Interaction of uranium(VI) with lipopolysaccharide

Bacteria have a great influence on the migration behaviour of heavy metals in the environment. Lipopolysaccharides form the main part of the outer membrane of Gram-negative bacteria. We investigated the interaction of the uranyl cation (UO2(2+)) with lipopolysaccharide (LPS) from Pseudomonas aeruginosa by using potentiometric titration and time-resolved laser-induced fluorescence spectroscopy (TRLFS) over a wide pH and concentration range. Generally, LPS consists of a high density of different functionalities for metal binding such as carboxyl, phosphoryl, amino and hydroxyl groups. The dissociation constants and corresponding site densities of these functional groups were determined using potentiometric titration. The combination of both methods, potentiometry and TRLFS, show that at an excess of LPS uranyl phosphoryl coordination dominates, whereas at a slight deficit on LPS compared to uranyl, carboxyl groups also become important for uranyl coordination. The stability constants of one uranyl carboxyl complex and three different uranyl phosphoryl complexes and the luminescence properties of the phosphoryl complexes are reported.     

Interaction of uranium(VI) with phthalic acid

Phthalic acid, a ubiquitous organic compound found in soil, water, and in domestic and nuclear wastes can affect the mobility and bioavailability of metals and radionuclides. We examined the complexation of uranium with phthalic acid by potentiometric titration, electrospray ionization-mass spectroscopy (ESI-MS), and extended X-ray absorption fine structure (EXAFS) analysis. Potentiometric titration of a 1:1 U/phthalic acid indicated uranyl ion bonding with both carboxylate groups of phthalic acid; above pH 5 the uranyl ion underwent hydrolysis with one hydroxyl group coordinated to the inner-sphere of uranium. In the presence of excess phthalic acid, ESI-MS analysis revealed the formation of both 1:1 and 1:2 U/phthalic acid complexes. EXAFS studies confirmed the mononuclear biligand 1:2 U/phthalic acid complex as the predominant form. These results show that phthalates can form soluble stable complexes with uranium and may affect its mobility.     

The kinetics of the oxidation-reduction reaction between uranium(VI) and titanium(III) in HCl solution

The oxidation-reduction reaction between U(VI) and Ti(III) in HCl solution was studied spectrophotometrically. The reaction is second-order at all concentrations of reactants, HCl, ferrous chloride and mannitol used in this work. In 5M HCl the rate constantk increases with increasing Ti(III) concentration, whereas it decreases with increasing U(VI) concentration, with increasing HCl concentration from 1.00M to 7.17M and increases thereafter from 7.17M to 11.79M. The addition of mannitol causes a consistent decrease in the rate of reaction, whereas ferrous chloride has no effect. The activation energy for this oxidation-reduction reaction was 47.90±0.11 kJ·mol^–1. The values of H , G and S were 45.40±0.11 kJ·mol^–1, 72.50±0.17 kJ·mol^–1 and –91.10±0.22J·k^–1·mol^–1, respectively. The mode of reaction is discussed in the light of kinetic results.     

Interaction of uranium(VI) with oxidants in alkaline media

It has been established that the violet-pink colour which arises during sodium peruranate oxidation in strongly alkaline solutions, and the black precipitate which is isolated during the ageing of these solutions, are not connected with the presence of uranium. Their formation is the result of a small amount of iron in the alkalies used; under the action of strong oxidants this is oxidized to Fe(VI), the compounds of which are intense violet-pink.     

Spectrophotometric measurement of uranium(VI)-tributylphosphate complex in supercritical carbon dioxide

UV-visible absorption spectra of uranium(VI)-tributylphosphate (U(VI)-TBP) complex dissolved in supercritical CO(2) at 40-60 degrees C and 100-250 kg cm(-2) were recorded. Wavelengths and molar extinction coefficients for the absorption peaks of U(VI)-TBP were determined and confirmed to be in good agreement with those of UO(2)(NO(3))(2)(TBP)(2) complex dissolved in organic solvents such as n-hexane. The absorbance at a given wavelength was proportional to the concentration of U(VI) species in supercritical CO(2), indicating a feasibility of in-situ determination of U(VI) concentration in CO(2) phase. A lower detection limit of U(VI)-TBP complex was estimated to be ca. 1x10(-3)M. The molar extinction coefficient of U(VI)-TBP in supercritical CO(2) decreased slightly with an increase of the density of CO(2) medium, suggesting that the solute-solvent interaction of U(VI)-TBP complex with CO(2) was affected by the density. On the basis of the spectra obtained, phase behavior and solubility of UO(2)(NO(3))(2)(TBP)(2)+H(NO(3))(TBP)+TBP in supercritical CO(2) were elucidated.     

