二元颗粒混合物按质量取样的误差研究

二元颗粒混合物的随机取样方式有两种：一是按颗粒数目取样,二是按质量取样本文对二元颗粒混合物按质量取样的误差进行了深入研究,详细分析了混合物的各种参对被测组分含量取样误差的影响,应用Ｍｏｎｔｅ Ｃａｒｌｏ技术对取样进行了模拟。以颗粒药品的二元混合物为例对按颗粒数目取样和按质量取样的误差进行了比较。此项研究对于分析取样理论和应用具有重要的价值。     

比例方程法测定重稀土二元混合物

比例方程法是速差动力学分析中常用的方法,Яцимирский和Степаиов^[1,2]曾用此法测定稀土混合物。此法的缺点是需要准确控制时间,手工操作时误差较大。     

流体混合物热力学性质的分子模拟研究-逐级取样法

本文对三个Lennard-Jonese二元混合物进行了逐级取样模拟, 获得各体系的超额Helmholtz自由能, 超额内能及超额压力等性质, 所得结果与Nakanishi通过伞形取样法的结果一致, 表明本文方法能够有效地对混合物各类超额性质进行研究。     

非缔合二元有机液体混合物过剩热容的测定与计算

溶液的过剩热容是热力学的重要函数，对其测定与研究具有理论与实际意义．过剩热容不仅可检验溶液中分子间的相互作用，并可利用其计算混合物的热容．本文报告了用微量热仪对环乙烷一本等七个二元物系全浓度范围内在29815K、常压下过剩热容CEp进行的测定工作，上述体系是由具有     

组合取样的误差理论研究及其Monte Carlo模拟

基于多项分布理论,建立了组合取样方差与取样总体中各子区的大小及其组分含量之间的关系和计算公式,探讨了组合取样常数的物理意义.以颗粒物质为例,探讨了组合取样的逻辑质量单元的概念及其意义,为确定组合取样中的份样质量提供了理论依据.本文对于完善组合取样误差理论,保证组合取样的质量均具有重要意义.     

颗粒移动床过滤过程的数学模型

利用Ｃ．Ｔｉｅｎ等的固定床过滤净床模型及Ｔ．Ｔａｋａｈａｓｉ等的固定床过滤动态模型,通过合理定义移动床过滤对应于固定床过滤模型中的比沉积率σ参数以及对某些系数的修正,建立了模拟颗粒移动床过滤过程包含参数较为完整的数学模型并与试验结果进行了对照,结果表明此模型能够正确描述颗粒移动床过滤过程     

分层性物质的组合取样误差与份样数目之间的关系及其Monte Carlo模拟

本文从理论上研究了分层性物质的组合取样误差与份样数目之间的定量关系，表明份样数目与组合取样相对标准偏差的平方之积为一常数，称为组合取样常数，它与Ｉｎｇａｍ ｅｌｌｓ 和Ｓｗ ｉｔｚｅｒ 提出的取样常数是相似的，表示６８％ 置信度下组合取样的相对标准偏差达到１％ 时的份样数目。应用Ｍｏｎｔｅ Ｃａｒｌｏ 模拟技术对该理论进行了验证，结果令人满意。     

甲醇-水二元混合物中Co(bpb)与叠氮离子反应的动力学研究

Co(bpb) [bpbH2 is N,N'-o-phenylenebis(pyridine-2-carboxamide), C18H12N4O2] complex has active axial sites like a porphyrin complex. We studied the coordination of azide ion (N-3) to Co(bpb) in binary methanol-water mixtures by spectrophotometric method at the temperature range of 283-303 K. From the temperature dependence of the rate constant, activation parameters (Ea, △H#, △S#, and △G#) were obtained. An isokinetic temperature at about 302 K was observed at which the formation rate of Co(bpb)-N-3 was more or less independent of the solvent composition. The resulting △H against T△S plot showed a good linear correlation, indicating the existence of enthalpy-entropy compensation in azide complexation process. Under optimum conditions and based on the absorbance of Co(bpb)-N-3 produced through complex formation, a spectrophotometric method for the determination of N-3 in solution was developed.Alinear relationship between the absorbance and N-3 concentration was obtained in the range of (0.85-5.00)×10-4 mol·L-1 (3.6-21.0 μg·mL-1). The detection limit was 2.5×10-5 mol·L-1 (1.0 μg·mL-1). The proposed method was applied to the determination of N-3 anion in real water samples.     

分析测试中取样单元数的确定——关于分析化学教材中取样问题的商榷

对武汉大学主编的《分析化学》（上册）第5版教材中关于取样单元数的计算进行了讨论,指出测量次数与采样单元数是不同的概念,在已知采样单元间的标准偏差估计值和允许误差的情况下,采样单元数应该用试差法求得。     

二元复杂混合物组成的定量SEC分析

提供了一种体积排除色谱(SEC)的绝对定量分析方法以解决复杂的二元混合物组成的定量分析问题.首先对传统的SEC数据处理方法作了改进,将示差检测响应信号H(V)除以样品进样质量,得到单位质量的示差折光检测响应分布Hw(V)和累积分布Iw(V),这两个分布与试样的检测响应常数有关.然后将Hw(V)除以总面积,再得到常规的归一化分布F(V).混合物检测响应常数的不同,提供了一种从单独组分的Hw(V)或Iw(V)分布,运用加和计算共混物的Hw(V)或Iw(V)分布,得出二元混合物的组成.运算过程利用最小差方和的枚举计算方法,在一个自行编写的Mathcad程序工作单上进行.应用该方法对一种工业沥青和两种稀释剂配成的二元混合物作了范例分析,得到满意结果.     

