Key factors in electromembrane microextraction systems for metals analysis in natural waters

ABSTRACT

Application of an electric potential to hollow fibre liquid phase microextraction (HF-LPME) systems previously optimised for metals preconcentration from natural waters could improve their analytical performance increasing enrichment factors and reducing operation times. Nevertheless, the effectiveness of the direct application of an electric potential to these systems may be limited due to the effects produced by other operational parameters.

In this work, the effect of a variable electric potential on the enrichment factors of four HF-LPME systems used for the analysis of trace metals in natural waters (Cd, Ni, Ag and Cu) has been studied. In addition, the effect of organic phase composition, distance between electrodes and electrodes diameter has been also studied. From the results obtained, composition of organic phase can be considered as the key factor in electromembrane (EME) systems, since its polarity determine the operational range of the applied electric potential and consequently the enrichment factor that could be achieved.

EMEs have demonstrated to be a real alternative to preconcentrate Cd, Ag and Cu from natural water samples in very short times (30 min). In fact, enrichment factors increased up to one order of magnitude if compared with HF-LPME methodology without application of an electrical potential.     

Solid phase microextraction as a tool for trace element speciation

Applications of solid phase microextraction (SPME) for trace element speciation are reviewed. Because of the relative novelty of the technique in the inorganic analytical field, the first part of this review provides a short overview of the principles of SPME operation; the second part describes typical SPME applications to elemental speciation. Volatile organometallic compounds can be collected by SPME from the sample headspace or liquid phase, directly or after derivatization. The usual separation method for the collected volatile species is gas chromatography. Non-volatile analyte species can be collected from the sample liquid phase and separated by liquid chromatography or capillary electrophoresis. Currently, most SPME applications in the inorganic field comprise analyte ethylation and headspace extraction followed by gas chromatographic separation of tin, lead and mercury species. The use of SPME for the study of equilibria in complex systems is also discussed and future roles of solid phase microextraction in the inorganic analytical field are raised.     

Analysis of carbamate pesticides in water samples using single-drop microextraction and gas chromatography–mass spectrometry

Single-drop microextraction (SDME) followed by gas chromatography–mass spectrometry detection was used for the determination of some carbamate pesticides in water samples. The studied pesticides were thiofanox, carbofuran, pirimicarb, methiocarb, carbaryl, propoxur, desmedipham and phenmedipham. Two alternative sample introduction methods have been examined and compared; SDME followed by cool on-column injection (without derivatization) and SDME followed by in-microvial derivatization and splitless injection. Acetic anhydride was used as derivatization reagent. Parameters that affect the derivatization reaction yield and the extraction efficiency of the SDME method were studied and optimized. The analytical performances and possible applications of both approaches were investigated. Relative standard deviations for the studied compounds ranged from 3.2 to 8.3%. The detection limits obtained by the derivatization method were found to be in the range 3–35 ng/L. Using cool on-column injection (without derivatization), the detection limits were between 30 and 80 ng/L.     

Analytical applications of photoinduced chemiluminescence in flow systems--a review

In this review, the recent evolution and the state of the art of photochemical reactions coupled with chemiluminescence processes are presented. Different chemiluminescence systems have been considered together with suitable photochemical derivatization processes that can affect either the analyte of interest or even the chemiluminogenic reagent, producing some derivatives able to participate more efficiently in the CL reactions and enhancing the CL emission. The on-line integration of the photochemical reactions as well as the coupling of this resulting photoinduced chemiluminescence (PICL) method with dynamic analytical systems, such as flow injection analysis, liquid or gas chromatography and capillary electrophoresis, have been discussed. Important applications of PICL have been proposed in environmental, pharmaceutical and food analysis.     

Critical review on recent developments in solventless techniques for extraction of analytes

The most recent contributions on solventless extraction techniques have been reviewed. This paper deals with those techniques that use solid phases, such as solid-phase microextraction, liquid phases, such as single-drop microextraction and hollow-fibre liquid-phase microextraction, and subcritical fluids, such as subcritical water extraction. In all cases, the most recent publications have been critically studied. Direct extraction and derivatization processes to facilitate the extraction of analytes in different areas have been included. Hyphenated approaches, if available, are also included in this review. Comparison of techniques organized by analytes and matrices also enhances this critical overview of solventless techniques.     