Systematic evolution from uranyl(VI) phosphites to uranium(IV) phosphates

Six new uranium phosphites, phosphates, and mixed phosphate-phosphite compounds were hydrothermally synthesized, with an additional uranyl phosphite synthesized at room temperature. These compounds can contain U(VI) or U(IV), and two are mixed-valent U(VI)/U(IV) compounds. There appears to be a strong correlation between the starting pH and reaction duration and the products that form. In general, phosphites are more likely to form at shorter reaction times, while phosphates form at extended reaction times. Additionally, reduction of uranium from U(VI) to U(IV) happens much more readily at lower pH and can be slowed with an increase in the initial pH of the reaction mixture. Here we explore the in situ hydrothermal redox reactions of uranyl nitrate with phosphorous acid and alkali-metal carbonates. The resulting products reveal the evolution of compounds formed as these hydrothermal redox reactions proceed forward with time.     

Distribution of Pu(VI) from nitric acid to tri-n-butyl phosphate saturated with uranium(VI)

Solvent extraction of plutonium(VI) from nitric acid (1 to 5M) into 20% and 30% TBP in dodecane saturated with uranium(VI) (0% to 80%) has been studied. For a particular nitric acid concentration, the distribution coefficient (K _d ) is found to decrease with the increase in saturation of organic phase with uranium(VI). At a fixed organic phase the saturationK _d increased with increase in nitric acid concentration, however, the magnitude of this increase inK _d decreased with the increase in saturation.     

Interaction between photoexcited aqua-uranyl (VI) and perchlorate

In sufficient concentrations, perchlorate is found to produce a decrease in the decay and an exaltation of the luminescence of aqueous acidic solutions of uranyl. This is shown to be due to the excited-state interaction between excited uranyl and perchlorate, giving a complex in which the oxidative activity of the UO²⁺₂ moiety towards water is diminished.     

Ethanol photo-oxidation on a rutile TiO2(110) single crystal surface

The reaction of ethanol has been studied on the surface of rutile TiO(2)(110) by Temperature Programmed Desorption (TPD), online mass spectrometry under UV excitation and photoelectron spectroscopy while the adsorption energies of the molecular and dissociative modes of ethanol were computed using the DFT/GGA method. The most stable configuration is the dissociative adsorption in line with experimental results at room temperature. At 0.5 ML coverage the adsorption energy was found equal to 80 kJ mol(-1) for the dissociative mode (ethoxide, CH(3)CH(2)O(a) + H(a)) followed by the molecular mode (67 kJ mol(-1)). The orientation of the ethoxides along the [001] or [110] direction had minor effect on the adsorption energy although affected differently the Ti and O surface atomic positions. TPD after ethanol adsorption at 300 K indicated two main reactions: dehydration to ethylene and dehydrogenation to acetaldehyde. Pre-dosing the surface with ethanol at 300 K followed by exposure to UV resulted in the formation of acetaldehyde and hydrogen. The amount of acetaldehyde could be directly linked to the presence of gas phase O(2) in the vacuum chamber. The order of this photo-catalytic reaction with respect to O(2) was found to be 0.5. Part of acetaldehyde further reacted with O(2) under UV excitation to give surface acetate species. Because the rate of photo-oxidation of acetates (acetic acid) was slower than that of ethoxides (ethanol), the surface ended up by being covered with large amounts of acetates. A reaction mechanism for acetaldehyde, hydrogen and acetate formation under UV excitation is proposed.     

