Retention model for the separation of anionic metal-EDTA complexes in ion chromatography

A retention model is derived for complex anions eluted from an anion-exchange column with multiple ionic eluents containing hydrogencarbonate, carbonate, and hydroxyl species and the sample solution, containing transition metals, anions and complexing ligand. The theory is based on the generalized ion-exchange equilibrium, protonation and complex-formation equilibria. The unknown parameters of chromatographic ion-exchange equilibrium constants for sample and eluent species are determined from the experimental retention data by iterative minimization, using a non-linear regression algorithm. The model was utilized to predict the retention behaviour of CdEDTA²⁻, CoEDTA²⁻, MnEDTA²⁻ and NiEDTA²⁻ ions. The capacity factors of complex ions were determined for wide ranges of pH values and eluent concentrations. Good agreement was obtained between the observed and predicted retentions.     

Ion chromatographic separation of car☐ylic acids prediction of retention data

The retention behavior of biologically relevant monovalent (formic, acetic, propionic, lactic and pyruvic) and divalent (oxalic, malonic, succinic, fumaric, maleic and tartaric acids) car☐ylic acids together with inorganic analytes (chloride and sulphate) has been studied. The separation was performed on a latex-based strong anion-exchange resin using carbonate buffer systems in suppressed IC. The retention behaviour of analytes was investigated at different pH values and [HCO₃⁻]+[CO₃²⁻] concentrations. A theoretical model, involving ion-exchange equilibria of sample and eluent anions, was derived and applied to the chromatographic data obtained. Chromatographic ion exchange selectivity values were determined and retention data were calculated for the anions using different carbonate eluent conditions. The average of errors between the predicted and the measured retention volumes of the analytes studied does not exceed 4.0%. The study effectively characteristics the behaviour of different analytes under elution conditions of practical importance.     

Ion-exchange properties of hypercrosslinked polystyrene impregnated with methyl orange

A novel bipolar stationary phase (HCPS–MO) was prepared by impregnation of hypercrosslinked polystyrene (HCPS) with methyl orange (MO; 4-dimethylamino-4′-sulfoazobenzene) and its ion-exchange properties were studied. Simultaneous separation of cations and anions on HCPS–MO is possible, although it behaves preferentially as a cation-exchanger. Unusual selectivity of HCPS-MO for alkali and alkaline-earth metal cations: Na⁺+K⁺+4⁺+ and Mg²⁺2+2+2+ was observed. The effect of temperature on retention of alkali and alkaline-earth metal cations was studied. Separation of Na⁺, K⁺, Rb⁺, NH₄⁺, Cs⁺, Mg²⁺ and Ca²⁺ on HCPS–MO with diluted cerium(III) nitrate solution as an eluent in single run is presented.     

Retention behavior of transition metals on a bifunctional ion-exchange column with oxalic acid as eluent

The common eluents used with a bifunctional ion-exchange column (IonPac CS5A) for separating transition metals are pyridine-2,6-dicarboxylic acid and oxalic acid (Ox). When Ox is used, cadmium and manganese co-elute. Although much research has been done to overcome the Cd²⁺–Mn²⁺ co-elution problem, the role of lithium hydroxide in separating the transition metals has received little attention. In this study, it is found that when the Ox concentration is higher than 35 mM, Cu²⁺ elutes after Pb²⁺ and Ox plays a predominant role in the retention behavior of the seven metals. When Ox concentration is lower than 35 mM especially when its concentration (25 mM) is half of the usually used standard concentration (50 mM), Cu²⁺ elutes before Pb²⁺, and at the same time, Mn²⁺and Cd²⁺ can also be baseline separated. Lithium hydroxide plays a predominant role in the separation of the metals separated by cation exchange. So, lithium hydroxide is used to adjust the pH of the eluent. The use of an isocratic elution (25 mM Ox/LiOH/2 mM Na₂SO₄, pH 3.88) allows the separation of seven metals (Cu²⁺, Pb²⁺, Co²⁺, Mn²⁺, Cd²⁺, Zn²⁺ and Ni²⁺) in a single run. The effects of inorganic modifiers such as NaNO₃, Na₂SO₄ and Na₄P₂O₇ on retention behavior of the metals are also investigated.     

