The impact of tripodal chelates on water exchange kinetics and mechanisms: a variable temperature and pressure 17O NMR study to clarify the structure-reactivity relationship in [Fe(II)(L)(H2O2](-) complexes

The effect of temperature and pressure on the water exchange reaction of [Fe(II)(NTA)(H2O)2](-) and [Fe(II)(BADA)(H2O)2](-) (NTA = nitrilotriacetate; BADA = beta-alanindiacetate) was studied by 17O NMR spectroscopy. The [Fe(II)(NTA)(H2O)2](-) complex showed a water exchange rate constant, k(ex), of (3.1 +/- 0.4) x 10(6) s(-1) at 298.2 K and ambient pressure. The activation parameters DeltaH( not equal), DeltaS( not equal) and DeltaV( not equal) for the observed reaction are 43.4 +/- 2.6 kJ mol(-1), + 25 +/- 9 J K(-1) mol(-1) and + 13.2 +/- 0.6 cm(3) mol(-1), respectively. For [Fe(II)(BADA)(H2O)2](-), the water exchange reaction is faster than for the [Fe(II)(NTA)(H2O)2](-) complex with k(ex) = (7.4 +/- 0.4) x 10(6) s(-1) at 298.2 K and ambient pressure. The activation parameters DeltaH( not equal), DeltaS( not equal) and DeltaV( not equal) for the water exchange reaction are 40.3 +/- 2.5 kJ mol(-1), + 22 +/- 9 J K(-1) mol(-1) and + 13.3 +/- 0.8 cm(3) mol(-1), respectively. The effect of pressure on the exchange rate constant is large and very similar for both systems, and the numerical values for DeltaV( not equal) suggest in both cases a limiting dissociative (D) mechanism for the water exchange process.     

Elucidation of the solution structure and water-exchange mechanism of paramagnetic [Fe(II)(edta)(H(2)O)](2-)

The lability and structural dynamics of [Fe(II)(edta)(H(2)O)](2-) (edta = ethylenediaminetetraacetate) in aqueous solution strongly depend on solvent interactions. To study the solution structure and water-exchange mechanism, (1)H, (13)C, and (17)O NMR techniques were applied. The water-exchange reaction was studied through the paramagnetic effect of the complex on the relaxation rate of the (17)O nucleus of the bulk water. In addition to variable-temperature experiments, high-pressure NMR techniques were applied to elucidate the intimate nature of the water-exchange mechanism. The water molecule in the seventh coordination site of the edta complex is strongly labilized, as shown by the water-exchange rate constant of (2.7 +/- 0.1) x 106 s(-1) at 298.2 K and ambient pressure. The activation parameters DeltaH(not equal), DeltaS(not equal), and DeltaV(not equal) were found to be 43.2 +/- 0.5 kJ mol(-1), +23 +/- 2 J K(-1) mol(-1), and +8.6 +/- 0.4 cm(3) mol(-1), respectively, in line with a dissociatively activated interchange (Id) mechanism. The scalar coupling constant (A/h) for the Fe(II)-O interaction was found to be 10.4 MHz, slightly larger than the value A/h = 9.4 MHz for this interaction in the hexa-aqua Fe(II) complex. The solution structure and dynamics of [Fe(II)(edta)(H(2)O)](2-) were clarified by (1)H and (13)C NMR experiments. The complex undergoes a Delta,Lambda-isomerization process with interconversion of in-plane (IP) and out-of-plane (OP) positions. Acetate scrambling was also found in an NMR study of the corresponding NO complex, [Fe(III)(edta)(NO(-))](2-).     

Influence of terpyridine as pi-acceptor ligand on the kinetics and mechanism of the reaction of NO with ruthenium(III) complexes

The kinetics of the unusually fast reaction of cis- and trans-[Ru(terpy)(NH3)2Cl]2+ (with respect to NH3; terpy=2,2':6',2"-terpyridine) with NO was studied in acidic aqueous solution. The multistep reaction pathway observed for both isomers includes a rapid and reversible formation of an intermediate Ru(III)-NO complex in the first reaction step, for which the rate and activation parameters are in good agreement with an associative substitution behavior of the Ru(III) center (cis isomer, k1=618 +/- 2 M(-1) s(-1), DeltaH(++) = 38 +/- 3 kJ mol(-1), DeltaS(++) = -63 +/- 8 J K(-1) mol(-1), DeltaV(++) = -17.5 +/- 0.8 cm3 mol(-1); k -1 = 0.097 +/- 0.001 s(-1), DeltaH(++) = 27 +/- 8 kJ mol(-1), DeltaS(++) = -173 +/- 28 J K(-1) mol(-1), DeltaV(++) = -17.6 +/- 0.5 cm3 mol(-1); trans isomer, k1 = 1637 +/- 11 M(-1) s(-1), DeltaH(++) = 34 +/- 3 kJ mol(-1), DeltaS(++) = -69 +/-11 J K(-1) mol(-1), DeltaV(++) = -20 +/- 2 cm3 mol(-1); k(-1)=0.47 +/- 0.08 s(-1), DeltaH(++)=39 +/- 5 kJ mol(-1), DeltaS(++) = -121 +/-18 J K(-1) mol(-1), DeltaV(++) = -18.5 +/- 0.4 cm3 mol(-1) at 25 degrees C). The subsequent electron transfer step to form Ru(II)-NO+ occurs spontaneously for the trans isomer, followed by a slow nitrosyl to nitrite conversion, whereas for the cis isomer the reduction of the Ru(III) center is induced by the coordination of an additional NO molecule (cis isomer, k2=51.3 +/- 0.3 M(-1) s(-1), DeltaH(++) = 46 +/- 2 kJ mol(-1), DeltaS(++) = -69 +/- 5 J K(-1) mol(-1), DeltaV(++) = -22.6 +/- 0.2 cm3 mol(-1) at 45 degrees C). The final reaction step involves a slow aquation process for both isomers, which is interpreted in terms of a dissociative substitution mechanism (cis isomer, DeltaV(++) = +23.5 +/- 1.2 cm3 mol(-1); trans isomer, DeltaV(++) = +20.9 +/- 0.4 cm3 mol(-1) at 55 degrees C) that produces two different reaction products, viz. [Ru(terpy)(NH3)(H2O)NO]3+ (product of the cis isomer) and trans-[Ru(terpy)(NH3)2(H2O)]2+. The pi-acceptor properties of the tridentate N-donor chelate (terpy) predominantly control the overall reaction pattern.     