Interaction mechanisms between poly(amido‐amine) and nano‐silicon dioxide

To gain insight into the attachment of ?Si⁺ (SC) and ?SiO^? (SOA) ions (regarded as guests) to the lowest generation, ? NH₂‐terminated poly(amidoamine) (PAMAM) dendrimers (regarded as host) in the gas phase, density functional theory is used to investigate the structures and energetics of the complexes with B3LYP/6‐31+G (d) and HF/6‐31G basis sets. The initial parameters are obtained through the initial optimizations at the HF level using the most basic STO‐3G basis set. Various initial configurations of the ions bound to PAMAM are tested, and four stable conformers are found, i.e., types A to D. Types 1A and 2C are the most stable due to the chemical bond formations of Si? N° and Si? O, respectively. For type B, SC coordination to amide O sites occurs via electrostatic induction. For type D, SOA coordination to amide hydrogen and amine hydrogen sites occurs via hydrogen bond interaction. Spatial hindrance, electrostatic induction force, and hydrogen‐bond interaction play important roles in the complexation process. © 2013 Wiley Periodicals, Inc. This article was published online on 5 July 2012. An error was subsequently identified. This notice is included in the online and print version to indicate that both have been corrected on 3 August 2012.     

Enhanced photocatalytic reduction of Cr(VI) by manganese-doped anatase titanium dioxide

Nano-TiO₂ is frequently used as an optimal photocatalyst, since it is nontoxic, low cost, and environmentally friendly, especially for its photocatalytic oxidation action. However, its photocatalytic reducing action has not been widely researched. In this study, TiO₂ doped with different concentrations of manganese was prepared by the sol–gel method and characterized using different techniques to analyze the surface structure, phase composition, and surface elements of the different materials. To investigate the photocatalytic activity, Mn–TiO₂ was used for photocatalytic reduction of Cr(VI). Moreover, various organic pollutants were added to determine whether they enhanced the photocatalytic reduction of Cr(VI). The experiments indicated that the presence of Mn in TiO₂ could enhance its photocatalytic reduction action, especially at 0.02 % molar ratio. Manganese ions doped in TiO₂ behaved as electron accumulation sites. In addition, pH value, and photocatalyst dosage were investigated to analyze their effects on the photocatalytic reduction action. The results show that lower pH value improved the efficiency of photocatalytic reduction; there were no significant changes in the photocatalytic reduction rate with dosage above 1.0 g/L. In the presence of different electron donors (organic pollutants as hole scavengers), the photocatalytic reduction of Cr(VI) was generally improved. In short, manganese-doped TiO₂ exhibited improved photocatalytic reduction activity, especially in cooperation with various organics.     

Feasibility study of aqueous adsorption of Cr(VI) on titanium dioxide

Sorption of chromium radionuclide has been studied in the pH range of 1–10 on titanium dioxide from aqueous solutions. The adsorption isotherm obtained is of the Freundlich type. The kinetic study of adsorption and desorption of tagged chromate ions at different temperatures show that the adsorption process is exothermic innnature. Further, the feasibility of adsorption process is confirmed by calculating the thermodynamic parameters.     

Extraction of uranium(IV) and uranium(VI) by primary and tertiary-amines from sulphate solutions

In developing a method for possible low level isotopic enrichment, which uses to advantage the equilibrium isotope effect observed during U(1V)-U(VI) electron exchange reaction in sulphate solutions, details of a solvent extraction process involving high concentration of a mixture of U(IV) and U(VI) and at low acid concentrations, are described. The extraction behaviour of uranium under these conditions is discussed. During the extraction with amines, U(IV) tended to get oxidised in sulphate solutions.     

Interaction mechanisms of U(VI) and graphene oxide from the perspective of particle size distribution

Graphene oxide (GO) is an ideal adsorbent due to excellent physicochemical properties. Humic acid (HA) is ubiquitous in aquatic and soil environment, which can affect the migration of metal ions. In this study, we investigated the sorption mechanisms of U(VI) onto GO surfaces in the presence of HA. pH dependent and ionic strength independent sorption process were observed and the concentration of HA is positively proportional to U(VI) sorption capacities. Results also suggest that a pre-mixing HA + U(VI) gave better results than a pre-mixing of GO + HA, which can be explained by the size distribution of different GO systems.

