Homogeneous catalysts supported on soluble polymers: biphasic Suzuki-Miyaura coupling of aryl chlorides using phase-tagged palladium-phosphine catalysts

The Suzuki-Miyaura coupling of aryl chlorides and PhB(OH)(2) under biphasic conditions (DMSO/heptane) can be performed in almost quantitative yields over several cycles by means of polymeric Pd catalysts with soluble polyethylene glycol phase tags. Three sterically demanding and electron-rich phosphines 1-CH(2)Br,4-CH(2)P(1-Ad)(2)-C(6)H(4), and 2-PCy(2),2'-OH-biphenyl, and 2-PtBu(2),2'-OH-biphenyl were covalently bonded to 2000 Dalton MeOPEG-OH. The catalysts, which were formed in situ from Na(2)[PdCl(4)], the respective polymeric phosphine, KF/K(3)PO(4), and PhB(OH)(2), efficiently couple aryl chlorides at 80 degrees C at 0.5 mol % loading, resulting in a >90 % yield of the respective biphenyl derivatives. The use of polar phase tags allows the efficient recovery of palladium-phosphine catalysts by simple phase separation of the catalyst-containing DMSO solution and the product-containing n-heptane phase. The high activity (TOF) of the catalyst remains almost constant over more than five reaction cycles, which involve the catalytic reaction, separation of the product phase from the catalyst phase, and addition of new reactants to initiate the next cycle. The Buchwald type biphenyl phosphines form the most active Pd catalysts, which are 1.3-2.8 times more active than catalysts derived from diadamantyl-benzylphosphine, but appear to be less robust in the recycling experiments. There is no apparent leaching of the catalyst into the heptane solution (<0.05 %), as evidenced by spectrophotometric measurements, and contamination of the product with Pd is avoided.     

Palladium-catalyzed formylation of aryl bromides: elucidation of the catalytic cycle of an industrially applied coupling reaction

The first comprehensive study of the catalytic cycle of the palladium-catalyzed formylation of aryl bromides with synthesis gas (CO/H2, 1:1) is presented. The formylation in the presence of efficient (Pd/PR2(n)Bu, R = 1-Ad, (t)Bu) and nonefficient (Pd/P(t)Bu3) catalysts was investigated. The main organometallic complexes involved in the catalytic cycle were synthesized and characterized, and their solution chemistry was studied in detail. Comparison of stoichiometric and catalytic reactions using P(1-Ad)2(n)Bu, the most efficient ligand known for the formylation of aryl halides, led to two pivotal results: (1) The corresponding carbonylpalladium(0) complex [Pd(n)(CO)(m)L(n)] and the respective hydrobromide complex [Pd(Br)(H)L2] are resting states of the active catalyst, and they are not directly involved in the catalytic cycle. These complexes maintain the concentration of most active [PdL] species at a low level throughout the reaction, making oxidative addition the rate-determining step, and provide high catalyst longevity. (2) The product-forming step proceeds via base-mediated hydrogenolysis of the corresponding acyl complex, e.g., [Pd(Br)(p-CF3C6H4CO){P(1-Ad)2(n)Bu}]2 (8), under mild conditions (25-50 degrees C, 5 bar). Stoichiometric studies using the less efficient Pd/P(t)Bu3 catalyst resulted in the isolation and characterization of the first stable three-coordinated neutral acylpalladium complex, [Pd(Br)(p-CF3C6H4CO)(P(t)Bu3)] (10). Hydrogenolysis of 10 needed significantly more drastic conditions compared to that of dimeric 8. In the presence of amine base, complex 10 gave a catalytically inactive diamino acyl complex, which explains the low activity of the Pd/P(t)Bu3 catalyst formylation of aryl bromides.     

