NOVEL HYPERBRANCHED POLY（PHENYLENE OXIDE）S WITH PHENOLIC TERMINAL GROUPS： EFFECTS OF REACTION TIME AND CORE MOLECULES ON THE MOLECULAR WEIGHT AND POLYDISPERSITY

A novel hyperbranched poly（phenylene oxide） （HPPO） with phenolic terminal groups was prepared from 4-bromo-4＇,4＂-dihydroxytriphenylmethane as AB2 monomer in dimethylsulfoxide （DMSO） via a modified Ullmann reaction. The molecular weight and polydispersity （PD） of the resulting polymers increased with increasing reaction time. In the presence of core molecules （bisphenol A and 1,3,5-trihydroxybenzene）, which have the similar molecular backbones to the reactive monomer, the molecular weight could be controlled by varying the core-to-monomer ratio. Incorporation of a very small amount of core molecules could lead to a higher molecular weight as compared with that without the addition of core molecules. However, when the core content reached certain extent, the molecular weight would decrease with the further increase in the core content. A new similar behavior of control over the PD was also obtained. The resulting polymers were characterized by ^1H-NMR, ^13C-NMR, FT-IR, and GPC.     

SYNTHESIS, CHARACTERIZATION AND NANOPARTICLE FORMATION OF STAR-SHAPED POLY(L-LACTIDE) WITH SIX ARMS

Well-defined star-shaped poly(L-lactide)with six arms(sPLLA)was synthesized via the ring-opening polymerization of L-lactide using dipentaerythritol as initiator and stannous octoate as catalyst in bulk at 125~C.The effects of molar ratios of both monomer to initiator and monomer to catalyst on the molecular weights of as-synthesized sPLLA polymers were in detail investigated.The molecular weights of sPLLA polymers linearly increased with the molar ratio of monomer to initiator,and the molecular weight d...     

Photo-induced Synthesis and Characterization of Poly（methyl methacrylate） Grafted Sodium Salt of Partially Carboxymethylated Guar Gum

Photo-induced graft copolymerization of methyl methacrylate（MMA） onto sodium salt of partially carboxymethylated guar gum（Na-PCMGG, DS = 0.291） was carried out in an aqueous medium using ceric ammonium nitrate（CAN） as photoinitiator to synthesize a novel graft copolymer, Na-PCMGG-g-PMMA, which may find its potential application as a metal adsorbent. The influences of synthesis variables such as concentrations of photoinitiator（CAN）, nitric acid and monomer（MMA） as well as reaction time, temperature and amount of substrate on the grafting yields were studied and the reaction conditions for optimum photo-grafting were evaluated. At optimum concentration, the maximum values of the grafting yields achieved were G = 271.61% and GE = 63.89%. The experimental results were found to be in very good agreement with the proposed kinetic scheme. The photo-graft copolymerization of MMA onto Na-PCMGG（ DS = 0.291） was also carried out in the presence and absence of ultraviolet radiation for studying the efficiency of the photoinitiator. The influence of carboxymethyl groups introduced onto the guar gum molecules with regard to its behavior towards ultra-violet radiation induced grafting with MMA was also investigated. Photo-grafting process was confirmed and the products were characterized with the help of the spectroscopic（1H-NMR and FTIR） and SEM techniques.     

NOVEL AMPHIPHILIC FLUORESCENT GRAFT COPOLYMER： SYNTHESIS, CHARACTERIZATION AND ENCAPSULATION OF A HYDROPHOBIC AGENT

Novel amphiphilic fluorescent graft copolymer （PVP-PyAHy） was successfully synthesized by the free radical copolymerization of hydrophobic monomer N-（1-pyrenebutyryl）-N＇-acryloyl hydrazide （PyAHy） with hydrophilic precursor polymers of vinyl-functionalized poly（N-vinylpyrrolidone） （PVP） in DMF. The copolymer is amphiphilic and has intrinsic fluorescence. FT-IR, ^1H-NMR, TEM, gel permeation chromatography-multi-angle laser light scattering, UV-Vis spectroscopy and fluorescence spectroscopy were used to characterize this copolymer. The TEM observation shows that the copolymer PVP-PyAHy forms micelles in aqueous solution. Results of fluorometric measurements illustrate that the critical micelle concentration （CMC） value of PVP-PyAHy in aqueous solution is about 0.90 mg/mL. To examine the encapsulation ability of the copolymer in aqueous media, methyl yellow was employed as a model hydrophobic agent. The loading level of the polymer to methyl yellow is 8.8 mg/g. The cytotoxicity assays for Madin Darby Canine Kidney （MDCK） cells shows good biocompatibility of PVP-PyAHy in vitro. These results suggest the potential of this copolymer PVP-PyAHy as drugs delivery carrier and fluorescent tracer.     