Mechanistic diversity covering 15 orders of magnitude in rates: cyanide exchange on [M(CN)(4)](2-) (M = Ni, Pd, and Pt)

Kinetic studies of cyanide exchange on [M(CN)(4)](2-) square-planar complexes (M = Pt, Pd, and Ni) were performed as a function of pH by (13)C NMR. The [Pt(CN)(4)](2-) complex has a purely second-order rate law, with CN(-) as acting as the nucleophile, with the following kinetic parameters: (k(2)(Pt,CN))(298) = 11 +/- 1 s(-1) mol(-1) kg, DeltaH(2) (Pt,CN) = 25.1 +/- 1 kJ mol(-1), DeltaS(2) (Pt,CN) = -142 +/- 4 J mol(-1) K(-1), and DeltaV(2) (Pt,CN) = -27 +/- 2 cm(3) mol(-1). The Pd(II) metal center has the same behavior down to pH 6. The kinetic parameters are as follows: (k(2)(Pd,CN))(298) = 82 +/- 2 s(-1) mol(-1) kg, DeltaH(2) (Pd,CN) = 23.5 +/- 1 kJ mol(-1), DeltaS(2) (Pd,CN) = -129 +/- 5 J mol(-1) K(-1), and DeltaV(2) (Pd,CN) = -22 +/- 2 cm(3) mol(-1). At low pH, the tetracyanopalladate is protonated (pK(a)(Pd(4,H)) = 3.0 +/- 0.3) to form [Pd(CN)(3)HCN](-). The rate law of the cyanide exchange on the protonated complex is also purely second order, with (k(2)(PdH,CN))(298) = (4.5 +/- 1.3) x 10(3) s(-1) mol(-1) kg. [Ni(CN)(4)](2-) is involved in various equilibrium reactions, such as the formation of [Ni(CN)(5)](3-), [Ni(CN)(3)HCN](-), and [Ni(CN)(2)(HCN)(2)] complexes. Our (13)C NMR measurements have allowed us to determine that the rate constant leading to the formation of [Ni(CN)(5)](3-) is k(2)(Ni(4),CN) = (2.3 +/- 0.1) x 10(6) s(-1) mol(-1) kg when the following activation parameters are used: DeltaH(2)() (Ni,CN) = 21.6 +/- 1 kJ mol(-1), DeltaS(2) (Ni,CN) = -51 +/- 7 J mol(-1) K(-1), and DeltaV(2) (Ni,CN) = -19 +/- 2 cm(3) mol(-1). The rate constant of the back reaction is k(-2)(Ni(4),CN) = 14 x 10(6) s(-1). The rate law pertaining to [Ni(CN)(2)(HCN)(2)] was found to be second order at pH 3.8, and the value of the rate constant is (k(2)(Ni(4,2H),CN))(298) = (63 +/- 15) x10(6) s(-1) mol(-1) kg when DeltaH(2) (Ni(4,2H),CN) = 47.3 +/- 1 kJ mol(-1), DeltaS(2) (Ni(4,2H),CN) = 63 +/- 3 J mol(-1) K(-1), and DeltaV(2) (Ni(4,2H),CN) = - 6 +/- 1 cm(3) mol(-1). The cyanide-exchange rate constant on [M(CN)(4)](2-) for Pt, Pd, and Ni increases in a 1:7:200 000 ratio. This trend is modified at low pH, and the palladium becomes 400 times more reactive than the platinum because of the formation of [Pd(CN)(3)HCN](-). For all cyanide exchanges on tetracyano complexes (A mechanism) and on their protonated forms (I/I(a) mechanisms), we have always observed a pure second-order rate law: first order for the complex and first order for CN(-). The nucleophilic attack by HCN or solvation by H(2)O is at least nine or six orders of magnitude slower, respectively than is nucleophilic attack by CN(-) for Pt(II), Pd(II), and Ni(II), respectively.     

A mechanistic study of the reaction between a diiron(II) complex [FeII(2)(mu-OH)2(6-Me3-TPA)2](2+) and O2 to form a diiron(III) peroxo complex

A kinetic study of the reaction between a diiron(II) complex [Fe(II)(2)(mu-OH)(2)(6-Me(3)-TPA)(2)](2+) 1, where 6-Me(3)-TPA = tris(6-methyl-2-pyridylmethyl)amine, and dioxygen is presented. A diiron(III) peroxo complex [Fe(III)(2)(mu-O)(mu-O(2))(6-Me(3)-TPA)(2)](2+) 2 forms quantitatively in dichloromethane at temperatures from -80 to -40 degrees C. The reaction is first order in [Fe(II)(2)] and [O(2)], with the activation parameters DeltaH(double dagger) = 17 +/- 2 kJ mol(-1) and DeltaS(double dagger) = -175 +/- 20 J mol(-1) K(-1). The reaction rate is not significantly influenced by the addition of H(2)O or D(2)O. The reaction proceeds faster in more polar solvents (acetone and acetonitrile), but the yield of 2 is not quantitative in these solvents. Complex 1 reacts with NO at a rate about 10(3) faster than with O(2). The mechanistic analysis suggests an associative rate-limiting step for the oxygenation of 1, similar to that for stearoyl-ACP Delta(9)-desaturase, but distinct from the probable dissociative pathway of methane monoxygenase. An eta(1)-superoxo Fe(II)Fe(III) species is a likely steady-state intermediate during the oxygenation of complex 1.     

