The aqueous cationic system sodium undecenoate-dodecyltrimethylammonium bromide at low concentration

The aqueous sodium undecenoate (SUD) –dodecyltrimethylammonium bromide (DTAB) catanionic system was studied at low concentration. The system did not precipitate, even at a 1:1 SUD:DTAB proportion, but showed the formation of a coacervate in a range of surfactant mixture compositions. Micelles have a preferential composition of 0.37 mole fraction of SUD. This behavior is attributed to the presence of the double bond at the distal extreme of the SUD molecule, which can form hydrogen bonds with water. Consequently, the –CH=CH₂ group is situated at the interface between the hydrocarbon micelle core and water, reducing the interfacial free energy. Structural computations demonstrate that the mentioned SUD proportion produces complete coverage of the micelle surface by the double bonds.     

Research of Foam Performance of 3-Dodecyloxy-2-hydroxypropyl Trimethylammonium Bromide and Its Complex Systems

Foam performance of 3-dodecyloxy-2-hydroxypropyl trimethylammonium bromide (DOHTAB) has been determined in the presence of different relative amounts of polymer and sodium bromide. The experimental results show that the foaming ability of the mixed systems of DOHTAB/polymer and DOHTAB/sodium bromide is stronger than that of the surfactant solutions in the absence of polymer and sodium bromide. Both foaming efficiency and foam stability of the surfactant solutions are evidently enhanced with increasing relative amounts of polymer and sodium bromide. The foamability of the mixture of DOHTAB/NaBr is stronger than that of the mixed system of DOHTAB/PEG or DOHTAB/PVP when the percentage composition is the same, whereas the foam stability of the former is weaker than that of the latter. The foamability and foam stability of the DOHTAB/PEG system were both better than those of the mixed system of DOHTAB/PVP at the same concentration.     

Unusual volumetric and hydration behavior of the catanionic system sodium undecenoate: sodecyltrimethylammonium bromide

Following the studies on the effect of double bonds in the surfactant hydrophobic tail on the formation of mixed surfactant aggregates, we studied the viscosity and density of the system Sodium 10-undecenoate (SUD)–decyltrimethylammonium bromide (DTAB)–water. We found that the partial molar volume (pmv) and intrinsic viscosity of both, micellised and unmicellised mixtures, are non-ideal, dependent on the mixture composition and related to structural changes in micelles. These phenomena are caused by the presence of the double bond at the distal extreme of the SUD molecule, which has some affinity with water by formation of hydrogen bonds. In particular, as far as we know, this is the first report on non-ideal behavior of the pmv in mixed micelles.     

Effect of double bonds in the formation of sodium dodecanoate and sodium 10-undecenoate mixed micelles in water

The micellization of an aqueous mixture of sodium dodecanoate (SDD) and sodium 10-undecenoate (SUD) was studied with the theory of mixed micellization. A strong nonideality was found, with a preferential composition of mixed micelles. This phenomenon was interpreted on the basis of the interaction between the vinyl group and water by hydrogen bonding. The importance of the aliphatic pi electrons and water was stated.     

The Viscous Properties of Anionic/Cationic and Cationic/Nonionic Mixed Surfactant Systems

The behavior of mixed cationic/anionic and cationic/nonionic surfactants solutions have been studied by viscosimetry. The systems studied were sodium dodecyl sulfate (SDS)/cetyltrimethylammonium bromide (CTAB) and CTAB/Brij (polyoxyethylene lauryl ether, n = 10 and 23) in aqueous and sodium chloride solutions. The relative viscosity of single nonionic surfactant solutions is larger than that of SDS or CTAB solutions. It increases with the number of ethylene oxide groups. In the mixed systems, viscosity deviates from ideal behavior. The deviation results from electrostatic interactions. The surfactant mixture composition affects the self-assembled microstructure and rheology. A new mixed system that forms clear micellar solution above CMC was detected. In CTAB/Brij systems, the experimental data also deviate from ideal behavior due to mixed micelle formation and electroviscous effect. This effect is less pronounced than that of SDS/CTAB system and could be suppressed by adding an electrolyte (NaCl).     

