Globotriose- and oligo(ethylene glycol)-terminated self-assembled monolayers: surface forces, wetting, and surfactant adsorption

A set of oligo(ethylene glycol)-terminated and globotriose-terminated self-assembled monolayers (SAMs) has been prepared on gold substrates. Such model surfaces are well defined and have good stability due to the strong binding of thiols and disulfides to the gold substrate. They are thus very suitable for addressing questions related to effects of surface composition on wetting properties, surface interactions, and surfactant adsorption. These issues are addressed in this report. Accurate wetting tension measurements have been performed as a function of temperature using the Wilhelmy plate technique. The results show that the nonpolar character of oligo(ethylene glycol)-terminated SAMs increases slightly but significantly with temperature in the range 20-55 degrees C. On the other hand, globotriose-terminated SAMs are fully wetted by water at room temperature. Surface forces measurements have been performed and demonstrated that the interactions between oligo(ethylene glycol)-terminated SAMs are purely repulsive and similar to those determined between adsorbed surfactant layers with the same terminal headgroup. On the other hand, the interactions between globotriose-terminated SAMs include a short-range attractive force component that is strongly affected by the packing density in the layer. In some cases it is found that the attractive force component increases with contact time. Both these observations are rationalized by an orientation- and conformation-dependent interaction between globotriose headgroups, and it is suggested that hydrogen-bond formation, directly or via bridging water molecules, is the molecular origin of these effects.     

末端硫醇化的甲氧基聚乙二醇分子自组装膜电极对碘离子的电化学分析研究

碘离子的测量方法有化学法和电化学方法等多种,电化学方法有离子选择性电极、阴极溶出伏安法等［１,２］,但以上方法易受共存离子的干扰．自组装膜修饰电极具有分子识别功能,因而可用于特定物质的检测［３］．末端硫醇化的聚乙二醇分子在金电极表面形成自组装膜后具有分子识别特性［４］,碘离子和聚乙二醇膜有较好的相容性,可以进入膜内进而到达电极表面进行反应,而其它干扰离子较难进入．因而,该膜电极能用于碘离子测定,检测下限低,并具有较强的抗干扰能力．１　实验部分１．１　试剂及仪器　甲氧基聚乙二醇（ＭＷ＝５０００）等…     

Interfacial living radical copolymerization of oil‐ and water‐soluble comonomers to form composite polymer capsules

The suspension copolymerization of methyl methacrylate with hydroxy‐functional poly(ethylene glycol) monomethacrylate (PEGMA) by atom transfer radical polymerization (ATRP) yielded soluble, controlled‐molecular‐weight amphiphilic copolymers (weight‐average molecular weight/number‐average molecular weight <1.3). Despite extensive partitioning of PEGMA into the water phase, copolymers containing up to 24 mol % PEGMA were formed in the oil phase, from comonomer feeds containing 30 mol % PEGMA. Conversions by suspension polymerization were comparable to those obtained by solution polymerization, at over 70%. Suspension copolymers with high PEGMA contents contained high‐molecular‐weight polymer formed by uncontrolled polymerization, unless poly(vinyl pyrrolidone) was added to displace the growing polymer from the interface. The addition of diethylene glycol dimethacrylate gave capsules at 17 mol % PEGMA with ATRP, whereas conventional free‐radical polymerization required 24 mol % PEGMA to form capsules. The lower PEGMA level required for capsule formation with ATRP was attributed to the lower rates of propagation and crosslinking and to improved incorporation of PEGMA into the final gels. Suspension ATRP with 24 mol % PEGMA in the feed gave two‐layer capsule walls consisting of an inner layer visible by transmission electron microscopy and an outer layer visible by both transmission electron microscopy and environmental scanning electron microscopy, which indicated a compositional gradient across the capsule wall. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 156–171, 2006     

Nanoscale Biomolecular Structures on Self‐Assembled Monolayers Generated from Modular Pegylated Disulfides

