Antisymmetric exchange interaction,magnetoelectric and magnetodielectric response in structurally distorted G-type antiferromagnetic perovskite: La0.9Gd0.1FeO3

Detailed structural analysis of the X-Ray diffraction pattern of La_0.9Gd_0.1FeO₃ (LGFO) synthesized via the solid state reaction reveals distorted perovskite structure. Magnetization studies show a characteristic of weak ferromagnetism which is believed to be induced by canted anti-ferromagnetically coupled spins. When explored in a wide temperature and frequency range, AC electrical properties reveal interesting relaxation mechanisms. LGFO exhibits relatively high dielectric permittivity (ε′~4×10³) close to room temperature. Temperature dependent magneto-dielectric response appears (magnetodielectric ~−5.5%) even at low magnetic field ~5 kOe. Attractive electrical, magnetic and magnetoelectric properties of the present LGFO at relatively higher temperature makes it a very promising material for application in devices.     

On the superconductivity in in situ synthesized MgB2 tapes

Single core stainless steel (SS) sheathed MgB₂ tapes have been made by the powder-in-tube (PIT) method using commercial Mg and B powders in two series, one with nominal composition and the other with excess Mg. The electrical resistivity and susceptibility measurements have been carried out to evaluate residual resistivity ratio (RRR), the coherence length ξ(0) and critical current density J_C(T) in these tapes. Detailed structural analysis of the core material has been carried out to correlate the superconducting properties with the crystallinity. In the optimized growth condition the MgB₂ tapes exhibited an estimated J_C of ∼1.4×10⁷ A/m² at 39.45 K in zero field and the zero temperature coherence length is found to be ∼68 Å. MgB₂ tapes fabricated from starting powders having nominal Mg-composition have been shown to exhibit higher J_C than those fabricated from excess magnesium composition of the starting powders. The strained lattice together with the presence of nanosized MgO inclusion having size smaller than the coherence length, are shown to be responsible for the observed higher J_C.     

Low field AC susceptibility study of intergranular critical current density in Mg-substituted CuBa2Ca3Cu4O12−y high temperature superconductors

Measurements of the a.c.susceptibility (χ=χ′+iχ″) have been made on the Mg substituted high T_C superconducting system, CuBa₂(Mg_xCa_1−x)₃Cu₄O_12−y (Cu-1234) with x=0, 0.10 & 0.20, at different values of the a.c.field amplitude. Estimates of the intergranular critical current density(J_C) made from the field dependent χ″-T curves show an improvement in the Mg-substituted Cu-1234 system. Results have been analysed in the light of the crystal structure and the superconducting anisotropy factor (γ=ξ_ab/ξ_c) of the Cu-1234 system. Lower superconducting anisotropy emanating from Mg substitution has been found to be significant, resulting in better superconducting properties.     

A novel high-k ‘Y5V’ barium titanate ceramics co-doped with lanthanum and cerium

Structural, dielectric, and ferroelectric properties of a novel high-k ‘Y5V’ (Ba_1−xLa_x)(Ti_1−x/4−yCe_y)O₃ ceramics (where x=0.03 and y=0.05, denoted by BL3TC5) with the highest ‘Y5V’ dielectric response (ε′>10 000) among rare-earth-doped BaTiO₃ ceramics to date are investigated in detail using SEM, TEM, XRD, DSC, EPR, Raman spectroscopy (RS), temperature and frequency, electric field dependences of dielectric permittivity (ε′), and temperature and electric field dependences of ferroelectric hysteresis loops. The BL3TC5 diffusion of ferroelectric phase transition occurs around dielectric peak temperatures (T_m) near a room temperature characteristic of dielectric thermal relaxation. Powder XRD data and defect complex model were given. “Relaxor” behavior associated with an order/disorder model and formation of a solid solution were discussed. The EPR results provided the evidence of Ti vacancies as compensating for lattice defects. High-k relaxor nature of BL3TC5 is characterized by an average cubic structure with long-range lattice disordering and local polar ordering; a slow change of the ε′ (T) and P_r(T) curves around T_m; no phase transition observed by DSC; and a broad, red-shifted A₁ (TO₂) Raman phonon mode at 251 cm⁻¹ accompanying the disappearance of the “silent” mode at 305 cm⁻¹ and a clear anti-resonance effect at 126 cm⁻¹ at room temperature.     

