Synthesis, photophysical properties and sugar-dependent in vitro photocytotoxicity of pyrrolidine-fused chlorins bearing S-glycosides

Eight S-glycosylated 5,10,15,20-tetrakis(tetrafluorophenyl)porphyrins (1a′, 1b′, 1a and 1b (a: S-glucosylated, b: S-galactosylated)) and their 1,3-dipolar cycloadducts, i.e. chlorins 2a′, 2b′, 2a and 2b were prepared by nucleophilic substitution of the pentafluorophenyl groups with S-glycoside. These photosensitizers were characterized by ¹H, ¹³C and ¹⁹F NMR spectroscopies and elemental analysis. The photocytotoxicity of the S-glycosylated photosensitizers and the parent porphyrin (1) and chlorin (2) was examined in HeLa cells. Photosensitizers 1, 2, 1a′, 1b′, 2a′ and 2b′ showed no significant photocytotoxicity at the concentration of 0.5 μM, while the deprotected photosensitizers 1a, 1b, 2a and 2b were photocytotoxic. The strong inhibition by sodium azide of the photocytotoxicity of these photosensitizers suggested that ¹O₂ is the main mediator. The S-glucosylated photosensitizers 1a and 2a showed higher photocytotoxicity than S-galactosylated 1b and 2b, respectively. The cellular uptake of 1a and 2a increased up to 24 h, while that of 1b and 2b was saturated by 12 h.     

A ratiometric chemosensor for fluorescent determination of Hg based on a new porphyrin-quinoline dyad

Quinolin-8-ol p-[10′,15′,20′-triphenyl-5′-porphyrinyl]benzoate (1) was synthesized for the first time and developed as a ratiometric fluorescent chemosensor for recognition of Hg²⁺ ions in aqueous ethanol with high selectivity. The 1–Hg²⁺ complexation quenches the fluorescence of porphyrin at 646 nm and induces a new fluorescent enhancement at 603 nm. The fluorescent response of 1 towards Hg²⁺ seems to be caused by the binding of Hg²⁺ ion with the quinoline moiety, which was confirmed by the absorption spectra and ¹H NMR spectrum. The fluorescence response fits a Hill coefficient of 1 (1.0308), indicating the formation of a 1:1 stoichiometry for the 1–Hg²⁺ complex. The analytical performance characteristics of the chemosensor were investigated. The sensor shows a linear response toward Hg²⁺ in the concentration range of 3 × 10⁻⁷ to 2 × 10⁻⁵ M with a limit of detection of 2.2 × 10⁻⁸ M. Chemosensor 1 shows excellent selectivity to Hg²⁺ over transition metal cations except Cu²⁺, which quenches the fluorescence of 1 to some extent when it exists at equal molar concentration. Moreover, the chemosensor are pH-independent in 5.0–9.0 and show excellent selectivity for Hg²⁺ over transition metal cations.     

Cobalt(II) porphyrazine catalysed reduction of nitrite

Studies on the catalytic reduction of nitrite on carbon electrodes modified with Co(II) tetra-2,3-pyridinoporphyrazine (CoTppa, 1), N,N′,N′′,N′′′-tetramethyltetra-2,3-pyridinoporphyrazine ([CoTm-2,3-tppa]⁴⁺, 2) and Co(II) N,N′,N′′,N′′′-tetramethyltetra-3,4-pyridinoporphyrazine ([CoTm-3,4-tppa]⁴⁺, 3) are reported. There is a close correspondence between the proximity of the methyl groups to the porphyrazine ring and the catalytic activity of the porphyrazine complexes. Bulk electrolysis gave ammonia and hydroxylamine as some of the products. The catalytic activity of the cationic complex, 3, towards the detection of low concentrations of nitrite (<10⁻⁹ M) in water containing sodium sulfate, was compared with the activities of the anionic cobalt(II) tetrasulfophthalocyanine ([CoTSPc]⁴⁻, 4) and the mixed [Co^IITm-3,4-tppa]⁴⁺·[CoTSPc]⁴⁻ (5) complexes. Complex 5 showed the best catalytic activity of the three in that large currents were obtained for very low concentrations of nitrite.     

