Adsorption behavior of statherin and a statherin peptide onto hydroxyapatite and silica surfaces by in situ ellipsometry

The salivary protein statherin is known to adsorb selectively onto hydroxyapatite (HA), which constitutes the main mineral of the tooth enamel. This adsorption is believed to be crucial for its function as an inhibitor of primary (spontaneous) and secondary (crystal growth) precipitation of calcium phosphate salts present in saliva. A fragment corresponding to the first 21 N-terminus amino acids of statherin (StN21) was previously found to reduce the rate of demineralization of HA. Therefore, the interfacial properties of this peptide and statherin onto silica, hydrophobized silica and HA discs was studied by in situ ellipsometry. Their reversibility induced by dilution and elutability induced by buffer and sodium dodecyl sulfate (SDS) was also determined. The results revealed that statherin adsorbed at a greater extent onto the HA as compared to StN21, suggesting that the hydrogen bonding between the uncharged polar residues at the C-terminal region of statherin and HA contributes to its adsorption. However, on both silica surfaces the peptide adsorption appeared to proceed in a similar way. Onto the hydrophobized silica the adsorption of both peptides was suggested to occur either via multilayer formation or adsorption of aggregates from solution, while onto the hydrophilic silica adsorption of peptide aggregates from solution was the suggested mechanism. Further, both peptides were observed to be strongly adsorbed onto HA, even after SDS treatment, in comparison to the layers adsorbed onto hydrophobized silica. Both peptide layers were found to be weakly adsorbed onto the hydrophilic silica surface as they were totally removed by buffer dilution.     

Kinetics of conformational changes of fibronectin adsorbed onto model surfaces

Fibronectin (FN), a large glycoprotein found in body fluids and in the extracellular matrix, plays a key role in numerous cellular behaviours. We investigate FN adsorption onto hydrophilic bare silica and hydrophobic polystyrene (PS) surfaces using Fourier transform infrared spectroscopy-attenuated total reflection (FTIR-ATR) in aqueous medium. Adsorption kinetics using different bulk concentrations of FN were followed for 2h and the surface density of adsorbed FN and its time-dependent conformational changes were determined. When adsorption occurs onto the hydrophilic surface, FN molecules keep their native conformation independent of the adsorption conditions, but the amount of adsorbed FN increases with time and the bulk concentration. Although the protein surface density is the same on the hydrophobic PS surface, this has a strong impact on the average conformation of the adsorbed FN layer. Indeed, interfacial hydration changes induced by adsorption onto the hydrophobic surface lead to a decrease in unhydrated beta-sheet content and cause an increase in hydrated beta-strand and hydrated random domain content of adsorbed FN. This conformational change is mainly dependent on the bulk concentration. Indeed, at low bulk concentrations, the secondary structures of adsorbed FN molecules undergo strong unfolding, allowing an extended and hydrated conformation of the protein. At high bulk concentrations, the molecular packing reduces the unfolding of the stereoregular structures of the FN molecules, preventing stronger spreading of the protein.     

Atomic force microscopy study of salivary pellicles formed on enamel and glass in vivo

This study was performed to evaluate the use of atomic force microscopy (AFM) in examining the surface of the adsorbed layer of salivary proteins (salivary pellicle) formed in vivo on dental enamel and glass surfaces. Enamel and glass test pieces were attached to the buccal surfaces of the upper first molar teeth in two adults using removable intraoral splints. The splints were carried intraorally over periods ranging from 10 min to1 h. Using the contact mode of AFM, pellicle structures could be recognised on intraorally exposed specimens compared to nonexposed enamel and glass surfaces. The surface of the adsorbed salivary pellicle was characterised by a dense globular appearance. The diameter of the globulelike protein aggregates adsorbed onto enamel and glass varied between 80 and 200 nm and 80 and 150 nm, respectively. The structure of the adsorbed protein layer was clearly visible on glass surfaces, even though minor differences in the protein layer between glass and enamel specimens were observed. This study indicates that AFM is a powerful tool for high-resolution examination of the salivary pellicle surface structure in its native (hydrated) state. AFM avoids artefacts due to fixing, dehydration and sputter-coating which occur with scanning electron microscopic analyses. Received: 29 November 2000 Accepted: 14 December 2000     

