Determination of the molecular weight of polyoxypropylenepolyols by <Superscript>1</Superscript>H NMR spectroscopy

Commercial and laboratory samples of polyoxypropylenepolyols were studied by ¹H NMR spectroscopy at operating frequencies of 100 and 500 MHz. Various methods depending on the solvent used were suggested for determining the equivalent weight (molecular weight of the polyether per terminal hydroxy group). The ¹H NMR data are compared to the data obtained by chemical methods and gel permeation chromatography.     

Determination of configurational isomers in polybutadienes by <Superscript>1</Superscript>H and <Superscript>13</Superscript>C NMR spectroscopy

The NMR spectra (600 MHz) of polybutadienes containing different amounts of cis-1,4, trans- 1,4 and 1,2 units are analyzed. The critical consideration of signal assignment and the comparison of ¹H and ¹³C NMR data reveal that there are significant limitations to the quantitative characterization of polybutadienes with the use of NMR spectroscopy.     

Quantitative analysis of hydrogen peroxide by <Superscript>1</Superscript>H NMR spectroscopy

A technique utilizing ¹H NMR spectroscopy has been developed to measure the concentration of hydrogen peroxide from 10^–3 to 10 M. Hydrogen peroxide produces a peak at around 10–11 ppm, depending upon the interaction between solvent molecules and hydrogen peroxide molecules. The intensity of this peak can be monitored once every 30 s, enabling the measurement of changes in hydrogen peroxide concentration as a function of time. ¹H NMR has several advantages over other techniques: (1) applicability to a broad range of solvents, (2) ability to quantify hydrogen peroxide rapidly, and (3) ability to follow reactions forming and/or consuming hydrogen peroxide as a function of time. As an example, this analytical technique has been used to measure the concentration of hydrogen peroxide as a function of time in a study of hydrogen peroxide decomposition catalyzed by iron(III) tetrakispentafluorophenyl porphyrin.Electronic Supplementary Material Supplementary material is available for this article at     

Quantitative <Superscript>2</Superscript>H NMR spectroscopy

The selectivity of deuterium distribution between the nonequivalent positions in 3-carene (1), 4-α-acetyl-2-carene (2), and 4-(1-hydroxyethyl)-2-carene (3) has been measured by ²H-{¹H} NMR spectroscopy at the natural abundance of deuterium. These “H/D-isotope portraits” were shown to be typical of terpenes and terpenoids produced in plants via the biosynthetic DXP pathway. The mechanism of acylation of 1 was studied by the density functional theory method (PBE functional, TZ2p basis set). The six-membered ring in compound 1 is planar. However, the endo attack of electrophiles on this ring is more favorable both kinetically and thermodynamically. It was shown both experimentally and theoretically that the elimination of a hydrogen atom in the second reaction step proceeds stereoselectively at the C(2) atom from the anti position with respect to the three-membered ring and occurs with pronounced nucleophilic assistance from the carbonyl group. For Part 2, see Ref. 1. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 8, pp. 1657–1664, August, 2008.     

Metabolic analysis of human biological fluids by <Superscript>1</Superscript>H NMR spectroscopy

High-resolution NMR spectroscopy is widely used for the determination of the structure of complex molecules and the quantitative analysis of multicomponent mixtures in solutions. In the past decade, the extremely rapid development of NMR instrumentation resulted in an increase in the resolution and sensitivity of instruments by more than an order of magnitude. This has opened up new opportunities for the use of NMR spectroscopy in the quantitative analysis of the most important biological fluids (urine, blood plasma, cerebrospinal fluid, saliva, bile, tears, etc.), each of them can contain to several thousands of components in micromolar or lower concentrations. Clinicians and biologists from many countries used new capabilities of NMR spectroscopy to develop efficient methods for metabolic studies, medical diagnostics, and the development of new pharmaceutical preparations. This review briefly describes the status of studies in this new rapidly developing area of analytical chemistry and summarizes some of our experimental results.     