REVERSE ATOM TRANSFER RADICAL POLYMERIZATION OF STYRENE WITH COPPER-BASED CATALYST

 "Living"/controlled radical polymerization of styrene was carried out with diethyl 2,3-dicyano-2,3-diphenylsuccinate (DCDPS)/CuCl₂/bipyridine (bipy) initiation system at 120℃. The molecular weights of resultant PSt increased with the monomer conversion and the polydispersities were in the range of 1.37 ～ 1.52. A linear ln([M]o/[M])versus time plot was also obtained indicating the constant concentration of growing radicals during the polymerization with this initiation system. End group analysis by ¹H-NMR spectroscopic studies showed that the end groups of the polymer obtained is cω-functionalized by a chlorine group from the catalyst and a-functionalized by a (carbethoxy-cyano-phenyl)methyl group from the fragments of the initiator. Having C1 atom at the chain end, the PSt obtained can be used as a macroinitiator to promote a chain-extension reaction with fresh St and block copolymerization reaction with a second monomer, such as methyl methacrylate, in the presence of CuC1/bipy catalyst via a conventional ATRP process.     

生物相容性BAB型两亲嵌段共聚物的合成及其自组装

Lys(z)-NCA was synthesized in the presence of triphosgene, amphiphilic triblock copolymers poly(N^c-CBZ-Lysine)-PEG-poly(N^c-CBZ-Lysine) were synthesized in DMF using amino-end ended PEG as initiator with the mechanism of anion ring opening polymerization. The structures of block copolymers were characterized by IR, ^1H-NMR,GPC and DSC. The results showed triblock copolymers with expected structure and low polydispersity in molecular weight could be synthesized by this method. At the same time, the self-assembling behaviors of block copolymer were investigated by TEM. A novel helical aggregates were found to be formed in DMF. Because of biocompatibility of two components of block copolymers, these block copolymers have potential applications in the field of biomaterials.     

PREPARATION OF POLY （LACTIC ACID） THROUGH THIONYL CHLORIDE ACTIVATED POLYCONDENSATION

A two-step process was used to synthesize the high molecular weight poly (lactic acid) using thionyl chloride as an activator for the polycondensation of prepolymer of lactic acid.The products were characterized by GPC,DSC and 1H-NMR.Poly(L-lactic acid)(PLLA) with molecular weight Mw:32875 was obtained when thionyl chloride was used.while low molecular weight PLLA MW:7350 was yielded without thionyl chloride.Effects of the concentration of thionyl chloride,polymerization time and bases on the molecular weight of poly(lactic acid) were investigated.In DSC scans the glass transition temperatures(Tg)of the resulting polymers varied from 25.3 to 57.6℃.and the Tg of poly(L-lactic acid)was higher than that of poly (D,L0lactic acid)(PDLLA).The melting points of poly(L-lactic acid)and poly (D,L-lactic acid) could not be found unless the polymers were obtained by thionyl chloride activator.     

Synthesis of Liquid Crystalline Polymers with Side Chains

The present paper covers the synthesis and characterization of several intermediate products, monomer, and polymers. 3-{ 2-[ 4-( 4-Nitrophenylazo ) phenoxy] ethyloxycarbonyl} propanoyloxy (2-hydroxy) propyl acrylate (4) was prepared by the ring-opening reaction of glycidyl acrylate with the monoester of succinic acid (3). The polymers (5) with different molecular weights were prepared by the free-radical polymerization. The polymers (5) had liquid crystalline behavior without decomposition as revealed by DSC, optical microscope.     

Effect of Molecular Weight on the Properties of Poly（butylene succinate）

Poly（butylene succinate） （PBS） with different molecular weight was synthesized from 1, 4-butanediol and succinic acid by direct melt condensation. The synthesized PBS was identified by IH-NMR and FTIR spectrometry. The molecular weight was calculated from the intrinsic viscosity, and its value was between 20000 and 70000. The crystallization behavior and crystal morphology as function of molecular weight were investigated by DSC and PLM, respectively. The mechanical properties and hydrolytic degradation behaviors related with change of molecular weight were also studied in this work. The results demonstrated that the properties of PBS were determined by both molecular weight and crystallization properties （crystallinity as well as crystal morphology）. Our work is important for the design and preparation of PBS with proper molecular weight for its practical application.     

MECHANISM FOR THE INITIATION OF ACRYLONITRILE POLYMERIZATION BY POLYPROPYLENE-BASED POLYAMIDOXIME-THIOUREA COMBINATION

Polymerization of acrylonitrile (AN) in aqueous nitric acid initiated by polypropylene-based polyamidoxime (PPAO)-thiourea (TU) combination has been investigated. The overall rate of polymerization (R_p) under the conditions of [TU]/[PPAO]<0.5 molar ratio isThe molecular weights of the polymers were found to be inversely proportional to 3/2-power of nitric acid concentration and 1-power of thiourea concentration. In addition, it is independent with the concentrations of monomer and PPAO, and decreases with increasing temperature.On the basis of these experimental results, a coordination-proton transfer mechanism for the initiation was proposed and discussed.     