Adsorption behavior and mechanism of Cu(II) onto carbonate-substituted hydroxyapatite in the presence of humic acid

In this study, adsorption behavior and mechanism of Cu(II) onto carbonate-substituted hydroxyapatite (CHAP) in the absence and presence of humic acid (HA) were studied in batch experiments. The results showed that carbonate incorporation in HAP could significantly enhance the adsorption of Cu(II). In ternary systems, the presence of HA led to an increase in Cu(II) adsorption, dependent on HA concentration. Kinetic studies showed that pseudo-second-order kinetic model better described the adsorption process of Cu(II) onto CHAP and equilibrium data were best described by Sips models. The order of addition sequences of substrates was found to have a noticeable effect on Cu(II) adsorption onto CHAP. The general trend with respect to Cu(II) adsorption being: (CHAP–Cu)–HA?>?(CHAP–HA)–Cu?>?(Cu–HA)–CHAP. The present findings were important for estimating and optimizing the removal of Cu(II) ions by using CHA as a potential adsorbent.     

Adsorption and bioactivity studies of albumin onto hydroxyapatite surface

Bovine serum albumin (BSA) may have an inhibitory or promoter effect on hydroxyapatite (HA) nucleation when apatite is precipitated in a medium containing the protein. In this study we evaluated the influence of BSA on the precipitation of calcium phosphate phases (CP) from simulated body fluid (SBF) when the protein was previously bounded to HA surface. The kinetics of BSA immobilization onto hydroxyapatite surface was performed in different buffers and protein concentrations in order to adjust experimental conditions in which BSA was tightly linked to HA surface for long periods in SBF solution. It was shown that for BSA concentration higher than 0.1mg/mL the adsorption to HA surface followed Langmuir-Freundlich mechanisms, which confirmed the existence of cooperative protein-protein interactions on HA surface. Fourier Transformed Infrared Attenuated Total Reflectance Microscopy (FTIRM-ATR) evidenced changes in BSA conformational state in favor of less-ordered structure. Analyses from high resolution grazing incident X-ray diffraction using synchrotron radiation (GIXRD), Scanning Electron Microscopy (SEM) and Atomic Force Microscopy (AFM) showed that a poorly crystalline calcium phosphate was precipitated on the surface of HA discs coated with BSA, after the immersion in SBF for 4 days. The new bioactive layer had morphological characteristics similar to the one formed on the HA surface without protein. It was identified as a carbonated apatite with preferential crystal growth along apatite 002 direction. The GIXRD results also revealed that BSA layer bound to the surface inhibited the HA dissolution leading to a reduction on the formation of new calcium phosphate phase.     

蛋白质在羟基磷灰石界面吸附的研究

考察了酪蛋白酸钠(sodium caseinate,SC)和乳清分离蛋白(whey protein isolate,WPI)在表面性质不同的3种羟基磷灰石(hydroxyapatite,HA)颗粒上的界面吸附,分析了蛋白质的分子构型和HA颗粒的表面性质等因素对蛋白质在HA界面吸附的影响,重点讨论了SC和WPI肽链上磷酸化丝氨酸基团(phosphorylated serine residues,Ser-P)的数量和分布对吸附差异的影响.通过傅里叶变换红外光谱和表面电位分析发现SC和WPI无法被比表面积较小的HA颗粒有效吸附,但是在有效吸附面积较高的球状纳米HA和棒状微米HA上能够被吸附.Ser-P的存在使得SC在HA界面的吸附量更高、吸附能力更强.Ser-P数量和分布的不同则导致了SC中不同的蛋白组分在HA界面的竞争性吸附:β-酪蛋白在2μmHA界面始终存在优先吸附性;当纳米HA的浓度低于15 mg/mL时,纳米HA界面会优先吸附αs-酪蛋白.     