Enhanced flux pinning in pulsed laser deposited Y Ba2Cu3O7−δ : BaTiO3 nanocomposite thin films

The effect of incorporation of BaTiO₃(BTO) nanoparticles on the flux pinning properties of pulsed laser deposited YBCO:BTO thin films was studied. Substantial increase in the critical current density (J_C) and the pinning force density (F_p) of the nanocomposite thin films was observed. At 77 K, and zero applied magnetic field, the value of J_C for YBCO and YBCO:BTO (2%) thin films were 2.93 MA/cm² and 6.43 MA/cm², respectively. At the same temperature and an applied magnetic field of 4 T, the value of J_C increases from 3.6×10⁴ A/cm² for YBCO thin film to 2.7×10⁵ A/cm² for YBCO:BTO (2%) nanocomposite thin film. The study of temperature and field dependence of of YBCO and YBCO:BTO thin films indicates similar type of pinning. The lattice mismatch between YBCO and BTO seems to introduce more defects resulting in the improvement of flux pinning properties.     

Structure and high pressure behaviour of organic crystals based on aromatically substituted 1,3,4-oxadiazoles

The crystalline structure of a new compound containing the 1,3,4-oxadiazole moiety, 4-(5-methyl-1,3,4-oxadiazole-2yl-)-N,N′-dimethyl-phenylamine (MODPA) was determined. It shows a monoclinic structure with space group P2₁/c and lattice parameters: a=1.02997(6), b=0.64840(4), c=1.58117(10) nm and β=99.4820(10)°. To study the intermolecular interactions in oxadiazole containing organic crystals, X-ray studies on MODPA and 2,5-diphenyl-1,3,4-oxadiazole (DPO) were performed up to 5 GPa at room temperature. The Murnaghan equation of state is used to describe the compression behaviour of both substances. From these results, the bulk modulus and its pressure derivative were determined. The values obtained are: K₀=6.3 GPa and K′₀=6.8 for MODPA and K₀=7.3 GPa and K′₀=6.7 for DPO. Additionally, measurements under increasing temperature at ambient pressure were carried out to evaluate the thermal expansion coefficient: α=1.8×10⁻⁴ K⁻¹ for MODPA and α=1.9×10⁻⁴ K⁻¹ for DPO.     

Magnetic and related properties of the solid solution CeCuxGa4−x

Physical properties of polycrystalline samples of CeCu_xGa_4−x (x = 0.2–1.4), crystallizing in the tetragonal BaAl₄-type structure (space group I 4/mmm), were studied by means of X-ray powder diffraction, magnetization, specific heat, electrical resistivity and magnetoresistivity measurements in wide temperature and magnetic fields ranges. The unit-cell volume of the system was found to decrease with increasing x (in total by about 4%) but the magnetic moments of Ce³⁺ ions remain localized in the whole x-range studied. The alloys exhibit ferromagnetic order at low temperatures, which manifests itself as distinct and relatively sharp anomalies in all the temperature characteristics measured. The ordering temperature decreases with increasing the Cu content from 5.5(1) K for x = 0.2 down to 1.35(5) K for x = 1.4, and the electrical transport properties of the system show some features characteristic of Kondo lattices.     

Comparison of piezoelectricity in Ta and La substituted lead calcium titanate ceramics

This paper reports the experimental investigations on the effect of La³⁺ and Ta⁵⁺ substitution on the structural characteristics and dielectric and piezoelectric properties of lead calcium titanate (PCT) ceramic. The PCT samples with A-site and B-site substitution having the composition formula Pb_0.76−x/2La_xCa_0.24(Ti_0.98Mn_0.02)_1−x/2O₃ and Pb_0.76Ca_0.24Mn_0.02Ti _0.98−5x/4Ta_xO₃, x=0 and 0.02, respectively_, were prepared using conventional solid-state reaction method. Phase formation and structural analysis were studied using X-ray diffraction and scanning electron microscopy, respectively. Dielectric constant (ε′) and loss tangent (tan δ) as a function of frequency were measured at room temperature as well as elevated temperature. Both ε′ and tan δ decreased with increase in frequency at room temperature. Curie temperature decreased with La and Ta doping in PCT ceramics due to a decrease in the tetragonality of PCT ceramics. Piezoelectric charge coefficients (d₃₃, d₃₁) increased with La³⁺ substitution due to reorientation of the grains and decreased with Ta⁵⁺ substitution because of the increase in porosity. Figure of merit d_hg_h increased and decreased with La and Ta substitution, respectively. A good ferroelectric behaviour is obtained for La substitution, while no hysteresis is obtained for Ta substitution.     

