Glucose-Sensitive Hydrogels for the Controlled Release of Insulin

Hydrogels with an increased content of fine pores are synthesized via the copolymerization of acrylamide with N-(2-D-glucose) acrylamide and N,N-methylenebis(acrylamide) in the presence of concanavalin A and mercaptoacetic acid. Insulin introduced into the hydrogels is spontaneously released in response to increase in the concentration of glucose in the environment via a two-step mechanism similar to that in the case of the pancreas and the maximum rate is observed at the first stage.     

Swelling behavior of ionically cross-linked polyampholytic hydrogels in varied salt solutions

Ionically cross-linked polyampholytic hydrogels were synthesized by redox copolymerization of acrylamide and an ionic complex of (N,N-diethylamino)ethyl methacrylate and acrylic acid (designated as PADA hydrogel). The swelling behavior of the hydrogels in water indicated that a minimal equilibrium swelling ratio is found when the molar ratio of anionic/cationic monomers was 1.55. In NaCl solution, the hydrogels exhibited the typical swelling behavior of conventional polyampholytic gels. Their equilibrium swelling ratios increased with an increase in the NaCl concentration. In solutions of multivalent ions (CaCl₂ and trisodium citrate solutions), the equilibrium swelling ratios of the hydrogels increased first and were then followed by a decrease with an increase in salt concentration. Interestingly, an unexpected abrupt swelling phenomenon was observed when the fully swollen hydrogels in salt solution were transmitted to pure water. The unique swelling behavior of PADA hydrogels depends not only on the molar ratio of the anionic/cationic monomers but also on the valency of the ions.     

STUDY ON ACRYLAMIDE-SODIUM ACRYLATE COPOLYMER GELS

Acrylamide-sodium acrylate copolymer hydrogels have been obtained by radiation techniques. Two different methods have been used to introduce—COONa groups into polymer chains of the gels: (1) by partial hydrolysis of acrylamide homopolymer gel; (2) by direct copolymerization and crosslinking of acrylamide and sodium acrylate in aqueous solutions. It was found that the gels obtained in different ways had different properties, the swelling character of the gels obtained by partial hydrolysis were more sensitive to pH of swelling aqueous media, in order to explain these differences, ~(13)C-NMR techniques were used to investigate the sequence distribution of monomer units of both gels.     

Synthesis and thermal properties of a novel lactose‐containing poly(N‐isopropylacrylamide‐co‐acrylamidolactamine) hydrogel

An improved, simple, and efficient method for the synthesis of lactose‐containing monomer acrylamidolactamine (LAM) has been reported. Free radical copolymerization of this monomer with N‐isopropylacrylamide (NIPAM) in the presence of the crosslinking reagent N,N′‐methylenebisacrylamide (BisA) (1.2 mol %) proceeded smoothly in an aqueous solution using potassium persulfate (KPS) and N,N,N′,N′‐tetramethylethylenediamine (TMEDA) as the initiating system and gave transparent hydrogels. Reactivity ratios were estimated from copolymerization reactions carried out in solution without BisA crosslinker and at low conversion, by using both linearization and nonlinearization methods. They were found to be r_LAM = 0.75 and r_NIPAM = 1.22. The swelling behavior of the hydrogels was studied by immersion of the hydrogels in deionized water at different temperatures. Equilibrium water uptake was increased when the LAM content was higher than 47 mol %, and reached ≈ 44‐fold with 100 mol % LAM at room temperature. Depending on the composition, the gels showed sharp swelling transitions with small changes in temperature. Differential scanning calorimetry (DSC) was used to characterize the swelling transition and the organization of water in the copolymer hydrogels. The amounts of freezable water in these hydrogels ranged from 81 to 89%, and was not correlated to the content of the sugar monomer. These gels have potential applications as biocompatible materials. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 1393–1402, 1999     

Effect of chemical structure on the properties of some hydrogels prepared by using gamma radiation polymerization

Several hydrogels were prepared using radiolytic polymerization of aqueous solutions of acrylamide or acrylamide containing appropriate comonomer such as acrylic acid, maleic acid, itaconic acid, and maleic anhydride. The hydrogels have been prepared at an irradiation dose of 30 kGy. The effects of the chemical structure of the monomer(s) and crosslinking agents on the yield of homopolymer(s) or copolymers have been studied. These crosslinking agents include N, N′‐methylene dimethacrylate (MDA) and N, N′‐methylene bisallyamide (MBA). The hydrogels obtained were characterized using swelling technique, thermal and spectroscopic analysis. The results obtained showed that the prepared samples are able to reject sodium ions and are not able to recover the Basic Blue Dye from their aqueous solution. © 2005 John Wiley & Sons, Ltd.     