Hydridosilazanes hydrolysis-condensation reactions studied by <Superscript>1</Superscript>H and <Superscript>29</Superscript>Si liquid NMR spectroscopy

Hydridosilazane compounds containing Si–N and Si–H bonds can be used as precursors of SiO_x materials. The hydrolysis-condensation reactions of tetramethyldisilazane, as a polyhydridosilazane model compound, were investigated by ¹H and ²⁹Si liquid NMR spectroscopy. These reactions were carried out at room temperature for up to 120 min in presence of water. The identified products are short linear siloxane species (hydride terminated polydimethylsiloxanes M^HD_xM^H) and cyclosiloxanes. Silicon hydride persistence in the reactional mixture suggested that silazane group is more sensitive to hydrolysis reaction than silicon hydride group. Moreover, additional experiments evidenced that the low steric hindrance of the silicon hydride influences the silazane hydrolysis kinetic. Hence the presence of ammonia released during silazane hydrolysis reaction was demonstrated to be a catalyst of the silicon hydride hydrolysis reaction.     

Enzymatic synthesis and analytical monitoring of terpene ester by <Superscript>1</Superscript>H NMR spectroscopy

Terpene esters of fatty acids have potential applications in food, cosmetic, and pharmaceutical industries. The present study focuses on the synthesis of terpene esters of long chain fatty acids catalyzed by Candida antarctica lipase B. Different parameters like temperature, solvent, and enzyme concentration for the esterification of terpene alcohols (geraniol and citronellol) with oleic acid were studied. Maximum conversion (98 %) was found for both terpene esters at 60°C in 2,2,4-trimethylpentane as well as in dry hexane and around 95–97 % in other tested solvents. The reaction was also carried out using stearic and linoleic acid in hexane to study the effects of unsaturation in the substrate in which stearic acid showed the maximum conversion. The reaction was monitored by ¹H nuclear magnetic resonance spectroscopy. Using the peak integration values of methylene protons of terpene and terpene ester of δ = 3.6 and 4.0 for citronellol and δ = 4.2 and 4.6 for geraniol, respectively, percentage conversions of each of the esters were calculated.     

Fruit juice authentication by <Superscript>1</Superscript>H NMR spectroscopy in combination with different chemometrics tools

To discriminate orange juice from grapefruit juice in a context of fraud prevention, ¹H NMR data were submitted to different treatments to extract informative variables which were then analysed using multivariate techniques. Averaging contiguous data points of the spectrum followed by logarithmic transformation improved the results of the data analysis. Moreover, supervised variable selection methods gave better rates of classification of the juices into the correct groups. Last, independent-component analysis gave better classification results than principal-component analysis. Hence, ICA may be an efficient chemometric tool to detect differences in the ¹H NMR spectra of similar samples, and so may be useful for authentication of foods.     

Molecular distribution at the interface in an aqueous triethylamine solution. <Superscript>1</Superscript>H NMR

The ¹H NMR spectra in a binary aqueous triethylamine solution are recorded with a lower critical point of the liquid–liquid phase transition. It is found that, above the critical temperature the ¹H NMR spectra of water and triethylamine molecules in the phase with a predominant content of triethylamine molecules are characterized by an inhomogeneous broadening. It can be supposed that the found broadening is due to the features of the molecular distribution at the interface.     

<Superscript>1</Superscript>H and <Superscript>13</Superscript>C NMR spectra of some drimanic sesquiterpenoids

One- and two-dimensional homo- and heteronuclear correlation proton, carbon, proton—proton, and proton—carbon NMR spectra of fifteen drimanic sesquiterpenoids: 11,12-dibromodrima-5,8-dien-7-one, drim-8-en-7-one, 11-hydroxydrim-8-en-7-one, 11,12-dihydroxydrim-8-en-7-one, 11-hydroxy-11,12-epoxydrim-8-en-7-one, 11-hydroxy-11,12-epoxydrim-8-en-7-one, 8,9-epoxydriman-7-one, 8,9-epoxydriman-7-ol, 11,12-diacetoxydrim-8-en-7-ol, drimane-7,8,11-triol, 7,8-isopropylidenedioxydriman-11-al, 9, 11-dihydroxydrim-7-en-6-one, drimane-7,8,9-triol, drimane-7,8,11-triol, and drim-8-ene-7,11,12-triol were studied. The proton and carbon chemical shifts were assigned.__________Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2589–2594, December, 2004.     