Mixed micellization and interfacial properties of dodecyltrimethylammonium bromide and tetraethyleneglycol mono-n-dodecyl ether in absence and presence of sodium propionate

Mixed micelle formation and interfacial properties of aqueous binary surfactant combinations of dodecyltrimethylammonium bromide (C12TAB) and tetraethyleneglycol mono-n-dodecyl ether (C12E4) at 30 degrees C in absence and presence of sodium propionate (NaPr) have been investigated. The critical micelle concentration, aggregation number, micropolarity and interfacial adsorption have been quantitatively estimated by surface tension and steady-state fluorescence measurements. The micellar and adsorption characteristics like composition, activity coefficients and mutual interaction parameters have been estimated following different theoretical treatments like that of Clint, Rubingh, Rodenas, Maeda, Blankschtein and Rosen. The analysis reveals very small mole fraction of cationic surfactant in both the mixed micelles and mixed monolayer inspite of synergism. Blankschtein's model predicts a continuous decrease in synergism due to the salt effect of NaPr; Rubingh's approach, on the contrary, indicates an increase in it above 30 mM of NaPr concentration. Aggregation number variation with NaPr indicates the same. Mixed monolayer shows better synergism compared to that in mixed micelles which increases with the addition of sodium propionate above 30 mM concentration.     

Temperature-dependent vesicle formation of aqueous solutions of mixed cationic and anionic surfactants

The phase behavior of aqueous solutions of mixed cetyltrimethylammonium bromide (CTAB) and sodium octyl sulfate (SOS) was examined at different temperatures (20, 30, 40, and 50 degrees C). While stable vesicles were formed in a narrow composition range on the SOS-rich side at 20 degrees C, the range widened remarkably when the temperature was raised to 30 degrees C. Thus, the vesicle region extended to cover almost the entire composition range, CTAB:SOS = 0.5:9.5-5.0:5.0, at the total surfactant concentrations of 50-70 mM on the SOS-rich side. To analyze the temperature dependence of this phase behavior of the mixed surfactant system, DSC and fluorescence polarization measurements were performed on the system. The experimental findings obtained revealed that pseudo-double-tailed CTAB/SOS complex, the major component of the bimolecular membrane formed by the surfactant mixture, undergoes a gel (Lbeta)-liquid crystal (Lalpha) phase transition at about 26 degrees C. This phenomenon was interpreted as showing that the bimolecular membrane has no curvature and is rigid and easy to precipitate at temperatures below the phase transition point, whereas it has a curvature and is loose enough to disperse in the solution as vesicles at temperatures above the phase transition point. Vesicles formed by the anionic/cationic surfactant complex were then stable at temperatures above the phase transition temperature of the complex.     

Enthalpy and free energy of solubilization for 1-pentanol in anionic + cationic and anionic + nonionic surfactant mixtures

The standard enthalpy of solubilization as well as the partition coefficient of 1-Pentanol between micelles and water have been determined in the whole composition range of two binary surfactant systems from microcalorimetry experiments. The free energy results compare favorably with partition coefficients deduced from a head-space gas-chromatographic technique. It is shown that the surfactant mixing of sodium decylsulfate+decyltrimethylammonium bromide (system I) or sodium dodecylsulfate+dodecylpolyoxyethylene(23) (system II) is unfavorable to micellar solubilization. The solubilization of 1-pentanol is a highly endothermic process for system (I) and only slightly endothermic for system (II). The regular solution approximation predicts qualitatively the standard free energy as well as the standard enthalpy data. These results illustrate a discussion on the limits as well as the usefulness of the regular solution approach as applied to these three-component systems using available solubilization results from the literature for hydrophobic solutes in binary micellar surfactant solutions.     

The Distribution of mixtures of dodecyl ether of poly(23)ethylene glycol with sodium dodecyl sulfate and dodecyltrimethylammonium bromide in the water/octane system

The scintillation phase and tensiometry methods were used to study the mutual influence of dodecyl ether of poly(23)ethylene glycol (Brij-35) with sodium dodecyl sulfate and Brij-35 with dodecyltrimethylammonium bromide on the distribution in the water/octane system and adsorption at the liquid/liquid interface. The composition of mixed adsorption layers was determined and interaction parameters between molecules were calculated according to the Rosen model.     

Surface properties of mixtures of surface-active sugar derivatives with ionic surfactants: theoretical and experimental investigations

Surface properties of systems that are mixtures of ionic surfactants and sugar derivatives-anionic surfactant sodium dodecyl sulfate and n-dodecyl-beta-D-maltoside (SDS/DM) and cationic surfactant dodecyltrimethylammonium bromide and n-dodecyl-beta-D-glucoside (DTABr/DG)-were investigated. The experimental results obtained from measurements of surface tension of mixtures with various ratio of ionic to nonionic components were analyzed by two independent theories. First is Motomura theory, derived from the Gibbs-Duhem equation, allowing for indirect evaluation of the composition of mixed monolayers and the Gibbs energies of adsorption, corresponding to mutual interaction between surfactants in mixed adsorbed film. As second theory we used our newly developed theoretical model of adsorption of ionic-nonionic surfactant mixtures. Using this approach, we were able to describe the experimental surface tension isotherms for mixtures of surface-active sugar derivatives and ionic surfactants. We obtained a good agreement with experimental data using the same set of model parameters for a whole range of studied compositions of a given surfactant mixture. The values of surface excess calculated from both theories agreed with each other with a reasonable accuracy. However, the newly developed model of adsorption of ionic-nonionic surfactant mixtures has the advantage of straightforward determination of surface layer composition. By the solution of equations of adsorption, one can obtain directly the values of surface excess of all components (surfactant ions, counterions, and nonionic surfactants molecules), which are present in the investigated system.     

