Electro-oxidation of ethanol using PtRuBi/C electrocatalyst prepared by borohydride reduction

Pt/C, PtRu/C, PtBi/C, and PtRuBi/C electrocatalysts (20 wt.% metal loading) were prepared by borohydride reduction using H₂PtCl₆·6H₂O, RuCl₃·xH₂O, and Bi(NO₃)₃·5H₂O as metal sources and Vulcan XC 72 as support. The electrocatalysts were characterized by energy-dispersive X-ray analysis, X-ray diffraction, and thermogravimetric analysis. The electro-oxidation of ethanol was studied in sulfuric acid solution by cyclic voltammetry and chronoamperometry. The electrochemical studies showed that PtRuBi/C (50:40:10) electrocatalyst has superior performance for ethanol electro-oxidation at room temperature compared to the other electrocatalysts. Preliminary tests at 100 °C on a single direct ethanol fuel cell also confirm the results obtained by electrochemical techniques.     

Preparation of PtSnRh/C-Sb2O5·SnO2 electrocatalysts by an alcohol reduction process for direct ethanol fuel cell

PtSnRh/C-Sb₂O₅·SnO₂ electrocatalysts with different Pt/Sn/Rh atomic ratios (90:05:05, 70:25:05, and 50:45:05) were prepared by an alcohol reduction process using H₂PtCl₆·6H₂O, SnCl₂·2H₂O, RhCl₃·xH₂O as metal sources, ethylene glycol as solvent and reducing agent, and a physical mixture of Vulcan XC72 (85?wt%) and Sb₂O₅·SnO₂ (15?wt%) as support. The electrocatalysts were characterized by X-ray diffraction and transmission electron microscopy. The electro-oxidation of ethanol was studied by cyclic voltammetry and chronoamperometry at 25 and 50?°C and in single direct ethanol fuel cell (DEFC) at 100?°C. The diffractograms of PtSnRh/C-Sb₂O₅·SnO₂ electrocatalysts showed the peaks characteristic of Pt face-centered cubic structure and several others peaks associated with ·SnO₂ and Sb₂O₅·SnO₂. Transmission electron micrographs of PtSnRh/C-Sb₂O₅·SnO₂ electrocatalysts showed the metal nanoparticles distributed on the supports with particle sizes of about 2?C3?nm. The electrochemical measurements and the experiments in a single DEFC showed that PtSnRh/C-Sb₂O₅·SnO₂ (90:05:05) and PtSnRh/C-Sb₂O₅·SnO₂ (70:25:05) electrocatalysts exhibited higher performance for ethanol oxidation in comparison with PtSnRh/C electrocatalyst.     

Preparation and characterization of PtRu/C-rare earth using an alcohol-reduction process for ethanol electro-oxidation

PtRu/C (100% C) and PtRu/C-CeO₂, PtRu/C-La₂O₃, PtRu/C-Nd₂O₃, and PtRu/C-Er₂O₃ (85% C and 15% rare earth) electrocatalysts were prepared in a single step by an alcohol-reduction process using H₂PtCl₆ 6H₂O and RuCl₃ xH₂O as metal sources, ethylene glycol as solvent and reducing agent, Vulcan XC72 and rare earth (RE) as support. The electrocatalysts were characterized by energy dispersive X-ray, X-ray diffraction, and transmission electron microscopy. The performance for ethanol oxidation was investigated by cyclic voltammetry and chronoamperommetry at room temperature, and studies on the direct ethanol fuel cell were carried at 100 °C. The Pt:Ru atomic ratios were similar to the nominal used in preparation, and the average particle sizes were in the range of 2.0–3.0 nm. All PtRu/C-RE electrocatalysts showed an increase of performance for ethanol oxidation at room temperature and also on a single direct ethanol fuel cell tests in relation to PtRu/C electrocatalyst at 100 °C.     

Preparation of PtSn/C electrocatalysts using citric acid as reducing agent for direct ethanol fuel cell (DEFC)

PtSn/C electrocatalysts (Pt:Sn atomic ratios of 50:50 and 60:40) were prepared using citric acid as reducing agent, and the pH of the reaction medium was varied by the addition of OH⁻ ions. The obtained electrocatalysts were characterized by energy dispersive X-ray analysis, X-ray diffraction, and transmission electron microscopy. The electrocatalysts were tested on the direct ethanol fuel cell (DEFC) at 90 °C. The obtained PtSn/C electrocatalysts showed the presence of a face-centered cubic, Pt, and SnO₂ phases. In DEFC studies, the PtSn/C electrocatalysts showed a superior performance compared to a commercial PtSn/C and Pt/C electrocatalysts from E-TEK.     

