable walls.The influence of entropy generation, Hall and slip effects are considered within the flow analysis. The problem is modeled based on valid physical arguments and the unsteady system of dimensionless PDEs (partial differential equations) are solved with the help of Finite Difference Scheme. In the presence of pertinent parameters, the precise movement of the flow in terms of velocity, temperature, entropy generation rate, and Bejan numbers are presented graphically, which are parabolic in nature. Streamline profiles are also presented, which exemplify the accurate movement of the flow. The current study is one of the infrequent contributions to the existing literature as previous studies have not attempted to solve the system of high order non-linear PDEs for the unsteady flow with entropy generation and Hall effects in a permeable rotating channel. It is expected that the current analysis would provide a platform for solving the system of nonlinear PDEs of the other unexplored models that are associated to the two-dimensional unsteady flow in a rotating channel.     

Mixed convection and entropy generation in a square cavity using nanofluids

In this work, two-dimensional mixed convection and entropy generation of water-(Cu, Ag, Al₂O₃, and TiO₂) nanofluids in a square lid-driven cavity containing two heat sources, have been numerically investigated. The upper lid and bottom wall of the cavity are maintained at a cold temperature T_C, respectively. The governing equations along with boundary conditions are solved using the finite volume method. Comparisons with the previous results were performed and found to be in excellent agreement. The effects of the solid volume fraction (0≤φ≤0.10), Rayleigh (10³≤Ra≤10⁵) and Reynolds (1≤Re≤500) numbers, and different types of nanofluids on the total entropy generation S_t and on entropy generation due to heat transfer S_h are presented and discussed. Moreover, the heat sources positions have an effect on the total entropy generation and Bejan number. It was found that S_t and S_h decrease with increase of φ, Ra, and Re.     

Analyses of the endoreversible Carnot cycle with entropy theory and entransy theory

The endoreversible Carnot cycle is analyzed based on the concepts of entropy generation, entropy generation number, entransy loss, and entransy loss coefficient. The relationships of the cycle output power and heat-work conversion efficiency with these parameters are discussed. For the numerical examples discussed, the preconditions of the application for these concepts are derived. When the inlet temperatures and heat capacity flow rates of hot streams and environment temperature are prescribed, the results show that the concepts of entropy generation and entransy loss are applicable. However, in the presence of various inlet temperatures of streams, larger entransy loss rate still leads to larger output power, while smaller entropy generation rate does not. When the heat capacity flow rates of hot streams are various, neither larger entransy loss rate nor smaller entropy generation rate always leads to larger output power. Larger entransy loss coefficient always leads to larger heat-work conversion efficiency for the cases discussed, while smaller entropy generation number does not always.     

吸收式制冷循环系统的热力学分析

从热力学观点讨论了工作温度对于制冷循环系统性能的影响。分析了与循环时间有关的温度效率和熵产数。对于一个相对较短的循环时间,吸收/解吸收热量转换器的温度效率在200秒后可以达到92%。熵产数Ns由在一个循环系统内生成的不可逆性参数和热量转换器流体有效性参数之间的比率决定。结果显示,在使用一个30℃冷源的情况下高级吸收式循环系统的熵产数Ns在热水温度是45℃至55℃之间时是相对较小的,而对于传统循环,在使用相同冷源温度的情况下,热水温度在65℃到75℃之间时,Ns是相对较小的。