Thermosensitive poly(N-isopropylacrylamide-co-acrylamide) hydrogels: Synthesis, swelling and interaction with ionic surfactants

Thermosensitive hydrogels were prepared by free-radical polymerization in aqueous solution from N-isopropylacrylamide (NIPA) and acrylamide (AAm) monomers. N,N-Methylenebis(acrylamide) (MBAAm) was used as a crosslinker. A kinetic study of the absorption determined the transport mechanism. The diffusion coefficients of these hydrogels were calculated for the Fickian mechanism. It was shown that the swelling behavior of the P(NIPA-co-AAm) hydrogels can be controlled by changing the amount of MBAAm. The swelling equilibrium of the P(NIPA-co-AAm) hydrogels was also investigated as a function of temperature in aqueous solutions of the anionic surfactant sodium dodecyl sulfate (SDS) and the cationic surfactant dodecyltrimethylammonium bromide (DTAB). In SDS and DTAB solutions, the equilibrium swelling ratio of the hydrogels increased, this is ascribed to the conversion of non-ionic P(NIPA-co-AAm) hydrogel into polyelectrolyte hydrogels due to binding of surfactant molecules through the hydrophobic interaction. Additionally, the amount of free SDS and DTAB ions was measured at different temperatures by a conductometric method, it was found that the electric conductivity of the P(NIPA-co-AAm)—surfactant systems depended strongly on both the type and concentration of surfactant solutions.     

Correlation of chemical structure and swelling behavior in N-alkylacrylamide hydrogels

The thermoshrinking properties have been studied for the series of N-alkyl-acrylamide hydrogels (alkyl = methyl, ethyl, isopropyl, and n-propyl), which were prepared by free-radical copolymerization of the alkylacrylamide, sodium acrylate, and N,N′-methylenebis(acrylamide) (BIS) in aqueous solution. The reaction mixtures were prepared using the same nominal compositions in an effort to study the effect of the chemical structure of the alkyl substituent on the gel swelling behavior as a function of temperature. The alkyl group was found to have a pronounced effect on the features of gel swelling. Generally, larger alkyl chains produced dramatic decreases in gel transition temperature. In addition, a change in the nature of the swelling behavior from continuous to discontinuous was noted upon changing the alkyl group from ethyl to the two propyl derivatives. Discontinuous transitions were accompanied by hysteresis. The transition temperatures of the isomeric propyl derivatives were found to differ by 12°C, with n-propyl exhibiting the lower value. Additionally, a quantitative correlation was found between the gel transition temperatures and the water/octanol partition coefficients for appropriately chosen small molecule model compounds. The transition temperatures of other gels in the series, including the cyclopropyl derivative and the n-propyl/isopropyl copolymer gels (NIPA/NNPA), also fit this correlation. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 2095–2102, 1998     

羧甲基纤维素与丙烯酸接枝共聚凝胶的溶胀动力学及过溶胀平衡特性的研究

采用接枝共聚合成了羧甲基纤维素钠、丙烯酸与N,N′-亚甲基双丙烯酰胺的交联凝胶, 研究了这类凝胶在不同pH值的缓冲溶液中的溶胀行为, 发现在酸性介质中凝胶的溶胀动力学行为表现出过溶胀平衡特性(overshooting effect), 即凝胶先发生溶胀到最大值, 然后再逐渐消溶胀到平衡. 这种现象可归因于凝胶溶胀过程中羧基之间通过氢键所产生的协同物理交联. 较之凝胶的组成, 缓冲溶液的pH值对过溶胀平衡现象的影响更为显著. 前者是因为凝胶羧基的总摩尔分数并不随两组分结构单元摩尔数的改变而改变, 羧基之间通过氢键形成的物理交联程度在交联剂摩尔分数接近的条件下变化不大; 后者是由于溶液的pH值显著影响凝胶羧基的质子化程度, 进而影响羧基之间通过氢键形成的物理交联程度. 凝胶在酸性介质中的溶胀过程符合E. Díez-Peña等提出的溶胀动力学定量模型, 理论曲线与实验数据有较好的相关性. 凝胶在pH≥5.0的缓冲溶液中的溶胀不产生过溶胀平衡现象, 这一现象归因于完全离子化的羧基之间不能形成物理交联. 凝胶的溶胀过程遵循Schott二级溶胀动力学.     

