声纳导流罩吸声障板声学特性的研究

本文研究内容属于舰艇声兼容性技术研究的一部分。应用声学软件SYSNOISE计算了,声纳定向发射时某试验用声纳导流罩及尾部吸声障板的声场特性,同时进行相同工况的水下模型试验。计算结果与试验结果吻合良好,说明应用声学软件对声纳声场进行计算是一种可行的方法,有可能推广至其他的水下模型的声场计算。结果数据反映了吸声障板对声纳定向发射时声场的影响,为舰艇总体声纳导流罩内吸声障板的结构设计、声兼容设计提供依据。     

船舶球鼻艏导流罩声障板参数对艉部声场的影响

本文研究了声障板相关参数对球鼻艏导流罩内声纳艉部声场的影响。对某舰缩比模型罩建立了有限元模型，然后运用有限元法声学分析软件，计算了某些频率下声源定向发射的声衰减特性和声场特性。计算结果与已进行的模型罩消声水池的试验结果吻合良好。     

面向微穿孔板吸声结构和吸声特性混合设计的软件平台

微穿孔板吸声结构是由微穿孔板与板后空腔组成的共振吸声结构,被认为是继多孔吸声材料之后发展起来的最有吸引力的吸声结构,其吸声特性与结构参数孔径d、板厚t、孔距b及空腔深度D有关,如何按需设计一个有效的微穿孔板吸声结构已成为目前研究的热点。本文从微穿孔板吸声结构和吸声特性混合设计的角度出发,使用面向对象的编程语言C++开发了微穿孔板吸声结构设计平台。与以往设计方法不同,本文开发的软件平台综合考虑了结构参数和吸声特性参数两方面的限制,根据实际应用要求平衡微穿孔板吸声结构的最大吸声系数与吸声带宽之间的制约关系,并以饱满的吸声曲线为目标,提供满足混合设计要求的优化结构参数。     

降低加肋双层圆柱壳辐射噪声线谱的结构声学设计

为降低双层圆柱壳辐射噪声线谱,从控制内壳振动响应和衰减壳间振动传递率进行结构声学设计。采用机械阻抗理论分析了环肋圆柱壳模态响应控制机理;由环肋振动方程推导分析了环肋径向机械阻抗特性;基于阻抗失配、波形转换原理提出一种阻抗加强环肋,分析了振动波阻抑特性;利用阻尼减振技术,综合考虑肋板的刚度、阻尼特性,设计了金属橡胶层叠肋板;结合数值计算实例,分析了设计双层壳模型的声辐射性能。结果表明:设计的双层加肋圆柱壳结构能有效降低辐射噪声线谱,在分析频段内辐射声压线谱平均降低约6.6 dB。研究结果对研制低噪声水下航行器具有良好的工程价值和应用前景。     

激发圆形管道内多阶声模态的扬声器阵列控制方法

声模态发生器是通过控制扬声器阵列在管道内激发声模态波的一种装置。为了解决在管道内同时激发多个声模态的问题,研究了激发圆形管道内多阶声模态的扬声器阵列控制方法。采用轴向多圈布置的声源阵列,并调节各个声源的幅值和相位,实现同时激发包括径向声模态在内的多个声模态。同时考虑声源的周向位置和轴向位置信息,建立各个声源与多个目标模态系数之间的线性关系,运用最小二乘法求解得到激发目标多模态所需各个声源的复强度（包括幅值和相位）,所研制的高阶模态发生器以计算的声源复强度为输入量,采用数字信号系统控制扬声器输出的幅值和相位,用于实现管道内声源激发,该模态激发过程无需针对特定模态优化声源的位置。实验结果表明,所研制的模态发生器可精确激发单个或多个声模态,且目标模态系数信噪比几乎都大于10 dB。     

Acoustic field evaluation of asphalt mixtures with crumb rubber

The aim of this study is to characterize the acoustical behavior of bituminous mixtures fabricated with recycled rubber crumb. Acoustic field measurements of the tire/pavement interaction in close proximity to the contact patch were carried out with a trailer with a protective chamber (TiresonicMk4-LA²IC). The survey was conducted on a test track with several experimental sections paved with a gap-graded mixture. Different methods of incorporating crumb rubber in the mixture were used: (i) into binder and (ii) with the aggregate materials. Close proximity sound levels are assigned to the gap-graded mixtures containing rubber and compared to that of a reference mixture without rubber. It is shown that asphalt mixtures fabricated with the addition of crumb rubber to the aggregate material (dry process) managed to reduce the noise from the tire/pavement interaction up to 2 dB(A).     

