Electronic properties of chalcopyrite CuAlX2(X=S,Se,Te) compounds

We present results of the band structure and density of states for the chalcopyrite compounds CuAlX₂ (X=S,Se,Te) using the state-of-the-art full potential linear augmented plane wave (FP-LAPW) method. Our calculations show that these compounds are direct band gap semiconductors. The energy gap decreases when S is replaced by Se and Se replaced by Te in agreement with the experimental data. The values of our calculated energy gaps are closer to the experimental data than the previous calculations. The electronic structure of the upper valence band is dominated by the Cu-d and X-p interactions. The existence of Cu-d states in the upper valence band has significant effect on the optical band gap.     

Structural,electronic, and optical properties of bulk Cu2Se

By using first-principles calculations within the density functional theory and the many-body perturbation theory, we investigate the structural, electronic, and optical properties of bulk Cu₂Se with a recently discovered low-temperature layered configuration. We demonstrate that the effects of the van der Waals forces significantly modify the interlayer binding and distance in the layered Cu₂Se, while the band gap is invariant. Our density functional theory and post-processing GW calculations reveal that for the layered structure, GW correction remedies the serious band-gap underestimation of the density functional theory from 0.12 eV to 0.99 eV. By solving the Bethe–Salpeter equation, we find that the optical gap of the layered Cu₂Se is 0.86 eV, which is in close agreement with previous experimental observations. In addition, we show that the high-temperature fluorite structure has no band gap, even after GW correction, explaining that the band gap controversy among the theories stems from different structural models. This work may serve as an important guide in designing and evaluating photovoltaic devices using Cu₂Se-based materials.     

Electronic structure and structural phase stability of CuAlX2 (X=S, Se, Te) under pressure

The electronic and structural properties of chalcopyrite compounds CuAlX₂ (X=S, Se, Te) have been studied using the first principle self-consistent Tight Binding Linear Muffin-Tin Orbital (TBLMTO) method within the local density approximation. The present study deals with the ground state properties, structural phase transition, equations of state and pressure dependence of band gap of CuAlX₂ (S, Se, Te) compounds.Electronic structure and hence total energies of these compounds have been computed as a function of reduced volume. The calculated lattice parameters are in good agreement with the available experimental results. At high pressures, structural phase transition from bct structure (chalcopyrite) to cubic structure (rock salt) is observed. The pressure induced structural phase transitions for CuAlS₂, CuAlSe₂, and CuAlTe₂ are observed at 18.01, 14.4 and 8.29 GPa, respectively. Band structures at normal as well as for high-pressure phases have been calculated. The energy band gaps for the above compounds have been calculated as a function of pressure, which indicates the metallic character of these compounds at high-pressure fcc phase. There is a large downshift in band gaps due to hybridatization of the noble-metal d levels with p levels of the other atoms.     

Many-body effects on the width of the band gap in Bi2Te2X (X = Te, Se, S) topological insulators

The spectrum of quasiparticles of Bi₂Te₂X (X = Te, Se, S) three-dimensional topological insulators has been theoretically studied in the GW approximation with the inclusion of the spin-orbit interaction in the construction of the Green’s function and self-energy. It has been shown that many-body corrections to the Kohn-Sham states in Bi₂Te₂X increase the fundamental band gap similar to conventional semiconductors. However, the band gap at the Γ point decreases in this case. Gaps in the quasiparticle spectrum obtained in agreement with the experimental data correspond to the difference between the minimum of the conduction band, which is located on the Γ-Z line, and the maximum of the valence band, which lies beyond the symmetric directions in the mirror plane.     