Mononuclear and dinuclear palladium and nickel complexes of phosphinimine-based tridentate ligands

The tridentate bis-phosphinimine ligands O(1,2-C(6)H(4)N=PPh(3))(2)1, HN(1,2-C(2)H(4)N=PR(3))(2) (R = Ph 2, iPr 3), MeN(1,2-C(2)H(4)N=PPh(3))(2)4 and HN(1,2-C(6)H(4)N=PPh(3))(2)5 were prepared. Employing these ligands, monometallic Pd and Ni complexes O(1,2-C(6)H(4)N=PPh(3))(2)PdCl(2)6, RN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][Cl] (R = H 7, Me 8), [HN(1,2-CH(2)CH(2)N=PiPr(3))(2)PdCl][Cl] 9, [MeN(1,2-CH(2)CH(2)N=PPh(3))(2)PdCl][PF(6)] 10, [HN(1,2-CH(2)CH(2)N=PPh(3))(2)NiCl(2)] 11, [HN(1,2-CH(2)CH(2)N=PR(3))(2)NiCl][X] (X = Cl, R = iPr 12, X = PF(6), R = Ph 13, iPr 14), and [HN(1,2-C(6)H(4)N=PPh(3))(2)Ni(MeCN)(2)][BF(4)]Cl 15 were prepared and characterized. While the ether-bis-phosphinimine ligand 1 acts in a bidentate fashion to Pd, the amine-bis-phosphinimine ligands 2-5 act in a tridentate fashion, yielding monometallic complexes of varying geometries. In contrast, initial reaction of the amine-bis-phosphinimine ligands with base followed by treatment with NiCl(2)(DME), afforded the amide-bridged bimetallic complexes N(1,2-CH(2)CH(2)N=PR(3))(2)Ni(2)Cl(3) (R = Ph 16, iPr 17) and N(1,2-C(6)H(4)N=PPh(3))(2)Ni(2)Cl(3)18. The precise nature of a number of these complexes were crystallographically characterized.     

Cp2Fe(PR2)2PdCl2 (R = i-Pr, t-Bu) complexes as air-stable catalysts for challenging Suzuki coupling reactions

[reaction: see text] The use of Cp(2)Fe(PR(2))(2)PdCl(2) (R = i-Pr and t-Bu) in Suzuki coupling reactions were illustrated using a high throughput screening approach. The di-tbpfPdCl(2) catalyst was shown to be the more active catalyst for unactivated and sterically challenging aryl chlorides. Comparison studies using the commercial catalysts dppfPdCl(2), (Ph(3)P)(2)PdCl(2), (Cy(3)P)(2)PdCl(2), DPEPhosPdCl(2), dppbPdCl(2), dppePdCl(2), Pd(t-Bu(3)P)(2), and [Pd(mu-Br)(t-Bu(3)P)](2) were also done for selected cases to demonstrate the superior activities of di-tbpfPdCl(2) and di-isoppfPdCl(2).     

Highly active palladium catalysts supported by bulky proazaphosphatrane ligands for Stille cross-coupling: coupling of aryl and vinyl chlorides, room temperature coupling of aryl bromides, coupling of aryl triflates, and synthesis of sterically hindered biaryls

A family of proazaphosphatrane ligands [P(RNCH2CH2)2N(R'NCH2CH2): R = R' = i-Bu, 1; R = Bz, R' = i-Bu, 3; R = R' = Bz, 4] for palladium-catalyzed Stille reactions of aryl chlorides is described. Catalysts derived from ligands 1 and 4 efficiently catalyze the coupling of electronically diverse aryl chlorides with an array of organotin reagents. The catalyst system based on the ligand 3 is active for the synthesis of sterically hindered biaryls (di-, tri-, and tetra-ortho substituted). The use of ligand 4 allows room-temperature coupling of aryl bromides and it also permits aryl triflates and vinyl chlorides to participate in Stille coupling.     