Carbon doping in MgB2: role of boron and carbon px(y) bands

We have studied the changes in the electronic structure and the superconducting transition temperature T_c of Mg(B_1−xC_x)₂ alloys as a function of x with 0≤x≤0.3. Our density-functional-based approach uses the coherent-potential approximation to describe the effects of disorder, the Gaspari-Gyorffy formalism to estimate the electron-phonon matrix elements and the Allen-Dynes equation to calculate T_c in these alloys. We find that the changes in the electronic structure of Mg(B_1−xC_x)₂ alloys, especially near the Fermi energy E_F, come mainly from the outward movement of E_F with increasing x, and the effects of disorder in the B plane are small. In particular, our results show a sharp decline in both B and C p_x(y) states for 0.2≤x≤0.3. Our calculated variation in T_c of Mg(B_1−xC_x)₂ alloys is in qualitative agreement with the experiments.     

Temperature dependent transport properties of CuInSe2-ZnO heterostructure solar Cell

Experimental study of dc and ac transport properties of CuInSe₂/ZnO heterostructure is presented. The current-voltage (I-V) and frequency dependent capacitance (C-f) characteristics of CuInSe₂/ZnO heterostructure were investigated in the temperature range 160-393 K. The heterostructure showed non-ideal behavior of I-V characteristics with an ideality factor of 3.0 at room temperature. Temperature dependent dc conductivity studies exhibited Arrhenius type behavior and revealed the presence of trap level. The C⁻²-V plot measured at frequency 50 kHz had shown non-linear behavior. An increase in capacitance with temperature was observed. The capacitance-frequency characteristics exhibited a transition between low frequency and the high frequency capacitance. As the temperature was lowered the transition occurred at lower frequencies. The frequency and temperature dependent device capacitance had shown a defect state having activation energy of 108 meV.     

Vibrational study,phase transitions and electrical properties of 4-benzylpyridinium monohydrogenselenate

The title compound C₆H₅CH₂C₅H₄NH⁺·HSeO₄⁻ crystallizes in the orthorhombic system with the space group Pbca and the following unit cell dimensions: a=27.449(5) Å; b=10.821(6) Å and c=8.830(1) Å.The structure consists of infinite parallel two-dimensional planes built of HSeO₄⁻ anions and C₆H₅CH₂C₅H₄NH⁺ cations mutually.Differential scanning calorimetry study on 4-benzylpyridinium monohydrogen-selenate was carried out. A high temperature second order phase transition at 363 K was found and characterized by electric measurements. The Raman of polycrystalline sample has been recorded at different temperature between 297 and 373 K.The conductivity relaxation parameters associated with some H⁺ conduction have been determined from an analysis of the M′′/M′′_max spectrum measured in a wide temperature range. An appearance of the superionic phase transition in 4-BSe is closely related to a liberation or even a rotation increase of HSeO₄⁻ groups with heating.     

Effect of growth rate and Mg content on dendrite tip characteristics of Al–Cu–Mg ternary alloys

An experimental analysis is presented to correlate the secondary dendrite arm spacing λ ₂ and dendrite tip radius R with growth rate V and Mg content C _0-Mg of Al–Cu–Mg ternary alloys. Under constant temperature gradient G (4.84±0.13 K mm⁻¹), a series of directional solidification experiments were performed at five different growth rates V (16.7–83.3 μm/s) and five different Mg contents C _0-Mg in Al–5 wt.% Cu–(0.5–5) wt.% Mg alloys. Solid–liquid interface was investigated from the longitudinal sections of the quenched samples, and λ ₂ and R were measured on the dendrite tips. The dependencies of λ ₂ and R on V and C _0-Mg were determined. The experimental results showed that the values of λ ₂ and R decrease as V and C _0-Mg increase at a constant G. The present exponent values related to V are found to be slightly lower than the values of the theoretical models and previous experimental works; however, C _0-Mg exponent values are found to be much lower than the theoretical models and previous experimental works. The ratio of the secondary dendrite arm spacing to the dendrite tip radius is 2.09±0.15, in good agreement with the scaling law. At a constant C _0-Mg, the values of VR ² were found to slightly increase with the ascending V. However, as C _0-Mg increases, the values of VR ² decrease.     