pH‐responsive ionic poly(N,N‐diethylaminoethyl methacrylate‐co‐N‐vinyl‐2‐pyrrolidone) hydrogels: Synthesis and swelling properties

A series of an ionic hydrogels composed of N,N‐diethylaminoethyl methacrylamide (DEAEMA), N‐vinyl‐2‐pyrrolidone (VP), and itaconic acid were synthesized by free‐radical cross‐linking copolymerization in water–ethanol mixture by using N,N‐methylenebis(acrylamide) as the cross‐linker, ammonium persulfate as the initiator, and N,N,N′,N′‐tetramethylenediamine as the activator. The swelling behaviors of these hydrogels were analyzed in buffer solutions at various pH. It was observed that the swelling behavior of cross‐linked ionic poly(N,N‐diethylaminoethyl methacrylamide‐co‐N‐vinyl‐2‐pyrrolidone) [P(DEAEMA/VP)] hydrogels at different pH agreed with the modified Flory–Rehner equation based on the affine network model and the ideal Donnan theory. The swelling process in buffer solutions at various pH was found to be Fickian‐type diffusion. The pH‐reversibility and on–off switching properties of the P(DEAEMA/VP) hydrogels may be considered as good candidate to design novel drug‐delivery system. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 2819–2828, 2005     

Preparation of homogeneous polyacrylamide hydrogels by free-radical crosslinking copolymerization

Network microstructures of acrylamide (AAm)-based hydrogels were investigated by static and dynamic light scattering techniques. The hydrogels were prepared by free-radical crosslinking copolymerization of the monomers acrylamide (AAm), N,N-dimethylacrylamide (DMA) and N-isopropylacrylamide (NIPA) with N,N′-methylenebis(acrylamide) as a crosslinker in aqueous solutions. It was observed that the addition of DMA or NIPA into the comonomer feed suppresses the extent of frozen concentration fluctuations in polyacrylamide (PAAm) hydrogels. The cooperative diffusion coefficient increases while both the static and dynamic correlation lengths decrease as the amount of DMA in the comonomer feed is increased. Formation of homogeneous PAAm hydrogels by introduction of hydrophobic moieties was explained as a result of the steric effect of the bulky side groups on DMA or NIPA segments.     

Synthesis and network structure of ionic poly(N,N-dimethylacrylamide-co-acrylamide) hydrogels: Comparison of swelling degree with theory

At four different charge densities, ionic hydrogels based on N,N-dimethylacrylamide (DMAAm), acrylamide (AAm), and itaconic acid (IA) were synthesized by free-radical cross-linking copolymerization in water with N,N-methylenebis(acrylamide) (BAAm) as the cross-linker, ammonium persulfate (APS) as the initiator, and N,N,N′,N′-tetramethylenediamine (TEMED) as the activator. The swelling behaviors of these hydrogels were analyzed in buffer solutions at various pH. It was observed that the swelling behavior of cross-linked ionic poly(N,N-dimethylacrylamide-co-acrylamide) [P(DMAAm-co-AAm)] hydrogels at different pHs agreed with the modified Flory-Rehner equation based both on the phantom network and affine network models and the ideal Donnan theory. In addition, the kinetics of swelling of the hydrogels was studied in pH 2, 5 and 9 buffer solutions. The swelling curves exhibited the characteristic features of transport process, apparently the Fickian diffusion of fast rates.     