A solid‐phase synthetic strategy was developed that uses modular building blocks to prepare symmetric oligo(ethylene glycol)‐terminated disulfides with a variety of lengths and terminal functionalities. The modular disulfides, composed of alkyl amino groups linked by an amide group to oligoethylene chains were used to generate self‐assembled monolayers (SAMs), which were characterised to determine their applicability for biomolecular applications. X‐ray photoelectron spectroscopy (XPS) of the SAMs obtained from these molecules demonstrated improved stability towards displacement by 16‐hexadecanethiol, while surface plasmon resonance (SPR) analyses of SAMs prepared with the hydroxy‐terminated oligoethylene disulfide showed equal resistance to non‐specific protein adsorption in comparison to 11‐mercaptoundecyl tri(ethylene glycol). SAMs made from these adsorbates were amenable to nanoscale patterning by scanning near‐field photolithography (SNP), facilitating the fabrication of nanopatterned, protein‐functionalised surfaces. Such SAMs may be further developed for bionanotechnology applications such as the fabrication of nanoscale biological arrays and sensor devices.     

一种结构新颖的二茂铁硫醇自组装膜的电化学行为

合成二茂铁乙烯基吡啶硫醇(FcC2′PyC4SH,I)及其还原产物二茂铁乙烷基吡啶硫醇(FcC2′PyC4SH,Ⅱ).再利用分子自组装技术在金电极表面形成二茂铁乙烯基吡啶硫醇单分子膜,通过循环伏安法探讨了这种自组装膜与结构相关的电化学响应.     

Metallic contact formation for molecular electronics: interactions between vapor-deposited metals and self-assembled monolayers of conjugated mono- and dithiols

We present grazing-incidence Fourier transform infrared and AFM data of Au, Al, and Ti vapor-deposited onto self-assembled monolayers (SAMs) of conjugated mono- and dithiols. SAMs of 4,4'-dimercapto-p-quaterphenyl, 4,4"-dimercapto-p-terphenyl, and 4,4'-dimercapto-p-biphenyl have reactive thiols at the SAM/vacuum interface that interact with vapor-deposited Au or Al atoms, preventing metal penetration. Conjugated monothiols lack such metal blocking groups, and metals (Au, Al) can penetrate into their SAMs. Vapor deposition of Ti onto conjugated mono- and dithiol SAMs and onto hexadecanethiol SAMs destroys the monolayers.     

Comparison of the anchoring of nematic liquid crystals on self-assembled monolayers formed from semifluorinated thiols and alkanethiols

The anchoring of nematic liquid crystals on self-assembled monolayers (SAMs) formed by the chemisorption of semifluorinated thiols or alkanethiols on gold is compared and contrasted. The planar anchoring of 4-n-pentyl-4-cyanobiphenyl (5CB) observed in the past on SAMs formed from alkanethiols is also observed on SAMs formed from semifluorinated thiols. The azimuthal anchoring of 5CB, however, differs on these two types of surfaces: nematic 5CB anchored on SAMs formed from alkanethiols has a grainy appearance due to the formation of domains with sizes 10 mum whereas 5CB forms large domains ( 100 mum) with diffuse branches emerging from defects of strength 1/2 when anchored on SAMs formed from semifluorinated thiols. Mixed (two-component) SAMs formed from either short and long semifluorinated thiols or short and long alkanethiols cause homeotropic anchoring of 5CB. We discuss these results in light of the known differences in the structure of SAMs formed from alkanethiols and semifluorinated thiols, i.e. the tilt of the chains and conformational freedom (flexibility) of the chains within these SAMs.     