Adsorption and spectroscopic characterization of lactoferrin on hydroxyapatite nanocrystals

Lactoferrin (LF), a well-characterized protein of blood plasma and milk with antioxidant, cariostatic, anticarcinogenic and anti-inflammatory properties, has been adsorbed onto biomimetic hydroxyapatite (HA) nanocrystals at two different pH values (7.4 and 9.0). The interaction was herein investigated by spectroscopic, thermal and microscopic techniques. The positive electrostatic surface potential of LF at pH 7.4 allows a strong surface interaction with the slightly negative HA nanocrystals and avoids the protein-protein interaction, leading to the formation of a coating protein monolayer. In contrast, at pH 9.0 the surface potential of LF is a mix of negative and positive zones favouring the protein-protein interaction and reducing the interaction with HA nanocrystals; as a result a double layer of coating protein was formed. These experimental findings are supported by the good fittings of the adsorption isotherms by different theoretical models according to Langmuir, Freundlich and Langmuir-Freundlich models. The nanosized HA does not appreciably affect the conformation of the adsorbed protein. In fact, using FT-Raman and FT-IR, we found that after adsorption the protein was only slightly unfolded with a small fraction of the α-helix structure being converted into turn, while the β-sheet content remained almost unchanged. The bioactive surface of HA functionalized with LF could be utilized to improve the material performance towards the biological environment for biomedical applications.     

Chitosan adsorption on hydroxyapatite and its role in preventing acid erosion

Polymer adsorption onto an artificial saliva (AS) layer is investigated using quartz-crystal microbalance with dissipation (QCM-D) and chitosan as the model polymer. QCM-D is utilized in an innovative manner to monitor in situ adsorption of chitosan (CH) onto a hydroxyapatite (HA) coated crystal and to examine the ability of the adsorbed layer to "protect" the HA upon sequential exposure to acidic solutions. After deposition of a thin AS layer (16nm), the total thickness on the HA substrate increases to 37nm upon exposure to CH at pH 5.5 for 10min. Correspondingly, the surface charge changes from negative (i.e., AS) to positive, consistent with the adsorption the polycationic CH onto or into the AS layer. Upon exposure to an oxidizing agent, the chitosan cross-links and collapses as noted by a decrease in thickness to 10nm and an increase in the shear modulus by an order of magnitude. Atomic force microscopy (AFM) is used to determine the surface morphology and RMS roughness of the coated and HA surfaces after citric acid challenges. Both physisorbed and cross-linked chitosan are demonstrated to limit and prevent the erosion of HA, respectively.     

Characterization of adsorption of humic acid onto alumina using quartz crystal microbalance with dissipation

In this paper, a quartz crystal microbalance with dissipation monitoring (QCM-D) is used to investigate humic acid (HA) adsorption onto alumina (Al(2)O(3)). The amount of adsorption and layer structures of HA were determined by the real-time monitoring of resonance frequency and energy dissipation changes (Δf and ΔD). The effect of HA concentration, HA molecular characteristics (molecular weight and polarity), and pH on HA adsorption onto Al(2)O(3) were investigated. The mass of HA adsorption increases as the concentration of HA increases. The masses are about 24, 60, and 87 ng cm(-2) as the concentration of DOC is 1.0, 4.85, and 92.0 mg L(-1), respectively. The adsorbed layer of HA is more nonrigid, and the mass of HA adsorption is higher at weakly acidic pH values. It was 20, 80, 65, and 45 ng cm(-2) at pH values of 4.5, 5.5, 6.5, and 8.0, respectively. This reveals that efficient HA removal by coagulation at weakly acidic pH values is not just due to the hydrolysis of Al ions as previously presumed. The adsorbed layer of hydrophobic HA is more nonrigid than hydrophobic HA (fractionated by Amberlite XAD-8 resin), and the mass adsorption for the hydrophobic fraction is about four times higher than the hydrophilic fraction (120 ng cm(-2) and 30 ng cm(-2)). The method is of value in the research to establish a quantified calculation model for the coagulation process.     

