Electron hopping dynamics in Au38 nanoparticle langmuir monolayers at the air/water interface

The electron-transfer dynamics between nanoparticles has been studied as a function of interparticle distance by in situ voltammetry of well-defined monolayers of a metal quantum dot nanoparticle Au38(hexanethiolate)24. The interparticle distance is precisely controlled by the Langmuir technique and addition of various lengths of dithiol linkers (HS(CH2)nSH; n = 5, 6, 8, and 9). Voltammograms of Au38 monolayers display a well-defined single-electron charging peak that increases remarkably with decreasing the interparticle distance. The diffusion coefficient and rate constant calculated from the peak current for core-core electron hopping reaction both exponentially increase respectively, from 3.3 x 10-10 to 5.2 x 10-9 cm2/s and 2.2 x 104 to 5.0 x 105 s-1 as the distance decreases from 13.3 to 9.5 A and then levels off at 8.0 A. These rate constants are in good agreement with the literature values, demonstrating that the present experimental approach provides a powerful way to investigate the correlation between the electron-transfer dynamics and nanoparticle assembly structure.     

Molecular dynamics simulations of amphiphilic graft copolymer molecules at a water/air interface

Fully atomistic molecular dynamics simulations of amphiphilic graft copolymer molecules have been performed at a range of surface concentrations at a water/air interface. These simulations are compared to experimental results from a corresponding system over a similar range of surface concentrations. Neutron reflectivity data calculated from the simulation trajectories agrees well with experimentally acquired profiles. In particular, excellent agreement in neutron reflectivity is found for lower surface concentration simulations. A simulation of a poly(ethylene oxide) (PEO) chain in aqueous solution has also been performed. This simulation allows the conformational behavior of the free PEO chain and those tethered to the interface in the previous simulations to be compared.     

A soliton phenomenon in langmuir monolayers of amphiphilic bistable rotaxanes

Surface pressure-area isotherms, light scattering microscopy, and atomic force microscopy have all been used to provide information about the stabilities and dynamics of Langmuir monolayers composed of amphiphilic bistable [2]rotaxane molecules. Superstructures that have the appearance of localized mobile solitons are formed during the compression of monolayers of the [2]rotaxanes below their collapse pressures. Solitons move solely in a linear trajectory in both directions across the film, perpendicular to the compression direction, without any apparent broadening or change in their shape.     

A clicked bistable [2]rotaxane

[structure: see text]. A universal diazide-terminated polyether, incorporating tetrathiafulvalene (TTF, green) and 1,5-dioxynaphthalene (DNP, red) units, was prepared and subsequently employed in the template-directed synthesis of a switchable donor/acceptor [2]rotaxane. The triazole rings (magenta), which are introduced into the rotaxane during requisite click reactions, do not present themselves as competing recognition sites for the tetracationic cyclophane (blue) as it is induced to switch between the TTF unit, when it becomes dicationic (green adorned with yellow extremities), and the DNP unit.     

Molecular dynamics simulation of amphiphilic dimers at a liquid-vapor interface

Molecular dynamics simulations are utilized to simulate a model liquid-vapor-amphiphile system. Amphiphilic surfactant molecules are modeled as dimers composed of a hydrophilic head and a hydrophobic tail. Three dimer models with three different head sizes and two different head-to-tail size ratios are studied. The surfactant molecules distribute preferentially at the interfaces at low concentrations and form micelles in the bulk liquid phase as the concentration increases. We find that the surface tension decreases as molecular concentration increases, with a reduction in the rate of decrease after micellization occurs. The extent to which a surfactant can reduce the surface tension at a given concentration is found to depend on the head size. Furthermore, the head size and concentration dependence of the surfactant tilt-angle distribution is studied and compared to experimental data.     

Molecular organization of an amphiphilic styryl pyridinium dye in monolayers at the air/water interface in the presence of various anions

Amphiphilic 4-(3',4'-dimethoxystyryl)-N-octadecylpyridinium perchlorate and bromide form stable monolayers at the air/water interface. Small differences in the surface pressure-area and surface potential-area isotherms depending on the anion indicate interactions between the chromophore and the anions on the pure water subphase. The monolayer behavior is considerably modified on 10 mM aqueous solutions of KI, KClO4, KCl, and KF as revealed by isotherm measurements, reflection spectroscopy, and Brewster angle microscopy. The phase transition observed in the isotherms is shifted to higher surface pressure because of variation of the salt according to the Hofmeister series. Upon monolayer compression, the chromophores are increasingly tilted, and a shift of the band to longer wavelengths is attributed to the environment becoming less polar. However, in the case of KCl at small areas per molecule, relaxation is observed at constant area with the appearance of a new band shifted to shorter wavelengths. This band is assigned to small associates of about four chromophores (H aggregates). In the case of KI, a new band shifted to longer wavelengths is found. Theoretical calculations did not yield a transition in the observed range, even for large aggregates (J aggregates). Therefore, other interactions may be responsible for the appearance of this band.     