Thiol-mediated anchoring of ligands to self-assembled monolayers for studies of biospecific interactions

We report a method to immobilize thiol-containing ligands onto self-assembled monolayers (SAMs) of alkanethiolates presenting chloracetylated hexa(ethylene glycol) groups. The chloroacetyl groups react with thiols under mild basic conditions, enabling the stable immobilization of biologically active ligands in a well-defined orientation. These SAMs on gold are well suited for studies of biospecific interactions of immobilized ligands with proteins and cells. As a demonstration, we functionalized these SAMs with thiol-containing derivatives of biotin and benzene sulfonamide and observed the specific binding of neutravidin and carbonic anhydrase, respectively. We also used this method to generate mixed SAMs presenting the Arg-Gly-Asp (RGD) peptide sequence and demonstrated the integrin-mediated adhesion of fibroblast cells to these SAMs. This approach would allow the immobilization of proteins and other sensitive biomolecules and ligands for a wide variety of applications in biotechnology.     

Exhaustive glycosylation, PEGylation, and glutathionylation of a [G4]-ene(48) dendrimer via photoinduced thiol-ene coupling

We report in this paper the use of free-radical thiol-ene coupling (TEC) for the introduction of carbohydrate, poly(ethylene glycol), and peptide fragments at the periphery of an alkene functional dendrimer. Four different sugar thiols including glucose, mannose, lactose and sialic acid, two PEGylated thiols and the natural tripeptide glutathione were reacted with a fourth generation alkene functional dendrimer [G4]-ene(48) upon irradiation at λ(max) 365 nm. In all cases, the (1)H NMR spectra of the crude reaction mixture revealed the complete disappearance of alkene proton signals indicating the quantitative conversion of all 48 alkene groups of the dendrimer. With one exception only, all dendrimer conjugates were isolated in high yields (70-94%), validating the high efficiency of multiple TEC reactions on a single substrate. All isolated and purified compounds were analyzed by MALDI-TOF spectrometry and gave spectra consistent with the assigned structure.     

Self-assembled monothiol-terminated hyperbranched polyglycerols on a gold surface: a comparative study on the structure, morphology, and protein adsorption characteristics with linear poly(ethylene glycol)s

Monothiol-terminated hyperbranched polyglycerols (HPGs) were synthesized by ring-opening polymerization of glycidol from partially deprotonated 2,2'-dihydroxyethane disulfide as the initiator and subsequent reduction of the disulfide group. Two molecular weights of HPG thiols were synthesized. The molecular weights of the polymers were determined by MALDI-TOF analysis, and the presence of thiol was verified by Ellman's assay. The self-assembly of HPG thiols on gold was studied and compared with that of linear poly(ethylene glycol) (PEG) thiols utilizing various surface analysis techniques. Monothiol-functionalized HPGs readily adsorbed to a gold surface and formed highly uniform thin films on the surface. The graft density of the HPG layer decreased with an increase in the molecular weight of the polymer. The amount of polymer on the surface increased with increasing incubation concentration and saturated above 6 g/L polymer concentration. Generally, HPG thiols gave lower graft density compared to linear PEG thiols of similar molecular weight. AFM morphological studies showed that HPG thiols form more uniform and smooth surface films compared to PEG thiols. Incubation of a polymer-coated surface (HPG thiols and PEG thiols) with bovine serum albumin and immunoglobulin showed that the high molecular weight hyperbranched polyglycerol was more resistant to protein adsorption than linear PEG of similar molecular weight or lower molecular weight HPG. The protein adsorption decreased with increasing graft density of the HPG chains on the surface. Our results show that HPG could be a good alternative to PEG in the development of nonfouling functional surfaces.     

Synthesis and study of polyurethanes and polyurea urethanes based on the diamino derivatives of bis-1,3,4-oxadiazole

Polyurethanes were synthesized by condensation of diamino derivates of bis-1,3,4-oxadiazole with chloroformates, and polyurea urethanes were synthesized from diamino derivaties of bis-1,3,4-oxadiazole, diisocyanates, and ethylene glycol in a solution of dimethylformamide. Certain properties of these compounds were studied.     