LiGaX2(X=S,Se, Te)的电子结构,光学和弹性性质的第一性原理计算

采用基于第一性原理的密度泛函理论赝势平面波方法,对LiGaX₂(X=S, Se, Te)的能带结构、态密度、光学以及弹性性质进行了理论计算. 能带结构计算表明LiGaS₂ 的禁带宽度为4.146 eV, LiGaSe₂ 的禁带宽度为3.301 eV, LiGaTe₂ 的禁带宽度为2.306 eV; 其价带主要由Ga-4p 层电子和X- np 层电子的能态密度决定; 同时也对LiGaX< 关键词： 电子结构 光学性质 弹性性质 LGX     

Bonds,bands, and band gaps in tetrahedrally bonded ternary compounds: The role of group V lone pairs

An interesting class of tetrahedrally coordinated ternary compounds has attracted considerable interest because of their potential as good thermoelectrics. These compounds, denoted as I₃–V–VI₄, contain three monovalent-I (Cu, Ag), one nominally pentavalent-V (P, As, Sb, Bi), and four hexavalent-VI (S, Se, Te) atoms; and can be visualized as ternary derivatives of the II–VI zincblende or wurtzite semiconductors, obtained by starting from four unit cells of (II–VI) and replacing four type II atoms by three type I and one type V atoms. We find that nominally pentavalent-V atoms are effectively trivalent and their lone (ns²) pairs play an active role in opening up a gap. The lowest conduction band is a strongly hybridized anti-bonding combination of the lone pair and chalcogen (VI) p-states. The magnitude of the gap is sensitive to the nature of the exchange interaction (local vs non-local) and the V–VI distance. We also find that the electronic structure near the gap can be reproduced extremely well within a local theory if one can manipulate the position of the filled d bands of Cu and Ag by an effectively large U.     

A model of enhanced STM current due to semiconductor optical absorption

We present a simple model for the change in tunneling current between a semiconductor surface and a metal tip under spectroscopic illumination in a scanning tunneling microscope. This model predicts a sharp increase in the tunneling current due to the increase in the conduction band carrier density when the photon energy exceeds the optical band gap. The tunneling current for a large diffusion length has a more pronounced onset than for a small length. Our model should provide, when combined with experiments, a method of determining localized effective stoichiometry, and therefore provides a localized alternative to the use of optical absorption measurements. Our theoretical tunneling current versus photon energy curves are in good qualitative agreement with the existing experimentally measured curves for Si, GaAs, and InP obtained by Qian and Wessels. In addition, we have examined the effects of temperature, surface recombination velocity, and degeneracy on our theoretical results for the Hg_1−xCd_xTe, Hg_1−xZn_xTe, and Hg_1−xZn_xSe ternary narrow gap semiconductor systems.     

Ab initio band structure calculations of the low-temperature phases of Ag2Se, Ag2Te and Ag3AuSe2

Ab initio band structure calculations were performed for the low-temperature modifications of the silver chalcogenides β-Ag₂Se, β-Ag₂Te and the ternary compound β-Ag₃AuSe₂ by the local spherical wave (LSW) method. Coordinates of the atoms of β-Ag₂Se and β-Ag₃AuSe₂ were obtained from refinements using X-ray powder data. The structures are characterized by three, four and five coordinations of silver by the chalcogen, a linear coordination of gold by Se, and by metal-metal distances only slightly larger than in the metals. The band structure calculations show that β-Ag₃AuSe₂ is a semiconductor, while β-Ag₂Se and β-Ag₂Te are semimetals with an overlap of about 0.1-0.2 eV. The Ag 4d and Au 5d states are strongly hybridized with the chalcogen p states all over the valence bands. β-Ag₂Se and β-Ag₂Te have a very low DOS in the energy range from about −0.1 to +0.5 eV. The calculated effective mass β-Ag₂Se is about 0.1-0.3 m_e for electrons and 0.75 m_e for holes, respectively.     