Application of a base-induced [1,2]-rearrangement to synthesize thiophosphonate bidentate S(sp2)–N monoanionic ligand: Characterization of its silver and palladium complexes

The O,O-diethyl thiophosphonate functional group has been introduced on position 2 of a pyrrole heterocycle following a two steps sequence that makes use of a [1,2] base-induced rearrangement applied for the first time to a O,O-diethyl thiophosphoramide intermediate. This rearrangement has been studied by low temperature NMR and the intermediates have been fully characterized. The coordination of this monoanionic bidentate (N,Ssp²) ligand to silver or palladium is studied The bidentate ligand 2 (O,O-diethyl pyrrol-2-ylthiophosphonate), associated with a palladium precursor, produces in the presence of triethylamine the complex trans-[Pd(η²-2′)₂] 3 (2′ is deprotonated ligand 2). Ligand 2 also reacts with silver oxide in dichloromethane to give an unstable complex 2′-Ag that can be stabilized by addition of triphenylphosphine to produce the coordination complex 4 [Ag((η²-2′)(PPh₃)₂].     

Synthesis, DNA-binding and photocleavage studies of [Ru(phen)2(pbtp)] and [Ru(bpy)2(pbtp)] (phen = 1,10-phenanthroline; bpy = 2,2′-bipyridine; pbtp = 4,5,9,11,14-pentaaza-benzo[b]triphenylene)

Based on the ligand dppz (dppz = dipyrido-[3,2-a:2′,3′-c]phenazine), a new ligand pbtp (pbtp = 4,5,9,11,14-pentaaza-benzo[b]triphenylene) and its polypyridyl ruthenium(II) complexes [Ru(phen)₂(pbtp)]²⁺ (1) (phen = 1,10-phenanthroline and [Ru(bpy)₂(pbtp)]²⁺ (2) (bpy = 2,2′-bipyridine) have been synthesized and characterized by elemental analysis, ES-MS and ¹H NMR spectroscopy. The DNA-binding of these complexes were investigated by spectroscopic methods and viscosity measurements. The experimental results indicate that both complexes 1 and 2 bind to CT-DNA in classical intercalation mode, and can enantioselectively interact with CT-DNA. It is interesting to note that the pbtp ruthenium(II) complexes, in contrast to the analogous dppz complexes, do not show fluorescent behavior when intercalated into DNA. When irradiated at 365 nm, both complexes promote the photocleavage of pBR 322 DNA.     

The d metal-sulfosalicylate complexes: Herring-bone, ladder and double-stranded chain frameworks with green luminescences

Assembly of 5-sulfosalicylic acid (H₃L) and d¹⁰ transition metal ions (Cd^II, Ag^I) with the neutral N-donor ligands produces five new complexes: [Cd₂(HL)₂(4,4′-bipy)₃]_n·2nH₂O (1), {[Cd₂(μ₂-HCO₂)₂(4,4′-bipy)₂(H₂O)₄][Cd(HL)₂(4,4′-bipy)(H₂O)₂]}_n (2), {[Cd(4,4′-bipy)(H₂O)₄][HL]·H₂O}_n (3), [Cd(HL)(dpp)₂(H₂O)]_n·4nH₂O (4), {[Ag(4,4′-bipy)][Hhbs]}_n (5) (4,4′-bipy=4,4′-bipyridine, dpp=1,3-di(pyridin-4-yl)propane, H₂hbs=4-hydroxybenzenesulfonic acid, the decarboxylation product of H₃L). Complex 1 adopts a 5-connected 3D bilayer topology. Complex 2 has the herring-bone and ladder chain, which are extended to a 3D network via hydrogen bonding. In 3–4 complexes, 3 is a 3D supermolecular structure formed by polymeric chains and 2D network of HL²⁻, while 4 gives the double-stranded chains. In 5, ladder arrays are stacked with the 2D networks of Hhbs⁻ anions in an –ABAB– sequence. Complexes 1–4 display green luminescences in solid state at room temperature, while emission spectra of 3 and 4 show obvious blue-shifts at low temperature.     