粒状物质的微观均匀度及其对取样误差的影响分析

研究物质的取样属性与以取样误差之间的关系是分析化学取样学的重要内容。从微观角度探讨了物质的理论性质及其对取样误差的影响。以碳化硅为例,考察了粒度分布、组分随粒度的变化以及均匀度因子等,分析了取样误差的来源。首次通过粒度分级成功地对碳化硅进行了分层,并对分层取样和随机取样的误差进行了分析和讨论,为制定合理的取样方案提供了有利的依据。本文的研究方法可适用于所有粒状物质的取样,同时也为分析化学取样学的深     

Absolute Minimal Sampling of Homonuclear 2D NMR TOCSY Spectra for High-Throughput Applications of Complex Mixtures

Modern applications of 2D NMR spectroscopy to diagnostic screening, metabolomics, quality control, and other high-throughput applications are often limited by the time-consuming sampling requirements along the indirect time domain t₁. 2D total correlation spectroscopy (TOCSY) provides unique spin connectivity information for the analysis of a large number of compounds in complex mixtures, but standard methods typically require >100 t₁ increments for an accurate spectral reconstruction, rendering these experiments ineffective for high-throughput applications. For a complex metabolite mixture it is demonstrated that absolute minimal sampling (AMS), based on direct fitting of resonance frequencies and amplitudes in the time domain, yields an accurate spectral reconstruction of TOCSY spectra using as few as 16 t₁ points. This permits the rapid collection of homonuclear 2D NMR experiments at high resolution with measurement times that previously were only the realm of 1D experiments.     

A mathematical model of the logical structure of chemistry. A bridge between theoretical and experimental chemistry and a general tool for computer-assisted molecular design

Summary A mathematical model of the logical structure of chemistry is suggested. The model is based on the phenomenon of convertibility between chemical species which is expressed by the so-called convertibility function . In the center of the model there is the potential energy (hyper)surface, PES. A heuristic modification of the general convertibility function is presented. Several algorithms have been developed for an analysis of PES which is described by paths, and for heuristic obtaining of PES paths. The notion ofK-barrier of conformational PES is introduced as well as an algorithm for its computation.     

一种新的有机污染物采样装置

介绍了一种由类脂物和半透膜组成的采样装置,该装置可模拟生物监测可被生物订的有机污染物。将其用于监测大气、水体、沉积物中的多氯联苯（ＰＣＢｓ）、有机氯农药（ＯＣＰ）和多环芳烃（ＰＡＨｓ）时,结果满意。     

烯烃聚合数学模拟研究与现状

综述了近年来国内外在烯烃聚合微观形态和宏观反应器数学模拟方面取得的研究成果，指出了烯烃聚合过程数学模拟的发展方向。     

A Low Cost Gas Sampling Valve and Gc Set-Up for Analysis of Low Concentration Gas Mixtures

Abstract

A gas sampling valve suitable for on-line injection of low pressure (< 0.5 torr) gas mixtures is described. Its advantages over the commercially available valves are enumerated. An error of < 3 per cent due to non-reproducibility in sample injection was observed. A simple arrangement of column and hot wire detector together with this valve enabled quantitative separation of CO and O₂ with a lower limit of ～ 1 × 10^?7 moles for each component.     

Pseudomonas stutzeri 1317合成中长链聚羟基脂肪酸酯的组成分析模型

Pseudomonasstutzeri 1317可以在不同碳源上生长,合成不同共聚单体单元组成的中长链聚羟基脂肪酸酯(mclPHAs).本文在已知的代谢途径的基础上,提出了关于mclPHAs组成的数学模型,结果表明,mclPHAs的共聚单体单元组成主要取决于前体生成途径,以及该途径和聚合途径酶对不同碳原子数前体的选择性.实验结果与文献报道结果均验证了该模型.代谢控制分析的结果表明,碳数为8～10的前体的聚合效率最高.通过调制前体生成途径,可以有效调节PHA的单体单元组成.     

Mathematical modeling of flow and kinetics in a reactor for dilute-acid hydrolysis of cellulose particles

Amathematical model to simulate the dilute-acid hydrolysis process of cellulose particles is presented. In this model, the mass is treated as a mixture of different components. A test case is considered for which transport equations for components are developed and solved together with the momentum equation for the fluid flow. To solve the model equations, a commercially available flow solver was used. All input data were taken from previously published works. For the small static mixer considered as test geometry, the result, in terms of the conversion of the cellulose particles, was reasonable. With input parameters that are relevant to a plant-size reactor, the model can be used to predict the conversion of both cellulose and hemicellulose particles.