First principles study of half-metallic ferromagnetism in Cr-doped CdTe

We report a systematic study of the structural, electronic and magnetic properties of Cr-doped CdTe for various Cr concentrations x (=0.25, 0.5, 0.75 and 1.0) using first principles calculations based on the density functional theory (DFT). The electronic band structure of the alloy has been calculated using the Wu-Cohen (WC) as well as the Angel-Vosko (EV) generalized gradient approximation (GGA) for the exchange-correlation potential. The analysis of the density of states (DOS) curves shows the half-metallic ferromagnetic character with half-metallic gap more than 0.52 eV. While the origin of half-metallic ferromagnetism is explained, the band structure calculations are used to determine s (p)-d exchange constants N₀α (conduction band) and N₀β (valence band) that agree with typical magneto-optical experiment. It is found that the p-d hybridization reduces the magnetic moment of Cr from its free space charge value and produces small magnetic moments on the Cd and Te sites. Lastly, we discuss the robustness of half-metallicity with respect to the variation of lattice constants of the Cr_xCd_1−xTe alloys.     

Ab initio calculations of structural,electronic, optical and thermodynamic properties of alkaline earth tellurides BaxSr1−XTe

Structural, electronic and thermodynamic properties of SrTe and BaTe compounds and their ternary mixed crystals Ba_xSr_1−xTe in the rock-salt structure have been studied with density functional theory (DFT), whereas the optical properties have been obtained by using empirical methods such as the modified Moss relation. The exchange-correlation potential was calculated using the generalized gradient approximation (GGA) of Perdew–Burke–Ernzerhof (PBE) and the local density approximation (LDA) of Teter–Pade (TP). In the present work, we used the virtual-crystal approximation (VCA) to study the effect of composition (x). The calculated lattice parameters at equilibrium volume and the bulk modulus for x=0 and x=1 are in good agreement with the literature data. Furthermore, the Ba_xSr_1−xTe alloys are found to be an indirect band gap semiconductor. In addition, we have also predicted the heat capacities (C_V), the entropy(S), the internal energy (U) and the Helmholtz free energy (F) of the parent compounds SrTe and BaTe.     

Compositional dependence of the optical properties of novel Ge-Ga-Te-CsI far infrared transmitting chalcohalide glasses system

A systematic series of (Ge₁₅Ga₁₀Te₇₅)_1−x(CsI)_x (x=0, 5, 10, 15 at%) far infrared transmitting chalcohalide glasses were prepared by the traditional melt-quenching method. The physical, thermal and optical properties were determined. The allowed direct transition and indirect transition of samples were calculated according to the Tauc equation. The results show that glass transition temperatures (T_g) were in the range 133-175 °C, with ΔT values between 81 and 130 °C. The highest values of metallization criterion (0.244) and energy gap (1.191 eV) were obtained for (Ge₁₅Ga₁₀Te₇₅)₈₅(CsI)₁₅. When the dissolved amount of CsI increased from 0 to 15 at%, the direct optical band gap and indirect optical band gap were in the ranges 0.629-1.075 eV and 0.438-0.524 eV, respectively. The Ge-Ga-Te-CsI glasses have an effective transmission window between 1.7 and 25 μm, encompassing the region of interest for bio-sensing applications.     

First-principles energy band calculation for undoped and N-doped InTaO4 with layered wolframite-type structure

The electronic structures of undoped and N-doped InTaO₄ with optimized structures are calculated within the framework of the density functional theory. Calculated lattice constants are in excellent agreement with experimental values, within a difference of 2%. The valence band maximum (VBM) is located near the middle point on the ZD line and the conduction band minimum (CBM) near the middle point on the DX line. This means that InTaO₄ is an indirect-gap material and a minimum theoretical gap between VBM and CBM is ca. 3.7 eV. The valence band in the range from −6.0 to 0 eV mainly consists of O 2p orbitals, where In 4d5s5p and Ta 5d orbitals are slightly hybridized with O 2p orbitals. On the other hand, the conduction band below 5.5 eV is mainly composed of the Ta 5d orbitals and the contributions of In and O orbitals are small. The band gap of N-doped InTaO₄ decreases by 0.3 eV than that of undoped InTaO₄, because new gap states originating from N 2p orbitals appear near the top of the valence band. This result indicates that doping of N atoms into metal oxides is a useful method to develop photocatalysts sensitive to visible light.     