Insoluble monolayers of irisresorcinol at the air/water interface

Monolayer properties of irisresorcinol [5-(cis-10-heptadecenyl) resorcinol] were measured at the air/water interface. TheA-T isobars of the monolayers at 10 and 15 mN/m gave two-dimensional thermal expansivities of 1.4 × 10^–4/K and 1.3 × 10^–4/K at a temperature span from 7–40 C, respectively. The- A isotherms of the material showed only a little dependence on temperature from 5–35 C and onpH except at highpH, where monolayers expanded by ionization of resorcinol headgroups. Some types of saccharose in the subphase exhibited a characteristic interaction with irisresorcinol in monolayers, and there is a possibility that this material will be used for molecular recognition of some saccharoses.     

Nystatin in Langmuir monolayers at the air/water interface

The paper presents a thorough characteristics of Langmuir monolayers formed at the air/water interface by a polyene macrolide antibiotic-nystatin. The investigations are based on the analysis of pi/A isotherms recorded for monolayers formed by this antibiotic at different experimental conditions. A significant part of this work is devoted to the stability and relaxation phenomena. It has been found that nystatin forms at the air/water interface monolayers of the LE state. A plateau region, observed during the course of the isotherm compression, is suggested to be due to the orientational change of nystatin molecules from horizontal to vertical position. Quantitative analysis of the desorption of the monolayer material into bulk water indicates that the solubility of nystatin monolayers increases with surface pressure. At low surface pressures, the desorption of nystatin from a monolayer is controlled both by dissolution and by diffusion. However, at the plateau and in the post-plateau region, the desorption does not achieve a steady state and the monolayer is less stable than in the pre-plateau region. However, the presence of membrane lipids, even at a low mole fraction, considerably increases the stability of nystatin monolayers. This enables the application of the Langmuir monolayer technique to study nystatin in mixture with cellular membrane components, aiming at verifying its mode of action and the mechanism of toxicity.     

Counterion-induced translational isomerism in a bistable [2]rotaxane

Translational isomerization can be induced by changing the anions associated with a bistable rotaxane in which the tetracationic cyclophane (blue box), cyclobis(paraquat-p-phenylene), encircles a dumbbell component containing bispyrrolotetrathiafulvalene (green) and a dioxynaphthalene (red) recognition sites. The rotaxane was isolated as both its hexafluorophosphate and tris(tetrachlorobenzenediolato)phosphate(v) (TRISPHAT(-)) salts. Photophysical measurements and NMR spectroscopy carried out in acetone (CD(3)COCD(3)) and acetonitrile (CD(3)CN) solutions reveal that the much larger TRISPHAT(-) anion favors predominantly the encirclement of the green site by the blue box.     

Molecular dynamics study of surfactant monolayers adsorbed at the oil/water and air/water interfaces

Atomistic molecular dynamics (MD) simulations have been carried out to investigate the physical properties of monolayers of monododecyl diethylene glycol (C(12)E(2)) surfactants adsorbed at the oil/water and air/water interfaces. The study shows that the surfactant molecules exhibit more extended conformations with a consequent increase of the thickness of the monolayer in the presence of the oil medium. It is noticed that the hydrocarbon tails of the surfactants are more vertically oriented at the oil/water interface. Interestingly, we notice that the presence of the oil medium has a strong influence in restricting both the translational and reorientational motions of the water molecules present in the hydration layer close to the surfactant headgroups.     

Molecular switch based on a cucurbit[6]uril containing bistable [3]rotaxane

A bistable CB6-based [3]rotaxane with two recognition sites has been prepared very efficiently in a high yield synthesis through CB6 catalyzed 1,3-dipolar cycloaddition; this rotaxane behaves as a reversible molecular switch and exhibits conformational changes caused by the movement of rings under base, acid and heat stimuli from one location to the other.     

Surface viscoelasticity of phospholipid monolayers at the air/water interface

The surface viscoelastic properties of monolayers of two phospholipids DPPC (L--dipalmitoylphosphatidylcholine) and DMPE (L--dimyristoylphosphatidyl-ethanolamin), at the air-water interface have been investigated. Two techniques were used for the investigation. One involved use of an interfacial shear rheometer (torsion pendulum apparatus ISR1), to provide measurements of the shear viscosity _s as a function of surface pressure, and the second, a modified LB trough with an oscillating barrier to generate periodie dilation and compression so as to measure the dilational elastic modulusE as a function of surface area.Results indicate a strong dependence of _s andE upon monolayer phases. This suggests that the viscoelastic relaxation of monolayers can be understood as molecular rearrangements, domain exchange and molecular reorientations between different monolayer states.     

