Mid-infrared upconversion spectroscopy based on a Yb:fiber femtosecond laser

We present a system for molecular spectroscopy using a broadband mid-infrared laser with near-infrared detection. Difference frequency generation of a Yb:fiber femtosecond laser produced a mid-infrared (MIR) source tunable from 2100–3700 cm⁻¹ (2.7–4.7 μm) with average power up to 40 mW. The MIR spectrum was upconverted to near-infrared wavelengths for broadband detection using a two-dimensional dispersion imaging technique. Absorption measurements were performed over bandwidths of 240 cm⁻¹ (7.2 THz) with 0.048 cm⁻¹ (1.4 GHz) resolution, and absolute frequency scale uncertainty was better than 0.005 cm⁻¹ (150 MHz). The minimum detectable absorption coefficient per spectral element was determined to be 4.4×10⁻⁷ cm⁻¹ from measurements in low pressure CH₄, leading to a projected detection limit of 2 parts-per-billion of methane in pure nitrogen. In a natural atmospheric sample, the methane detection limit was found to be 30 parts-per-billion. The spectral range, resolution, and frequency accuracy of this system show promise for determination of trace concentrations in gas mixtures containing both narrow and broad overlapping spectral features, and we demonstrate this in measurements of air and solvent samples.     

Analysis of trace impurities in semiconductor gas via cavity-enhanced direct frequency comb spectroscopy

Cavity-enhanced direct frequency comb spectroscopy (CE-DFCS) has demonstrated powerful potential for trace-gas detection based on its unique combination of high bandwidth, rapid data acquisition, high sensitivity, and high resolution, which is unavailable with conventional systems. However, previous demonstrations have been limited to proof-of-principle experiments or studies of fundamental laboratory science. Here, we present the development of CE-DFCS towards an industrial application—measuring impurities in arsine, an important process gas used in III–V semiconductor compound manufacturing. A strongly absorbing background gas with an extremely complex, congested, and broadband spectrum renders trace detection exceptionally difficult, but the capabilities of CE-DFCS overcome this challenge and make it possible to identify and quantify multiple spectral lines associated with water impurities. Further, frequency combs allow easy access to new spectral regions via efficient nonlinear optical processes. Here, we demonstrate detection of multiple potential impurities across 1.75–1.95 μm (5710–5130 cm⁻¹), with a single-channel detection sensitivity (simultaneously over 2000 channels) of ∼4×10⁻⁸ cm⁻¹ Hz^−1/2 in nitrogen and, specifically, an absorption sensitivity of ∼4×10⁻⁷ cm⁻¹ Hz^−1/2 for trace water doped in arsine.     

Femtosecond OPO based on LBO pumped by a frequency-doubled Yb-fiber laser-amplifier system for CARS spectroscopy

We present detailed investigations of a femtosecond green-pumped optical parametric oscillator (OPO) based on lithium triborate. As pump source, a frequency-doubled Yb-fiber laser-amplifier system is used. The OPO generates signal pulses tunable over a spectral range from 780 to 940 nm and idler pulses tunable from 1630 to 1190 nm. More than 250 mW are generated in the signal beam and more than 300 mW in the idler beam. Without dispersion compensation chirped signal pulses with a pulse duration between 100 and 250 fs are measured. Using this system for coherent anti-Stokes Raman scattering spectroscopy, vibrational resonances between 1110 and 6760 cm⁻¹ can be excited. Due to the chirped pulses, a spectral resolution of 100 cm⁻¹ is achieved, which is 2.5 times higher compared to an excitation with time-bandwidth limited pulses.     

Synthetic spectrum of the stratosphere in the submillimeter region

A line-by-line and layer-by-layer optimized method is used for the fast computation of new high resolution spectra in the submillimeter region for the stratospheric medium. The results are shown as synthetic spectra between 10 and 40 cm⁻¹ and the presence of lines of minor gaseous constituents in the stratospheric medium is indexed. The purpose of the calculations is to determine better the spectral emission (better than 1 %) with a minimum computation time (less than 1’/cm⁻¹). The high resolution spectra (5.10⁻⁴ cm⁻¹) show excellent submillimeter emission lines; this opens a wide field of investigation for stratospherical studies.     