Synthesis of highly-ordered mesoporous silica particles using mixed cationic and anionic surfactants as templates

We applied a molecular assembly formed in an aqueous surfactant mixture of cationic cetyltrimethylammonium bromide (CTAB) and anionic sodium octylsulfate (SOS) as templates of mesoporous silica materials. The hexagonal pore size can be controlled between 3.22 and 3.66 nm with the mixed surfactant system. In addition, we could observe the lamellar structure of the mixed surfactants with precursor molecules, which strongly shows the possibility of precise control of both the pore size and the structure of pores by changing the mixing ratio of surfactants. Moreover, use of the cationic surfactant having longer hydrophobic chain like stearyltrimethylammonium bromide (STAB) caused the increase in d(100) space and shifted the point of phase transition from hexagonal phase to lamellar phase to lower concentration of SOS.     

表面活性剂分子间弱相互作用的直接能量表征——高灵敏等温滴定量热法

分子间弱相互作用热力学研究的直接实验方法就是利用量热手段测定相互作用的能量参数. 本文对TAM III-ITC 纳焦级量热计进行了电标定实验和标准反应热测量, 结果显示本量热计的精密度为±0.09%; 量热用基准物质三羟甲基氨基甲烷(Tris)与盐酸的反应热((-47.48±0.12) kJ·mol^-1)与文献值一致. 采用此量热计,对典型的头-尾链型阳离子表面活性剂十二烷基三甲基溴化铵(DTAB)测量得到了与文献报导值很好吻合的临界胶束浓度(cmc)和胶束化焓, 而且对具有亲水-疏水面式刚性结构的生物表面活性剂胆酸钠(NaC)也获得了可靠的结果. 进一步地, 对于相反电荷的混合表面活性剂体系(DTAB/NaC), 分别研究了在富NaC区和富DTAB区体系混合胶束的形成. 结果说明DTAB/NaC混合表面活性剂体系在富NaC区有较强的协同效应, 而在富DTAB区的协同效应较弱. 本文结合电导率测定结果, 对DTAB/NaC混合体系在水溶液中的分子自组装热力学行为进行了有价值的讨论.     

Effect of alkyl chain asymmetry on catanionic mixtures of hydrogenated and fluorinated surfactants

In this work we studied and compared the physicochemical properties of the catanionic mixtures cetyltrimethyl-ammonium bromide–sodium dodecanoate, cetyltrimethyl-ammonium bromide–sodium perfluorodacanoate, octyltrimethylammonium bromide–sodium perfluorodacanoate and cetyltrimethyl-ammonium bromide–sodium octanoate by a combination of rheological, transmission electron microscopy (TEM) and polarized optical microscopy measurements. The binary mixtures of the surfactants have been analyzed at different mixed ratios and total concentration of the mixture. Mixtures containing a perfluorinated surfactant are able to form lamellar liquid crystals and stable spontaneous vesicles. Meanwhile, system containing just hydrogenated surfactants form hexagonal phases or they are arranged in elongated aggregates.     

正、负离子表面活性剂混合体系溶致液晶生成的相行为

研究了烷基(C8,C12,C14)三甲基溴化铵、烷基(C12,C14)溴化吡啶与烷基(C8,C12)硫酸钠混合体系溶致液晶形成的条件与结构的变化.在高浓度的水溶液中,随着正、负离子表面活性剂摩尔比接近于1,液晶结构由六角相过渡为层状相.表面活性剂非极性链长改变,对相行为影响显著,短碳链的正、负离子表面活性剂混合体系,在等摩尔比时,体系为层状液晶或立方液晶为主,夹杂少许沉淀.随碳链增长,两类表面活性剂间的静电吸引效果表现为生成沉淀的摩尔比例范围变宽,沉淀量增多,共存的液晶相减少,甚至消失.若只改变正离子的极性头基,季胺盐比吡啶盐与烷基硫酸盐的作用要强,形成不溶物的混合摩尔比例范围更宽.     