Activation energy for the disproportionation of HBrO2 and estimated heats of formation of HBrO2 and BrO2

The kinetics of the reaction HBrO(2) + HBrO(2) --> HOBr + BrO(3)(-) + H(+) is investigated in aqueous HClO(4) (0.04-0.9 M) and H(2)SO(4) (0.3-0.9 M) media and at temperatures in the range 15-38 degrees C. The reaction is found to be cleanly second order in [HBrO(2)], with the experimental rate constant having the form k(exp) = k + k'[H(+)]. The half-life of the reaction is on the order of a few tenths of a second in the range 0.01 M < [HBrO(2)](0) < 0.02 M. The detailed mechanism of this reaction is discussed. The activation parameters for kare found to be E(double dagger) = 19.0 +/- 0.9 kJ/mol and DeltaS(double dagger) = -132 +/- 3 J/(K mol) in HClO(4), and E(double dagger) = 23.0 +/- 0.5 kJ/mol and DeltaS(double dagger) = -119 +/- 1 J/(K mol) in H(2)SO(4). The activation parameters for k' are found to be E(double dagger) = 25.8 +/- 0.5 kJ/mol and DeltaS(double dagger) = -106 +/- 1 J/(K mol) in HClO(4), and E(double dagger) = 18 +/- 3 kJ/mol and DeltaS(double dagger) = -130 +/- 11 J/(K mol) in H(2)SO(4). The values Delta(f)H(29)(8)(0)[BrO(2)(aq)] = 157 kJ/mol and Delta(f)H(29)(8)(0)[HBrO(2)(aq)] = -33 kJ/mol are estimated using a trend analysis (bond strengths) based on the assumption Delta(f)H(29)(8)(0)[HBrO(2)(aq)] lies between Delta(f)H(29)(8)(0)[HOBr(aq)] and Delta(f)H(29)(8)(0)[HBrO(3)(aq)] as Delta(f)H(29)(8)(0)[HClO(2)(aq)] lies between Delta(f)H(29)(8)(0)[HOCl(aq)] and Delta(f)H(29)(8)(0)[HClO(3)(aq)]. The estimated value of Delta(f)H(29)(8)(0)[BrO(2)(aq)] agrees well with calculated gas-phase values, but the estimated value of Delta(f)H(29)(8)(0)[HBrO(2)(aq)], as well as the tabulated value of Delta(f)H(29)(8)(0)[HClO(2)(aq)], is in substantial disagreement with calculated gas-phase values. Values of Delta(r)H(0) are estimated for various reactions involving BrO(2) or HBrO(2).     

Towards Binuclear Polyaminocarboxylate MRI Contrast Agents? Spectroscopic and MD Study of the Peculiar Aqueous Behavior of the LnIII Chelates of OHEC (Ln=Eu,Gd, and Tb): Implications for Relaxivity

We report the study of binuclear Ln(III) chelates of OHEC (OHEC=octaazacyclohexacosane-1,4,7,10,14,17,20,23-octaacetate). The interconversion between two isomeric forms, which occurs in aqueous solution, has been studied by NMR, UV/Vis, EPR, and luminescence spectroscopy, as well as by classical molecular dynamics (MD) simulations. For the first time we have characterized an isomerization equilibrium for a Ln(III) polyaminocarboxylate complex (Ln(III)=Y, Eu, Gd and Tb) in which the metal centre changes its coordination number from nine to eight, such that: [Ln(2)(ohec)(H(2)O)(2)](2-) r<==>[Ln(2)(ohec)](2-)+2 H(2)O. The variable temperature and pressure NMR measurements conducted on this isomerization reaction give the following thermodynamic parameters for Eu(III): K(298)=0.42+/-0.01, DeltaH(0)=+4.0+/-0.2 kJ mol(-1), DeltaS(0)=+6.1+/-0.5 J K(-1) mol(-1) and DeltaV(0)=+3.2+/-0.2 cm(3) mol(-1). The isomerization is slow and the corresponding kinetic parameters obtained by NMR spectroscopy are: k(298)(is)=73.0+/-0.5 s(-1), DeltaH++(is)=75.3+/-1.9 kJ mol(-1), DeltaS++(is)= +43.1+/-5.8 J K(-1) mol(-1) and DeltaV++(is)=+7.9+/-0.7 cm(3) mol(-1). Variable temperature and pressure (17)O NMR studies have shown that water exchange in [Gd(2)(ohec)(H(2)O)(2)](2-) is slow, k(298)(ex)=(0.40+/-0.02)x10(6) s(-1), and that it proceeds through a dissociative interchange I(d) mechanism, DeltaV( not equal )=+7.3+/-0.3 cm(3) mol(-1). The anisotropy of this oblong binuclear complex has been highlighted by MD simulation calculations of different rotational correlation times. The rotational correlation time directed on the Gd-Gd axis is 24 % longer than those based on the axes orthogonal to the Gd-Gd axis. The relaxivity of this binuclear complex has been found to be low, since 1) only [Gd(2)(ohec)(H(2)O)(2)](2-), which constitutes 70 % of the binuclear complex, contributes to the inner-sphere relaxivity and 2) the anisotropy of the complex prevents water molecules from having complete access to both Gd(III) cages; this decreases the outer-sphere relaxivity. Moreover, EPR measurements for the Gd(III) and for the mixed Gd(III)/Y(III) binuclear complexes have clearly shown that the two Gd(III) centres interact intramolecularly; this enhances the electronic relaxation of the Gd(III) electron spins.     