Polarized Raman spectroscopy study of NiSi film grown on Si(001) substrate

We report on the growth of NiSi film on Si(001) substrate with an orientation of NiSi[200]//Si[001]. Polarized Raman spectroscopy was used to assign the symmetry of the NiSi Raman peaks. Raman peaks at 213 cm⁻¹, 295 cm⁻¹, and 367 cm⁻¹ are assigned to be A _g symmetry and peaks at 196 cm⁻¹, and 254 cm⁻¹ are B _3g symmetry.     

Tunable diode laser spectroscopy of ethylene oxide near 1693 nm

We describe the application of the vertical-cavity surface-emitting laser (VCSEL) to absorption spectroscopy of the ethylene oxide (EO) Q-branch near 1693 nm. The VCSEL was electrically scanned over spectral intervals of up to ∼13 cm⁻¹ at a 1 kHz repetition rate. A methane absorption line at 5903.3 cm⁻¹ and Fabry–Pérot etalon with a free spectral range of 0.4 cm⁻¹ were used to calibrate frequency scale. The EO was mixed with ambient air, and total gas pressure and mixing ratios were varied from a few mbar to 1 bar and from ∼10² to 10⁵ parts per million, respectively. A rapid roll off of EO absorbance at 5903.7 cm⁻¹ was observed at gas pressures below ∼0.5 bar. A linear dependence of EO peak absorbance on mixing ratio was found at a total gas pressure of 1 bar. We conclude that monolithic VCSELs operating near 1693 nm could be used in EO sensors with a detection limit in the ppb range.     

Synthesis and characterization of novel nano-size polyreactive yellow 107

The reactive yellow 107 was polymerized by chemical oxidation method using potassium persulfate. The polymer was characterized by UV-VIS and Fourier transform infrared spectroscopy (FTIR) spectral studies. The peaks at 2,922 and 2,852 cm⁻¹ in the FTIR spectrum of polyreactive yellow 107 are assigned to the symmetric and asymmetric stretching vibrations of CH₂. The peak observed at 1,583 cm⁻¹ for polyreactive yellow 107 may be assigned to the stretching vibration of C=O, N=N, and C=C, 1,347 cm⁻¹ stretching vibration of C–N. The stretching vibrations of sulfone and sulfonic acid of S=O groups show a strong broad peak at 1,091 and 1,051 cm⁻¹. The conductivity of the polymer was determined to be 5.57 × 10⁻⁵ S cm⁻¹. The solubility of the chemically polymerized powder was ascertained and polyreactive yellow 107 showed good solubility in N,N-dimethyl formamide and dimethyl sulfoxide. The X-ray diffraction studies revealed the formation of nano-sized (84 nm) crystalline polymer. Using X-ray diffraction, behavior strain and dislocation density was also calculated. Scanning electron microscope analysis showed uniform crystalline nature of the polymer (200 nm). The thermogravimetric analysis, differential thermal analysis, and differential scanning calorimetry studies revealed good thermal stability of the polymer.     

Telecom-grade fiber laser-based difference-frequency generation and ppb-level detection of benzene vapor in air around 3 μm

We report on the development of a field deployable compact laser instrument tunable over ∼232 cm⁻¹ from 3.16 to 3.41 μm (2932.5–3164.5 cm⁻¹) for chemical species monitoring at the ppb-level. The laser instrument is based on widely tunable continuous-wave difference-frequency generation (DFG), pumped by two telecom-grade fiber lasers. DFG power of ∼0.3 mW near 3.3 μm with a spectral purity of ∼3.3 MHz was achieved by using moderate pumping powers: 408 mW at 1062 nm and 636 mW at 1570 nm. Spectroscopic performance of the developed DFG-based instrument was evaluated with direct absorption spectra of ethylene at 3.23 μm (∼3094.31 cm⁻¹). Absorption spectra of vapor-phase benzene near 3.28 μm (∼3043.82 cm⁻¹) were recorded with Doppler-limited resolution. Line intensities of the most intense absorption lines of the ν ₁₂ band near 3043.8 cm⁻¹ were determined to support development of sensitive mid-infrared trace gas detection of benzene vapor in the atmosphere. Detection of benzene vapor in air at different concentration levels has been performed for the first time using multi-pass cell enhanced direct absorption spectroscopy at ∼3.28 μm with a minimum detectable concentration of 50 ppb (1σ).     