Catalytic P--H activation by Ti and Zr catalysts

Catalytic dehydrocoupling of phosphines was investigated using the anionic zirconocene trihydride salts [Cp*2Zr(mu-H)3Li]3 (1 a) or [Cp*2Zr(mu-H)3K(thf)4] (1 b), and the metallocycles [CpTi(NPtBu3)(CH2)4] (6) and [Cp*M(NPtBu3)(CH2)4] (M=Ti 20, Zr 21) as catalyst precursors. Dehydrocoupling of primary phosphines RPH2 (R=Ph, C6H2Me3, Cy, C10H7) gave both dehydrocoupled dimers RP(H)P(H)R or cyclic oligophosphines (RP)n (n=4, 5) while reaction of tBu3C6H2PH2 gave the phosphaindoline tBu2(Me2CCH2)C6H2PH 9. Stoichiometric reactions of these catalyst precursors with primary phosphines afforded [Cp*2Zr((PR)2)H][K(thf)4] (R=Ph 2, Cy 3, C6H2Me3 4), [Cp*2Zr((PPh)3)H][K(thf)4] (5), [CpTi(NPtBu3)(PPh)3] (7) and [CpTi(NPtBu3)(mu-PHPh)]2 (8), while reaction of 6 with (C6H2tBu3)PH2 in the presence of PMe3 afforded [CpTi(NPtBu3)(PMe3)(P(C6H2tBu3)] (10). The secondary phosphines Ph2PH and (PhHPCH2)2CH2 also undergo dehydrocoupling affording (Ph2P)2 and (PhPCH2)2CH2. The bisphosphines (CH2PH2)2 and C6H4(PH2)2 are dehydrocoupled to give (PCH2CH2PH)2)(12) and (C6H4P(PH))2 (13) while prolonged reaction of 13 gave (C6H4P2)(8) (14). The analogous bisphosphine Me2C6H4(PH)2 (17) was prepared and dehydrocoupling catalysis afforded (Me2C6H2P(PH))2 (18) and subsequently [(Me2C6H2P2)2(mu-Me2C6H2P2)]2 (19). Stoichiometric reactions with these bisphosphines gave [Cp*2Zr(H)(PH)2C6-H4][Li(thf)4] (22), [CpTi(NPtBu3)(PH)2C6H4]2 (23) and [Cp*Ti(NPtBu3)(PH)2C6H4] (24). Mechanistic implications are discussed.     

Arylation of diarylamines catalyzed by Ni(II)-PPh3 system

[reaction: see text]. The cross-coupling of bromomagnesium diarylamides, generated in situ from diarylamines, with aryl bromides or iodides can be effected with a simple NiCl2(PPh3)2-PPh3 catalyst system under relatively mild conditions. This coupling reaction is an inexpensive, convenient, and practical method, functioning as an alternative to the corresponding Pd-catalyzed or Cu-mediated process for the synthesis of triarylamines.     

Negishi cross-coupling reaction catalyzed by an aliphatic, phosphine based pincer complex of palladium. biaryl formation via cationic pincer-type Pd(IV) intermediates

The aliphatic, phosphine-based pincer complex [(C(10)H(13)-1,3-(CH(2)P(Cy(2))(2))Pd(Cl)] (1) is a highly active Negishi catalyst, enable to quantitatively couple various electronically activated, non-activated, deactivated, sterically hindered and functionalized aryl bromides with various diarylzinc reagents within short reaction times and low catalyst loadings. Experimental observations strongly indicate that a molecular mechanism is operative with initial chloride dissociation of 1 and formation of the cationic T-shaped 14e(-) complex [(C(10)H(13)-1,3-(CH(2)P(C(6)H(11))(2))(2))Pd](+) (B), which undergoes oxidative addition of an aryl bromide (Ar'Br) to yield the cationic, penta-coordinated aryl bromide pincer complexes of type [(C(10)H(13)-1,3-(CH(2)P(Cy(2))(2))Pd(Br)(aryl')](+) (C) with the metal center in the oxidation state of +IV and the aryl unit in cis position relative to the aliphatic pincer core. Subsequent transmetalation with Zn(aryl)(2) result in the cationic diaryl pincer complexes of type [(C(10)H(13)-1,3-(CH(2)P(Cy(2))(2))Pd(aryl)(aryl')](+) (D), which reductively eliminate the coupling products, thereby regenerating the catalyst. The neutral square planar aryl pincer complex--a possible key intermediate in the catalytic cycle--was found to be reversibly formed in the reaction mixture but is not involved in the catalytic mechanism. Similarly, palladium nanoparticles as the catalytically active form of 1 could have been excluded.     

Copper-free sonogashira coupling reaction with PdCl2 in water under aerobic conditions

A mild protocol for the copper-free Sonogashira coupling of aryl iodides with terminal acetylenes in water under aerobic conditions has been developed. The use of 1 mol % PdCl(2) in the presence of pyrrolidine allows the coupling reaction to proceed at room temperature or 50 degrees C with good to excellent yields.     