Kinetics and mechanism of the interaction of nitric oxide with pentacyanoferrate(II). Formation and dissociation of [Fe(CN)5NO]3 -

The interaction of NO with [Fe(CN)(5)H(2)O](3)(-) (generated by aquation of the corresponding ammine complex) to produce [Fe(CN)(5)NO](3)(-) was studied by UV-vis spectrophotometry. The reaction product is the well characterized nitrosyl complex, described as a low-spin Fe(II) bound to the NO radical. The experiments were performed in the pH range 4-10, at different concentrations of NO, temperatures and pressures. The rate law was first-order in each of the reactants, with the specific complex-formation rate constant, k(f)( )()= 250 +/- 10 M(-)(1) s(-)(1) (25.4 degrees C, I = 0.1 M, pH 7.0), DeltaH(f)() = 70 +/- 1 kJ mol(-)(1), DeltaS(f)() = +34 +/- 4 J K(-)(1) mol(-)(1), and DeltaV(f)() = +17.4 +/- 0.3 cm(3) mol(-)(1). These values support a dissociative mechanism, with rate-controlling dissociation of coordinated water, and subsequent fast coordination of NO. The complex-formation process depends on pH, indicating that the initial product [Fe(CN)(5)NO](3)(-) is unstable, with a faster decomposition rate at lower pH. The decomposition process is associated with release of cyanide, further reaction of NO with [Fe(CN)(4)NO](2)(-), and formation of nitroprusside and other unknown products. The decomposition can be prevented by addition of free cyanide to the solutions, enabling a study of the dissociation process of NO from [Fe(CN)(5)NO](3)(-). Cyanide also acts as a scavenger for the [Fe(CN)(5)](3)(-) intermediate, giving [Fe(CN)(6)](4)(-) as a final product. From the first-order behavior, the dissociation rate constant was obtained as k(d) = (1.58 +/- 0.06) x 10(-)(5) s(-)(1) at 25.0 degrees C, I = 0.1 M, and pH 10.2. Activation parameters were found to be DeltaH(d)() = 106.4 +/- 0.8 kJ mol(-)(1), DeltaS(d)() = +20 +/- 2 J K(-)(1) mol(-)(1), and DeltaV(d)() = +7.1 +/- 0.2 cm(3) mol(-)(1), which are all in line with a dissociative mechanism. The low value of k(d) as compared to values for the release of other ligands L from [Fe(II)(CN)(5)L](n)()(-) suggests a moderate to strong sigma-pi interaction of NO with the iron(II) center. It is concluded that the release of NO from nitroprusside in biological media does not originate from [Fe(CN)(5)NO](3)(-) produced on reduction of nitroprusside but probably proceeds through the release of cyanide and further reactions of the [Fe(CN)(4)NO](2)(-) ion.     

Hydroxylation of phenolic compounds by a peroxodicopper(II) complex: further insight into the mechanism of tyrosinase

The dicopper(I) complex [Cu2(MeL66)]2+ (where MeL66 is the hexadentate ligand 3,5-bis-{bis-[2-(1-methyl-1H-benzimidazol-2-yl)-ethyl]-amino}-meth ylbenzene) reacts reversibly with dioxygen at low temperature to form a mu-peroxo adduct. Kinetic studies of O2 binding carried out in acetone in the temperature range from -80 to -55 degrees C yielded the activation parameters DeltaH1(not equal) = 40.4 +/- 2.2 kJ mol(-1), DeltaS1)(not equal) = -41.4 +/- 10.8 J K(-1) mol(-1) and DeltaH(-1)(not equal) = 72.5 +/- 2.4 kJ mol(-1), DeltaS(-1)(not equal) = 46.7 +/- 11.1 J K(-1) mol(-1) for the forward and reverse reaction, respectively, and the binding parameters of O2 DeltaH degrees = -32.2 +/- 2.2 kJ mol(-1) and DeltaS degrees = -88.1 +/- 10.7 J K(-1) mol(-1). The hydroxylation of a series of p-substituted phenolate salts by [Cu2(MeL66)O2]2+ studied in acetone at -55 degrees C indicates that the reaction occurs with an electrophilic aromatic substitution mechanism, with a Hammett constant rho = -1.84. The temperature dependence of the phenol hydroxylation was studied between -84 and -70 degrees C for a range of sodium p-cyanophenolate concentrations. The rate plots were hyperbolic and enabled to derive the activation parameters for the monophenolase reaction DeltaH(not equal)ox = 29.1 +/- 3.0 kJ mol(-1), DeltaS(not equal)ox = -115 +/- 15 J K(-1) mol(-1), and the binding parameters of the phenolate to the mu-peroxo species DeltaH degrees(b) = -8.1 +/- 1.2 kJ mol(-1) and DeltaS degrees(b) = -8.9 +/- 6.2 J K(-1) mol(-1). Thus, the complete set of kinetic and thermodynamic parameters for the two separate steps of O2 binding and phenol hydroxylation have been obtained for [Cu2(MeL66)]2+.     