Compact fibre-based coherent anti-Stokes Raman scattering spectroscopy and interferometric coherent anti-Stokes Raman scattering from a single femtosecond fibre-laser oscillator

We demonstrate a new approach to CARS spectroscopy by efficiently synthesizing synchronized narrow-bandwidth (less than 10 cm⁻¹) pump and Stokes pulses (frequency difference continuously tunable upto ≈3000 cm⁻¹) based on spectral compression together with second harmonic generation (in periodically-poled nonlinear crystals) of femtosecond pulses emitted by a single compact Er-fibre oscillator. For a far better signal to non-resonant background contrast, interferometric CARS (I-CARS) is demonstrated and CARS signal enhancement upto three orders of magnitude is achieved by constructive interference with an auxiliary local oscillator at anti-Stokes field, also synthesized by spectral compression of pulses emitted from the same fibre oscillator.     

Chemical composition of surface-functionalized gold nanoparticles

The composition of surface-functionalized gold nanoparticles (diameter of the metallic core: 17–20 nm) was determined by elemental analysis (C, H, N, S, Au, Na) after preparation of a larger batch. Gold nanoparticles were prepared and functionalized with citrate according to the classical Turkevich method. The citrate-functionalized nanoparticles contained about 3.1 wt% of organic material (135 ng cm⁻² or 3.1 molecules nm⁻²). A partial exchange of citrate was accomplished by tris(sodium-m-sulfonato-phenyl)phosphine (TPPTS) which led to 2.1 wt% of citrate (90 ng cm⁻² or 2.1 molecules nm⁻²) and 1.4 wt% TPPTS (61 ng cm⁻² or 0.6 molecules nm⁻²). The citrate coating was quantitatively exchanged by poly(N-vinyl pyrrolidone) (PVP) after immersion in solutions with concentrations of 33, 66 and 128 mg L^-1, respectively, leading to contents of 4 to 6 wt% of PVP (171–271 ng cm⁻² or 9–15 PVP monomer units nm⁻²).     

Detection of <Emphasis Type="Italic">trans</Emphasis>-isomers of hydrocarbon residues of lipid molecules by IR absorption

IR spectroscopy is used for a comparative analysis of the trans-isomerization of double bonds in hydrocarbon residuals of lactic and hydrogenated lipids. The maximum of the absorption band of the trans-isomers for all the lipid samples is found to lie at 965 cm⁻¹. An absorption band at 970 cm⁻¹ is discovered in the spectra of the lactic lipids near the analytic band of the trans-isomers at 965 cm⁻¹. Based on a gaussian approximation for their absorption spectral bands, the trans-isomer content in the lactic lipid samples is 10–11%. The absorption by lipid molecules at 970 cm⁻¹ has to be taken into account when determining the trans-isomer content of fat and oil products. Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 76, No. 1, pp. 138–142, January–February, 2009.     

The Unusual Magnetic Resonance Properties of Trigonal Prismatic Tc and Re Complexes

The electron paramagnetic resonance (EPR) spectra of the trigonal prismatic complexes Tc(abt)₃, Tc(bdt)₃, Re(abt)₃ and Re(bdt)₃ (abt, O-aminobenzenethiol; bdt, benzene-1,2-dithiol) in dilute frozen solution are interpreted in terms of an axially symmetric spin Hamiltonian, with g values close to two, principal hyperfine couplings of |A ^Tc| ~ 5–12 × 10⁻⁴ cm⁻¹, nuclear quadrupole couplings of |P ^Tc| ~ 0.3–0.35 × 10⁻⁴ cm⁻¹ and the unusual values 5 × 10⁻⁴ cm⁻¹ ~ |A _zz ^Re| < |P ^Re| ~ |A _xx ^Re| ~ |A _yy ^Re| ~ 25 × 10⁻⁴ cm⁻¹. Similar magnitudes of the parameters have been obtained by simulation of the previously published spectra of Re(pda)₃, Re(tdt)₃ and Re(pdt)₃ (pda, O-phenylenediamine; tdt, toluene-3,4-dithiol; pdt, cis-1,2-diphenylethene-1,2-dithiol) by other authors. The unexpectedly large value of P relative to A is a common feature of all the Re tris-dithiolato and related trigonal prismatic complexes studied by EPR and is attributed to the high degree of delocalization of the unpaired electron onto the ligands and the distortion of the electron charge cloud. These factors are less evident in the complexes Tc(abt)₃ and Tc(bdt)₃. Intermolecular dipolar interactions, narrowed by weak exchange, are responsible for some of the spectral features observed in the solid state and concentrated (≫1 mM) frozen solutions, although there is no evidence for specific solute–solute interactions.     