Theoretical investigations of the structural,electronic and optical properties of Hg1−xCdxTe alloys

The structural, electronic and optical properties of mercury cadmium telluride (Hg_1?xCd_xTe; x = 0.0, 0.25, 0.5, 0.75) alloys are studied using density functional theory within full-potential linearized augmented plane wave method. We used the local density approximation (LDA), generalized gradient approximation (GGA), hybrid potentials, the modified Becke–Johnson (LDA/GGA)-mjb and Hubbard-corrected functionals (GGA/LDA + U), for the exchange-correlation potential (E_ex). We found that LDA functional predicts better lattice constants than GGA functional, whereas, both functionals fail to predict the correct electronic structure. However, the hybrid functionals were more successful. For the case of HgTe binary alloy, the GGA + U functional predicted a semi-metallic behaviour with an inverted band gap of ?0.539 eV, which is closest to the experimental value (?0.30 eV). Ternary alloys, however, are found to be semiconductors with direct band gaps. For the x = 0.25 and 0.50, the best band gaps are found to be 0.39 and 0.81 eV using LDA-mbj functional, whereas, the GGA-mbj functional predicted the best band gap of 1.09 eV for Hg_0.25Cd_0.75Te alloy, which is in a very good agreement with the experimental value (1.061 eV). The optical properties of the alloys are obtained by calculating the dielectric function ?(ω). The peaks of the optical dielectric functions are consistent with the electronic gap energies of the alloys.     

Theoretical study of magnetic ordering and electronic properties of AgxAl1−x N compounds

Ferromagnetic ordering of silver impurities in the AlN semiconductor is predicted by plane-wave ultrasoft pseudopotential and spin-polarized calculations based on density functional theory (DFT). It was found that an Ag impurity atom led to a ferromagnetic ground state in Ag_0.0625Al_0.9375N, with a net magnetic moment of 1.95 μ_B per supercell. The nitrogen neighbors at the basal plane in the AgN₄ tetrahedron are found to be the main contributors to the magnetization. This magnetic behavior is different from the ones previously reported on transition metal (TM) based dilute magnetic semiconductor (DMS), where the magnetic moment of the TM atom impurity is higher than those of the anions bonded to it. The calculated electronic structure band reveals that the Ag-doped AlN is p-type ferromagnetic semiconductor with a spin-polarized impurity band in the AlN band gap. In addition, the calculated density of states reveals that the ferromagnetic ground state originates from the strong hybridization between 4d-Ag and 2p-N states. This study shows that 4d transition metals such as silver may also be considered as candidates for ferromagnetic dopants in semiconductors.     

Comparison of site-specific valence band densities of states determined from Auger spectra and XPS-determined valence band spectra in GeS (001) and GeSe (001)

Auger lineshapes of the Ge M₁M_4,5V and M₃M_4,5V and Se _M1M_4,5V transitions in GeS (001) and GeSe (001) are measured and compared to XPS valence band spectra. Distortions in both types of spectra due to inelastic scattering, analyzer and source broadening, and core level lifetime broadening are removed by deconvolution techniques. The valence band consists of three main peaks at ?2 eV, ?8 eV, and ?13 eV. There is excellent agreement of peak positions in AES and XPS spectra. The Auger lineshapes can be interpreted in terms of site-specific densities of states. They indicate that the states at ～?8 eV and at ～?13 eV are associated with the cation and anion sites respectively. The bonding p-like states at the top of the valence band have both cation and anion character. The Auger lineshapes indicate that the states closest to the valence band maximum are preferentially associated with Ge.     