Effect of eluent composition on retention behavior of anions in ion chromatography on anion-exchangers modified with heparin

Effects of eluent composition on retention behavior of inorganic anions have been investigated in ion chromatography using anion-exchangers modified with heparin. Both cation and anion of the eluent affected the retention of analyte anions and unusual retention behavior was observed on the modified stationary phase. The retention time of anions decreased with decreasing eluent concentration when sodium sulfate, magnesium sulfate and chlorides of alkali metals were used as the eluent, whereas it increased with decreasing eluent concentration when aluminum sulfate, copper sulfate and sulfuric acid were used as the eluent. The retention of nitrate increased in the order of Li⁺, Na⁺, K⁺, Rb⁺ and Cs⁺ when their chlorides were used as the eluent. When sodium perchlorate and chlorides of alkaline-earth metals were used as the eluent, the eluent should include heparin. Otherwise, the modifier was partially bled from the column.     

离子色谱-直接电导检测法分析哌啶离子液体阳离子

建立了离子色谱-直接电导检测法分析N-甲基,乙基哌啶(［MEPi］+)、N-甲基,丙基哌啶(［MPPi］+)和N-甲基,丁基哌啶(［MBPi］+) 3种哌啶离子液体阳离子的方法。采用磺酸型阳离子交换色谱柱,以乙二胺-柠檬酸-乙腈为流动相。考察了流动相组成及色谱柱温度对哌啶阳离子保留的影响,并讨论了保留规律。结果表明,哌啶阳离子的保留是一个放热过程,即哌啶阳离子的保留时间随着色谱柱温度的升高而缩短,且哌啶阳离子同系物的保留符合碳数规律。在以0.2 mmol/L乙二胺-0.3 mmol/L柠檬酸-3%(v/v)乙腈(pH 4.4)为流动相、流速1.0 mL/min、柱温30 ℃条件下,［MEPi］+、［MPPi］+和［MBPi］+3种哌啶阳离子可以在7 min内分离,检出限(信噪比为3)分别为0.14、0.20和0.56 mg/L,峰面积的相对标准偏差(n=5)在1.2%以下。将此方法应用于分析实验室合成的哌啶离子液体样品,加标回收率在97.6%与105.1%之间。本方法准确、可靠、快速,具有较好的实用性。     

Determination of 2,4,6-trichloroanisole in wines by headspace solid-phase microextraction and gas chromatography-electron-capture detection

The retention behaviour of alkaline earth cations was studied as a function of changing composition of acidified ethylenediamine eluent. The multiple eluent species retention model developed for separation of calcium, magnesium and strontium ions was utilized for determination of selectivity coefficients for sample and eluent ions. The suggested model accurately describes and predicts retention of analytes under elution conditions [0.5-2.0 mM C2H4(NH2)2 and pH 4-6] which are of practical importance. The results in three-dimensional retention surface with species distribution graphs are demonstrated. Complexometric titrations and ion chromatography (IC) were compared for the analysis of calcium and magnesium ions. Statistical data indicated that there was no evidence for relative differences between the two methods. However, IC gives several advantages over volumetric method.     

Hydrophilic interaction liquid chromatography with indirect ultraviolet detection for the separation and quantification of pyrrolidinium ionic liquid cations

A method of hydrophilic interaction liquid chromatography with indirect ultraviolet detection was developed to determine three pyrrolidinium ionic liquid cations, i.e. N-methyl-N-ethyl pyrrolidinium cation ([MEPy]⁺), N-methyl-N-propyl pyrrolidinium cation ([MPPy]⁺) and N-methyl-N-butyl pyrrolidinium cation ([MBPy]⁺). Chromatographic separation was achieved on a hydrophilic column using imidazolium ionic liquids and organic solvents as the mobile phase. The effects of the background ultraviolet absorption reagents, the imidazolium ionic liquids, detection wavelength, organic solvents, column temperature and the pH value of the mobile phase on the separation and determination of pyrrolidinium cations were investigated and the retention behaviors in hydrophilic interaction chromatography were discussed. The optimized chromatographic conditions were selected. Under the optimal conditions, the detection limits (S/N = 3) for [MEPy]⁺, [MPPy]⁺ and [MBPy]⁺ were 0.59, 0.53 and 0.46 mg/L, respectively. The method has been successfully applied to the determination of the three ionic liquids synthesized in our chemistry laboratory. This research results may improve the analytical method of ionic liquid cations.     

