N-去甲万古霉素的亲和吸附

通过交联聚丙烯酸甲酯与乙醇胺反应,形成聚(N-羟乙基丙烯酰胺)树脂,在酸催化作用下与环氧氯丙烷反应,形成含有α-羟基氯乙基的树脂.含α-羟基氯乙基的树脂与D-丙氨酸、L-丙氨酸或甘氨酸反应,分别得到含有这3种氨基酸的吸附剂.这3种吸附剂吸附N-去甲万古霉素的结果表明,含D-丙氨酸的吸附剂的吸附量最大,含甘氨酸的吸附剂的吸附量次之,而含L-丙氨酸的吸附剂不吸附N-去万古霉素.说明前两种吸附剂对N-去甲万古霉素存在亲和吸附作用.含D-丙氨酸吸附剂的最佳吸附pH值为5.8,当吸附液中的盐(NaCl)浓度增加时,吸附量降低.用0.4mol/LNa₂CO₃/CH₃CN(摩尔比7∶3,pH=9.5)作为洗脱剂可完全脱附被吸附的N-去甲万古霉素.     

表面等离子体子共振传感器用于研究不同材质包裹的磁性纳米粒子性质

利用自行设计组装的以白色发光二极管为光源的表面等离子体子共振传感器实验装置, 检测了不同材质包裹的磁性纳米粒子连接靶向DNA与生物素化DNA探针的结合程度. 结果表明, 与聚苯乙烯磁性微球连接的靶向DNA相比, Fe3O4@SiO2核壳式纳米微球连接的靶向DNA与生物素化的DNA探针结合速率较快, 且其相对标准偏差较小.     

乳腺癌术前灰阶超声与彩色多普勒超声联合应用对预后的预测价值

目的探究乳腺癌术前灰阶超声与彩色多普勒超声联合应用对预后的预测价值。方法选取温州医科大学附属第一医院2013年5月—2015年5月期间收治的乳腺癌患者83例,治疗前均行灰阶超声与彩色多普勒超声检查,分析患者超声检查结果、临床征象与术后随访2年期间患者预后的关系,从而分析术前灰阶超声与彩色多普勒超声联合应用对乳腺癌患者预后的预测价值。结果乳腺癌肿块边界清晰、边界不清晰、边界恶性晕的患者2年无瘤生存率依次降低,边界恶性晕与边界不清晰患者死亡率均显著高于边界清晰患者(P0.05);肿瘤≥2 cm患者2年无瘤生存率显著低于2 cm患者;淋巴结转移患者2年无瘤生存率显著低于无转移患者(P0.05);血流分级Ⅱ级患者2年无瘤生存率明显低于0级(P0.05),Ⅲ级患者2年无瘤生存率显著低于0级和Ⅰ级(P0.05)。结论乳腺癌患者术前联合应用灰阶超声与彩色多普勒超声检查可确定肿瘤边界、大小及淋巴转移等征象,其与患者无瘤生存率、死亡率等预后指标密切相关,可作为预测乳腺癌患者预后的重要方法。     

金蒲抑瘤片在鼻咽癌的临床应用研究

为探讨鼻咽癌患者放疗期间合并应用金蒲抑瘤片治疗对细胞免疫功能及血中微量元素硒、锌、铜的影响，经病理证实鼻咽癌患者58例，随机分为放疗服药组30例和单纯放疗组28例。两组放疗前后抽静脉血测定T细胞亚群（CD3＋，CD4＋，CD8＋，CD4＋／CD8＋），血中微量元素硒，锌，铜并与30例健康者（正常对照组）进行比较。结果表明，鼻咽癌患者血中微量元素硒，锌，铜及CD3＋，CD4＋，CD4＋／CD8＋显著低于健康人，放疗期间合并应用金蒲抑瘤片治疗后血中微量元素硒，锌，铜及CD3＋，CD4＋，CD4＋／CD8＋较服药前显著升高。提示鼻咽癌患者细胞免疫功能低下，血中微量元素硒，锌，铜显著低于健康人。金蒲抑瘤片能提高鼻咽癌患者因中微量元素硒，锌，铜含量，使低下的细胞免疫功能迅速恢复。     

合成聚芳酯树状分子的新方法

以３，５－二羟基 苯甲酸为起始原料，经甲醇酯化保护羧基，与苯甲酰氯反应，得到３，５－二苯甲酰氧基苯甲酸甲酯用ＡｌＣｌ３．ＮａＩ去掉保护基甲基，以高收率得到３，５－二苯甲酰氧基苯甲酸。其结构均是由ＩＲ，＾１ＨＮＭＲ，ＥＡ等方法证实。     