In-situ characterization of self-assembled monolayers of water-soluble oligo(ethylene oxide) compounds

In-situ spectroscopic ellipsometry (SE) was utilized to examine the formation of the self-assembled monolayers (SAMs) of the water-soluble oligo(ethylene oxide) [OEO] disulfide [S(CH(2)CH(2)O)(6)CH(3)](2) {[S(EO)(6)](2)} and two analogous thiols - HS(CH(2)CH(2)O)(6)CH(3) {(EO)(6)} and HS(CH(2))(3)O(CH(2)CH(2)O)(5)CH(3) {C(3)(EO)(5)} - on Au from aqueous solutions. Kinetic data for all compounds follow simple Langmuirian models with the disulfide reaching a self-limiting final state (d=1.2nm) more rapidly than the full coverage final states of the thiol analogs (d=2.0nm). The in-situ ellipsometric thicknesses of all compounds were found to be nearly identical to earlier ex-situ ellipsometric measurements suggesting similar surface coverages and structural models in air and under water. Exposure to bovine serum albumin (BSA) shows the self-limiting (d=1.2nm) [S(EO)(6)](2) SAMs to be the most highly protein resistant surfaces relative to bare Au and completely-formed SAMs of the two analogous thiols and octadecanethiol (ODT). When challenged with up to near physiological levels of BSA (2.5mg/mL), protein adsorption on the final state [S(EO)(6)](2) SAM was only 3% of that which adsorbed to the bare Au and ODT SAMs.     

Synthesis of a series of oligo(ethylene glycol)-terminated alkanethiol amides designed to address structure and stability of biosensing interfaces.

A strategy for the synthesis of a series of closely related oligo(ethylene glycol)-terminated alkanethiol amides (principally HS(CH(2))(m)CONH(CH(2)CH(2)O)(n)H; m = 2, 5, 11, 15, n = 1, 2, 4, 6, 8, 10, 12) and analogous esters has been developed. These compounds were made to study the structure and stability of self-assembled monolayers (SAMs) on gold in the prospect of designing new biosensing interfaces. For this purpose, monodisperse heterofunctional oligo(ethylene glycols) with up to 12 units were prepared. Selective monoacylation of the symmetrical tetra- and hexa(ethylene glycol) diols as their mesylates with the use of silver(I) oxide was performed. The synthetic approach was based on carbodiimide couplings of various oligo(ethylene glycol) derivatives to omega-(acetylthio) carboxylic acids via a terminal amino or hydroxyl function. SAM structures on gold were studied with respect to thickness, wettability (water contact angles approximately 30 degrees ), and conformation. A good fit was obtained for the relation between monolayer thickness (d) and the number of units in the oligo(ethylene glycol) chain (n): d = 2.8n + 21.8 (A). Interestingly, the corresponding infrared spectroscopy analysis showed a dramatic change in conformation of the oligomeric chains from all-trans (n = 4) to helical (n > or = 6) conformation. A crystalline helical structure was observed in the SAMs for n > 6.     

Poly(ethylene glycol) monolayer formation and stability on gold and silicon nitride substrates

Poly(ethylene glycol) (PEG) self-assembled monolayers (SAMs) are extensively used to modify substrates to prevent nonspecific protein adsorption and to increase hydrophilicity. X-ray photoelectron spectroscopy analysis, complemented by water contact angle measurements, is employed to investigate the formation and stability upon aging and heating of PEG monolayers formed on gold and silicon nitride substrates. In particular, thiolated PEG monolayers on gold, with and without the addition of an undecylic spacer chain, and PEG monolayers formed with oxysilane precursors on silicon nitride have been probed. It is found that PEG-thiol SAMs are degraded after less than two weeks of exposure to air and when heated at temperatures as low as 120 degrees C. On the contrary, PEG-silane SAMs are stable for more than two weeks, and fewer molecules are desorbed even after two months of aging, compared to those desorbed in two weeks from the PEG-thiol SAMs. A strongly bound hydration layer is found on PEG-silane SAMs aged for two months. Heating PEG-silane SAMs to temperatures as high as 160 degrees C improves the quality of the monolayer, desorbing weakly bound contaminants. The differences in stability between PEG-thiol SAMs and PEG-silane SAMs are ascribed to the different types of bonding to the surface and to the fact that the thiol-Au bond can be easily oxidized, thus causing desorption of PEG molecules from the surface.     