Retention profiles and mechanism of anion separation on latex-based pellicular ion exchanger in ion chromatography

A retention model based on stoichiometric approach has been developed in order to describe analyte retention of anions on latex-based pellicular ion exchanger. The chromatographic process entails two stepwise and complex equilibria, first is ion-pair forming of analyte or eluent ion with ion-exchange sites under the effect of electrostatic forces due to the sulfonic layer behind the aminated functional groups of stationary phase. Second component is the ion-exchange between the analyte and eluent ions. As a new parameter of the fractional electrostatic coefficient of the ion exchange capacity was introduced to develop retention profiles of anions. Analysis of the dependence of the capacity factors on the eluent concentrations at different values of fractional coefficient shed light on the possible complex mechanism. Extensive experimental retention data were obtained for 14 anions (formate, acetate, propionate, pyruvate, lactate, chloride, nitrate, oxalate, malonate, succinate, tartarate, fumarate, maleate, sulphate) using hydroxide eluents of varying concentration. The ion-pair formation and ion-exchange selectivity constants for analyte and eluent species are determined using derived retention equation from experimental data by nonlinear iterative calculation. The model was utilized to predict retention data under elution conditions of practical importance. The predicted and obtained retention factors are in good agreement, which confirms the predictive power of the model.     

Simultaneous separation of common mono- and divalent cations on silica gel modified with aluminium by non-suppressed ion chromatography with conductimetric detection and nitric acid–15-crown-5 as eluent

The modification of silica gel with aluminium by a coating method was very effective for the preparation of silica-based stationary phases which acted as a cation exchanger under strongly acidic conditions. However, the separation of common mono- and divalent cations (Li⁺, Na⁺, NH₄⁺, K⁺, Mg²⁺ and Ca²⁺) on an aluminium-adsorbing silica (Al-Silica) column was moderate by a conductimetric detection ion chromatography (IC) with strongly acidic eluents. Then, the addition of various crown ethers (12-crown-4, 15-crown-5 and 18-crown-6) in acidic eluent was carried out. As a result, it was found that 15-crown-5 was most effective for the improvement of peak resolution. Excellent separation of these cations was achieved in 20 min by elution with 2 mM nitric acid–2 mM 15-crown-5. The proposed IC was successfully applied to the determination of major cations in various natural waters.     

CuNaY分子筛的制备及其催化甲醇氧化羰基化

采用多种铜盐溶液与NaY分子筛离子交换制备了CuNaY催化剂,通过加入氨水提高溶液pH值以及高温活化,显著提高了该催化剂对甲醇氧化羰基化合成碳酸二甲酯的反应活性。不同的铜盐水溶液交换制备的CuNaY催化剂催化活性不同,添加氨水将溶液pH值调节为11后,离子交换制备的CuNaY催化剂的催化活性和DMC选择性明显升高且趋于一致。经元素分析、XRD、XPS和H₂-TPR表征可知,加入氨水可促进Cu²⁺离子交换的进行,提高CuNaY催化剂中Cu的交换量,催化剂中约75%的Cu²⁺定位于分子筛的超笼中。     

Maleic acid-styrene encapsulated silica cation exchanger in high performance liquid chromatography

The use of poly(maleic acid–styrene)-encapsulated silica for the determination of monovalent and divalent cations is well accepted in ion chromatography. The separation of Mn²⁺, alkali and alkaline earth metal cations is obtained under the same chromatographic conditions. The influences of pH and the concentration of eluent on the retention of cations have been studied. The preparation conditions of packings were studied. The metal ions in the boiler water samples from a thermal power plant were quantitatively determined using this column. The results are in agreement with those determined by ICP and Volumetric analysis methods.     

REGENERATION OF BLUE AND PURPLE MEMBRANES FROM DEIONIZED BLEACHED MEMBRANES OF Halobacterium halobium

Abstract— Bleached purple membrane normally binds Ca²⁺ and Mg²⁺, which can be removed by the divalent cation chelator ethylenediaminetetraacetic acid (EDTA). Regeneration of pigments from EDTA-treated bleached membrane (apomembrane) and retinal leads to the formation of blue membrane at pH 4.8, and purple membrane at neutral pH. The pigments take much longer to regenerate than with un-deionized apoprotein. Adding back cations to the deionized apomembrane only partially speeds up the regeneration process. Like native purple membrane, the regenerated purple membrane also undergoes a photocycle and shows a light-induced proton release and uptake, although with much slower kinetics than the native species. Thus, cations control the kinetics of pigment regeneration, and also some aspects of the pigment's conformation which controls the photocycle kinetics. The removal and replacement of the cations is not completely reversible, suggesting the cations are not merely bound in the double layer.     