Pre-catalyst resting states: a kinetic, thermodynamic and quantum mechanical analyses of [PdCl2(2-oxazoline)2] complexes

The treatment of cold ( approximately 3 degrees C) methanolic solutions of Li(2)PdCl(4) with two equivalents of 2-phenyl-2-oxazoline (Phox) results in the isolation of [PdCl(2)(Phox)(2)] (3). This complex undergoes remarkably slow isomerisation (CHCl(3)-d) at room temperature to a corresponding thermodynamic form. In addition to a theoretical treatment (DFT), the isomerisation behaviour has been analysed both kinetically and thermodynamically. These investigations lead to the conclusion that the initially formed (i.e. kinetic) isomer of 3 is the cis-form which undergoes conversion to the corresponding thermodynamic trans-form via a dissociative (D) mechanism involving loss of a Phox ligand. The activation parameters DeltaS(double dagger) and DeltaH(double dagger) are found to be +304 (+/-3) J K(-1) mol(-1) and +176 (+/-1) kJ mol(-1), respectively and indicate a high barrier to Pd-N bond cleavage under these conditions. The thermodynamic parameters show the expected endothermic nature of this process (+140 +/- 17 kJ mol(-1)) and a slight positive overall entropy (DeltaS degrees = +17 +/- 2 J K(-1) mol(-1)); this latter parameter is presumably due to the formation of the lower dipole moment trans-product when compared to the cis-isomer. Calculated (DFT) values of DeltaG(double dagger) and DeltaH(double dagger) are in excellent agreement to those found experimentally. Further theoretical investigation suggests that two 14-electron three-coordinate T-shaped transition states (i.e., [PdCl(2)(Phox)](double dagger)) are involved; the form pre-disposed to yield the thermodynamic trans-product following re-attachment of the released oxazoline is found to be energetically favoured. The analogous alkyloxazoline system [PdCl(2)(Meox)(2)] (4: Meox = 2-methyl-2-oxazoline) has likewise been investigated. This material gives no indication of cis-trans isomerisation behaviour in solution (NMR) and is shown to exist (X-ray) in the trans-form in the solid-state (as do previously reported crystalline samples of 3). A DFT study of 4 reveals similar values of DeltaS(double dagger) and DeltaH(double dagger) if a D type mechanism were operating to rapidly convert cis- to trans-4. However, a significantly higher thermodynamic stability of the trans-isomer relative to the cis-form is revealed versus similar calculations of the Phox derivative 3. This suggests the possibility that (i) reactions of Meox with Li(2)PdCl(4) may lead directly to the trans-form of [PdCl(2)(Meox)(2)] or alternatively (ii) that alkyloxazoline complexes such as 4 may have a different, and presumably much more rapid, mechanism for isomerisation. The results are placed into the context that isomerisation behaviour, or lack thereof, could play a key preliminary role in later substrate modification. This is due to the fact that [PdX(2)(oxazoline)(2)] compounds are well-known (pre-)catalysts for C-C bond forming chemistry.     

Kinetics of Water Exchange on the Dihydroxo-Bridged Rhodium(III) Hydrolytic Dimer

()()Conventional (18)O isotopic labeling techniques have been used to measure the water exchange rates on the Rh(III) hydrolytic dimer [(H(2)O)(4)Rh(&mgr;-OH)(2)Rh(H(2)O)(4)](4+) at I = 1.0 M for 0.08 < [H(+)] < 0.8 M and temperatures between 308.1 and 323.1 K. Two distinct pathways of water exchange into the bulk solvent were observed (k(fast) and k(slow)) which are proposed to correspond to exchange of coordinated water at positions cis and trans to bridging hydroxide groups. This proposal is supported by (17)O NMR measurements which clearly showed that the two types of water ligands exchange at different rates and that the rates of exchange matched those from the (18)O labeling data. No evidence was found for the exchange of label in the bridging OH groups in either experiment. This contrasts with findings for the Cr(III) dimer. The dependence of both k(fast) and k(slow) on [H(+)] satisfied the expression k(obs) = (k(O)[H(+)](tot) +k(OH)K(a1))/([H(+)](tot) + K(a1)) which allows for the involvement of fully protonated and monodeprotonated Rh(III) dimer. The following rates and activation parameters were determined at 298 K. (i) For fully protonated dimer: k(fast) = 1.26 x 10(-)(6) s(-)(1) (DeltaH() = 119 +/- 4 kJ mol(-)(1) and DeltaS() = 41 +/- 12 J K(-)(1) mol(-)(1)) and k(slow) = 4.86 x 10(-)(7) s(-)(1) (DeltaH() = 64 +/- 9 kJ mol(-)(1) and DeltaS() = -150 +/- 30 J K(-)(1) mol(-)(1)). (ii) For monodeprotonated dimer: k(fast) = 3.44 x 10(-)(6) s(-)(1) (DeltaH() = 146 +/- 4 kJ mol(-)(1) and DeltaS() = 140 +/- 11 J K(-)(1) mol(-)(1)) and k(slow) = 2.68 x 10(-)(6) s(-)(1) (DeltaH() = 102 +/- 3 kJ mol(-)(1) and DeltaS() = -9 +/- 11 J K(-)(1) mol(-)(1)). Deprotonation of the Rh(III) dimer was found to labilize the primary coordination sphere of the metal ions and thus increase the rate of water exchange at positions cis and trans to bridging hydroxides but not to the same extent as for the Cr(III) dimer. Activation parameters and mechanisms for ligand substitution processes on the Rh(III) dimer are discussed and compared to those for other trivalent metal ions and in particular the Cr(III) dimer.     