Double-networks based on interconnected amphiphilic “in–out” star first polymer conetworks prepared by RAFT polymerization

Double-network hydrogels were prepared using well-defined first networks comprising interconnected amphiphilic “in-out” star copolymers synthesized via sequential reversible addition-fragmentation chain transfer (RAFT) polymerization, and second networks based on a photopolymerized mixture of acrylamide and N,N′-methlyenebisacrylamide. All first and double-network hydrogels were characterized in terms of their aqueous degrees of swelling and mechanical properties in compression. The most hydrophobic first and double-network hydrogels exhibited the best mechanical properties, which may be attributed to their low aqueous swelling degrees and good mesoscale organization in water as revealed using small-angle neutron scattering (SANS) which showed that the size of the formed hydrophobic domains could be controlled by the polymer conetwork structure. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 2161–2174     

Temperature‐responsive linear polyelectrolytes and hydrogels based on [2‐(methacryloyloxy)ethyl] trimethylammonium chloride and N‐isopropylacrylamide and their complex formation with potassium hexacyanoferrates (II,III)

Water‐soluble temperature‐responsive polyelectrolytes and hydrogels have been synthesized by γ‐radiation copolymerization of [2‐(methacryloyloxy)‐ethyl]trimethylammonium chloride with N‐isopropylacrylamide. Complex formation of soluble copolymers with potassium hexacyanoferrates (II, III) was studied in aqueous solutions. It was shown that, depending on the concentration and temperature, the formation of soluble or insoluble polycomplexes is observed. The hydrogels show good ability to absorb potassium hexacyanoferrates (II, III) from aqueous solutions. Sorption ability of hydrogels depends on the content of cationic monomer in copolymer and the nature of coordination ion. © 2003 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 42: 515–522, 2004     

New hydrogels based on the interpenetration of physical gels of agarose and chemical gels of polyacrylamide

In this paper we report a novel method for preparing interpenetrating polymer hydrogels of agarose and polyacrylamide (PAAm) in three steps. The procedure consists in (i) formation of physical hydrogels of agarose, (ii) diffusion of acrylamide, N,N′-methylene-bis-acrylamide and potassium persulfate (the initiator) from aqueous solutions inside the gel of agarose, and (iii) cross-linking copolymerization reaction of the aforementioned reactants to produce PAAm chemical gels interpenetrated with the agarose physical gels. Viscoelasticity measurements and thermal analysis have been performed in order to follow the kinetics of copolymerization. The viscoelastic, swelling and thermal properties of the resulting hydrogels confirm the formation of an interpenetrated system. Further evidence of interpenetration is obtained from inspection with atomic force microscopy. The improvement of the agarose and PAAm gel properties in the resulting interpenetrated hydrogel is analyzed in view of the results.     

Reducibly degradable hydrogels of PNIPAM and PDMAEMA: Synthesis,stimulus‐response and drug release

Reducibly degradable hydrogels of poly(N‐isopropylacrylamide) (PNIPAM) and poly(N,N‐dimethylaminoethyl methacrylate) (PDMAEMA) were synthesized by the combination of reversible addition‐fragmentation chain transfer (RAFT) polymerization and click chemistry. The alkyne‐pending copolymer of PNIPAM or PDMAEMA was obtained through RAFT copolymerization of propargyl acrylate with NIPAM or DMAEMA. Bis‐2‐azidyl‐isobutyrylamide of cystamine (AIBCy) was used as the crosslinking reagent to prepare reducibly degradable hydrogels by click chemistry. The hydrogels exhibited temperature or pH stimulus‐responsive behavior in water, with rapid response, high swelling ratio, and reproducible swelling/shrinkage cycles. The loading and release of ceftriaxone sodium proved the feasibility of the hydrogels as the stimulus‐responsive drug delivery system. Furthermore, the presence of disulfide linkage in AIBCy favored the degradation of hydrogels in the reductive environment. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 3604–3612, 2010     

Swelling behavior of amphiphilic hydrogels of copolymers of the vinyl ether of ethylene glycol and vinyl isobutyl ether,and their interaction with cationic surfactant

Amphiphilic hydrogels of copolymers of the vinyl ether of ethylene glycol and vinyl isobutyl ether were synthesized by -radiation-induced free radical polymerization. Hydrogels with certain copolymer compositions showed thermo-sensitive behavior in aqueous solutions. The swelling behavior of the hydrogels in cetylpyridinium bromide aqueous solution was studied. Increased swelling of the hydrogels was observed in the surfactant solutions. The increased swelling was more prominent for the hydrogels with a higher content of hydrophobic moiety in the copolymer composition, and with higher surfactant concentration. The reason for this phenomenon is discussed. Treatment of some hydrogels in the surfactant solutions resulted in higher swelling ability in distilled water with distinct thermo-induced contraction over a narrow temperature interval.     