Electro-oxidation of ethylene glycol on PtSn/C and PtSnNi/C electrocatalysts

A PtSn/C electrocatalyst with a Pt–Sn molar ratio of 50:50 and A PtSnNi/C electrocatalyst with a Pt–Sn–Ni molar ratio of 50:40:10 were prepared by alcohol-reduction process using ethylene glycol as solvent and reducing agent. The electrocatalysts were characterized by energy dispersive X-ray, X-ray diffraction, and cyclic voltammetry. The electro-oxidation of ethylene glycol was studied by cyclic voltammetry and chronoamperometry using the thin porous coating technique. PtSnNi/C electrocatalyst showed a superior performance compared to PtSn/C electrocatalysts in the potential range of interest for a direct ethylene glycol fuel cell.     

Electro-oxidation of ethanol using PtSnRh/C electrocatalysts prepared by an alcohol-reduction process

PtRh/C (90:10), PtRh/C (50:50), PtSn/C (50:50), and PtSnRh/C (50:40:10) electrocatalysts were prepared by an alcohol-reduction process using ethylene glycol as solvent and reduction agent and Vulcan Carbon XC72 as supports. The electrocatalysts were characterized by energy-dispersive X-ray analysis, X-ray diffraction, and transmission electron microscopy. The electro-oxidation of ethanol was studied by cyclic voltammetry chronoamperometry at room temperature and on a single cell of a direct ethanol fuel cell at 100 °C. Cyclic voltammetry and chronoamperometry experiments showed that PtSnRh/C and PtSn/C electrocatalysts have similar performance for ethanol oxidation at room temperature, while the activity of PtRh/C electrocatalysts was very low. At 100 °C on a single cell, PtSnRh/C showed superior performance compared to PtSn/C and PtRh/C electrocatalysts.     

Effect of Ni proportion on the performance of proton exchange membrane fuel cells using PtNi/C electrocatalysts

PtNi/C electrocatalysts were synthesised by borohydride method on functionalised carbon support. Energy-dispersive X-ray spectroscopy, X-ray diffraction, transmission electron microscopy and both cyclic and linear voltammetry were employed to characterise the composition, crystalline structure, morphology and catalytic properties of the PtNi/C electrocatalysts. Different Ni proportions in the PtNi/C electrocatalysts were evaluated in the cathode or anode in a H₂/air proton exchange membrane fuel cells (PEMFC) by polarisation curves. PtNi particles uniformly dispersed with different proportions of metals obtained. The increase of Ni proportion in the electrocatalyst led to materials with higher mass activity values toward the oxygen reduction reaction and a greater electrochemical-active surface area. PtNi/C electrocatalysts in the cathode presented higher mass activity values at high potential in the PEMFC. The best PEMFC performance was obtained with PtNi 13 at.% Ni (cathode) and Pt/C (anode) relative to the Pt/C (cathode and anode) with identical Pt loadings. PtNi/C electrocatalysts in PEMFC may be used as an alternative to Pt/C electrocatalyst.     

Conducting antimony-doped tin oxide films derived from stannous oxalate by aqueous sol-gel method

Nanocrystalline SnO₂:Sb films were prepared by a sol-gel route using C₆H₈O₇-triethanolamine (TEA) mixing aqueous solution with pH 6.5-7.0. Stannous oxalate and antimony trichloride were used as tin and antimony sources. IR, XRD FESEM, FETEM, UV-vis and four-point probe measurement were used to characterize sol-gel chemistry, structure, morphologies, optical and electrical properties. Mechanism of sol-gel reaction illuminated that existence of TEA supplied large numbers of active tin hydrate and ionized state carboxyl groups for tin and antimony chelation through the amido association with the ionized H⁺ on -COOH of H₃L and H₂C₂O₄. The 6 at.% Sb-doped films with film thickness of 600 nm had sheet resistance as low as 42.85 Ω/ when annealed at 450 °C for 10 min. Annealing temperature intensively altered sheet resistance and optimum was in the range of 450-500 °C. The longer annealing time caused Sb volatilization which led to the optimum doping level shifted from 6 to 12 at.%.     