Synthesis and copolymerization of new phosphorus‐containing acrylates

Two phosphorus‐containing acrylate monomers were synthesized from the reaction of ethyl α‐chloromethyl acrylate and t‐butyl α‐bromomethyl acrylate with triethyl phosphite. The selective hydrolysis of the ethyl ester monomer with trimethylsilyl bromide (TMSBr) gave a phosphonic acid monomer. The attempted bulk polymerizations of the monomers at 57–60 °C with 2,2′‐azobisisobutyronitrile (AIBN) were unsuccessful; however, the monomers were copolymerized with methyl methacrylate (MMA) in bulk at 60 °C with AIBN. The resulting copolymers produced chars on burning, showing potential as flame‐retardant materials. Additionally, α‐(chloromethyl)acryloyl chloride (CMAC) was reacted with diethyl (hydroxymethyl)phosphonate to obtain a new monomer with identical ester and ether moieties. This monomer was hydrolyzed with TMSBr, homopolymerized, and copolymerized with MMA. The thermal stabilities of the copolymers increased with increasing amounts of the phosphonate monomer in the copolymers. A new route to highly reactive phosphorus‐containing acrylate monomers was developed. A new derivative of CMAC with mixed ester and ether groups was synthesized by substitution, first with diethyl (hydroxymethyl)phosphonate and then with sodium acetate. This monomer showed the highest reactivity and gave a crosslinked polymer. The incorporation of an ester group increased the rate of polymerization. The relative reactivities of the synthesized monomers in photopolymerizations were determined and compared with those of the other phosphorous‐containing acrylate monomers. Changing the monomer structure allowed control of the polymerization reactivity so that new phosphorus‐containing polymers with desirable properties could be obtained. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2207–2217, 2003     

Comparison of electrothermal atomization diode laser Zeeman- and wavelength-modulated atomic absorption and coherent forward scattering spectrometry

Atomic absorption and coherent forward scattering spectrometry by using a near-infrared diode laser with and without Zeeman and wavelength modulation were carried out with graphite furnace electrothermal atomization. Analytical curves and limits of detection were compared. The magnetic field was modulated with 50 Hz, and the wavelength of the diode laser with 10 kHz. Coherent forward scattering was measured with crossed and slightly uncrossed polarizers. The results show that the detection limits of atomic absorption spectrometry are roughly the same as those of coherent forward scattering spectrometry with crossed polarizers. According to the theory with bright flicker noise limited laser sources the detection limits and linear ranges obtained with coherent forward scattering spectrometry with slightly uncrossed polarizers are significantly better than those obtained with crossed polarizers and with atomic absorption spectrometry. This is due to the fact that employing approaches of polarization spectroscopy reduce laser intensity fluctuations to their signal carried fractions.     

Evidences of macromolecular chains confinement of ethylene–propylene copolymer in organophilic montmorillonite nanocomposites

A random ethylene–propylene copolymer (EPM) functionalized with grafted diethylsuccinate groups was melt blended with increasing amount (to 20 wt%) of organophilic montmorillonite (OMMT) to prepare nanocomposites with different morphologies as evidenced by XRD and TEM analysis. All the nanocomposites were treated with boiling toluene that did not extract a significant amount of EPM. The increase of not-extracted EPM with the increasing quantity of OMMT suggested strong interactions of the polymer chains with the inorganic substrate. The DSC measurements of nanocomposites and the corresponding insoluble residues revealed a higher T_g values with larger amount of inorganic particles. The dielectric relaxation analysis confirmed the evidence of strong interactions among montmorillonite and the polar diethylsuccinate groups for the macromolecules trapped due to the presence of the inorganic layers. The results were discussed with reference to their relevance as an evidence of nanoconfinement at polymer clay interface and correlated with the clay basal distance variation due to the intercalation process.     

Synthesis of branched copolysilanes from trichlorosilanes

Soluble polymers and copolymers have been prepared from monosubstituted trichlorosilanes via thermal reductive coupling with sodium in toluene. Phenyltrichlorosilane has been copolymerized with methylphenyl dichlorosilane, with n-hexyltrichlorosilane, with tetrachlorosilane and with tetrakis(chlorodimethylsilyl)silane. n-Hexyltrichlorosilane has been copolymerized with methylphenyldichlorosilane, with phenyltrichlorosilane and with silicon tetrachloride. Soluble polymers and copolymers with molecular weight in the range ≈ 2,000 to ≈ 10⁶ have been obtained. The absorption and emission spectra of the resulting polymers are strongly affected by the presence of trisilyl- and tetrasilylsubstituted silicon atoms. © 1995 John Wiley & Sons, Inc.     