Solvent tuning of the substitution behavior of a seven-coordinate iron(III) complex

A detailed kinetic study of the substitution behavior of the seven-coordinate [Fe(dapsox)(L)2]ClO4 complex (H(2)dapsox = 2,6-diacetylpyridine-bis(semioxamazide), L = solvent or its deprotonated form) with thiocyanate as a function of the thiocyanate concentration, temperature, and pressure was undertaken in protic (EtOH and acidified EtOH and MeOH) and aprotic (DMSO) organic solvents. The lability and substitution mechanism depend strongly on the selected solvent (i.e., on solvolytic and protolytic processes). In the case of alcoholic solutions, substitution of both solvent molecules by thiocyanate could be observed, whereas in DMSO only one substitution step occurred. For both substitution steps, [Fe(dapsox)(L)2]ClO4 shows similar mechanistic behavior in methanol and ethanol, which is best reflected by the values of the activation volumes (MeOH DeltaV(I) = +15.0 +/- 0.3 cm(3) mol(-1), DeltaV(II) = +12.0 +/- 0.2 cm(3) mol(-1); EtOH DeltaV(I) = +15.8 +/- 0.7 cm(3) mol(-1), DeltaV(II) = +11.1 +/- 0.5 cm(3) mol(-1)). On the basis of the reported activation parameters, a dissociative (D) mechanism for the first substitution step and a D or dissociative interchange (I(d)) mechanism for the second substitution step are suggested for the reaction in MeOH and EtOH. This is consistent with the predominant existence of alcoxo [Fe(dapsox)(ROH)(OR)] species in alcoholic solutions. In comparison, the activation parameters for the substitution of the aqua-hydroxo [Fe(dapsox)(H2O)(OH)] complex by thiocyanate at pH 5.1 in MES were determined to be DeltaH = 72 +/- 3 kJ mol(-1), DeltaS = +38 +/- 11 J K(-1) mol(-1), and DeltaV = -3.0 +/- 0.1 cm(3) mol(-1), and the operation of a dissociative interchange mechanism was suggested, taking the effect of pressure on the employed buffer into account. The addition of triflic acid to the alcoholic solutions ([HOTf] = 10(-3) and 10(-2) M to MeOH and EtOH, respectively) resulted in a drastic changeover in mechanism for the first substitution step, for which an associative interchange (Ia) mechanism is suggested, on the basis of the activation parameters obtained for both the forward and reverse reactions and the corresponding volume profile. The second substitution step remained to proceed through an I(d) or D mechanism (acidified MeOH DeltaV(II) = +9.2 +/- 0.2 cm(3) mol(-1); acidified EtOH DeltaV(II) = +10.2 +/- 0.2 cm(3) mol(-1)). The first substitution reaction in DMSO was found to be slowed by several orders of magnitude and to follow an associative interchange mechanism (DeltaS = -50 +/- 9 J K(-1) mol(-1), DeltaV(I) = -1.0 +/- 0.5 cm(3) mol(-1)), making DMSO a suitable solvent for monitoring substitution processes that are extremely fast in aqueous solution.     

Mechanism for Solvent Exchange on trans-[Os(en)(2)(eta(2)-H(2))S](2+)

Solvent exchange on trans-[Os(en)(2)(eta(2)-H(2))S](2+) (S = H(2)O, CH(3)CN) has been studied in neat solvent as a function of temperature and pressure by (17)O NMR line-broadening and isotopic labeling experiments (S = H(2)O) and by (1)H NMR isotopic labeling experiments (S = CH(3)CN). Rate constants and activation parameters are as follows for S = H(2)O and CH(3)CN, respectively: k(ex)(298) = 1.59 +/- 0.04 and (2.74 +/- 0.03) x 10(-)(4) s(-)(1); DeltaH() = 72.4 +/- 0.5 and 98.0 +/- 1.4 kJ mol(-)(1); DeltaS() = +1.7 +/- 1.8 and +15.6 +/- 4.9 J mol(-)(1) K(-)(1); DeltaV() = -1.5 +/- 1.0 and -0.5 +/- 1.0 cm(3) mol(-)(1). The present investigation of solvent exchange when compared with a previous study on substitution reactions on the same complexes leads to the conclusion that substitution reactions on these compounds undergo an interchange dissociative, I(d), or dissociative, D, reaction mechanism, where solvent dissociation is the rate-limiting step.     

Oxidative reactivity difference among the metal oxo and metal hydroxo moieties: pH dependent hydrogen abstraction by a manganese(IV) complex having two hydroxide ligands

Clarifying the difference in redox reactivity between the metal oxo and metal hydroxo moieties for the same redox active metal ion in identical structures and oxidation states, that is, M(n+)O and M(n+)-OH, contributes to the understanding of nature's choice between them (M(n+)O or M(n+)-OH) as key active intermediates in redox enzymes and electron transfer enzymes, and provides a basis for the design of synthetic oxidation catalysts. The newly synthesized manganese(IV) complex having two hydroxide ligands, [Mn(Me(2)EBC)(2)(OH)(2)](PF(6))(2), serves as the prototypic example to address this issue, by investigating the difference in the hydrogen abstracting abilities of the Mn(IV)O and Mn(IV)-OH functional groups. Independent thermodynamic evaluations of the O-H bond dissociation energies (BDE(OH)) for the corresponding reduction products, Mn(III)-OH and Mn(III)-OH(2), reveal very similar oxidizing power for Mn(IV)O and Mn(IV)-OH (83 vs 84.3 kcal/mol). Experimental tests showed that hydrogen abstraction proceeds at reasonable rates for substrates having BDE(CH) values less than 82 kcal/mol. That is, no detectable reaction occurred with diphenyl methane (BDE(CH) = 82 kcal/mol) for both manganese(IV) species. However, kinetic measurements for hydrogen abstraction showed that at pH 13.4, the dominant species Mn(Me(2)EBC)(2)(O)(2), having only Mn(IV)O groups, reacts more than 40 times faster than the Mn(IV)-OH unit in Mn(Me(2)EBC)(2)(OH)(2)(2+), the dominant reactant at pH 4.0. The activation parameters for hydrogen abstraction from 9,10-dihydroanthracene were determined for both manganese(IV) moieties: over the temperature range 288-318 K for Mn(IV)(OH)(2)(2+), DeltaH(double dagger) = 13.1 +/- 0.7 kcal/mol, and DeltaS(double dagger) = -35.0 +/- 2.2 cal K(-1) mol(-1); and the temperature range 288-308 K for for Mn(IV)(O)(2), DeltaH(double dagger) = 12.1 +/- 1.8 kcal/mol, and DeltaS(double dagger) = -30.3 +/- 5.9 cal K(-1) mol(-1).     