     

Liquid-liquid extraction of molybdenum(VI) and uranium(VI) by LIX 622

The order of extraction of Mo(VI) from 1M acid solutions by 5% (v/v) LIX 622 (HL) in benzene is HCl>HNO₃>HClO₄>H₂SO₄, and extraction decreases with increasing concentration of HCl and H₂SO₄, and increases slightly with increasing concentration of HNO₃ and HClO₄. The extracted species is shown to be MoO₂L₂ as established by IR data of organic extracts and the extracted species in the solid form. Extraction is almost quantitative at and above 10% LIX 622, and is found to be independent of [Mo(VI)] in the range of 10^–4 to 10^–3 M. The diluents CCl₄, CHCl₃ and C₆H₆ are found to be superior to solvents of high dielectric constant for extraction of Mo(VI). Extraction of uranium(VI) by 10% (v/v) LIX 622 in benzene was found to increase with increasing equilibrium pH (3.0 to 6.0), and becomes quantitative at pH 5.9. Tributyl phosphate acts as a modifier up to 2% (v/v). Thorium(IV) is almost not extracted by LIX 622 or its mixture. Separation of Mo(VI) and U(VI) is feasible.     

Spectrophotometric determination of tungsten(VI) enriched by nanometer-size titanium dioxide in water and sediment

The adsorption of W (VI) on different metal oxides (TiO₂, ZrO₂), different crystal form of TiO₂ (rutile, anatase) with high surface areas was studied and compared under different pH. A novel method for preconcentration of W (VI) with nanometer size titanium dioxide (rutile) and determination by spectrophotometry has been developed. W (VI) was selective adsorbed on 100 mg TiO₂ from 250 ml solution at pH 3.0, then eluted by 2 ml 9 mol l⁻¹ sodium hydroxide solution. The eluent was adjusted to 5 ml pH 0 solution, added 0.5 ml 12 mol l⁻¹ HCl, 0.3 ml 3% TiCl₃, 0.3 ml 50% NH₄SCN, stirred for 20 min, used for the analysis of W (VI) by measuring the absorbance at 402 nm with spectrophotometry, based on the chromogenic reaction between the W (VI) and the mixture of TiCl₃ and NH₄SCN. This method gave a concentration enhancement of 50 for 250 ml sample, eliminated the sizable interferences on direct determination with spectrophotometry. Detection limits (3σ, n=11) of 1.2 ng ml⁻¹, relative standard deviation of 2.3% at 10 ng ml⁻¹ level were obtained. The method was applied to determine the W (VI) in hot spring water, river water, tap water and stream sediment. Analytical recoveries of W (VI) added to samples were 98–101%.     

Adsorption of uranium (VI) from aqueous solution by tetraphenylimidodiphosphinate

The adsorption of uranium (VI) using tetraphenylimidodiphosphinate (Htpip) was studied. Factors of affecting sorption efficiency have been investigated and results showed the adsorption of uranium (VI) was equilibrium at pH 4.5, time 20 min, adsorbent dosage 0.005 g and initial concentration 50 mg L^?1 reaching 99.86 mg g^?1 of adsorption capacity and 99.86% of removal efficiency. Additionally, the interfering ions studies showed that the adsorbent possessed excellent adsorption selectivity of uranium (VI). The surface morphology of Htpip was investigated by SEM. The adsorption process of uranium (VI) onto Htpip fit the pseudo-second-order kinetic model and the Freundlich isotherm model very well.     

四丁基脲从硝酸介质中萃取铀(VI)行为的研究

与常用的铀萃取剂磷酸三丁酯(TBP)相比较,酰胺的理化性质类似于TBP,其主要优点是：降解产物一般不影响裂片元素的去污,产物无固体生成,属于“可完全燃烧”萃取剂,可大大减少放射性废物量。本文用非光气法合成了N,N,N’,N’-正四丁基脲(以下简称TBU),并以无毒性的石油醚作稀释剂,其对铀的萃取规律类似于TBP,萃取能力略低于TBP,在各实验条件下均不出现三相,铀的溶剂化数为2。