Use of Microspherical Sulfonated Hypercrosslinked Polystyrene in Ion Chromatography

The possibility of applying sulfonated cation exchangers on the basis of hypercrosslinked polystyrene (HCPS) of different ion-exchange capacity for the ion-chromatographic separation of alkali metal and ammonium cations was demonstrated. The effect of the nature and concentration of the eluent, the temperature of the chromatographic column, additions of an organic solvent to the eluent, and the ion-exchange capacity of the sorbent on the retention of cations was examined. An unusual selectivity of the sorbent for lithium and ammonium cations was found; the elution order can change for the Li⁺/Na⁺ and Rb⁺/NH⁺ ₄ pairs depending on the nature of the eluent, the temperature, additions of an organic solvent, and the structural characteristics of the sorbent. When dilute solutions of nitric acid are used as the eluent, the following elution order of cations was obtained: Na⁺ < Li⁺ < K⁺ < NH⁺ ₄ < Rb⁺ < Cs⁺ Mg²⁺ < Sr²⁺ < Ca²⁺ < Ba²⁺. Under the optimum conditions of separation (1 mM solution of sulfuric acid, 20°C) on sulfonated HCPS with an ion-exchange capacity of 0.07 mequiv/g, the separation of ammonium and alkali metal cations was achieved within 17 min.     

Critical comparison of retention models for the optimisation of the separation of anions in ion chromatography: II. Suppressed anion chromatography using carbonate eluents

Seven theoretical retention models, namely the linear solvent strength model (using the dominant equilibrium approach and competing ion effective charge approach), the dual eluent species model, the Kuwamoto model, the extended dual eluent species model, the multiple species eluent/analyte model and the empirical end-points model, were used to describe the retention behaviour of anions in suppressed ion chromatography (IC). An extensive set of experimental retention data was gathered for 24 anions (fluoride, formate, bromate, chloride, hexanesulfonate, bromide, chlorate, nitrate, iodide, thiocyanate, perchlorate, sulfite, succinate, sulfate, tartrate, selenate, oxalate, tungstate, phthalate, molybdate, chromate, thiosulfate and phosphate) on a Dionex AS4A-SC column using carbonate eluents of varying concentration and HCO₃⁻:CO₃²⁻ ratios. Statistical comparison of the predicted and experimentally obtained retention factors showed that the performance of the theoretical models improved with the complexity of the model. However the empirical model (in which a linear relationship is assumed between the logarithm of retention factor and the logarithm of eluent strength, but the slope is determined empirically) gave the most consistent performance across the widest range of anions. The empirical end-points model was also shown to be the most satisfactory model due to its low knowledge requirements and easy solution. Compared with non-suppressed IC (see Part I), the retention behaviour in suppressed IC was found to be easier to model by all retention models.     

Ab initio study of trimethyloxonium and disilylmethyloxonium cations as intermediates in reactions of CH3 cations with ethers and disiloxanes

The study of the gas-phase reactions ofCH₃⁺ cations generated from tert-butyl ether and hexamethyldisiloxane by the nuclear chemical method shows that these cations are produced via oxonium cations as intermediates. Trimethyloxonium and disilylmethyloxonium cations were taken as model structures for these intermediates, and their ab initio equilibrium geometries were refined at the HF/4-21 (O^*)G level of theory. The relative yields of the products of these reactions under competitive conditions found experimentally are in keeping with the theoretical relative stability of the (CH₃)₃O⁺ and (SiH₃)₂CH₃O⁺ cations. The geometry of the latter was also used for the discussion of the surface structures that arise when methanol chemisorbs onto silica. Some previously unassigned bands in the IR spectra of these surface species, the frequencies of which coincide with calculated CH stretching frequencies of the disilylmethyloxonium cation, were attributed to surface oxonium methoxy groups.     