Nitrogen-14 NMR Study on Solvent Exchange of the Octahedral Cobalt(II) Ion in Neat 1,3-Propanediamine and n-Propylamine at Various Temperatures and Pressures. Tetrahedral-Octahedral Equilibrium of the Solvated Cobalt(II) Ion in n-Propylamine As Studied by EXAFS and Electronic Absorption Spectroscopy

Solvated cobalt(II) ions in neat 1,3-propanediamine (tn) and n-propylamine (pa) have been characterized by electronic absorption spectroscopy and extended X-ray absorption fine structure (EXAFS) spectroscopy. The equilibrium between tetrahedral and octahedral geometry for cobalt(II) ion has been observed in a neat pa solution, but not in neat diamine solutions such as tn and ethylenediamine (en). The thermodynamic parameters and equilibrium constant at 298 K for the geometrical equilibrium in pa were determined to be DeltaH degrees = -36.1 +/- 2.3 kJ mol(-1), DeltaS degrees = -163 +/- 8 J mol(-1) K(-1), and K(298) = 6.0 x 10(-3) M(-2), where K = [Co(pa)(6)(2+)]/{[Co(pa)(4)(2+)][pa](2)}. The equilibrium is caused by the large entropy gain in formation of the tetrahedral cobalt(II) species. The solvent exchange of cobalt(II) ion with octahedral geometry in tn and pa solutions has been studied by the (14)N NMR line-broadening method. The activation parameters and rate constants at 298 K for the solvent exchange reactions are as follows: DeltaH() = 49.3 +/- 0.9 kJ mol(-1), DeltaS() = 25 +/- 3 J mol(-1) K(-1), DeltaV() = 6.6 +/- 0.3 cm(3) mol(-1) at 302.1 K, and k(298) = 2.9 x 10(5) s(-1) for the tn exchange, and DeltaH() = 36.2 +/- 1.2 kJ mol(-1), DeltaS() = 35 +/- 6 J mol(-1) K(-1), and k(298) = 2.0 x 10(8) s(-1) for the pa exchange. By comparison of the activation parameters with those for the en exchange of cobalt(II) ion, it has been confirmed that the kinetic chelate strain effect is attributed to the large activation enthalpy for the bidentate chelate opening and that the enthalpic effect is smaller in the case of the six-membered tn chelate compared with the five-membered en chelate.     

The OH* + CH3SH reaction: support for an addition-elimination mechanism from ab initio calculations

Several intermediates for the CH(3)SH + OH(*) --> CH(3)S(*) + H(2)O reaction were identified using MP2(full) 6-311+g(2df,p) ab initio calculations. An adduct, CH(3)S(H)OH(*), I, with electronic energy 13.63 kJ mol(-1) lower than the reactants, and a transition state, II(double dagger), located 5.14 kJ mol(-1) above I, are identified as the entrance channel for an addition-elimination reaction mechanism. After adding zero-point and thermal energies, DeltaH(r,298) ( degrees )(reactants --> I) = -4.85 kJ mol(-1) and DeltaH(298) (double dagger)(I --> II(double dagger)) = +0.10 kJ mol(-1), which indicates that the potential energy surface is broad and flat near the transition state. The calculated imaginary vibrational frequency of the transition state, 62i cm(-1), is also consistent with an addition-elimination mechanism. These calculations are consistent with experimental observations of the OH(*) + CH(3)SH reaction that favored an addition-elimination mechanism rather than direct hydrogen atom abstraction. An alternative reaction, CH(3)SH + OH(*) --> CH(3)SOH + H(*), with DeltaH(r,298) ( degrees ) = +56.94 kJ mol(-1) was also studied, leading to a determination of DeltaH(f,298) ( degrees )(CH(3)SOH) = -149.8 kJ mol(-1).     

A detailed mechanistic study of the substitution behavior of an unusual seven-coordinate iron(III) complex in aqueous solution

A detailed mechanistic study of the substitution behavior of a 3d metal heptacoordinate complex, with a rare pentagonal-bipyramidal structure, was undertaken to resolve the solution chemistry of this system. The kinetics of the complex-formation reaction of [Fe(dapsox)(H(2)O)(2)]ClO(4) (H(2)dapsox = 2,6-diacetylpyridine-bis(semioxamazide)) with thiocyanate was studied as a function of thiocyanate concentration, pH, temperature, and pressure. The reaction proceeds in two steps, which are both base-catalyzed due to the formation of an aqua-hydroxo complex (pK(a1) = 5.78 +/- 0.04 and pK(a2) = 9.45 +/- 0.06 at 25 degrees C). Thiocyanate ions displace the first coordinated water molecule in a fast step, followed by a slower reaction in which the second thiocyanate ion coordinates trans to the N-bonded thiocyanate. At 25 degrees C and pH <4.5, only the first reaction step can be observed, and the kinetic parameters (pH 2.5: k(f(I)) = 2.6 +/- 0.1 M(-1) s(-1), DeltaH(#)(f(I)) = 62 +/- 3 kJ mol(-1), DeltaS(#)(f(I)) = -30 +/- 10 J K(-1) mol(-1), and DeltaV(#)(f(I)) = -2.5 +/- 0.2 cm(3) mol(-1)) suggest the operation of an I(a) mechanism. In the pH range 2.5 to 5.2 this reaction step involves the participation of both the diaqua and aqua-hydroxo complexes, for which the complex-formation rate constants were found to be 2.19 +/- 0.06 and 1172 +/- 22 M(-1) s(-1) at 25 degrees C, respectively. The more labile aqua-hydroxo complex is suggested to follow an I(d) or D substitution mechanism on the basis of the reported kinetic data. At pH > or =4.5, the second substitution step also can be monitored (pH 5.5 and 25 degrees C: k(f(II)) = 21.1 +/- 0.5 M(-1) s(-1), DeltaH(#)(f(II)) = 60 +/- 2 kJ mol(-1), DeltaS(#)(f(II)) = -19 +/- 6 J K(-1) mol(-1), and DeltaV(#)(f(II)) = +8.8 +/- 0.3 cm(3) mol(-1)), for which an I(d) or D mechanism is suggested. The results are discussed in terms of known structural parameters and in comparison to relevant structural and kinetic data from the literature.     