Electrochemical characterization of platinum-based anode catalysts for membraneless fuel cells

In the present work, carbon-supported Pt–Sn, Pt–Ru, and Pt–Sn–Ru electrocatalysts with different atomic ratios were prepared by alcohol-reduction method to study the electro-oxidation of ethanol in membraneless fuel cells. The synthesized electrocatalysts were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDX), and X-ray diffraction (XRD) analyses. The prepared catalysts had similar particle morphology, and their particle sizes were 2–5 nm. The electrocatalytic activities were characterized by cyclic voltammetry (CV) and chronoamperometry (CA). The electrochemical results obtained at room temperature showed that the addition of Sn and Ru to the pure Pt electrocatalyst significantly improved its performance in ethanol electro-oxidation. The onset potential for ethanol electro-oxidation was 0.2 V vs. Ag/AgCl, in the case of the ternary Pt–Sn–Ru/C catalysts, which was lower than that obtained for the pure Pt catalyst (0.4 V vs. Ag/AgCl). During the experiments performed on single membraneless fuel cells, Pt ? Sn ? Ru/C (70:10:20) performed better among all the catalysts prepared with power density of 36 mW/cm². The better performance of ternary Pt–Sn–Ru/C catalysts may be due to the formation of a ternary alloy and the smaller particle size.     

Exploration of bimetallic Pt-Pd/C nanoparticles as an electrocatalyst for oxygen reduction reaction

In this study, carbon supported Pt and Pt-Pd were synthesized as oxygen reduction reaction electrocatalysts for polymer electrolyte membrane fuel cells (PEMFCs). Pt and Pt-Pd nanoparticles have been synthesized by reduction of metal precursors in presence of NaBH₄. Various techniques such as X-ray diffraction (XRD), energy dispersive X-ray analysis (EDX) and scanning electron microscopy (SEM) were utilized to study the prepared samples. Furthermore, electrochemical properties of the prepared samples were evaluated from cyclic voltammetry (CV), linear sweep voltammetry (LSV), chronoamperometry and electrochemical impedance spectroscopy (EIS). The results showed, the crystallite size of electrocatalysts (Pt and Pt-Pd) is below 10 nm. The higher catalytic activity was detected for Pt-Pd/C electrocatalyst for oxygen reduction reaction (ORR). In addition, it is believed that the better performance of electrocatalyst is related to the synergic effect between Pt and Pd nanoparticles, weakening of the OO bond on Pd-modified Pt nanoparticles in ORR, uniform dispersion of Pd and Pt on the carbon support and higher electrochemical active surface area (EAS) of Pt-Pd/C electrocatalyst.     

Highly thermal stable transparent conducting SnO2:Sb epitaxial films prepared on α-Al2O3 (0 0 0 1) by MOCVD

Antimony-doped tin oxide (SnO₂:Sb) single crystalline films have been prepared on α-Al₂O₃ (0 0 0 1) substrates by metal organic chemical vapor deposition (MOCVD). The antimony doping was varied from 2% to 7% (atomic ratio). Post-deposition annealing of the SnO₂:Sb films was carried out at 700-1100 °C for 30 min in atmosphere ambient. The effect of annealing on the structural, electrical and optical properties of the films was investigated in detail. All the SnO₂:Sb films had good thermal stability under 900 °C, and the 5% Sb-doped SnO₂ film exhibited the best opto-electrical properties. Annealed above 900 °C, the 7% Sb-doped SnO₂ film still kept high thermal stability and showed good electrical and optical properties even at 1100 °C.     

Novel synthesis and characterization of nanocomposite Pt-WO3-TiO2/C electrocatalyst for PEMFC

In this study, an effective preparation of Pt-WO₃-TiO₂/C electrocatalysts has been developed for polymer electrolyte membrane fuel cell (PEMFC) application. The single cell performance of Vulcan XC-72R carbon-supported Pt-WO₃-TiO₂ electrocatalysts with various compositions (as weight percentage Pt-W-Ti 0:5:5, 2:4:4, 4:3:3, 6:2:2, and 8:1:1) as anode materials are investigated in PEMFC. These catalysts are compared with 10 % Pt/C on the same Vulcan XC-72R carbon support and 10 % Pt/C (commercial) electrocatalyst. The physical and morphological characterization of the optimized Pt-WO₃-TiO₂/C, 10 % Pt/C, and 10 % Pt/C (commercial) electrocatalysts are further investigated by X-ray diffraction (XRD), cyclic voltammetry, scanning electron microscopy with energy-dispersive X-ray analysis, and transmission electron microscopy (TEM) techniques. Among all the molar ratio of the catalysts, the Pt-W-Ti (4:3:3) molar ratio catalyst exhibited the larger electrochemical active surface area. The electrochemical performance of Pt-WO₃-TiO₂/C (with a weight percentage of Pt-W-Ti 4:3:3) as anode material is better than those of other compositions of Pt-WO₃-TiO₂/C catalysts. The amount of platinum was also reduced from 1.76 to 0.704 mg cm^?2 which exhibited higher performance in single cell tests. Platinum shows a smaller-sized crystalline structure in XRD and TEM analysis. High performance indicates that enhanced proton transport occurs through the use of this catalyst.     