Polarized absorption spectra of Co2+ in Na2Cd3Cl8 single crystals

Summary The polarized optical absorption spectra of Na₂Cd₃Cl₈: Co²⁺ in the range of 15 000 to 40 000 cm⁻¹ down to 15 K are reported. The Co²⁺ ion is found to occupy the Cd²⁺ sites in octahedral geometry and the spectra are interpreted satisfactorily in terms of a cubic ligand field model including spin-orbit coupling. The observed crystal field spectra are well reproduced withB=745 cm⁻¹,C=3410 cm⁻¹,Dq=700 cm⁻¹ and ζ (spin-orbit interaction) =520 cm⁻¹. No spectral evidence for tetragonal distortion is observed.     

Thin TiO2 grown by metal–organic chemical vapor deposition on (NH4)2S x -treated InP

The electrical characteristics of thin TiO₂ films prepared by metal–organic chemical vapor deposition grown on a p-type InP substrate were studied. For a TiO₂ film of 4.7 nm on InP without and with ammonium sulfide treatment, the leakage currents are 8.8×10⁻² and 1.1×10⁻⁴ A/cm² at +2 V bias and 1.6×10⁻¹ and 8.3×10⁻⁴ A/cm² at −2 V bias. The lower leakage currents of TiO₂ with ammonium sulfide treatment arise from the improvement of interface quality. The dielectric constant and effective oxide charge number density are 33 and 2.5×10¹³ cm², respectively. The lowest mid-gap interface state density is around 7.6×10¹¹ cm⁻² eV⁻¹. The equivalent oxide thickness is 0.52 nm. The breakdown electric field increases with decreasing thickness in the range of 2.5 to 7.6 nm and reaches 9.3 MV/cm at 2.5 nm.     

Effect of plasticizer on structural and electrical properties of nanocomposite solid polymer electrolytes

The solid polymer electrolyte films based on polyethylene oxide, NaClO₄ with dodecyl amine modified montmorillonite as filler, and polyethylene glycol as plasticizer were prepared by a tape casting method. The effect of plasticization on structural, microstructural, and electrical properties of the materials has been investigated. A systematic change in the structural and microstructural properties of plasticized polymer nanocomposite electrolytes (PPNCEs) on addition of plasticizer was observed in our X-ray diffraction pattern and scanning electron microscopy micrographs. Complex impedance analysis technique was used to calculate the electrical properties of the nanocomposites. Addition of plasticizer has resulted in the lowering of the glass transition temperature, effective dissociation of the salt, and enhancement in the electrical conductivity. The maximum value of conductivity obtained was ∼4.4 × 10⁻⁶ S cm⁻¹ (on addition of ∼20% plasticizer), which is an order of magnitude higher than that of pure polymer nanocomposite electrolyte films (2.82 × 10⁻⁷ S cm⁻¹). The enhancement in conductivity on plasticization was well correlated with the change in other physical properties.     

Three-dimensional simulation of laser–plasma-based electron acceleration

A sequential three-dimensional (3D) particle-in-cell simulation code PICPSI-3D with a user friendly graphical user interface (GUI) has been developed and used to study the interaction of plasma with ultrahigh intensity laser radiation. A case study of laser–plasma-based electron acceleration has been carried out to assess the performance of this code. Simulations have been performed for a Gaussian laser beam of peak intensity 5 × 10¹⁹ W/cm² propagating through an underdense plasma of uniform density 1 × 10¹⁹ cm^− 3, and for a Gaussian laser beam of peak intensity 1.5 × 10¹⁹ W/cm² propagating through an underdense plasma of uniform density 3.5 × 10¹⁹ cm^− 3. The electron energy spectrum has been evaluated at different time-steps during the propagation of the laser beam. When the plasma density is 1 × 10¹⁹ cm^− 3, simulations show that the electron energy spectrum forms a monoenergetic peak at ~14 MeV, with an energy spread of ±7 MeV. On the other hand, when the plasma density is 3.5 × 10¹⁹ cm^− 3, simulations show that the electron energy spectrum forms a monoenergetic peak at ~23 MeV, with an energy spread of ±7.5 MeV.     