BSA与羟磷灰石相互吸附的FTIR-ATR光谱

采用傅里叶变换红外衰减全反射(FTIR-ATR)光谱法对牛血清白蛋白(BSA)在羟磷灰石(HA)[Ca₁₀(OH)₂(PO₄)₆]表面不同时间的相互吸附作用进行了表征。在BSA溶液作用下,羟磷灰石表面的Ca²⁺、PO₄^3-和OH^-离子初始的溶解和再沉淀使得BSA与HA相互作用层层叠加,在HA表面形成从表层到次表层分子都包含有吸附的BSA的覆盖层,从而加深两者之间的相互作用。经红外差谱法处理过的相关ATR数据表明, BSA与HA之间的相互作用是快速的,并随时间变化进一步加强;来自HA上PO₄^3-的P=O基团对蛋白质肽键的酰胺II带(―CNH)、多肽链的甲基(―PO₃)和亚甲基(―CH₂)上氢的吸附作用要比P―O快速而且强烈。Ca²⁺在该吸附过程中起了极其重要的作用,其快速与蛋白质肽键的羰基氧发生作用,并诱导该蛋白质二级结构由β-折叠向α-螺旋和β-转角构象转变;伴随着这一构象变化,蛋白质多肽链上大多数肽键的―C=O和H―N―活性基团从链间氢键交联中释放出来,带动众多的氢分别参与同HA表面的Ca²⁺、PO43-和OH^-离子的相互吸附作用,并牢牢地结合于HA表面;这对硬组织的再生起着重要作用,促进了HA的生物矿化过程。     

Base-atom recognition in protein adsorption to alkyl agaroses.

The three proteins phosphorylase b, calmodulin and fibrinogen are adsorbed onto thioalkyl derivatives of Sepharose much more strongly than onto gels carrying the same alkyl residue coupled via a carbamate linkage. This enhancement of binding onto alkyl-S-Sepharoses compared with alkyl-N-agaroses is not primarily due to an increase in the extent of conformational changes of the proteins occurring on the gel surface. This can be shown in experiments with the tripeptide Trp-Trp-Trp. The Trp tripeptide is also adsorbed with a much higher affinity to butyl-S-Sepharose than to butyl-N-Sepharose, showing that the primary interaction between the immobilized alkyl residue and the amino acids of the protein is decisive for adsorption. A model stressing the strong influence of an atom or a group of atoms at the base of an immobilized alkyl residue is described as "base-atom recognition".     

Application of diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) for the identification of potential diagenesis and crystallinity changes in teeth

During burial, diagenetic alteration can invalidate the paleodietary signature, which the hydroxyapatite (Ca₅(PO₄)₃OH) matrix in incremental tissues, such as tooth enamel, provides. Thus, analytical methods that can evaluate diagenetic changes are crucial in anthropological and archaeological investigations. Modern deciduous tooth enamel (exfoliated) from Solis, Mexico and Kalama, Egypt, as well as Bronze Age (circa 2200 B.C.E.) adult enamel from (present-day) Tell Abraq, U.A.E. and adult enamel from the New York African Burial Ground (NYABG) in lower Manhattan, were analyzed using diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS). The samples were compared to synthetic hydroxyapatite powder and bone ash samples. The DRIFTS spectra of tooth enamel yielded similar infra red finger print pattern to previous pellet-based FTIR spectra in both absorbance and Kubelka–Munk units. The study demonstrates that DRIFTS is a convenient alternative to pellet-based transmission FTIR in testing diagenetic changes in hard tissue for archaeological investigations. Tooth enamel samples contained a higher carbonate–phosphate ratio than synthetic hydroxyapatite and bone ash standard samples. Correlations are reported between Crystallinity Index (CI_Ab) and carbonate–phosphate ratio, strontium–calcium ratio, and fluoride peak appearance. Crystallinity indexes (CI_Ab) were in the range of 2.6–3.8 (in absorbance units) and Kubelka–Munk Crystallinity indexes (CI_KM) were in the range of 3.1–4.9.     

Structure, stability, and activity of myoglobin adsorbed onto phosphate-grafted zirconia nanoparticles

The adsorption of myoglobin (Mb) onto phosphate grafted-zirconia (ZrO2-P) nanoparticles was studied in terms of conformational studies and thermal stability, determined by circular dichroism (CD), differential scanning calorimetry (DSC), and atomic force microscopy (AFM). The changes in protein structure have been correlated with the catalytic activity of free and adsorbed Mb. CD and DSC studies indicate marked rearrangements in Mb structure upon adsorption onto phosphate-grafted zirconia nanoparticles. These structural rearrangements of Mb could be responsible for the loss of catalytic activity observed for the adsorbed Mb. In particular, the conformational changes due to the adsorption process induced a reduction of kcat and KM. AFM measurements indicate that the interaction with the grafted-zirconia nanoparticles also affects the morphology of the bound protein, inducing the nucleation of prefibrillar-like aggregates.     