Electrochemical and DNA-binding properties of dipyridophenazine complexes of osmium(II)

A transition metal complex as an electrochemical probe of a DNA sensor must have an applicable redox potential, high binding affinity and chemical stability. Some complexes with the dipyrido[3,2-a:2′,3′-c]phenazine (DPPZ) ligand have been reported to have high binding affinity for DNA. However, it was difficult to detect the targeted DNA electrochemically using these complexes because of the relatively high redox potential. In this work, a combination of bipyridine ligands with functional groups (---NH₂, ---CH₃ and ---COOH) and the DPPZ ligand were studied. The introduction of electron-donating groups was effective for controlling the redox potential of the DPPZ-type osmium complex. The [Os(DA-bpy)₂DPPZ]²⁺ complex (DA-bpy; 4,4′-diamino-2,2′-bipyridine) had a lower half-wave potential (E_1/2) of 147 mV (vs. Ag AgCl) and higher binding affinity with DNA {binding constant, K=3.1×10⁷ M⁻¹ in 10 mmol dm⁻³ Tris–HCl buffer with 50 mmol dm⁻³ NaCl (pH 7.76)} than those of other complexes. With the single stranded DNA (ssDNA) modified gold electrode, the hybridization signal (ΔI) of the [Os(DA-bpy)₂DPPZ]²⁺ complex was linear in the concentration range of 1.0 pg ml⁻¹–0.12 μg ml⁻¹ for the targeted DNA with a regression coefficient of 0.999. The detection limit was 0.1 pg ml⁻¹.     

The synergistic effect of cobalt-dicarbollide anions on the extraction of M lanthanide cations by Calix[4]arenes: a molecular dynamics study at the water–‘oil’ interface

We report molecular dynamics studies on the effect of CCD^– (chlorinated cobalt-dicarbollide) anions on the Eu³⁺ lanthanide cation extraction by a calix[4]arene-CMPO ligand L, focusing on the water–‘oil’ interface, where ‘oil’ is modelled by chloroform. The free L ligand and its EuL³⁺ complex are found to adsorb and to concentrate at the interface, but are too hydrophilic to be extracted. Addition of CCD^– anions in diluted conditions (either covalent linked to L or as separated CCD^– H₃O⁺ ions) also leads to adsorption of these species at the interface. However, at high concentrations, CCD^– anions saturate the interface and promote the extraction of EuL³⁺ to the oil phase. Another important feature concerns the uncomplexed Eu(CCD)₃ salt: accumulation of CCD^– anions at the interface creates a negative potential which attracts the hydrated Eu³⁺ ions, therefore facilitating their complexation by interfacial ligands. These features allow us to better understand the synergistic effect of lipophilic anions in the assisted liquid-liquid extraction of trivalent M³⁺ lanthanide or actinide cations. To cite this article: B. Coupez, G. Wipf, C. R. Chimie 7 (2004).

Résumé

Synergie due aux anions dicarbollides lors de l’extraction d’ions lanthanides M³⁺ par des calix[4]arènes : simulations de dynamique moléculaire à l’interface eau–« huile ». Nous étudions par simulations de dynamique moléculaire l’effet de synergie dû aux anions CCD^– (cobalt-dicarbollides) lors de l’extraction de Eu³⁺ par un calix [4]arène L, en se focalisant sur l’interface eau–« huile », l’huile étant modélisée par du chloroforme. On montre que le ligand L et son complexe EuL³⁺ s’adsorbent à l’interface, mais sont trop hydrophiles pour être extraits. L’addition d’anions CCD^– (qu’ils soient sous la forme d’ions CCD^– H₃O⁺ séparés ou greffés de façon covalente au calixarène) conduit aussi à l’adsorption de ces espèces à l’interface. Cependant, aux plus fortes concentrations, les anions CCD^– saturent l’interface et induisent l’extraction du complexe EuL³⁺ vers l’huile. Un autre résultat remarquable concerne les sels Eu(CCD)₃ : l’accumulation des anions CCD^– à l’interface y crée un potentiel négatif, ce qui attire les cations Eu³⁺ et facilite ainsi leur complexation par des ligands à l’interface. Ces résultats permettent de mieux comprendre l’effet de synergie dû aux anions CCD^– lors de l’extraction d’ions lanthanides ou actinides M³⁺ et, d’une manière générale, ce qui se passe à l’interface entre l’eau et des liquides non miscibles. Pour citer cet article : B. Coupez, G. Wipf, C. R. Chimie 7 (2004).     