Application of 940 nm high-power DFB lasers for line-broadening measurements at normal pressure using a robust and compact setup

High-power distributed-feedback (DFB) lasers for the wavelength range near 940 nm (i.e. about 10,600 cm⁻¹) were used for line-broadening measurements of individual rotational-vibrational absorption lines of water vapour at atmospheric pressure using a minimalist set-up. The laser has a maximum output power larger than 500 mW. Over the whole power range from threshold to maximum power, it operates in single mode operation with a tuning range of 4.7 nm, i.e. 50 cm⁻¹, at 20°C. With an emission line-width ≤2 MHz (0.66×10⁻⁴ cm⁻¹), the device is well suited for high-resolution spectroscopy.     

Numerical simulation of ultra-broadband phase-sensitive optical parametric amplification of image

The ultra-broadband phase-sensitive optical parametric amplification and de-amplification of image in a BBO nonlinear crystal with type I phase-matching are theoretically investigated. Amplified images with a gain of 10⁸ and a bandwidth as broad as 420 nm are realized using a 25 GW/cm ⁻² peak pump-power density with 1.125 ps chirped-pulse duration. The spatial resolution after optical parametric amplification is estimated to be q ₀ =200 rad/mm (i.e., 31.8 lines/mm), which corresponds to the size of the minimum resolvable feature of the amplified image ~5 μm.     

Raman spectra of various polymorphs of isotactic polypropylene

The Raman spectra of the α, γ, and smectic modifications of isotactic polypropylene (PP) are studied. The most significant spectral differences are observed in the frequency range around 2960 cm⁻¹ for the spectral doublet assigned to the asymmetric stretching vibrations of the CH₃ groups and in the frequency range around 800 cm⁻¹, which is used for analysis of the phase composition of isotactic PP. It is demonstrated that the peak positions and relative intensities of the doublet assigned to the asymmetric stretching vibrations of the CH₃ groups can be used to identify the polymorph modifications of isotactic PP.     

Influence of post-grown Li-rich and Li-poor vapor transport equilibration on composition, OH− absorption and optical-damage threshold of Mg (5 mol%) : LiNbO3 crystals

Li-rich (Li-poor) vapor transport equilibration (VTE) treatments on a number of Z-cut 0.47 mm thick congruent MgO (5 mol% in melt) : LiNbO₃ crystals were carried out at 1100°C over different durations ranging in 1–172 (40–395) h. Neutron activation analysis shows that neither Li-rich nor Li-poor VTE-induced Mg and Nb loss from the crystal occurred. The Li₂O content in the crystal was measured as a function of VTE duration by the gravimetric method. The Li-rich/Li-poor VTE effects on OH⁻ absorption were studied in comparison with the as-grown crystal. The study shows that the Li-rich VTE results in OH⁻ absorption band annihilation. After further oxidation treatment the band reemerges and peaks at the same wavenumber as that of the as-grown crystal (∼3535.6 cm⁻¹), showing that the MgO concentration in the Li-rich VTE crystal is still above the optical-damage threshold. The Li-poor VTE causes OH⁻ band shift to 3486.3–3491.6 cm⁻¹, indicating that the MgO concentration in all Li-poor VTE crystals is all below the optical-damage threshold. Further successive Li-rich VTE and oxidation treatments on the Li-poor VTE-treated crystal lead the band to shift back to 3535.6 cm⁻¹, showing that the post Li-rich VTE brought the Li-poor VTE-treated crystal above the optical-damage threshold again. It is found that the peaking position, band width, peaking absorption and band area of the absorption at ∼3486 cm⁻¹ all increase monotonously with the decrease of the Li₂O content arising from prolonged Li-poor VTE, and quantitative relationships to the Li₂O content are established for the latter two parameters. The VTE effects on the OH⁻ absorption are conducted with the VTE-induced OH⁻ content alteration and charge redistribution.