On the mechanical stability of bcc transition elements and alloys

A volume independent and a volume dependent lattice energy function involving short-range interatomic potentials were able to be fitted to the elastic constants, cohesive energy, lattice parameter and for the latter function to the vacancy formation energy and bcc-fcc lattice stability energy, as well, for fcc metals and bcc alkali metals, but not to the cohesive energy and C' elastic constant of bcc transition metals. The assumption that directional, but partial, covalent bonds exist between nearest-neighbors in the bcc transition elements provides an explanation for the latter results and in addition explains the identical dependence of C' and the bcc-fcc lattice stability upon N_d, where N_d is the average number of d electrons, for the bcc transition metals and alloys. Both the mechanical and thermodynamic stability of the bcc structure for transition metals and all transition metal alloys disappears for 5 ? N_d > 2 and <?1.     

Magnetic properties of half-metallic semi Heusler Co1−xCuxMnSb compounds

A study of the half-metallic character of the semi Heusler alloys Co_1−xCu_xMnSb (0?x?0.9) is presented. We investigated the saturation magnetization M_S at temperatures from 5 K to room temperature and the temperature dependence of the DC magnetic susceptibility χ above Curie temperature T_C. The magnetic moments at 5 K, for most compositions are very close to the quantized value of 4 μ_B for Mn³⁺ ion, the compound with 90% Co substituted by Cu is still ferromagnetic with M_S (5 K)=3.78 μ_B/f.u. These results emphasize the role of Co atoms in maintaining the ferromagnetic order in the material. The Curie temperature is decreased from 476 K to about 300 K as the Cu content increases from 0% to 90%. Above T_C, the χ⁻¹ vs T curves follow very well the Curie–Weiss law. The effective moment μ_eff and paramagnetic Curie temperature θ are derived. A comparison between the values of M_S at 5 K and μ_eff shows a transition from localized to itinerant spin system in these compounds.     

High frequency shear ultrasonic properties of water/sorbitol solutions

Dynamic viscoelastic properties (G′ and G′′), ultrasonic shear velocity and attenuation were measured for aqueous solutions of sorbitol at 5 MHz. For pure sorbitol, the shear ultrasonic velocity reached 1470 m s⁻¹ with a density of 1500 kg m⁻³, consequently leading to a high acoustical impedance compared with “classical” polymers (polystyrene, nylon, polyethylene, Teflon, etc.). We demonstrate that this surprisingly high shear ultrasonic velocity for a viscoelastic material was due to the fact that the glass transition begins at a concentration above 85% of sorbitol in water. Hence, pure sorbitol is an ideal coupling material for high frequency shear experiments.     

Effect of carbon doping on thermodynamic behavior of MgB2

The thermodynamic behavior of carbon doped MgB₂ has been studied using a rigid ion model (RIM). The model potential consists of the long-range Coulomb, the short-range repulsive and the van der Waals interactions. This model has successfully explained the cohesive and thermodynamic properties of Mg(B_1−xC_x)₂ (x=0.0, 0.02, 0.05, 0.075, 0.1, 0.2). The properties studied are the cohesive energy, molecular force constant, Restrahlen frequency, compressibility, Debye temperature and Gruneisen parameter. Our results on Restrahlen frequency and Debye temperature are in reasonably good agreement with the available experimental data. In addition, we have computed the specific heat C_p for Mg(B_1−xC_x)₂ (x=0.2) as a function of temperature T in the range 16 K?T?1000 K. We have also shown the variation of specific heat C_p with doping concentration at room temperature (300 K). The calculated specific heat C_p for Mg(B_1−xC_x)₂ (x=0.2) in the temperature range 16 K?T?22 K for which experimental results are available, agrees pretty well with the experimental data.     