Palladium acetate complexes bearing chelating N-heterocyclic carbene (NHC) ligands: Synthesis and catalytic oxidative homocoupling of terminal alkynes

The imidazolium salts 1,1′-dibenzyl-3,3′-propylenediimidazolium dichloride and 1,1′-bis(1-naphthalenemethyl)-3,3′-propylenediimidazolium dichloride have been synthesized and transformed into the corresponding bis(NHC) ligands 1,1′-dibenzyl-3,3′-propylenediimidazol-2-ylidene (L₁) and 1,1′-bis(1-naphthalenemethyl)-3,3′-propylenediimidazol-2-ylidene (L₂) that have been employed to stabilize the Pd^II complexes PdCl₂(κ²-C,C-L₁) (2a) and PdCl₂(κ²-C,C-L₂) (2b). Both latter complexes together with their known homologous counterparts PdCl₂(κ²-C,C-L₃) (1a) (L₃ = 1,1′-dibenzyl-3,3′-ethylenediimidazol-2-ylidene) and PdCl₂(κ²-C,C-L₄) (1b) (L₄ = 1,1′-bis(1-naphthalenemethyl)-3,3′-ethylenediimidazol-2-ylidene) have been straightforwardly converted into the corresponding palladium acetate compounds Pd(κ¹-O-OAc)₂(κ²-C,C-L₃) (3a) (OAc = acetate), Pd(κ¹-O-OAc)₂(κ²-C,C-L₄) (3b), Pd(κ¹-O-OAc)₂(κ²-C,C-L₁) (4a), and Pd(κ¹-O-OAc)₂(κ²-C,C-L₂) (4b). In addition, the phosphanyl-NHC-modified palladium acetate complex Pd(κ¹-O-OAc)₂ (κ²-P,C-L₅) (6) (L₅ = 1-((2-diphenylphosphanyl)methylphenyl)-3-methyl-imidazol-2-ylidene) has been synthesized from corresponding palladium iodide complex PdI₂(κ²-P,C-L₅) (5). The reaction of the former complex with p-toluenesulfonic acid (p-TsOH) gave the corresponding bis-tosylate complex Pd(OTs)₂(κ²-P,C-L₅) (7). All new complexes have been characterized by multinuclear NMR spectroscopy and elemental analyses. In addition the solid-state structures of 1b·DMF, 2b·2DMF, 3a, 3b·DMF, 4a, 4b, and 6·CHCl₃·2H₂O have been determined by single crystal X-ray structure analyses. The palladium acetate complexes 3a/b, 4a/b, and 6 have been employed to catalyze the oxidative homocoupling reaction of terminal alkynes in acetonitrile chemoselectively yielding the corresponding 1,4-di-substituted 1,3-diyne in the presence of p-benzoquinone (BQ). The highest catalytic activity in the presence of BQ has been obtained with 6, while within the series of palladium-bis(NHC) complexes, 4b, featured with a n-propylene-bridge and the bulky N-1-naphthalenemethyl substituents, revealed as the most active compound. Hence, this latter precursor has been employed for analogous coupling reaction carried out in the presence of air pressure instead of BQ, yielding lower substrate conversion when compared to reaction performed in the presence of BQ. The important role of the ancillary ligand acetate in the course of the catalytic coupling reaction has been proved by variable-temperature NMR studies carried out with 6 and 7′ under catalytic reaction conditions.     

Optical detection of Cu ion using a SQ-dye containing polymeric thin-film on Au surface

In this study, we have fabricated Cu²⁺ ion sensor using a squarylium dye (SQ-dye) containing polymeric thin-film. Surface Plasmon Resonance (SPR) was used as a signal amplifier to achieve high sensitivity and large linear dynamic range for detection of Cu²⁺ ion. High selectivity to Cu²⁺ ion was obtained by the effective electro-static interaction between SQ-dye and Cu²⁺ ion in the polymeric film. The optimal analytical condition of high selectivity and sensitivity in the wider linear dynamic range obtained in this study may be a result of the cooperative ‘hard-soft’ metal ion-ligand interaction and effective detection of refractive index changes by the complexation of Cu²⁺ ion and SQ-dye in SPR measurement. Among 10 different alkali metal, alkaline earth metal, and transition metal ions, SQ-dye in poly(vinylchloride)–poly(vinyl acetate)–poly(vinyl alcohol) (PVC–PVAc–PVA) copolymer film showed the highest selectivity to Cu²⁺ ion. Although the interaction between SQ-dye and metal ions has not been well understood, both cooperative ‘hard-soft’ metal ion-ligand interaction and size-selective recognition of Cu²⁺ ion to SQ-dye may contribute to high selectivity. Furthermore, additional sensitivity in the detection of Cu²⁺ ion by SPR was obtained by matching the wavelength of probing radiation of SPR and absorption maximum of SQ-dye at 675 nm, which allow to detect small changes in the refractive index by complex formation on the sensing surface. This result may apply in development of the Cu²⁺ ion selective sensor for medical, biochemical, and environmental applications.     