Swelling behavior of strong polyelectrolyte poly(N-t-butylacrylamide-co-acrylamide) hydrogels

Temperature-sensitive ionic hydrogels based on N-t-butylacrylamide (TBA), acrylamide (AAm), 2-acrylamido-2-methylpropane sulfonic acid sodium salt (AMPS) and N,N^′-methylenebis(acrylamide) (BAAm) monomers were prepared. The molar ratio of TBA to the monomers AAm and AMPS was fixed at 60/40, while the AMPS content of the hydrogels was varied. The elastic modulus of the hydrogels was in the range of 347-447 Pa, much lower than the modulus of PAAm or poly(N-isopropylacrylamide) hydrogels due to the reduced crosslinking efficiency of BAAm in TBA/AAm copolymerization. The hydrogels exhibited swelling-deswelling transition in water depending on the temperature. Increasing ionic group (AMPS) content resulted in shifting of the transition temperature interval in which the deswelling takes place. The higher the ionic group content, the broader the temperature interval at the phase transition. Ionic hydrogels exhibited first-order reentrant conformational transitions in ethanol-water and in dimethylsulfoxide (DMSO)-water mixtures. The higher the ionic group content of the hydrogels the narrower the ethanol (or DMSO) range in which the reentrant phenomena occur. By taking into account the difference of the solvent mixture composition inside and outside the gel, the equilibrium swelling theory provided a satisfactory agreement to the experimental swelling data of the hydrogels immersed in the solvent mixtures.     

Effect of association processes on polymerization of N-[3-(dimethylamino)propyl]methacrylamide salts in aqueous solutions

The effect of associative interactions of monomers and propagating macroradicals in homopolymerization of N-[3-(dimethylamino)propyl]methacrylamide salts and their copolymerization with acrylonitrile and acrylamide in aqueous solution was studied.     

Preparation of a Cu(II)‐Immobilized Co‐polymer(CIC) for Effective Removal of Urea

The study describes the preparation of Cu(II)‐immobilized copolymer(CIC) under optimum conditions for the effective removal of urea. The copolymeric hydrogels, synthesized by free‐radical aqueous copolymerization of monomers acrylamide and sodium acrylate, have been analyzed for their Cu(II) uptake behavior. The sorption of Cu(II) into polymer follows a Langmuir–type pattern and amount sorbed depends upon the composition of copolymeric gels, presence of other co‐ions in the solution, pH of the solution, initial concentration of sorbate, degree of crosslinking of the copolymeric hydrogel, temperature of the solution etc. In the preliminary study, the Cu(II) immobilized co‐polymer(CIC) sorbent demonstrated a fair tendency to remove urea from aqueous solutions.     

Modified carrageenan. 5. Preparation,swelling behavior,salt‐ and pH‐sensitivity of partially hydrolyzed crosslinked carrageenan‐graft‐polymethacrylamide superabsorbent hydrogel

The polysaccharide, kappa‐carrageenan (κC) was chemically modified to achieve a novel superabsorbent hydrogel via graft copolymerization of methacrylamide (MAM) onto the substrate followed by alkaline hydrolysis. Ammonium persulfate (APS) and N,N′‐methylene bisacrylamide (MBA) were used as a free‐radical initiator and a crosslinker, respectively. The saponification reaction was carried out using sodium hydroxide aqueous solution. Either κC‐g‐PMAM or hydrolyzed κC‐g‐PMAM (PMAM: polymethacrylamide) was characterized by FT‐IR spectroscopy. The effect of grafting variables (i.e. concentration of MBA, MAM, and APS) and alkaline hydrolysis conditions (i.e. NaOH concentration, hydrolysis time and temperature) were systematically optimized to achieve a hydrogel with swelling capacity as high as possible. The swelling capacity of these hydrogels was also measured in various salt solutions. Results indicated that the swelling ratios decreased with an increase in the ionic strength of the salt solutions. This behavior can be attributed to charge screening effect for monovalent cations, as well as ionic crosslinking for multivalent cations. Absorbency of superabsorbing hydrogels was examined in buffer solutions with pH range 1–13. Also, the pH reversibility and on–off switching behavior, at pH values 3.0 and 8.0, makes the synthesized hydrogels good candidates for controlled delivery of bioactive agents. Finally, swelling kinetics in distilled water and various salt solutions was preliminary investigated. Results showed that the swelling in water was faster than in saline solutions. Copyright © 2004 John Wiley & Sons, Ltd.