MgB2 fabrication by diffusion-controlled three layered (B-Mg-B) technique

MgB₂ was successfully fabricated through diffusion-controlled three-layered (B-Mg-B) technique under high pressure. Due to melting temperature of Mg, the material was pre-heat treated at 600 °C between 1 and 48 h. Optimum pre-heat treatment condition was found to be 600 °C for 48 h. Then, the compacted material was grinded and pelletized under pressure of 2 ton. The pellets were heat treated at 600-900 °C for 1-48 h. Optimum heat treatment condition was determined to be 800 °C for 1 h for formation of almost pure MgB₂. Diffusion coefficient was determined with Fick's law and EDX data. Diffusion coefficient value for B in Mg matrix and Mg in B matrix was determined to be 1.66×10⁻⁷ and 3.14×10⁻⁸ cm²/sn, respectively. Best T_c value (39.4 K) was obtained for material heat treated at 800 °C for 1 h. A symmetric hysteresis was obtained for the best MgB₂ material and magnetization decreased with increase in the temperature and the applied magnetic field.     

Investigation of energy transfer and frequency upconversion in Ho/Yb co-doped tellurite glasses

A serials of Ho³⁺/Yb³⁺ co-doped tellurite glasses by pumping 970 nm laser diode (LD) were demonstrated to obtain a high efficiency of infrared-to-visible upconversion. Two intense emission bands were observed in Ho³⁺/Yb³⁺ co-doped tellurite glasses centered at 549 and 664 nm corresponding to Ho³⁺: ⁵S₂(⁵F₄)→⁵I₈ and ⁵F₅→⁵I₈ transitions, respectively. The upconversion intensities of red and green emissions in Ho³⁺/Yb³⁺ co-doped glasses were enhanced largely when increasing Yb₂O₃ content. The dependence of upconversion intensities on excitation power and the possible upconversion mechanisms had been evaluated by a proper rate equation model. The energy transfer coefficients were estimated by fitting the simulated curves to the measured ones. The obtained three energy transfer coefficients C_D2, C_D3 and C_D4 were C_D2=5.0×10⁻¹⁸ cm³/s, C_D3=1.5×10⁻¹⁷ cm³/s, C_D4=9.0×10⁻¹⁷ cm³/s.     

Mössbauer spectroscopic study of the thermal spin crossover in [Fe(II)(isoxazole)6](ClO4)2

The ⁵⁷Fe Mössbauer spectroscopy of mononuclear [Fe(II)(isoxazole)₆](ClO₄)₂ has been studied to reveal the thermal spin crossover of Fe(II) between low-spin (S=0) and high-spin (S=2) states. Temperature-dependent spin transition curves have been constructed with the least-square fitted data obtained from the Mössbauer spectra measured at various temperatures between 84 and 270 K during a cooling and heating cycle. This compound exhibits an unusual temperature-dependent spin transition behaviour with T_C(↓)=223 and T_C(↑)=213 K occurring in the reverse order in comparison to those observed in SQUID observation and many other spin transition compounds. The compound has three high-spin Fe(II) sites at the highest temperature of study of which two undergo spin transitions. The compound seems to undergo a structural phase transition around the spin transition temperature, which plays a significant role in the spin crossover behaviour as well as the magnetic properties of the compound at temperatures below T_C. The present study reveals an increase in high-spin fraction upon heating in the temperature range below T_C, and an explanation is provided.     

Lattice mechanical properties of alkaline earth metals in bcc and fcc phases

A model pseudopotential depending on an effective core radius treated as a parameter is used for alkaline earth metals in bcc and fcc phases to study the Binding energy, Interatomic interactions, phonon dispersion curves, Phonon density of states, Debye-Waller factor, mean square displacement, Debye-Waller temperature parameters, dynamical elastic constants (C₁₁, C₁₂ and C₄₄), bulk modulus (B), shear modulus (C′), deviation from Cauchy relation (C₁₂−C₄₄), Poisson's ratio (σ), Young's modulus (Y), behavior of phonon frequencies in the elastic limit independent of the direction (Y₁), limiting value in the [1 1 0] direction (Y₂), degree of elastic anisotropy (A) and propagation velocities of the elastic waves. The contribution of s-like electrons is incorporated through the second-order perturbation theory due to model potential. The theoretical results are compared with the existing experimental data. A good agreement between theoretical investigations and experimental findings has confirmed the ability of our potential to yield large numbers of lattice mechanical properties of certain alkaline earth metals.