CRYSTALLIZATION OF BLENDS OF AN ASYMMETRIC POLY（OXYETHYLENE）-b-POLY（OXYBUTYLENE） BLOCK COPOLYMER WITH POLY（OXYBUTYLENE）

An oxyethylene/oxybutylene block copolymer with asymmetric volume fraction (E115B103) was blended with oxybutylene homopolymer (Bh) at different volume fractions of the block (φE). Crystallization behavior of the blends was studied and was compared with that of the blends from a symmetric block copolymer (E114B56). It was found that the crystallization temperature of E115B103/B28 blend is lower than that of the blends from symmetric block copolymer. For the blend with φE= 0.30 breakout crystallization with an Avrami exponent n ≈ 3.0 is observed. At φE = 0.22 the blend exhibits a variable crystallization behavior: confined crystallization with n ≈ 1.0 at lower crystallization temperatures but breakout crystallization at high crystallization temperatures. For the blend with φE = 0.14 and sphere morphology confined crystallization occurs at all crystallization temperatures studied. When compared with the blends from symmetric block copolymer, confined crystallization occurs more easily in the E115B103/B28 blends. The SAXS results agree with the isothermal crystallization kinetics. Deformation of the confined crystalline block is observed in the blend with φE = 0.14 and mixed lamellar and cylinder morphologies in the blend with φE = 0.22.     

Partitioning and adsorption in gas-liquid-solid chromatography: Models of temporal moments for retention and variance

Summary The resolution of gaseous chemical species in gasliquid-solid chromatography is influenced by absorption (partitioning) in the liquid and adsorption at the liquid-solid interface. We consider fundamental mass transfer models with adsorption and partitioning effects for solid chromatographic supports covered with thin films of stationary liquid. The dynamic models, based on mass-balance partial-differential equations, include the significant phenomena: convection, axial dispersion, gas-liquid mass transfer, intraparticle diffusion, and liquid-solid adsorption. Expressions for retention time and band variance (first and second temporal moments) are presented and evaluated for four distinct models: (1) capillary tube with inner surface covered with a uniform-thickness liquid film, (2) column of nonporous spheres covered with a uniform-thickness liquid film, (3) porous spherical particles with intraparticle pores covered with a uniform-thickness liquid film, (4) porous spherical particles with intraparticle pores completely filled with liquid.     

Analytical temperature rising elution fractionation of different polyethylene types using a column filled with carbon nanotubes

A high temperature gel permeation chromatograph (GPC) was coupled with a gas chromatograph (GC) oven to obtain an analytical temperature rising elution fractionation (TREF) system with evaporative light scattering detection. On this instrument, a new column partially filled with pristine carbon nanotubes (CNT) was tested by evaluating the elution profiles in function of temperature (thermograms) of different polyethylene (PE) types. By comparing these thermograms with those obtained with a traditional TREF column filled with metallic wires, the adsorption of polymer chains on the pristine CNT was clearly evidenced. The thermograms given by the column filled with CNT are similar with those provided by literature when chromatographic columns filled with porous graphitic carbon are used for this application, usually described as high temperature thermal gradient interaction chromatography (HT-TGIC).     

Synthesis of Some Novel 2‐Anilinothiophene, 2,3′‐Bithienyl and Thienylthiopyridine Derivatives Resistance to Penicillium Digitatum Effect the Fruit

Reaction of benzotriazol‐1‐yl acetone 1 with phenyl isothiocyanate followed with α‐chloroacetone or ethyl‐α‐chloroacetate afforded 2‐anilinothiophenes 3 or 4 , respectively. Treatment of 3 with malononitrile at different reaction conditions afforded 6 or 7 . Reaction of 1 with CS₂ in DMF and phenacylbromide afforded S‐alkylated thiophene 10 . Reactions of the latter compound with different active methylene nitriles afforded thienylthiopyridine derivatives 14 and 15 . Condensation of 10 with hydrazine hydrate afforded hydrazon derivative 16 . Reaction of thiophene 17 with formamide in DMF afforded 19 which converted to N‐thienylpyrimidine 20 when treated with malononitrile. The structure of the newly synthesized compounds has been established on the basis of their analytical and spectral data. The compounds were also investigated for antibacterial and antifungal activities.     