二步法聚丙烯/丙烯酸表面接枝聚合研究

研究了二步法聚丙烯膜表面的丙烯酸接枝反应 .实验发现 ,以醋酐为溶剂的反应体系所得接枝率明显好于以水为溶剂的体系 ;接枝率随光敏剂浓度、单体浓度增大而增加 ;提高反应温度 ,可使接枝率明显增大 ;接枝后的聚丙烯膜表面亲水性可明显改善 .并用红外光谱证实了丙烯酸在聚丙烯膜表面的接枝 .     

One-Step Synthesis of Triblock Copolymers via Simultaneous Reversible-Addition Fragmentation Chain Transfer (RAFT) and Ring-Opening Polymerization Using a Novel Difunctional Macro-RAFT Agent Based on Polyethylene Glycol

One-step synthesis of the triblock copolymers was carried out by reversible addition–fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) and ring-opening polymerization (ROP) of β-butyrolactone (BL) or ?-caprolactone (CL) using a novel difunctional macro-RAFT agent. For this purpose, primarily PEG-Br (polyethylene glycol bromine) was obtained by using 3-bromopropanoyl chloride and PEGs (polyethylene glycols) with different molecular weights. Then, macro-RAFT agent was synthesized by the reaction of potassium ethyl xanthogenate and PEG-Br. By using macro-RAFT agent, poly(MMA-b-EG-b-BL), and poly(MMA-b-EG-b-CL) triblock copolymers were synthesized by changing some polymerization conditions such as monomer/initiator concentration, polymerization time. The effect of the reaction conditions on the polydispersity and molecular weights were also investigated. The block lengths of the triblock copolymers were calculated by using ¹H-nuclear magnetic resonance (¹H-NMR) spectra. It was observed that the block length could be altered by varying the monomer and initiator concentrations. The characterization of the products were achieved using ¹H-NMR, Fourier-transform infrared spectroscopy (FTIR), gel-permeation chromatography (GPC), thermogravimetric analysis (TGA), and fractional precipitation (γ) techniques.     

对苯二胺和均苯三酸及对氨基苯甲酸制备可溶性芳香聚酰胺共聚物的研究

分别通过一步加料和分步加料的方法,以对苯二胺(A2)、均苯三酸(B3)和对氨基苯甲酸(AB)为原料进行溶液缩聚反应,制备了具有良好溶解性的芳香聚酰胺共聚物.产物的结构通过IR、1H-NMR得到证实.采用IR和1H-NMR对一步加料共聚反应的共聚行为进行研究,并初步考察了3种不同单体对反应的影响.     

Anionic graft polymerization of methacrylonitrile on potassium starch alkoxide

The anionic graft polymerization of methacrylonitrile on potassium starch alkoxide in dimethyl sulfoxide was studied. Factors affecting the graft polymerization such as monomer and alkoxide concentrations as well as temperature were investigated. The yield of the graft polymers was found to increase with alkoxide concentration, and it was possible to incorporate all the starch into graft polymer. On increasing the monomer concentration the graft polymer yield increased to a flat maximum. At the higher monomer concentrations, the efficiency of monomer in giving graft polymer decreased due to increased homopolymer formation. The composition of the graft polymers varied with increasing monomer concentration, graft polymers having about 40–65% of grafted starch were obtained. With increasing temperature (10 to 60°C), the yield of graft polymer decreased, there was more homopolymerization, but the amount of starch incorporated in the graft remained constant. The structure of the graft polymers was deduced from hydrolysis of the starch backbone of the graft polymers by dilute mineral acid and the determination of the molecular weights of the grafted side chains, and from oxidation by periodic acid, which showed the extent of grafting at the secondary hydroxyl groups. These results have shown that by anionic graft polymerization it is possible to obtain graft polymers having more densely packed grafted side chains of relatively low molecular weights than those obtained previously by free-radical graft polymerization.     