Molecular dynamics simulation of four typical surfactants at oil/water interface

In the present study, we have performed molecular dynamics simulations to describe the microscopic behaviors of the anionic, nonionic, zwitterion, and gemini surfactants at oil/water interface. The abilities of reducing the interfacial tension and forming the stable interfacial film of the four surfactants have been investigated through evaluating interfacial thickness, interface formation energy and radial distribution function. The results show that the four kinds of surfactants can form in stable oil/water interface of monolayer, and the gemini surfactant can form the more stable monolayer. The results of the above three parameters demonstrate that the gemini surfactant has the best simulation effect in the four surfactants. From the calculated interfacial tension values, the gemini surfactant possess the more powerful ability of reducing the interfacial tension than others, so it is more suitable to be used as the surfactant for flooding. In addition, the effects of different electric field intensities on surfactants were calculated, through the radial distribution function of the hydrophilic group in the surfactant and the oxygen atom in the water. We have found that the adding of the periodic electric field can significantly affect the diffusion behavior of the molecules, and nonionic surfactant has stronger demulsification capability than others.     

Molecular dynamics simulation of a water/metal interface

First results of a molecular dynamics study of a water/metal interface, lasting 3.3 ps at an average temperature of 294 K, are reported. The basic periodic box contains 216 water molecules and a crystal slab of 550 platinum atoms with (100) surface planes. A combination of a Lennard-Jones potential between centers of mass and a Coulomb potential arising from dielectric interactions of the water charge distribution with the metal is employed for the water-wall interaction, the ST2 model for the water-water, and a nearest-neighbour harmonic potential for the platinum-platinum interactions. Considerable adsorption at the interface together with a drastic change of the water structure is observed.     

X-ray investigation of monolayers formed at the soft air/water interface

Gibbs or Langmuir monolayers formed at the soft air/liquid interface are easy to handle and versatile model systems for material and life sciences. The phase state of the monolayers can be modified by lateral compression of the film while the layer structural changes are monitored by highly sensitive surface characterization techniques. The use of high brilliant synchrotron light sources for X-ray experiments is essential for the monolayer research. The present review highlights the recent achievements recorded in the monolayer field with a special emphasis on different synchrotron based X-ray characterizing methods as: grazing incidence X-ray diffraction, X-ray reflectivity and total reflection X-ray fluorescence. Some examples of single-chain surfactants, special sugar lipids, and semifluorinated compounds are given. Additionally, thin layers formed by peptides, polymers or nanoparticles are highlighted.     

Anomalous spreading behaviour of polyethyleneglycoldistearate monolayers at air/water interface

Spreading behaviour of the dimeric surfactant polyethylene-glycoldistearate (PEGDS) monolayer at air/water interface has been studied using surface pressure-area (π-A) isotherms as a function of temperature. The isotherms show a plateau suggesting a transition between a liquid expanded (LE) and a condensed state. The condensed state possibly arises due to nucleation and growth of multilayers from the monolayer. Isobaric measurements of bothA-T and π-T at constant area show transitions atT = 295 K. These plots suggest a melting followed by formation of condensed microcrystallites. Structure optimization carried out using various angles of orientation of the alkyl tails with respect to the backbone in PEGDS reveals tilt transitions of the tails in different states which can be related to the packing behaviour seen in the isotherms. Optical microscopy has been used to confirm the structures in these states.     

Semifluorinated chains at the air/water interface: studies of the interaction of a semifluorinated alkane with fluorinated alcohols in mixed langmuir monolayers

Mixtures of a semifluorinated alkane 1,1,1,2,2,3,3,4,4,5,5,6,6,7,7,8,8,9,9,10,10-henicosafluorotriacontane (abbr. F10H20) and different alcohols were investigated at the air/water interface using surface pressure-area isotherms complemented with BAM images. In our studies, octadecanol and its fluorinated derivatives differing in the degree of fluorination were researched. To verify the influence of an iso branching of the fluorinated segment in an alcohol molecule, the properties of perfluorooctyldecanol and perfluoro-iso-nonyldecanol in mixtures with F10H20 were compared. From the isotherms datapoints, the excess of free energy of mixing (DeltaG(exc)) together with the interaction parameter (alpha) were calculated. On the basis of the additivity rule and BAM images, phase diagrams for all of the investigated systems were constructed. It occurs that F10H20 mixes with the fully hydrogenated alcohol, octadecanol, within the whole range of alcohol mole fractions, whereas it is completely immiscible with its perfluorinated analogue. Regarding the mixtures of F10H20 with semifluorinated alcohols, it turned out that these systems exhibit limited miscibility, i.e., are miscible at a low semifluorinated alcohol proportion, whereas upon increasing alcohol content, the systems start to demix. It may be concluded that the molecular packing in mixed monolayers is the key factor determining the miscibility of F10H20 of the investigated alcohols.