Equilibrium, kinetic and solvent effect studies on the reactions of [RuIII(Hedta)(H2O)] with thiols

The interaction of [Ru(III)(edta)(H(2)O)](-) with a series of selected thiols having extra functional groups was investigated potentiometrically and kinetically. The pK(a) values of the uncoordinated carboxylic acid group and coordinated water molecule are 3.12 and 7.41, respectively, in aqueous solution at 25 degrees C and 0.1 M ionic strength. The formation constants of the complexes were determined in the pH range 3-9, and the concentration distribution of the various complex species was evaluated as a function of pH. The effect of dioxane on the pK(a) values of [Ru(III)(Hedta)(H(2)O)] and the formation constants of the corresponding thiol complexes is presented. The study also provides mechanistic information on the reaction of [Ru(III)(edta)(H(2)O)](-) with the thiols. The low values of DeltaH(not equal) and negative values of DeltaS(not equal) and DeltaV(not equal) for the substitution reactions of [Ru(III)(edta)(H(2)O)](-) clearly support the associative character of the substitution process.     

Guest exchange dynamics in an M4L6 tetrahedral host

Guest exchange in an M(4)L(6) supramolecular assembly was previously demonstrated to proceed through a nonrupture mechanism in which guests squeeze through apertures in the host structure and not through larger portals created by partial assembly dissociation. Focusing on the [Ga(4)L(6)](12-) assembly [L = 1,5-bis(2',3'-dihydroxybenzamido)naphthalene], the host-guest kinetic behavior of this supramolecular capsule is defined. Guest self-exchange rates at varied temperatures and pressures were measured to determine activation parameters, revealing negative DeltaS and positive DeltaV values [PEt(4)(+): DeltaH = 74(3) kJ mol(-1), DeltaS = -46(6) J mol(-1) K(-1), k(298) = 0.003 s(-)); NEt(4)(+): DeltaH = 69(2) kJ mol(-1), DeltaS = -52(5) J mol(-1) K(-1), k(298) = 0.009 s(-1); NMe(2)Pr(2)(+): DeltaH = 52(2) kJ mol(-1), DeltaS = -56(7) J mol(-1) K(-1), DeltaV = +13(1) cm(3) mol(-1), k(298) = 4.4 s(-1); NPr(4)(+): DeltaH = 42(1) kJ mol(-1), DeltaS = -102(4) J mol(-1) K(-1), DeltaV = +31(2) cm(3) mol(-1), k(298) = 1.4 s(-1)]. In PEt(4)(+) for NEt(4)(+) exchange reactions, egress of the initial guest (G1) is found to be rate determining, with increasing G1 and G2 (the displacing guest) concentrations inhibiting guest exchange. This inhibition is explained by the decreased flexibility of the host imparted by exterior, or exohedral, guest interactions by both the G1 and G2 guests. Blocking the exohedral host sites with high concentrations of the smaller NMe(4)(+) cation (a weak endohedral guest) enhances PEt(4)(+) for NEt(4)(+) guest exchange rates. Finally, guest displacement reactions also demonstrate the sensitivity of guest exchange to thermodynamic endohedral guest binding affinities. When the initial guest (G1) has a weaker affinity for the host, G2 concentration dependence is observed in addition to dependence on the G2 binding strength.     

The rate of O2 and CO binding to a copper complex, determined by a "flash-and-trap" technique, exceeds that for hemes

The observation and fast time-scale kinetic determination of a primary dioxygen-copper interaction have been studied. The ability to photorelease carbon monoxide from [Cu(I)(tmpa)(CO)](+) in mixtures of CO and O(2) in tetrahydrofuran (THF) between 188 and 218 K results in the observable formation of a copper-superoxide species, [Cu(II)(tmpa)(O(2)(-))](+) lambda(max) = 425 nm. Via this "flash-and-trap" technique, temperature-dependent kinetic studies on the forward reaction between dioxygen and [Cu(I)(tmpa)(thf)](+) afford activation parameters DeltaH = 7.62 kJ/mol and DeltaS = -45.1 J/mol K. The corresponding reverse reaction proceeds with DeltaH = 58.0 kJ/mol and DeltaS = 105 J/mol K. Overall thermodynamic parameters are DeltaH degrees = -48.5 kJ/mol and DeltaS degrees = -140 J/mol K. The temperature-dependent data allowed us to determine the room-temperature second-order rate constant, k(O2) = 1.3 x 10(9) M(-1) s(-1). Comparisons to copper and heme proteins and synthetic complexes are discussed.