Tuning of thermo-responsive self-assembly monolayers on gold for cell-type-specific control of adhesion

Self-assembled monolayers (SAMs) on gold containing a thermo-responsive poly( N-isopropylacrylamide)-poly(ethylene glycol)-thiol copolymer were formed. These layers show considerable potential for inducing enzyme-free and gentle detachment of cultivated cells. In an effort to optimize detachment of cells, including strongly adhering ones, two approaches are presented. First, two thermo-responsive copolymers with different poly(ethylene glycol) (PEG) contents of 15 wt % ("P15") and 19 wt % ("P19") were grafted to Au surfaces. Second, mixed monolayers were formed containing P19 and various concentrations of thiol bearing PEG. X-ray photoelectron spectroscopy (XPS) on pure and mixed P19 containing layers confirmed the expected layer compositions. Contact angle measurements showed good functionality of all surfaces prepared. Upon a temperature decrease below the lower critical solution temperature (LCST), the duration until cultivated fibroblasts detached from pure P19 surfaces was half of the one determined on P15. Strongly adherent human osteosarcoma cells could not be detached from pure P19 layers. Through co-adsorption of P19 and thiol-bearing PEG of a molar composition of 1:6, layers were formed that allowed good spreading of osteosarcoma cells above LCST and their efficient detachment below LCST.     

A facile approach for assembling lipid bilayer membranes on template-stripped gold

Lipid vesicles are designed with functional chemical groups to promote vesicle fusion on template-stripped gold (TS Au) surfaces that does not spontaneously occur on unfunctionalized Au surfaces. Three types of vesicles were exposed to TS Au surfaces: (1) vesicles composed of only 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) lipids; (2) vesicles composed of lipid mixtures of 2.5 mol % of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-poly(ethylene glycol)-2000-N-[3-(2-pyridyldithio)propionate] (DSPE-PEG-PDP) and 97.5 mol % of POPC; and (3) vesicles composed of 2.5 mol % of 1,2-distearoyl-sn-glycero-3-phosphoethanolamine-N-[methoxy(poly(ethylene glycol))-2000] (DSPE-PEG) and 97.5 mol % POPC. Atomic force microscopy (AFM) topography and force spectroscopy measurements acquired in a fluid environment confirmed tethered lipid bilayer membrane (tLBM) formation only for vesicles composed of 2.5 mol % DSPE-PEG-PDP/97.5 mol % POPC, thus indicating that the sulfur-containing PDP group is necessary to achieve tLBM formation on TS Au via Au-thiolate bonds. Analysis of force-distance curves for 2.5 mol % DSPE-PEG-PDP/97.5 mol % POPC tLBMs on TS Au yielded a breakthrough distance of 4.8 ± 0.4 nm, which is about 1.7 nm thicker than that of POPC lipid bilayer membrane formed on mica. Thus, the PEG group serves as a spacer layer between the tLBM and the TS Au surface. Fluorescence microscopy results indicate that these tLBMs also have greater mechanical stability than solid-supported lipid bilayer membranes made from the same vesicles on mica. The described process for assembling stable tLBMs on Au surfaces is compatible with microdispensing used in array fabrication.     