C-Glucosylflavonoid biosynthesis from 2-hydroxynaringenin by Desmodium uncinatum (Jacq.) (Fabaceae)

[2′,3′,5′,6′-²H₄]-2-Hydroxynaringenin is synthesised and incubated with commercially available UDP-glucose and the crude protein extract from Desmoduim uncinatum leaves. The organic extract produces isotopically labelled [2′,3′,5′,6′-²H₄]-vitexin and [2′,3′,5′,6′-²H₄]-isovitexin. Repeating the experiment with denatured protein or replacing the 2-hydroxynaringenin with [2′,3′,5′,6′-²H₄]-apigenin or [2′,3′,5′,6′-²H₄]-naringenin results in no observable incorporation. 2-Hydroxynaringenin is therefore the substrate for C-glucosylflavonoid biosynthesis in D. uncinatum.     

Benzimidazole-based ratiometric fluorescent receptor exhibiting molecular logic gate for Cu and Fe

We synthesized a novel fluorescent receptor based upon a benzimidazole moiety in a dipodal framework. The receptor exhibited a dual fluorescence emission which is quenched upon addition of Cu²⁺ or Fe³⁺. Interestingly, the receptor offers a ratiometric property and an ‘OR’ logic gate property to Cu²⁺ and Fe³⁺.     

DNA binding and oxidative cleavage activity of ternary (l-proline)copper(II) complexes of heterocyclic bases

Ternary copper(II) complexes [Cu(l-pro)(B)(H₂O)](NO₃) (1, 2) where l-pro = l-proline, B is a N,N-donor heterocyclic base, viz. 2,2′-bipyridine (bpy, 1), 1,10-phenanthroline (phen, 2), are synthesized, characterized, and their DNA binding and cleavage activity studied. The bpy complex (1) is structurally characterized by single-crystal X-ray crystallography. The complexes show the presence of a distorted square-pyramidal (4 + 1) CuN₃O₂ coordination geometry. Complex [Cu(l-pro)(bpy)(H₂O)](NO₃) (1) crystallizes in the triclinic space group P1 with unit cell parameters: a = 7.082(3) Å, b = 10.483(5) Å, c = 11.581(5) Å, α = 89.700(7)°, β = 83.488(8)°, γ = 84.109(8)° and V = 849.7(7) Å³. The one-electron paramagnetic complexes display a d–d band near 600 nm in water and show a cyclic voltammetric response due to Cu(II)/Cu(I) couple near 0.1 V (versus SCE) in Tris–HCl buffer–0.1 M KCl. Binding interactions of the complexes with calf thymus (CT) DNA have been investigated by emission, absorption, viscosity and DNA thermal denaturation studies. The phen complex displays significant binding propensity to the CT DNA giving an order: 2 (phen)  1 (bpy). The bpy complex does not show any apparent binding to the DNA and hence poor cleavage efficiency. Complex 2 shows efficient oxidative cleavage of SC-DNA in the presence of 3-mercaptopropionic acid (MPA) involving hydroxyl radical species as evidenced from the control data showing inhibition of DNA cleavage in the presence of DMSO and catalase.     

Hydrothermal syntheses, crystal structures of three new organic–inorganic hybrids constructed from Keggin-type [BW12O40] clusters and transition metal complexes

Three new organic–inorganic hybrid compounds constructed from Keggin-type polyanions and transition metal complexes, [Mn(2,2′-bipy)₃]_1.5[BW₁₂O₄₀Mn(2,2′-bipy)₂(H₂O)]·0.25H₂O (1), [Fe(2,2′-bipy)₃]_1.5[BW₁₂O₄₀Fe(2,2′-bipy)₂(H₂O)]·0.5H₂O (2) and [Cu₂(phen)₂(OH)₂]₂H[Cu(H₂O)₂{BW₁₂O₄₀Cu_0.75(phen)(H₂O)}₂]·1.5H₂O (3), have been hydrothermally synthesized and characterized by elemental analyses, IR, TGA and single-crystal X-ray diffraction. Compounds 1 and 2 are isostructural and both exhibit monosupporting polyoxometalate cluster structure, each of which contains a [BW₁₂O₄₀]⁵⁻ cluster decorated by one transition metal complex. Compound 3 contains a bisupporting polyoxometalate cluster anion where two {Cu_0.75(phen)(H₂O)}^0.75+ fragments are supported on the polyoxometalate dimer {Cu(H₂O)₂(BW₁₂O₄₀)₂}⁸⁻, this represents the first bisupporting polyoxometalate cluster based on a Keggin-type polyoxometalate dimer, which are further packed together via π–π stacking contacts into an extended 1-D chain.     