利用优化算法分析分层结构障板的声学性能

根据水平分层介质的物理模型,分别以追求单一频率条件和给定频段条件下反射系数最小为目标,利用遗传算法对不同组合方式的水平分层介质的参数进行了优化。利用遗传算法的随机搜索特性,得到多组不同的物理参数。利用这些参数,对反射系数与结构及材料参数的依赖关系进行了分析。计算了分层结构中每一层的吸收贡献率,提出了阻抗比系数的概念。通过对比,分析了在不同频率条件下,不同水平分层结构对垂直入射平面波的吸收机理。对利用水平分层复合结构材料制作吸声障板可能达到的指标做了进一步的分析。结果表明,为得到较大的吸收系数,不同层间的阻抗比系数必须保持一定关系。     

Inelastic interactions of electrons with cylindrical interfaces

A theory was developed to deal with inelastic interactions for an electron moving parallel to the axis of a cylindrical structure. Formulas for the differential inverse inelastic mean free path (DIIMFP) and the total inverse inelastic mean free path (IIMFP) were derived using dielectric response theory. A sum-rule-constrained extended Drude dielectric function with spatial dispersion was applied to calculate DIIMFPs and IIMFPs for a solid wire and a cavity in solid. The calculated results showed that surface excitations occurred as the electron moved near the boundary either inside or outside the solid, whereas volume excitations arose only for electron moving inside the solid. It was found that the probability for surface excitations increases and that for volume excitations decreases for an electron moving close to the surface. Near the surface, the decrease in volume excitations is compensated by the increase in surface excitations. For a cavity in solid, the IIMFP inside the solid can be approximated by a constant value equal to the IIMFP for the infinite solid, except in the immediate vicinity of the cavity boundary.     

Acoustic performance of a duct loaded with identical resonators

This paper presents a theoretical study of a duct loaded with identical side-branch resonators. The Bloch wave theory and the transfer matrix method are used to investigate wave propagation in the duct. It is found that this duct-resonator system has a unique attenuation characteristic brought about by structural periodicity. Three types of stop-bands are discussed and their bandwidths are predicted. All of the results predicted by the theory fit well with a computer simulation using a three-dimensional finite element method. Compared to a single resonator, this structure may have a potential application in broadband noise control.     

Dynamic magnetic properties of the kinetic cylindrical Ising nanotube

The nature (time variation) of response magnetizations m(wt) of the kinetic cylindrical Ising nanotube in the presence of a periodically varying external magnetic field h(wt) is studied by employing the effective-field theory (EFT) with correlations as well as the Glauber-type stochastic dynamics. We have determined the time variations of m(wt) and h(wt) for various temperatures, and investigated the dynamic magnetic hysteresis behavior. Temperature dependence of the dynamic magnetizations, hysteresis loop areas and correlations are investigated in order to characterize the nature (first- or second-order) of the dynamic transitions as well as to obtain the dynamic phase transition temperatures. We also present the dynamic phase diagrams in the three different planes and compare the results of the equilibrium and nonequilibrium states. The phase diagrams exhibit dynamic tricritical, isolated critical, multicritical and triple points. The results are in good agreement with some experimental and theoretical results.     

大视场空间相机轻型遮光罩的研制

空间相机遮光罩既能遮挡杂光进入相机镜头,又可利用遮光罩长度和遮光罩内的光栅及表面材料特性,吸收已进入遮光罩的杂散光,能够保证相机获得较高的信噪比。具有优良性能指标的碳纤维复合材料应用于空间相机中能够满足空间相机的结构设计指标,并能大大降低相机的重量。针对某空间相机进行了遮光罩的设计,通过利用有限元模拟仿真分析与试验验证相结合的方法,验证了碳纤维作为遮光罩材料的可行性和是否能够提高光学系统的信噪比。结果表明,碳纤维复合材料应用于空间相机遮光罩的设计是完全可行的。     

Thermal effect on the acoustic behavior of an axisymmetric lined duct

This paper deals with the effect of the temperature and the frequency on the acoustic behavior of lined duct partially treated with usual material used in acoustic insulation.First, the effect of frequencies and temperature on the acoustic impedance of usual materials used in lined duct such as glass or rock wools in order to reduce acoustic level is investigated.Secondly, the variational formulation of the acoustic duct problem taking into account velocity and temperature effects is established. Then, a numerical model is derived which permits to compute the reflection and the transmission coefficients of such duct for different temperatures and several flow velocities. The acoustic power attenuation is then computed from these coefficients and the effect of the temperature and flow velocities on this energetic quantity is evaluated.The numerical results are obtained for three configurations of a lined duct treated for different temperature ranges and several velocities. Numerical coefficients of transmission and reflection as well as the acoustic power attenuation show the relative influence of temperature.