Single-drop microextraction technique for the determination of antibiotics in environmental water

Growing concerns related to antibiotic residues in environmental water have encouraged the development of rapid, sensitive, and accurate analytical methods. Single-drop microextraction has been recognized as an efficient approach for the isolation and preconcentration of several analytes from a complex sample matrix. Thus, single-drop microextraction techniques are cost-effective and less harmful to the environment, subscribing to green analytical chemistry principles. Herein, an overview and the current advances in single-drop microextraction for the determination of antibiotics in environmental water are presented were included. In particular, two main approaches used to perform single-drop microextraction (direct immersion-single-drop microextraction and headspace-single-drop microextraction) are reviewed. Furthermore, the impressive analytical features and future perspectives of single-drop microextraction are discussed in this review.     

Metabolic Profiling and Quantitative Analysis of Cerebrospinal Fluid Using Gas Chromatography–Mass Spectrometry: Current Methods and Future Perspectives

Cerebrospinal fluid is a key biological fluid for the investigation of new potential biomarkers of central nervous system diseases. Gas chromatography coupled to mass-selective detectors can be used for this investigation at the stages of metabolic profiling and method development. Different sample preparation conditions, including extraction and derivatization, can be applied for the analysis of the most of low-molecular-weight compounds of the cerebrospinal fluid, including metabolites of tryptophan, arachidonic acid, glucose; amino, polyunsaturated fatty and other organic acids; neuroactive steroids; drugs; and toxic metabolites. The literature data analysis revealed the absence of fully validated methods for cerebrospinal fluid analysis, and it presents opportunities for scientists to develop and validate analytical protocols using modern sample preparation techniques, such as microextraction by packed sorbent, dispersive liquid–liquid microextraction, and other potentially applicable techniques.     

Applications of single-drop microextraction in analytical chemistry: A review

Single-drop microextraction (SDME) has been recognized as one of the simple miniaturized sample preparation tools for the isolation and preconcentration of several analytes from a complex sample matrix. In this review, we explored the applications of SDME coupled with various analytical techniques (spectroscopy, chromatography, and mass spectrometry) for the analysis of organic molecules, inorganic ions, and biomolecules from various sample matrices including food, environmental, clinical, pharmaceutical, and industrial samples. Also, it summarizes the use of nanoparticles in SDME combined with various analytical tools for the rapid analysis of several trace-level target analytes. An overview of ionic liquids, deep eutectic solvents, and SUPRAS, which improved the selectivity and sensitivity of various analytical techniques toward several analytes, as promising extracting solvent systems in SDME is also included. Finally, discussed the impressive analytical features and future perspectives of SDME in this review article.     

Analysis of odorous trichlorobromophenols in water by in-sample derivatization/solid-phase microextraction GC/MS

The simultaneous determination of several odorous trichlorobromophenols in water has been carried out by an in-sample derivatization headspace solid-phase microextraction method (HS-SPME).The analytical procedure involved their derivatization to methyl ethers with dimethyl sulfate/NaOH and further HS-SPME and gas chromatography-mass spectrometry (GC/MS) determination. Parameters affecting both the derivatization efficiency and headspace SPME procedures, such as the selection of the SPME fiber coating, derivatization–extraction time and temperature, were studied. The commercially available polydimethylsiloxane (PDMS) 100 μm and Carboxen-polydimethylsiloxane-divinylbenzene (CAR-PDMS-DVB) fibers appeared to be the most suitable for the simultaneous determination of these compounds. The precision of the HS-SPME/GC/MS method gave good relative standard deviations (RSDs) run-to-run between 9% and 19% for most of them, except for 2,5-diCl-6-Br-phenol, 2,6-diCl-3-Br-phenol and-2,3,6-triBr-phenol (22%, 25% and 23%, respectively). The method was linear over two orders of magnitude, and detection limits were compound dependent but ranged from 0.22 ng/l to 0.95 ng/l. The results obtained for water samples using the proposed SPME procedure were compared with those found with the EPA 625 method, and good agreement was achieved. Therefore, the in-sample derivatization HS-SPME/GC/MS procedure here proposed is a suitable method for the simultaneous determination of odorous trichlorobromophenols in water.     

Recent advances in the preparation and application of monolithic capillary columns in separation science

Novel column technologies involving various materials and efficient reactions have been investigated for the fabrication of monolithic capillary columns in the field of analytical chemistry. In addition to the development of these miniaturized systems, a variety of microscale separation applications have achieved noteworthy results, providing a stepping stone for new types of chromatographic columns with improved efficiency and selectivity. Three novel strategies for the preparation of capillary monoliths, including ionic liquid-based approaches, nanoparticle-based approaches and “click chemistry”, are highlighted in this review. Furthermore, we present the employment of state-of-the-art capillary monolithic stationary phases for enantioseparation, solid-phase microextraction, mixed-mode separation and immobilized enzyme reactors. The review concludes with recommendations for future studies and improvements in this field of research.     