Structural and optical properties of In35Sb45Se20−xTex phase-change thin films

Physical properties of In₃₅Sb₄₅Se_20−xTe_x thin films with different compositions (x=2.5, 5, 7.5, 10, 12.5 and 15 at %) prepared by electron beam evaporation method are studied. X-ray diffraction results indicate that the as-evaporated films depend on the Te content and the crystallized compounds consist mainly of Sb₂Se₃ with small amount of Sb₂SeTe₂. Transmittance and reflectance of the films are found to be thickness dependent. Optical-absorption data indicate that the absorption mechanism is direct transition. Optical band gap values decrease with increase in Te content as well as with increase in film thickness.     

Preparation and properties of spray-deposited ZnIn2Se4 nanocrystalline thin films

Zinc indium selenide (ZnIn₂Se₄) thin films have been deposited onto amorphous and fluorine doped tin oxide (FTO)-coated glass substrates using a spray pyrolysis technique. Aqueous solution containing precursors of Zn, In, and Se has been used to obtain good quality deposits at different substrate temperatures. The preparative parameters such as substrate temperature and concentration of precursors solution have been optimized by photoelectrochemical technique and are found to be 325 °C and 0.025 M, respectively. The X-ray diffraction patterns show that the films are nanocrystalline with rhombohedral crystal structure having lattice parameter a=4.05 Å. The scanning electron microscopy (SEM) studies reveal the compact morphology with large number of single crystals on the surface. From optical absorption data the indirect band gap energy of ZnIn₂Se₄ thin film is found to be 1.41 eV.     

Ab initio calculations study of the electronic, optical and thermodynamic properties of NaMgH3, for hydrogen storage

The structural stability, electronic structure, optical and thermodynamic properties of NaMgH₃ have been investigated using the density functional theory. Good agreement is obtained for the bulk crystal structure using both the local density approximation (LDA) and the generalized gradient approximation (GGA) for the exchange-correlation energy. It is found from the electronic density of states (DOS) that the valence band is dominated by the hydrogen atoms while the conduction band is dominated by Na and Mg empty states. Also, the DOS reveals that NaMgH₃ is a large gap insulator with direct band gap 3.4 eV. We have investigated the optical response of NaMgH₃ in partial band to band contributions and the theoretical optical spectrum is presented and discussed in this study. Optical response calculation suggests that the imaginary part of dielectric function spectra is assigned to be the interband transition. The formation energy for NaMgH₃ is investigated along different reaction pathways. We compare and discuss our result with the measured and calculated enthalpies of formation found in the literature.     

Absolute photonic band gaps in a two-dimensional photonic crystal with hollow anisotropic rods

The plane-wave expansion method is used to calculate photonic band gaps for two structures with hollow anisotropic tellurium (Te) rods. Both structures are found to have absolute band gaps at the low- and high-frequency regions. Compared with the photonic crystal with solid Te rods, the photonic crystal with hollow Te rods has a large absolute band gap at the high-frequency region: for the triangular lattice of oval hollow Te rods, there is an absolute band gap of 0.058w_e (w_e=2πc/a), and for the square lattice of square hollow Te rods, there is an absolute band gap of 0.056w_e.     

Crystal structure and cation distribution in the solid solution series 2(ZnX)-CuInX2 (X=S, Se, Te)

The solid solution series (2ZnX)_x (CuInX₂)_1−x (X=S, Se, Te) were studied by the combination of laboratory and synchrotron X-ray and by neutron powder diffraction. Within the homologous series the tetragonal distortion ¼-u increases in the sequence S→Se→Te whereas the tetragonal deformation η=c/2a decreases. Besides that, with increasing 2ZnX content in CuInX₂ the anion position parameter u increases as expected. The cation site occupancy in the chalcopyrite type phase of single phase tetragonal samples was obtained by Rietveld analysis of the neutron diffraction data. A non-statistic Zn distribution could be deduced for all three systems. The high temperature in situ diffraction experiments with synchrotron radiation on CuInX₂ powder samples revealed the Cu-In anti-site occupation as the driving force of the temperature dependent phase transition from the chalcopyrite to the zinc-blende type structure.