Fibronectin conformation switch induced by coadsorption with human serum albumin

The dynamic adsorption of human serum albumin (HSA) and plasma fibronectin (Fn) onto hydrophobic poly(hydroxymethylsiloxane) (PHMS) and the structures of adsorbed protein layers from single and binary protein solutions were studied. Spectroscopic ellipsometry (SE) and quartz crystal microbalance with dissipation monitoring (QCM-D) together with atomic force microscopy (AFM) were used to measure the effective mass, thickness, viscoelastic properties, and morphology of the adsorbed protein films. Adsorbed HSA formed a rigid, tightly bound monolayer of deformed protein, and Fn adsorption yielded a thick, very viscoelastic layer that was firmly bound to the substrate. The mixed protein layers obtained from the coadsorption of binary equimolecular HSA-Fn solutions were found to be almost exclusively dominated by Fn molecules. Further sequential adsorption experiments showed little evidence of HSA adsorbed onto the predeposited Fn layer (denoted as Fn ? HSA), and Fn was not adsorbed onto predeposited HSA (HSA ? Fn). The conformational arrangement of the adsorbed Fn was analyzed in terms of the relative availability of two Fn domains. In particular, (4)F(1)·(5)F(1) binding domains in the Hep I fragment, close to the amino terminal of Fn, were targeted using a polyclonal antifibronectin antibody (anti-Fn), and the RGD sequence in the 10th segment, in the central region of the molecule, was tested by cell culture experiments. The results suggested that coadsorption with HSA induced the Fn switch from an open conformation, with the amino terminal subunit oriented toward the solution, to a close conformation, with the Fn central region oriented toward the solution.     

Humic acid fractionation upon sequential adsorption onto goethite

Mineral-humic complexes are commonly distributed in natural environments and are important in regulating the transport and retention of hydrophobic organic contaminants in soils and sediments. This study investigated the structural and conformational changes of humic acid (HA) and mineral-HA complexes after sequential HA adsorption by goethite, using UV-visible spectroscopy, high performance size exclusion chromatography (HPSEC), Fourier transform infrared (FT-IR) spectroscopy, and solid-state 13C nuclear magnetic resonance (NMR) spectroscopy. The HA remaining in the solution after adsorption showed low polarity index values ((N+O)/C), which indicates that polar functional moieties are likely to adsorb on the goethite surface. In addition, we observed decreased E4/E6 and E2/E3 ratios of unbound HA with increasing number of coatings, implying that aliphatic rich HA fractions with polar functional moieties readily adsorb to the goethite surface. According to IR spectra, carbohydrate carbon would be the important fractions associated with goethite. NMR spectra provided evidence for HA fractionation during adsorption onto the mineral surface; that is, aliphatic fractions were preferentially adsorbed by goethite while aromatic fractions were left in solution. Relatively small molecular weight (MW) HA fractions had a greater affinity for the goethite surface based on analyses of the HPSEC chromatograms, which differs from the results reported in the literature. Finally, our results suggest that the polar aliphatic fractions of HA were mainly adsorbed to goethite via electrostatic attraction and/or ligand exchange reactions.     

Protein Adsorption onto Nanosized Hydroxyapatite Particles for Controlled Drug Release

Nanosized hydroxyapatite(nsHAp) was synthesized to examine its possibility as a controlled release carrier of protein. To achieve effective protein release from nanosized hydroxyapatite, the study of the adsorptive properties of protein on nsHAp and different influence parameters such as pH, calcium, and phosphate concentrations during the adsorption process is necessary. Ovalbumin(OVA) was selected as the model of growth factors. The results show that the amount of OVA adsorbed onto nsHAp in acetic buffer(pH=3.6) is more than that in acetic buffer(pH=5.6) because of the electric interaction. The amount of OVA adsorption in phosphate buffer solution(PBS) is smaller than that in acetic buffer because of surface complexation and surface hydroxylation. The presence of Ca2 dramatically increases the adsorbed amount of OVA in acetic buffer on maintaining the same pH. Meanwhile, the release kinetics of OVA adsorbed onto nsHAp(nsHAp-OVA) was also examined. The amount of released OVA in PBS(pH=5.6) was significantly smaller than that released in solution of pH=7.0. All the results suggest that nanosized hydroxyapatite particles could be successfully used as controlled released carrier of protein.     