碳载PtSn催化剂上乙醇电氧化的原位时间分辨红外光谱研究

采用调变的多元醇法制备了高分散碳载PtSn催化剂(PtSn/C),XRD测试结果表明金属粒子的平均粒径为2.2 nm,略小于Pt/C催化剂,而晶格参数相对增大。通过电化学原位时间分辨红外光谱研究了乙醇在PtSn/C催化剂上的吸附和氧化过程,表明线性吸附态CO(CO_L)是主要的乙醇解离吸附物种,导致催化剂中毒,阻止反应继续进行;当电位增大到0.3 V时,出现了乙醛和乙酸的红外吸收峰,作为乙醇解离吸附的竞争反应,乙醛和乙酸的生成有效抑制了催化剂中毒,随着电位的增大和时间的延长,生成乙酸的选择性增大;电位进一步增大至0.4 V时有微弱CO₂吸收峰出现,是乙醇电氧化的最终产物,主要来自于CO_L的氧化消耗。根据实验结果讨论了PtSn/C催化剂上乙醇的电催化氧化机理。     

Direct pyrolysis and ultrasound assisted preparation of N,S co-doped graphene/Fe3C nanocomposite as an efficient electrocatalyst for oxygen reduction and oxygen evolution reactions

Bifunctional electrocatalysts to enable efficient oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) are essential for fabricating high performance metal–air batteries and fuel cells. Here, a defect rich nitrogen and sulfur co-doped graphene/iron carbide (NS-GR/Fe₃C) nanocomposite as an electrocatalyst for ORR and OER is demonstrated. An ink of NS-GR/Fe₃C is developed by homogeneously dispersing the catalyst in a Nafion containing solvent mixture using an ultrasonication bath (Model-DC150H; power − 150 W; frequency − 40 kHz). The ultrasonically prepared ink is used for preparing the electrode for electrochemical studies. In the case of ORR, the positive half-wave potential displayed by NS-GR/Fe₃C is 0.859 V (vs. RHE) and for the OER, onset potential is 1.489 V (vs. RHE) with enhanced current density. The optimized NS–GR/Fe₃C electrode exhibited excellent ORR/OER bifunctional activities, high methanol tolerance and excellent long-term cycling stability in an alkaline medium. The observed onset potential for NS–GR/Fe₃C electrocatalyst is comparable with the commercial noble metal catalyst, thereby revealing one of the best low-cost alternative air–cathode catalysts for the energy conversion and storage application.     

Synthesis, Crystal Structure and Luminescent Property of Complex [Tb0.1Gd0.9(TPTZ)(H2O)6]Cl3·3H2O

The complex [Tb_0.1Gd_0.9(TPTZ)(H₂O)₆]Cl₃·3H₂O was prepared through the reaction of 2,4,6-tris-(2-pyridyl)-1,3,5-triazine (TPTZ) with TbCl₃:GdCl₃ (0.1:0.9) in absolute ethanol at room temperature. Single crystal X-ray diffraction revealed that the metal atom is nine-coordinated with three nitrogen atoms from one TPTZ ligand and six oxygen atoms from six water molecules. The complex emits intense green fluorescence under ultraviolet light. The luminescence peaks correspond to the characteristic emission ⁵D₄→⁷F_J (J = 3–6) transitions of the Tb³⁺ ion.     

Preparation of PdAu/C-Sb2O5·SnO2 electrocatalysts by borohydride reduction process for direct formic acid fuel cell

Pd/C-Sb₂O₅·SnO₂ and PdAu/C-Sb₂O₅·SnO₂ electrocatalysts with different PdAu atomic ratio (90:10, 70:30, and 50:50) were prepared by borohydride reduction method, and characterized by X-ray diffraction, transmission electron microscopy, cyclic voltammetry, chronoamperommetry, and performance test on direct formic acid fuel cell at 100 °C. X-ray diffraction showed for Pd/C-Sb₂O₅·SnO₂ the presence of Pd face-centered cubic (fcc) system, while for PdAu/C-Sb₂O₅·SnO₂ it showed the presence of Pd fcc phase, PdAu fcc alloys and a segregated phases fcc Pd-rich and Au-rich phases. TEM micrographs and histograms for all electrocatalysts showed that the nanoparticles where not well dispersed on the support and some agglomerates were present. The electrochemical studies showed that PdAu/C-Sb₂O₅·SnO₂ (70:30) had superior performance for formic acid electro-oxidation at 25 °C compared to others electrocatalysts prepared while PdAu/C-Sb₂O₅·SnO₂ (90:10) showed superior performance in direct formic acidic fuel cell at 100 °C. These results indicated that the addition of 10–30 % Au to Pd favor the electro-oxidation of formic acid. This effect could be attributed to the synergy between the constituents of the electrocatalyst (metallic Pd and Au, SnO₂, and Sb₂O₅·SnO₂).     