固相微萃取-GC-MS法测定水中的三苯胂和二苯胂酸

建立了一种同时测定水中痕量三苯胂和二苯胂酸的方法,使用巯基乙酸甲酯作为二苯胂酸测定的衍生化试剂,固相微萃取耦合气相色谱-质谱法(选择离子监测)同时测定三苯胂和二苯胂酸。优化了萃取纤维丝、萃取时间、衍生化等操作条件。同时对混合物测定的回收率、相对标准偏差和最低检测限进行了研究。方法的回收率大于95%,最低检测质量浓度分别为0.0005和0.0003 mg/L,6次测定的相对标准偏差分别为5.3%、7.6%。     

Chemical reactions in liquid-phase microextraction

In recent years, liquid-phase microextraction (LPME), a microscale implementation of liquid-liquid extraction, has become a very popular sample pretreatment technique because it combines extraction and enrichment, and is inexpensive, easy to operate and nearly solvent-free. Especially so in hollow fiber-protected LPME, sample cleanup is also effected. Essentially, owing to its high sample-to-extracting solvent volume ratio, LPME can achieve high analyte enrichment. Since its advent, the technique has been widely used, and applied to environmental, pharmaceutical, biological and forensic analyses. This review focuses on developments relating to chemical reactions associated with LPME applications, in contrast to conventional, straightforward extractions in which analytes remain as they are during the extraction process. Chemical reactions brought about during LPME serve to promote the extractability of the analytes (thus expanding the scope of applicability of the technique), facilitate their (analyte) compatibility with the analytical system and/or improve detection sensitivity. The reactions that are usually enabled during LPME include ion-pair extraction (carrier-mediated membrane transport), complexation, chemical (pre-extraction, in situ, and post-extraction) derivatization, phase-transfer catalysis and other "special affinity" reactions. Strategies on chemical reactions in LPME are overviewed in this report.     

Use of green alternative solvents in dispersive liquid-liquid microextraction: A review

Dispersive liquid-liquid microextraction is one of the most widely used microextraction techniques currently in the analytical chemistry field, mainly due to its simplicity and rapidity. The operational mode of this approach has been constantly changing since its introduction, adapting to new trends and applications. Most of these changes are related to the nature of the solvent employed for the microextraction. From the classical halogenated solvents (e.g., chloroform or dichloromethane), different alternatives have been proposed in order to obtain safer and non-pollutants microextraction applications. In this sense, low-density solvents, such as alkanols, switchable hydrophobicity solvents, and ionic liquids were the first and most popular replacements for halogenated solvents, which provided similar or better results than these classical dispersive liquid-liquid microextraction solvents. However, despite the good performances obtained with low-density solvents and ionic liquids, researchers have continued investigating in order to obtain even greener solvents for dispersive liquid-liquid microextraction. For that reason, in this review, the evolution over the last five years of the three types of solvents already mentioned and two of the most promising solvent alternatives (i.e., deep eutectic solvents and supramolecular solvents), have been studied in detail with the purpose of discussing which one provides the greenest alternative.     

Electrochemical Detection for Capillary Electrophoresis Microchips: A Review

Electrochemistry detection offers considerable promise for capillary‐electrophoresis (CE) microchips, with features that include remarkable sensitivity, portability, independence of optical path length or sample turbidity, low cost and power requirements, and high compatibility with modern micromachining technologies. This article highlights key strategies in controlled‐potential electrochemical detectors for CE microchip systems, along with recent advances and directions. Subjects covered include the design of the electrochemical detection system, its requirements and operational principles, common electrode materials, isolation from the separation voltage, derivatization reactions, typical applications, and future prospects. It is expected that electrochemical detection will become a powerful tool for CE microchip systems and will lead to the creation of truly portable (and possibly disposable) devices.     