ATR-IR spectroscopic studies of the influence of phosphate buffer on adsorption of immunoglobulin G to TiO2

In situ attenuated total reflectance infrared (ATR-IR) spectroscopy has been applied to the study of the influence of phosphate on the extent of protein adsorption onto TiO₂. Immunoglobulin G (Ig.G) was adsorbed onto a TiO₂ sol–gel film from solutions containing phosphate or NaCl. Monitoring of the amide II absorbance (v=1545 cm⁻¹) confirmed reduced protein adsorption from the phosphate containing solution. In situ ATR-IR spectroscopy was also used to study phosphate induced desorption of Ig.G. Solutions containing various phosphate concentrations were passed over a TiO₂ film with Ig.G adsorbed to it. As the concentration of phosphate increased the amide II absorbance decreased confirming the removal of bound Ig.G from the TiO₂ surface. As the amide II absorbance decreased the phosphate absorbance (v=1080 cm⁻¹) increased suggesting accumulation of phosphate at the TiO₂ surface. Not all of the bound protein could be displaced from the TiO₂ surface by phosphate suggesting the presence of weakly and strongly bound Ig.G.     

MC3T3-E1 cell adhesion to hydroxyapatite with adsorbed bone sialoprotein, bone osteopontin, and bovine serum albumin

Native bone tissue is composed of a complex matrix of collagen, non-collagenous proteins, and hydroxyapatite (HAP). Bone sialoprotein (BSP) and bone osteopontin (OPN) are members of the non-collagenous protein family termed the SIBLING (small integrin-binding ligand, N-linked glycoproteins) proteins, which are primarily found in mineralized tissues. Previously, OPN was shown to exhibit a preferential orientation for MC3T3-E1 cell adhesion when it was specifically bound to collagen, while the MC3T3-E1 cell adhesion was shown to be dependant on the conformational flexibility of BSP specifically bound to collagen. Additionally, OPN was shown to play a greater role than BSP for cell binding to collagen. In this work, the orientations and conformations of BSP and OPN specifically bound to HAP are probed under similar conditions. Radiolabeled adsorption isotherms were obtained for BSP and OPN on HAP formed from a simulated body fluid, and the results show that HAP has the capacity to bind significantly more BSP than OPN. An in vitro MC3T3-E1 cell adhesion assay was then performed to compare the cell binding ability of adsorbed BSP and OPN specifically bound to HAP. It was found that there is a preference for cell binding to HAP with adsorbed BSP as compared to OPN, but not to a statistically significant level. However, the maximum cell binding was observed on HAP substrates with adsorbed heat denatured bovine serum albumin (BSA). The influence of BSA on cell binding was shown to be concentration dependant and it is believed that the adsorbed BSA modulates the proliferation state of the bound cells.     

Adsorption-induced fibronectin aggregation and fibrillogenesis

Fibronectin (Fn), a high molecular weight glycoprotein, is a central element of extracellular matrix architecture that is involved in several fundamental cell processes. In the context of bone biology, little is known about the influence of the mineral surface on fibronectin supramolecular assembly. We investigate fibronectin morphological properties induced by its adsorption onto a model mineral matrix of hydroxyapatite (HA). Fibronectin adsorption onto HA spontaneously induces its aggregation and fibrillation. In some cases, fibronectin fibrils are even found connected into a dense network that is close to the matrix synthesized by cultured cells. Fibronectin adsorption-induced self-assembly is a time-dependant process that is sensitive to bulk concentration. The N-terminal domain of the protein, known to be implicated in its self-association, does not significantly inhibit the protein self-assembly while increasing ionic strength in the bulk alters both aggregation and fibrillation. The addition of a non-ionic surfactant during adsorption tends to promote aggregation with respect to fibrillation. Ultimately, fibronectin fibrils appear to be partially structured like amyloid fibrils as shown by thioflavine T staining. Taken together, our results suggest that there might be more than one single organization route involved in fibronectin self-assembly onto hydroxyapatite. The underlying mechanisms are discussed with respect to Fn conformation, Fn/surface and Fn/Fn interactions, and a model of fibronectin fibrillogenesis onto hydroxyapatite is proposed.