Growth of Au@Ag Core–Shell Pentatwinned Nanorods: Tuning the End Facets

Au@Ag core–shell nanorods with tunable end facets are obtained by coating Au bipyramids (BPs) with Ag. The resultant nanorods exhibit a pentatwinned crystal structure with tips terminated with either {110} or {111} facets. The control over the end facets is achieved by varying the capping agents and tuning the reduction rate of Ag. Specifically, when Ag is reduced slowly, Au@Ag nanorods with flat {110} end facets are formed with cetyltrimethylammonium bromide (CTAB) as the capping agent. If CTAB is replaced with cetyltrimethylammonium chloride (CTAC), Au@Ag nanorods with tips terminated with {111} facets are obtained. However, at a high Ag reduction rate, dumbbell‐shaped Au@Ag nanorods are formed, with either CTAB or CTAC as the capping agent. The morphological evolution of the nanorods in each case is closely followed and a growth mechanism is proposed.     

微量元素变化对反复呼吸道感染的影响

检测了240例反复呼吸道感染患儿血微量元素含量。结果表明,反复呼吸道感染患儿血锌、铁、钙低于正常对照组(P<0.01);血铅高于正常对照组(P<0.01);血铜、镁两组相当,差异不显著(P<0.05)。提示反复呼吸道感染患儿体内存在锌、铁、钙元素缺乏及铅含量升高。     

Thin-layer chromatographic and high-performance thin-layer chromatographic ready-for-use layers with lipophilic modifications

Stable silica gel sorbents with aliphatic or aromatic groups are formed by chemical modifications of the silanol groups with special reactive silanes. Various lipophilic surface modifications on silica gels with varying pore structures are tested with regard to their chemical and physico-chemical characteristics, their wettability and their chromatographic retention data. The main problem in TLC is the preparation of abrasion-resistant layers on glass or on foils which meet the usual high standard of quality and are also suited for quantitative determinations. Thin-layer chromatography on reversed-phase layers can only be performed if the complete wettability of the lipophilic stationary phase in dry form is guaranteed by the mobile phase. Adsorption-chromatographic separations with lipophilic eluents and reversed-phase partition-chromatographic separations with hydrophilic eluents are performed, for example, with dyes, with polycyclic aromatic hydrocarbons and with lipids. The great differences in selectivity caused by the various modifications of the sorbent and the varying eluent composition are remarkable. Ready-for-use layers with lipophilic surface modifications complement the existing range of pre-coated layers and thus widen the application of TLC and HPTLC considerably.     

卤代苯与水分子间作用的从头算

污染是科学家关注的热点问题,化学污染物是造成水污染的重要因素［１］．在水环境中,卤代苯是一类优先污染物（ｐｒｉｏｒｉｔｙｐｏｌｕｔａｎｔｓ）［２］．这类污染物毒性大,在环境中的半衰期长,美国环保局（ＥＰＡ）已经把它们列入优先污染物之列．Ｖｅｒｓｃｈｎ...     

Diversity oriented synthesis of conjugate dienes and alkenylcyclopropanes utilizing silyl group-substituted titanium carbene complexes as bimetallic synthetic reagents

Diversity oriented synthesis of conjugate dienes and alkenylcyclopropanes by the sequential reactions using silyl group-substituted titanium carbene complexes was studied. Dienylsilanes were obtained by the olefination of carbonyl compounds with γ-silylvinylcarbene complexes. Cyclopropanation of 1-alkenes with the vinylcarbene complexes produced (E)-(β-silylvinyl)cyclopropanes with high stereoselectivity. The reaction of β-(trialkylsilyl)carbene complexes with zinc alkoxides of homopropargyl alcohols produced 6-silyl-3,5-hexadien-1-ols with high regio- and stereoselectivity. The (E)-alkenylsilanes thus obtained were transformed into a range of unsaturated compounds by the palladium-catalyzed or copper(I)-promoted cross-coupling with organic halides with retention of configuration.     

Coaxially bifocal liquid crystal lens with switchable optical aperture

An electrically tunable liquid crystal (LC) lens with dual hole-patterned electrodes is demonstrated. When the LC lens is operated at low voltages, the dual hole-patterned electrodes with different diameters impart the lens with a coaxial bifocal characteristic. At high voltages, the proposed LC lens functions as a conventional lens with a single focal length but with a switchable optical aperture. The demonstrated LC lens is free of disclination lines because of the presence of voltage-assisted high pretilt angles created from the upmost hole-patterned electrode with small diameter.     

稀土奥贝蠕铁制取工艺及其性能的研究

稀土奥贝蠕铁可用含稀土的蠕化剂及等温淬火工艺稳定地制取,藉助高温扫描电子显微镜,观察并研究了稀土蠕铁奥氏体化过程及稀土奥贝蠕铁随温度升高时组织的变化。用带有加热装置的万能材料试验等土奥贝蠕铁的各种性能进行了系统测定了如抗拉强度、延伸率、冲吉韧性、热膨胀系数及伸长百分率,结果表明,稀土奥贝蠕铁在室温和高温下均有良好的性能。