两种有机磺酸配合物的合成、表征及与DNA键合性质

合成了2个新型有机磺酸配合物,[Cd(phen)₂(ans)₂]·H₂O (1)和[Pb(phen)₂(ans)₂]·H₂O (2) (phen=1,10-邻菲咯啉,ans=4-氨基-1-萘磺酸根),通过元素分析、红外光谱等对配合物进了表征,用X-射线单晶衍射方法测定了配合物的单晶结构。应用紫外-可见吸收光谱、荧光光谱及粘度测定方法研究了配合物与ctDNA的作用,发现2个配合物均以插入和氢键两种模式与ctDNA发生作用。     

Structure and physico-chemical properties in mixed aqueous solution of sodium alkvicarboxylate-alkyltrimethylammonium bromide

The physico-chemical properties of organized assemblies (micelle or vesicle ) from sodium alkylcarboxylate - alkyltrimethyl -ammonium bromide mixture have been investigated systematically. In different mixed cationic-anionic surfactant systems, micelles and vesicles can coexist or be transformed into each other on different conditions. The experimental results are explained prelimilarily from the viewpoint of molecular packing geometry. The solubilization of organic compound in the mixed surfactant system was also studied in detail.     

Effects of interactions on the formation of mixed micelles of 1,2-diheptanoyl-sn-glycero-3-phosphocholine with sodium dodecyl sulfate and dodecyltrimethylammonium bromide

Mixed micelles of the phospholipid 1,2-diheptanoyl-sn-glycero-3-phosphocholine (DHPC) with sodium dodecyl sulfate (SDS) or dodecyltrimethylammonium bromide (DTAB) in aqueous solutions and the effects of interactions between the components were studied by fluorescence and NMR measurements. The regular solution theory (RST) was applied to analyze the experimental critical micelle concentration values determined from the fluorescence spectra of pyrene in the mixed micelles. Negative values for the interaction parameter (beta12) were obtained for both DHPC + SDS and DHPC + DTAB mixtures, with the value being more negative in the former case. The negative beta12 values for the two systems imply that the interaction between the phospholipid and the two ionic surfactants is attractive in nature, being more intense in the case of DHPC + SDS. The interaction parameter, beta12, varies with composition of the mixtures indicating changes in packing. The proton NMR shifts are quite different for the two systems and also vary with composition. An interpretation of these experimentally determined chemical shifts in terms of the degree of compactness attributed to electrostatic and steric interactions in the mixed micelle supports the conclusions derived from the fluorescence cmc experiments.     

Calorimetric study on the temperature dependence of the formation of mixed ionic/nonionic micelles

The differential excess enthalpy of mixed micelle formation was measured at different temperatures by mixing nonionic hexa(ethylene glycol) mono n-dodecyl ether with anionic sodium dodecyl sulfate or cationic dodecylpyridinium chloride. The experimental data were obtained calorimetrically by titrating a concentrated surfactant solution into a micellar solution of nonionic surfactant. The composition and the size of the mixed nonionic/ionic micelles at different surfactant concentrations were also determined. Pronounced differences in both composition and excess enthalpy were found between the anionic and the cationic mixed system. For both systems, the excess enthalpies become more exothermic with increasing temperature, but for the anionic mixed system an additional exothermic contribution was found which was much less temperature dependent. Temperature dependence of the excess enthalpy was attributed to the effect of the ionic headgroup on the hydration of the ethylene oxide (EO) groups in the mixed corona. Ionic headgroups located in the ethylene oxide layer cause the dehydration of the EO chains resulting in an additional hydrophobic contribution to the enthalpy of mixing. A high affinity of sodium dodecyl sulfate for nonionic micelles and an extra exothermic and less temperature dependent contribution to the excess enthalpy found for the SDS-C(12)E(6) system might be attributed to specific interactions (hydrogen bonds) between the sulfate headgroup and the partly dehydrated EO chain.     

Effect of preferential adsorption on the synergism of a homologous cationic surfactant mixture

To evaluate the effect of preferential surface adsorption of bromide ions on the synergism of homologous cationic surfactant mixtures reported previously, the surface tension of the aqueous solutions of the hexadecyltrimethylammonium chloride (HTAC)-dodecyltrimethylammonium bromide (DTAB) system was measured as a function of the total molality of surfactants and the relative proportion of DTAB at 298.15 +/- 0.05 K under atmospheric pressure. The excess Gibbs energies calculated from them were -2.6 kJ mol(-)(1) in the mixed adsorbed film and -2.0 kJ mol(-)(1) in the mixed micelle, respectively. A useful analytical procedure to evaluate the composition of individual ions (hexadecyltrimethylammonium, dodecyltrimethylammonium, chloride, and bromide ions) in the adsorbed film and micelle was developed and applied.