Synthesis and DNA cleavage properties of ternary Cu(II) complexes containing histamine and amino acids

The ternary complexes of [Cu^II(Hist)(Tyr)]⁺1 and [Cu^II(Hist)(Trp)]⁺2 have been synthesized, structurally characterized and their DNA binding and cleavage abilities probed. The intrinsic binding constants (K_b) for complexes/CT-DNA were also determined (K_b = 2.7 × 10² for complex 1 and K_b = 2.2 × 10² for complex 2). These complexes exhibit their nuclease activity on plasmid DNA, which seems to depend on the nature of the aromatic moiety. The DNA hydrolytic cleavage rate constants were also determined for complexes 1 and 2, which are 0.91 and 0.79 h⁻¹, respectively.     

Catalyzed Peptide Bond Formation in the Gas Phase. Role of Bivalent Cations and Water in Formation of 2-Aminoacetamide from Ammonia and Glycine and in Dimerization of Glycine

The formation of 2-aminoacetamide from ammonia and glycine and N-glycylglycine from two glycine molecules with and without Mg²⁺, Cu²⁺, and Zn²⁺ cations as catalysts have been studied as model reactions for peptide bond formation using the B3LYP functional with 6–311+G(d,p) and 6–31G(d) basis sets. The B3LYP method was also used to characterize the nine gas–phase complexes of neutral glycine, its amide (2-aminoacetamide), and N-glycylglycine with Lewis acids Mg²⁺, Cu²⁺, and Zn²⁺, respectively. Further, the gas-phase hydration of metal-coordinated complexes of glycine, 2-aminoacetamide, and N-glycylglycine was also investigated. Finally, the effect of water on the structure and reactivity of the metal coordinated complexes was determined. Enthalpies and Gibbs energies for the stationary points of each reaction have been calculated to determine the thermodynamics of the reactions investigated. A substantial decrease in reaction enthalpies and Gibbs energies was found for glycine–ammonia and glycine–glycine reactions coordinated by Mg²⁺, Cu²⁺, and Zn²⁺ ions compared to those of the uncoordinated 2-aminoacetamide bond formation. The formation of a dipeptide is a more exothermic process than the creation of simple 2-aminoacetamide from glycine. The energetic effect of the transition metal ions Cu²⁺ and Zn²⁺ is of similar strength and more pronounced than that of the Mg²⁺ cation. The basicity order of the amides investigated shows the order: NH₂CH₂CO₂H < NH₂CH₂CONH₂ < NH₂CH₂CONHCH₂CO₂H. Interaction enthalpies and Gibbs energies of metal ion–amide complexes increase as Mg²⁺2+2+. In both reactant (glycine) and reaction products (2-aminoacetamide, N-glycylglycine) dihydration caused considerable reduction (about 200–500 kJ-mol^–1) of the strength of the bifurcated metal–amide bonds. Solvent effects also reduce the reaction enthalpy and Gibbs energy of reactions under study.     

Heterometallic clusters arising from cubic Ni3M′O4 (M′=K and Na) entity: Solvothermal synthesis with/without the assistance of microwave

Solvothermal reaction assisted with microwave leads to the formation of two unique heterometallic cubic clusters [Ni₃M′(L)₃(OH)(CH₃CN)₃]₂·CH₃CN (M′=K for 1 and M′=Na for 2, where L is an anion of 2-[(2-hydroxy-3-methoxy-benzylidene)-amino]-ethanesulfonate) with higher efficiency, yields and purity than those without it. The 6-metallacrown-3 [Ni₃(OH)(L)₃]⁻ groups exhibit interesting ion trapping and self-assembly of size-different Na⁺ and K⁺ through form recognition and coordination activity in 1 and 2. The magnetic studies for 1 and 2 suggest that the {Ni₃M′O₄} (M′=K and Na) cores both display dominant ferromagnetic interactions from the nature of the binding modes of μ₃-O (oxidophenyl) and μ₃-OH.     