Derivatization in mass spectrometry --7. On-line derivatisation/degradation

The review describes on-line derivatization/degradation methods employed in mass spectrometry to solve some structural and analytical problems. Advantages and applications of various positions of reaction systems connected mainly to a mass spectrometer or a gas chromatograph/mass spectrometer are considered. Among these are reaction systems connected directly to the mass spectrometer (reaction mass spectrometry, pyrolysis-mass spectrometry or direct pyrolysis-mass spectrometry); flash-heaters as reactors in gas chromatography/mass spectrometry (GC/MS); in-line chemical reactors located before the chromatographic column [pre-column derivatization/degradation with the use of catalytic reactions, pyrolysis (pyrolysis-GC/MS), degradation in elemental analyzers-isotope ratio mass pectrometry (EA-IRMS)]; on-column derivatization and deuteration; reactor located between the chromatographic column and a mass spectrometer [post-column catalytic derivatization, gas chromatograph-combustion-isotope ratio mass spectrometer (GC-c-IRMS)]. Post-column derivatization in high performance liquid chromatography/mass spectro-metry is briefly mentioned. Application of such on-line methodology to structure elucidation of low molecular mass compounds and polymers, to the determination of isotope ratios of the most common elements, to the investigation of catalytic reactions is discussed..     

Combination of ultrasound‐assisted ethyl chloroformate derivatization and switchable solvent liquid‐phase microextraction for the sensitive determination of l‐methionine in human plasma by GC–MS

A green and fast analytical method for the determination of l ‐methionine in human plasma is presented in this study. Preconcentration of the analyte was carried out by switchable solvent liquid phase microextraction after ethyl chloroformate derivatization reaction. Instrumental detection of the analyte was performed by means of gas chromatography–mass spectrometry. N,N‐Dimethyl benzylamine was used in the synthesis of switchable solvent. Protonated N,N‐dimethyl benzylamine volume, volume/concentration of sodium hydroxide, and vortex period were meticulously fixed to their optimum values. Besides, ethyl chloroformate, pyridine, and ethanol volumes were optimized in order to get high derivatization yield. After the optimization studies, limit of detection and quantitation values were attained as 3.30 and 11.0 ng/g, respectively, by the developed switchable solvent liquid phase microextraction gas chromatography–mass spectrometry method that corresponding to 76.7‐folds enhancement in detection power of the gas chromatography–mass spectrometry system. Applicability and accuracy of the switchable solvent liquid phase microextraction–gas chromatography–mass spectrometry method were also checked by spiking experiments. Percent recovery results were ranged from 97.8 to 100.5% showing that human plasma samples could be analyzed for its l ‐methionine level by the proposed method.     

Selenium analysis in water samples by dispersive liquid-liquid microextraction based on piazselenol formation and GC–ECD

The application of the recently introduced dispersive liquid–liquid microextraction (DLLME) for the separation and determination of an inorganic selenite [Se(IV)] derivative by means of a gas chromatography–electron-capture detection system has been studied. The selenium derivative was extracted with the DLLME technique using a mixture of ethanol (disperser solvent) and chlorobenzene (extraction solvent). The influences of the various analytical parameters on the derivatization reaction and microextraction procedure have been evaluated and optimized. Under the optimum conditions, an enrichment factor of 122 was obtained for only 5.00 mL of the water sample. The calibration graph was linear in the range of 0.015–10 μg L^?1 with a detection limit of 0.005 μg L^?1. The relative standard deviation for ten replicate measurements of 2 μg L^?1 of selenium was 4.1%. The method was applied to the determination of selenium in environmental surface water samples with satisfactory recovery.     

Analysis of volatile aldehyde biomarkers in human blood by derivatization and dispersive liquid–liquid microextraction based on solidification of floating organic droplet method by high performance liquid chromatography

A new dispersive liquid–liquid microextraction based on solidification of floating organic droplet method (DLLME-SFO) was developed for the determination of volatile aldehyde biomarkers (hexanal and heptanal) in human blood samples. In the derivatization and extraction procedure, 2,4-dinitrophenylhydrazine (DNPH) as derivatization reagent and formic acid as catalyzer were injected into the sample solution for derivatization with aldehydes, then the formed hydrazones was rapidly extracted by dispersive liquid–liquid microextraction with 1-dodecanol as extraction solvent. After centrifugation, the floated droplet was solidified in an ice bath and was easily removed for analysis. The effects of various experimental parameters on derivatization and extraction conditions were studied, such as the kind and volume of extraction solvent and dispersive solvent, the amount of derivatization reagent, derivatization temperature and time, extraction time and salt effect. The limit of detections (LODs) for hexanal and heptanal were 7.90 and 2.34 nmol L⁻¹, respectively. Good reproducibility and recovery of the method were also obtained. The proposed method is an alternative approach to the quantification of volatile aldehyde biomarkers in complex biological samples, being more rapid and simpler and providing higher sensitivity compared with the traditional dispersive liquid–liquid microextraction (DLLME) methods.