Normal coordinate analysis and quantum chemical study of tris(p-fluorophenyl)antimony di(N-phenylglycinate) [(p-FC6H4)3Sb(O2CCH2NHC6H5)2]

A complete normal coordinate analysis was performed by two different methods: a classical Wilson’s G-F matrix method and the semi-empirical molecular orbital PM3 method, for a five coordinate tris(p-fluorophenyl)antimony di(N-phenylglycinate) [(p-FC₆H₄)₃Sb(O₂CCH₂NHC₆H₅)₂], known to be an in vitro antitumour molecule.      

Studies on the structural and electrical properties of spray deposited SnO2:Sb thin films as a function of substrate temperature

Thin films of antimony doped tin oxide (SnO₂:Sb) were prepared by spray pyrolysis technique using SnCl₂ as precursor with the various antimony doping levels ranging from 1 to 4 wt%. The XRD analysis showed that the undoped SnO₂ films grow in (211) preferred orientation whereas the Sb doped films grow in (200) plane. Scanning electron microscopy studies indicated that the surface of the films prepared with lower doping level (1 wt%) consists of larger grains whereas those prepared with higher doping levels (>1 wt%) consist of smaller grains. The sheet resistance has been found to be reduced considerably (2.17 Ω/□) for Sb doped films. To the best of our knowledge this is the lowest sheet resistance obtained for Sb doped SnO₂ thin films.     

Structural, optical and electrical characterization of antimony-substituted tin oxide nanoparticles

Antimony-doped tin oxide (ATO) nanostructures were prepared using chemical precipitation technique starting from SnCl₂, SbCl₃ as precursor compounds. The antimony composition was varied from 5 to 20 wt%. The lower resistance was observed at composition of Sn:95 and Sb:05, when compared with undoped and higher doping concentration of antimony. The average crystalline size of undoped and doped tin oxide was calculated from the X-ray diffraction (XRD) pattern and found to be in the range of 30-11 nm and it was further confirmed from the transmission electron microscopy (TEM) studies. The scanning electron microscopy (SEM) analysis showed that the nanoparticles agglomerates forming spherical-shaped particles of few hundreds nanometers. The samples were further analyzed by energy dispersive spectroscopy (EDS), X-ray photoelectron spectroscopy (XPS), Fourier transform infrared spectroscopy (FTIR) and electrical resistance measurements.     

High resolution XPS study of the large-band-gap semiconductor stibnite (Sb2S3): Structural contributions and surface reconstruction

Conventional X-ray photoelectron spectroscopy (XPS) and synchrotron radiation XPS (SRXPS) were used to probe the chemical state properties of stibnite (Sb₂S₃), a large-band-gap semiconductor of complex structure. The conventional spectra were obtained with a Kratos Axis Ultra XPS with magnetic confinement charge neutralization, which is very effective in minimizing both uniform charging and differential charging on this large-band-gap semiconductor. The narrow linewidths (much narrower than previously obtained) for single doublet fits (e.g. Sb 4d_5/2 of 0.57 eV and S 2p_3/2 of 0.63 eV) enabled the observation of a small peak on the low binding energy side of the Sb 3d and Sb 4d lines. With the aid of the very surface-sensitive Sb 4d SRXPS spectra, these low energy peaks are assigned to small Sb metal clusters at the surface after cleavage; the signal for these clusters increases with X-ray dose on the sample.A detailed analysis of the Sb 4d and S 2p linewidths concludes that the Sb 4d_5/2 linewidth is larger than expected based on the inherent linewidth of the instrument and the Sb 4d lifetime width, and on comparison with the As 3d linewidth (0.52 eV) for the analogous As₂S₃. Also, the S 2p_3/2 linewidth is substantially broader than the Sb 4d_5/2 linewidth. These larger than expected linewidths are due to two structurally distinct Sb atoms and three structurally distinct S atoms in the Sb₂S₃ crystal structure. Accordingly, the Sb 4d and S 2p spectra have been fitted to two and three doublets respectively, and the linewidth for all peaks is 0.53 eV. Using recent molecular orbital calculations, the doublets have been assigned to the different structural Sb and S sites.