Quick Determination of the Total Content of Aromatic Hydrocarbons in Reformer Naphthas by <Superscript>1</Superscript>H NMR Spectroscopy

A procedure for fast determination of the total content of arenes in reformer naphthas by ¹H NMR spectroscopy was developed and tested. Their content is determined from the ratio of the integral intensities of the signals of aromatic protons and alkane methyl protons, using a calibration plot constructed on the basis of GLC data.     

A <Superscript>1</Superscript>H NMR study of Nile Red solvation

In order to evaluate the capabilities of NMR spectroscopy for investigation of the solvatochromic effect in luminophore solutions, the ¹H NMR chemical shifts of Nile Red in mixtures of solvents with different polarities (benzene, toluene, methanol) has been determined. Their dependence upon the solvent mixture composition has been revealed and binding sites for luminophore and solvent component molecules have been determined. The results of the NMR study are consistent with data on the fluorescence of Nile Red solutions in toluene-ethanol mixtures.     

Structure of binuclear platinum(III) acetamidate complexes in solutions as probed by <Superscript>195</Superscript>Pt, <Superscript>13</Superscript>C,and <Superscript>1</Superscript>H NMR spectroscopy

¹⁹⁵Pt, ¹H, and ¹³C NMR spectroscopy was used to study the structure of binuclear platinum(III) acetamidate complexes with 1,10-phenanthroline and 2,2′-bipyridine ligands [Pt₂(phen)₂(acam)₄](NO₃)₂ (1) and [Pt₂(bipy)₂(acam)₄](NO₃)₂ (2) in aqueous solutions. The ¹⁹⁵Pt NMR spectra of solutions of complexes 1 and 2 in D₂O exhibit two signals with satellites due to the ¹⁹⁵Pt–¹⁹⁵Pt spin-spin coupling (¹ J(Pt–Pt) ≈ 6345 Hz), whereas their ¹H and ¹³C NMR spectra contain four sets of signals for the protons and the carbon atoms of the heterocyclic and acetamidate ligands. The signals were assigned using the COSY, NOESY, and HSQC/ HMBC experiments and comparing the coordination shifts of the signals for the protons of heterocycles. These data allowed us to draw a conclusion that binuclear complexes 1 and 2 in solution have a head-to-head structure with nonequivalent platinum(III) atoms (coordination cores PtN₅ and PtN₃O₂), the axial-equatorial coordination of the bidentate heterocyclic molecules, and two bridging and two terminal acetamidate ligands.     

High-Resolution <Superscript>1</Superscript>H and <Superscript>13</Superscript>C NMR of Glycyrrhizic Acid and Its Esters

Resonances for protons and C atoms in the ¹H and ¹³C NMR spectra of glycyrrhizic acid and its esters were assigned using high-resolution ¹H (600 MHz) and ¹³C (150 MHz) NMR methods. __________ Translated from Khimiya Prirodnykh Soedinenii, No. 4, pp. 347–350, July–August, 2005.     

Quantification of chondroitin sulfate and dermatan sulfate in danaparoid sodium by <Superscript>1</Superscript>H NMR spectroscopy and PLS regression

Danaparoid sodium (the active pharmaceutical ingredient in Orgaran; Merck Sharp and Dohme) is a biopolymeric non-heparin drug used as anticoagulant and antithrombotic agent approved for the prophylaxis of post-operative deep-vein thrombosis, which may lead to pulmonary embolism in patients undergoing, e.g., elective hip replacement surgery. It consists of a mixture of three glycosaminoglycans (GAGs): heparan sulfate (HS), dermatan sulfate (DS), and chondroitin sulfate (CS). Currently, the CS and DS content are quantified by means of a time-consuming enzymatic method. In this paper the use of ¹H NMR in combination with multivariate regression (partial least-squares, PLS) is proposed as a new method. In order to evaluate the proposed method, a series of danaparoid sodium samples were analyzed and the results were compared with those obtained by the enzymatic method (reference method). The results showed that the proposed ¹H NMR method is a good alternative for analysis of CS and DS in danaparoid sodium. Accuracy of ±0.7% (w/w) and ±1.1% (w/w) for CS and DS was obtained by the ¹H NMR method and accuracy of ±1.0% (w/w) and ±1.3% (w/w) by the enzymatic method. Furthermore, the use of ¹H NMR in combination with PLS results in a fast quantification. The analysis time is reduced to 35 min per sample instead of 60 h for a maximum of 16 samples.     