Visible light‐induced living surface grafting polymerization for the potential biological applications

A novel visible light‐induced living surface grafting polymerization was developed by a strategy in which isopropyl thioxanthone (ITX) was first photoreduced under UV light and sequentially coupled onto the surface of polymeric substrates, and the produced isopropyl thioxanthone‐semipinacol (ITXSP) “dormant” groups were subsequently reactivated under visible light to initiate a surface grafting polymerization. By using glycidyl methacrylate (GMA) and low‐density polyethylene (LDPE) films as models, a “living” surface grafting polymerization initiated by ITXSP under visible light at room temperature was observed. Both the surface grafting chain length versus grafting conversion of monomer and the grafting polymerization rate versus monomer concentration demonstrated a linear dependence, which is in accord with the known characteristics of living polymerization. The livingness rendered it possible to accurately control the thickness of the grafted layer by simply altering the irradiation time. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Phys, 2009     

SYNTHESIS AND CHARACTERIZATION OF HYPERBRANCHED VINYL POLYMERS FROM RAFT POLYMERIZATION OF AN ASYMMETRIC DIVINYL MONOMER

Hyperbranched vinyl polymers were prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization of a styrenic asymmetric divinyl monomer.This was achieved by using cumyl dithiobenzoate or S-dodecyl-S′- (α,α′-dimethyl-α″-acetic acid)trithiocarbonate as the chain transfer agent,1,1′-azobis(cyclohexanecarbonitrile) or thermal initiation as a source of radicals.Cross-linking was inhibited by a rapid RAFT-based equilibrium between active propagation chains and dormant species,and thus a h...     

偶氮苯侧链结构对聚丙烯酸酯三阶非线性光学性能影响

设计合成了一系列含偶氮苯非线性生色团的丙烯酸酯,并采用溶液聚合法合成了功能化的聚丙烯酸酯,利用FTIR、NMR、UV等对化合物的结构进行了表征,证实得到了指定结构的化合物.利用Z扫描技术对合成的聚丙烯酸酯的非线性光学性能进行了研究,通过对聚合物的非线性光学吸收拟合,计算得到非线性吸收系数β和三阶非线性系数χ(3),并探讨了取代基生色团分子结构与高分子三阶非线性光学性能的关系,结果显示增大侧链生色团π电子离域长度或强DπA(推拉基团)结构均可有效提高聚合物的三阶非线性光学性能.     

Water-soluble ABC triblock copolymers based on vinyl ethers: Synthesis by living cationic polymerization and solution characterization

Water-soluble ABC triblock copolymers of methyl vinyl ether (MVE), ethyl vinyl ether (EVE), and methyl tri(ethylene glycol) vinyl ether (MTEGVE) of various block sequences and carrying 20 monomer units in each block were synthesized by living cationic polymerization. In addition to the triblocks, one AB diblock, one BA diblock, and one statistical copolymer of MVE and MTEGVE carrying 20 units of each type of monomer were synthesized as controls. Moreover, three homopolymers each carrying 20 units of MVE and end groups of varying hydrophobicity were synthesized using three different initiators. The molecular weights and molecular weight distributions of all the polymers were determined by gel permeation chromatography (GPC) in tetrahydrofuran (THF). The number average degrees of polymerization (DP_ns) and composition of all the polymers were calculated by proton nuclear magnetic resonance (¹H-NMR) spectroscopy. The molecular weights and degrees of polymerization corresponded to the values expected from the monomer/initiator ratios. The calculated polydispersities were reasonably narrow at 1.3. Aqueous GPC studies at room temperature on the triblock copolymers showed that the polymers exist as isolated chains (unimers) in solution but they tend to assemble and form micelles in the presence of a sufficiently high salt concentration apparently due to the insolubility of the EVE units under the latter conditions. Triblocks with a different block sequence exhibited a different susceptibility to salt-induced micellization, as indicated by the retention volume of the micelles and the relative micelle/unimer peak areas. Similarly, the cloud points of the triblock copolymers covered a relatively wide temperature range from 56 to 72°C. These differences in micellization and cloud points suggest a profound effect of the location of the hydrophilic MTEGVE block on copolymer association. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 1181–1195, 1997     

Synthesis and properties of polyurethane elastomers crosslinked with amine-terminated AB2-type hyperbranched polyamides

Amine-terminated AB₂-type hyperbranched polyamides of different molecular weights were prepared from 3,5-bis-(4-aminophenoxy)benzoic acid (AB₂ monomer) by fractional precipitation technique and characterized by FTIR, ¹H-NMR spectroscopies, DSC and GPC techniques. The degree of branching (DB) of hyperbranched polymers (HBP) was determined using ¹³C-NMR spectroscopy and it was found that the value increased with decrease in molecular weight of polymer considered. As the molecular weight distribution was narrow, the approximate number of end functional groups of each HBP was conveniently calculated. Three polymers were selected and used as crosslinkers in the preparation of polyurethanes. The incorporation of hyperbranched polyamide into the polyurethane chains was confirmed using FTIR and ¹H-NMR spectroscopic techniques. Among the range studied (1-6%), it was found that high tensile strength is attained with 1% of HBP. It was also found that the tensile strength decreases with increase in number of end functional groups and decrease in DB of HBP. However, glass transition temperatures and thermal stability of polyurethanes crosslinked with up to 6% of HBP, above which gelation occurred, were not affected and similar to the blank polymer prepared without AB₂ polymer.