High-affinity adaptors for switchable recognition of histidine-tagged proteins

We aspired to create chemical recognition units, which bind oligohistidine tags with high affinity and stability, as tools for selectively attaching spectroscopic probes and other functional elements to recombinant proteins. Several supramolecular entities containing 2-4 nitrilotriacetic acid (NTA) moieties were synthesized, which additionally contained an amino group, to which fluorescein was coupled as a sensitive reporter probe. These multivalent chelator heads (MCH) (termed bis-, tris-, and tetrakis-NTA) were characterized with respect to their interaction with hexahistidine (H6)- and decahistidine (H10)-tagged targets. Substantially increased binding stability with increasing number of NTA moieties was observed by analytical size exclusion chromatography. The binding enthalpies as determined by isothermal titration calorimetry increased nearly additively with the number of possible coordinative bonds between chelator heads and tags. Yet, a substantial excess of histidines in the oligohistidine tag was required for obtaining fully additive binding enthalpies. Dissociation kinetics of MCH/oligohistidine complexes measured by fluorescence dequenching showed an increase in stability by 4 orders of magnitude compared to that of mono-NTA, and subnanomolar affinity was reached for tris-NTA. The gain in free energy with increasing multivalency was accompanied by an increasing loss of entropy, which was ascribed to the high flexibility of the binding partners. Numerous applications of these MCHs for noncovalent, high affinity, yet reversible tethering of spectroscopic probes and other functional elements to the recombinant proteins can be envisioned.     

Synthesis of Amphiphilic Guanylated Polymers as Potential Gene Delivery Carriers

Abstract

We have developed novel polymeric systems that aggregate in aqueous media to form nanospheric particles. Our polymeric system constitutes guanidine functional groups and poly(ethylene glycol) (PEG) units. The guanidine group is an important structural component in many biologically active compounds. Because of their strongly basic character, guanidines are fully protonated under physiological conditions. The positive charge thus imposed on the molecule forms the basis for specific interactions between the ligand and receptor or the enzyme and substrate. The PEG units may form a characteristic micelle structure with a hydrophilic shell layer surrounding the core of the polyion complex (PIC) formed between DNA and the cation segments (PIC micelles).     

Protein-resistant self-assembled monolayers on gold with latent aldehyde functions

In the present study, oligo(ethylene glycol) (OEG)-linked alkanethiols were synthesized which carry a vicinal diol on one end of the OEG chain. After self-assembled monolayer (SAM) formation on gold, the vicinal diols were converted into aldehyde functions by exposure to aqueous NaIO4, as previously used for SAMs with OEG chains buried in the center of the SAM [Jang et al. Nano Lett. 2003, 3, 691-694]. Mixed SAMs with latent aldehydes on 5% of the OEG termini showed high protein resistance, which greatly slowed the kinetics of protein coupling on the time scale of minutes. Small bioligands (such as biocytin hydrazide) or small heterobifunctional crosslinkers (maleimidopropionyl hydrazide, pyridyldithiopropionyl hydrazide) with hydrazide functions were efficiently bound to the aldehyde functions on the SAM, providing for specific capture of streptavidin or for fast covalent binding of proteins with free thiols or maleimide functions, respectively. In conclusion, OEG-terminated SAMs with latent aldehydes serve as protein-resistant sensor surfaces which are easily functionalized with small ligands or with heterobifunctional crosslinkers to which the bait molecule is attached in a subsequent step.     

Fabrication of biomolecular nanostructures by scanning near-field photolithography of oligo(ethylene glycol)-terminated self-assembled monolayers

The UV photo-oxidation of oligo(ethylene glycol) (OEG)-terminated self-assembled monolayers (SAMs) has been studied using static secondary ion mass spectrometry, X-ray photoelectron spectroscopy, contact angle measurement, and friction force microscopy. OEG-terminated SAMs are oxidized to yield sulfonates, but photodegradation of the OEG chain also occurs on a more rapid time scale, yielding degradation products that remain bound to the surface via gold-sulfur bonds. The oxidation of these degradation products is the rate-limiting step in the process. Photopatterning of OEG-terminated SAMs may be accomplished by using a mask and suitable light source or by using scanning near-field photolithography (SNP) in which the mask is replaced by a scanning near-field optical microscope coupled to a UV laser. Using SNP, it is possible to fabricate patterns in SAMs with a full width at half-maximum height (fwhm) as small as 9 nm, which is approximately 15 times smaller than the conventional diffraction limit. SNP-patterned OEG-terminated SAMs may be used to fabricate protein nanopatterns. By adsorbing carboxylic acid-terminated thiols into oxidized regions and converting these to active ester intermediates, it has been possible to fabricate lines of protein molecules with widths of only a few tens of nanometers.