Determination of galactosamine impurities in heparin samples by multivariate regression analysis of their <Superscript>1</Superscript>H NMR spectra

Heparin, a widely used anticoagulant primarily extracted from animal sources, contains varying amounts of galactosamine impurities. Currently, the United States Pharmacopeia (USP) monograph for heparin purity specifies that the weight percent of galactosamine (%Gal) may not exceed 1%. In the present study, multivariate regression (MVR) analysis of ¹H NMR spectral data obtained from heparin samples was employed to build quantitative models for the prediction of %Gal. MVR analysis was conducted using four separate methods: multiple linear regression, ridge regression, partial least squares regression, and support vector regression (SVR). Genetic algorithms and stepwise selection methods were applied for variable selection. In each case, two separate prediction models were constructed: a global model based on dataset A which contained the full range (0–10%) of galactosamine in the samples and a local model based on the subset dataset B for which the galactosamine level (0–2%) spanned the 1% USP limit. All four regression methods performed equally well for dataset A with low prediction errors under optimal conditions, whereas SVR was clearly superior among the four methods for dataset B. The results from this study show that ¹H NMR spectroscopy, already a USP requirement for the screening of contaminants in heparin, may offer utility as a rapid method for quantitative determination of %Gal in heparin samples when used in conjunction with MVR approaches.     

Diffusion mobility of alkali metals in perfluorinated sulfocationic and carboxylic membranes as probed by <Superscript>1</Superscript>H, <Superscript>7</Superscript>Li, <Superscript>23</Superscript>Na,and <Superscript>133</Superscript>Cs NMR spectroscopy

Water self-diffusion and ion mobilities in various ionic forms (H⁺, Li⁺, Na⁺, Rb⁺, Cs⁺, and Ba²⁺) of perfluorinated sulfocationic membranes MF-4SK were studied by NMR and impedance spectroscopy. When degrees of hydration are low, the self-diffusion coefficients of water and ionic conductivities are considerably affected by the water content of the membrane. The self-diffusion coefficients decrease in the order H⁺ > Ba²⁺ > Cs⁺ > Rb⁺ > Na⁺ > Li⁺, whereas the ion mobility decreases in the order H⁺ > Li⁺ > Na⁺ > Cs⁺ > Ba²⁺.     

Hydrolysis of isobutylaluminum aryloxides studied by <Superscript>1</Superscript>H NMR and quantum chemical methods

The results of ¹H NMR and quantum chemical studies of hydrolysis of isobutylaluminum aryloxides are presented. According to the data of ¹H NMR spectroscopy, the hydrolysis of monomeric diisobutylaluminum aryloxides (2,6-Bu₂ ^t—C₆H₃O)AlBu₂ ⁱ and (2,6-Bu₂ ^t,4-Me—C₆H₂O)AlBu₂ ⁱ occurs selectively at the Al—OAr bond to form the corresponding sterically bulky phenol and polyisobutylaluminoxane. At the molar ratios Al: H₂O = 2, the formed sterically bulky phenol reacts slowly with diisobutylaluminum monoaryloxide to form isobutylaluminum diaryloxide. Dimeric aryloxide [(2-Bu^t—C₆H₄O)AlBu₂ ⁱ]₂ is not hydrolyzed under similar conditions. The quantum chemical calculations confirmed the experimental results: the hydrolysis at the Al—OAr bond has a lower energy barrier than that at the Al—C bond because of the formation of \({H_{{H_2}O}} \ldots {O_{O - Ar}}\) hydrogen bonds.