Tripodal lipophilic ionophores: synthesis, cation binding and transport through liquid membranes

New C₃-symmetric lipophilic tripodal ionophores, Et(CH₂OCH₂COR)₃; R=NMePh (1), R=NEtPh (2), R=piperidyl (3), have been prepared and their binding abilities for alkali and alkaline earth metal cations evaluated by extraction equilibrium and cation transport through bulk liquid membranes. Experiments show that these ionophores have considerable potential for transporting lithium, sodium and calcium ions relative to potassium and magnesium ions. The cation transport rates by ionophores 1 and 2 decrease in the order Li⁺>Na⁺>Ca²⁺>Ba²⁺>K⁺>Mg²⁺, and the selectivities of Li⁺/K⁺, Na⁺/K⁺ and Ca²⁺/Mg²⁺ are 6.47–7.24, 6.05–6.19 and 9.39–16.13, respectively. The extraction selectivity sequences of the ionophores 1 and 2 are in agreement with the descending order of the cation transport rate, and the complexation constants in chloroform phase were estimated.     

Interaction and aggregation of lipid vesicles (DLVO theory versus modified DLVO theory)

Interaction and aggregation of acidic phospholipid (phosphatidylserine) vesicles were studied with variation of cation species and their concentrations in vesicle suspensions, and of vesicle sizes. Aggregation was determined by measuring turbidity of vesicle suspension. The experimental results of aggregation of vesicles induced by monovalent cations (Na⁺, K⁺, Cs⁺ and TMA⁺) were explained well in terms of the interaction energy of two interacting vesicles using the ordinary Derjaguin–Landau–Verwey–Overbeek (DLVO) theory for both small and large lipid vesicles. However, the experimental results of aggregation of vesicles induced by divalent cations (Ca²⁺, Mg²⁺ and Ba²⁺) were not explained by the ordinary DLVO theory. In order to explain the experimental results of these vesicle aggregation phenomena, it was necessary to modify the theory by including hydration interaction energies which are due to hydrated water at membrane surfaces, and their magnitude and sign depend upon the nature (hydrophobicity) of the membrane surface.     

Effect of Magnesium and Calcium Complexation on the Photochemical Properties of Norfloxacin

Abstract— The fluoroquinolone antibiotics can induce skin photosensitivity in some patients and this has been ascribed to the generation of reactive oxygen species, such as singlet oxygen (O₂[¹Δ_g]). We have studied the photochemical properties of the different ionized forms of the fluoroquinolone norfloxacin upon complexation with Mg²+ and Ca²+ ions, as it is proposed that the antibiotic exists mainly as a complex in the blood plasma. We found that the norfloxacin cation (pH < 6) shows no photodegradation after UVA irradiation and has a low quantum yield of O₂(¹Δ_g) generation. The norfloxacin cation does not complex. Ca²+ or Mg²+ ions; when these ions are added to the solution, we observed no changes in the fluorescence quantum yields (φ_flu) and singlet oxygen yields (φ_Δ). In contrast, the neutral (6 ± pH > 8.5) and anionic (pH > 9) forms of norfloxacin are able to complex calcium and magnesium, and their generation of O₂ (¹Δ_g) is decreased by complexation. The neutral zwitterionic form and the anionic form also quench singlet oxygen by both chemical and physical pathways regardless of complex formation, while physical quenching is observed for the cation. At pH > 7.4, norfloxacin photobleaches and complexation to Ca²+ and Mg²+ increases the rate at which photobleaching occurs. Thus, both the pH of the medium and complexation with metal cations may affect the phototoxic potential of this antibiotic.     

Ion-chromatographic behavior of alkali metal cations and ammonium ion on zirconium-adsorbing silica gel

The preparation and evaluation of zirconium-adsorbing silica gel (Zr-Silica) as an ion-exchange stationary phase in ion chromatography for inorganic anions and cations was carried out. The Zr-Silica was prepared by the reaction of silanol groups on the surface of the silica gel with zirconium butoxide (Zr(OCH2CH2CH2CH3)4) in ethanol. The ion-exchange characteristics of the Zr-Silica were evaluated using 10 mM tartaric acid at pH 2.5 as eluent. The Zr-Silica was found to act as a cation-exchanger under the eluent conditions. The retention behavior of alkali and alkaline earth metal cations was then investigated. The Zr-Silica column was proved to be suitable for the simultaneous separation of alkali metal cations and ammonium ion. Excellent separation of the cations on a 15 cm Zr-Silica column was achieved in 25 min using 10 mM tartaric acid as eluent.