Artificial metallo-DNA towards discrete metal arrays

DNA shows promise as a provider of a structural basis for the “bottom-up” fabrication of functionalized molecular building blocks. In particular, the replacement of hydrogen-bonded DNA base pairing for alternative one could possibly provide a novel tool for re-engineering DNA as well as for biological applications. This review describes our recent approaches to metal-based strategy directed towards self-assembled metal arrays within DNAs. Recently, we reported the synthesis of a series of artificial oligonucleotides, d(5′-G H _nC-3′) (n = 1-5), using hydroxypyridone nucleobases ( H ) as flat bidentate ligands. Right-handed double helices of the oligonucleotides, nCu²⁺·d(5′-G H _nC-3′)₂ (n = 1-5), are quantitatively formed through Cu²⁺-mediated alternative base pairing ( H -Cu²⁺- H ), where the Cu²⁺ ions are aligned along the helix axes inside the duplexes with the Cu²⁺-Cu²⁺ distance of 3.7 ± 0.1 Å. The Cu²⁺ ions are coupled in a ferromagnetic manner with one another through unpaired d electrons to form magnetic chains. This strategy represents a new method for self-assembled metal arrays in a predesigned fashion, leading to the possibility of metal-based molecular devices such as molecular magnets and wires.     

Quenching effect of some heavy metal ions on the fast peroxyoxalate-chemiluminescence of 1-(dansylamidopropyl)-1-aza-4,7,10-trithiacyclododecane as a novel fluorophore

The fast chemiluminescence (CL) arising from the reaction of bis(2,4,6-trichlorophenyl)oxalate (TCPO) with hydrogen peroxide in the presence of 1-(dansylamidopropyl)-1-aza-4,7,10-trithiacyclododecane (L) as a novel fluorophore, and imidazole as catalyst, has been studied in ethyl acetate solution. The relationships between the chemiluminescence intensity and concentrations of TCPO, imidazole, hydrogen peroxide and L are reported. In the presence of imidazole as catalyst, the entire CL signal was completed in less than 3 s. The quenching effect of Cu²⁺, Pb²⁺, Cd²⁺, Hg²⁺ and Ag⁺ ions on the chemiluminescent system was investigated, the resulting Stern–Volmer plots were obtained and the K_Q values were calculated. It was found that the quenching effect of metal ions on the chemiluminescence of L decreases in the order Cu²⁺ > Pb²⁺ > Cd²⁺ > Hg²⁺ > Ag⁺.     

Preparation of new dinuclear half-titanocene complexes with ortho- and meta-xylene linkages and investigation of styrene polymerization

Half-titanocene is well-known as an excellent catalyst for the preparation of SPS (syndiotactic polystyrene) when activated with methylaluminoxane (MAO). Dinuclear half-sandwich complexes of titanium bearing a xylene bridge, (TiCl₂L)₂{(μ-η⁵, η⁵-C₅H₄-ortho-(CH₂–C₆H₄–CH₂)C₅H₄}, (4 (L = Cl), 7 (L = O-2,6-iPr₂C₆H₃)) and (TiCl₂L)₂{(μ-η⁵, η⁵-C₅H₄-meta-(CH₂–C₆H₄–CH₂)C₅H₄} (5 (L = Cl), 8(L = O-2,6-iPr₂C₆H₃)), have been successfully synthesized and introduced for styrene polymerization. The catalysts were characterized by ¹H- and ¹³C NMR, and elemental analysis. These catalysts were found to be effective in forming SPS in combination with MAO. The activities of the catalysts with rigid ortho- and meta-xylene bridges were higher than those of catalysts with flexible pentamethylene bridges. The catalytic activity of four dinuclear half-titanocenes increased in the order of 4 < 5 < 7 < 8. This result displays that the meta-xylene bridged catalyst is more active than the ortho-xylene bridged and that the aryloxo group at the titanium center is more effective at promoting catalyst activity compared to the chloride group at the titanium center. Temperature and ratio of [Al]:[Ti] had significant effects on catalytic activity. Polymerizations were conducted at three different temperatures (25, 40, and 70 °C) with variation in the [Al]:[Ti] ratio from 2000 to 4000. It was observed that activity of the catalysts increased with increasing temperature, as well as higher [Al]:[Ti]. Different xylene linkage patterns (ortho and meta) were recognized to be a principal factor leading to the characteristics of the dinuclear catalyst due to its different spatial arrangement, causing dissimilar intramolecular interactions between the two active sites.