Palladium-Catalyzed Synthesis of 1,3-Dienes from Allenes and Organic Halides

A wide range of aryl and vinylic halides react with 1,1-dimethylallene (2a) and potassium carbonate in the presence of Pd(dba)(2) (dba = dibenzylideneacetone) in N,N-dimethylacetamide (DMA) at temperature 100-120 degrees C to give the corresponding dienes CH(2)C(CH(3))CRCH(2) (3a-o), where R is aryl or vinylic, in good to excellent yields. Higher yields of diene products were obtained for aryl bromides than for the corresponding aryl iodides and chlorides. Under similar reaction conditions, tetramethylallene (2b), 1-methyl-1-phenylallene (2c), 1-methyl-3-phenylallene (2d), and 1-cyclohexylallene (2e) also react with aryl and vinylic halides to give diene products (3p-w). For 2d, both E and Z isomers 3t and 3u of the diene product were observed. For 2e, two regioisomers 3vand 3w were isolated with 3w likely from alkene isomerization of 3v. Various palladium systems were tested for the catalytic activity of diene formation. In addition to Pd(dba)(2)/PPh(3), Pd(OAc)(2)/PPh(3), PdCl(2)(PPh(3))(2), and PdCl(2)(dppe) are also very effective as catalysts for the reaction of 2a with p-bromoacetophenone (1a) to give 3a. Studies on the effect of solvents and bases show that DMA and K(2)CO(3) are the solvent and base that give the highest yield of diene 3a. Possible mechanisms for this catalytic diene formation are proposed.     

Palladium-catalyzed tetrakis(dimethylamino)ethylene-promoted reductive coupling of aryl halides

Tetrakis(dimethylamino)ethylene (TDAE)/cat. PdCl(2)(PhCN)(2)-promoted reductive coupling of aryl bromides having either electron-donating or electron-withdrawing groups on their para- and/or meta-position proceeded smoothly to afford the corresponding biaryls in good to excellent yields. Notably, TDAE is such a mild reductant that easily reducible groups, such as carbonyl and nitro groups, are tolerate. A similar reductive coupling of ortho-substituted aryl bromides did not occur at all. The proper choice of palladium catalysts is essential for the reductive coupling; thus, PdCl(2)(PhCN)(2), PdCl(2)(MeCN)(2), Pd(hfacac)(2), Pd(2)(dba)(3), PdCl(2), and Pd(OAc)(2) were used successively for this reaction, but phosphine-ligated palladium catalysts such as Pd(PPh(3))(4), PdCl(2)(PPh(3))(2), and Pd(dppp) did not promote the reaction. The reductive coupling did not occur with nickel catalysts such as NiBr(2), NiCl(2)(bpy), and Ni(acac)(2). The TDAE/cat. palladium-promoted reductive coupling of aryl halides having electron-withdrawing groups took place more efficiently than that of aryl halides substituted with electron-donating groups. A plausible mechanism of TDAE/cat. palladium-promoted reaction is discussed.     

Polystyrene-supported dicyclohexylphenylphosphine adducts of amine- and phosphite-based palladacycles in the Suzuki coupling of aryl chlorides

The polystyrene-immobilised palladacyclic complexes [Pd(TFA)(kappa2-N,C-C6H4CH2NMe2){P(C6H4-4-PS)Cy2}] and [PdCl(kappa2-P,C-{P(OC6H2-2,4-tBu2)(OC6H3-2,4-tBu2)2}{P(C6H4-4-PS)Cy2}](PS = polystyrene) and the homogeneous analogues [Pd(TFA)(kappa2-N,C-C6H4CH2NMe2)(PPhCy2)] and PdCl(kappa2-P,C-{P(OC6H2-2,4-tBu2)(OC6H3-2,4-tBu2)2}(PPhCy2)] were synthesised and characterised. The X-ray structure of one of the homogeneous analogues, [Pd(TFA)(kappa2-N,C-C6H4CH2NMe2)(PPhCy2)] was determined. All the complexes have been tested and show good activity in the Suzuki coupling of aryl chloride substrates. While the polystyrene-immobilised complexes are not recyclable, they are easily extracted and show low levels of palladium leaching.     

NiCl(2)(dppe)-catalyzed cross-coupling of aryl mesylates, arenesulfonates, and halides with arylboronic acids

An investigation of the NiCl(2)(dppe)-, NiCl(2)(dppb)-, NiCl(2)(dppf)-, NiCl(2)(PCy(3))(2)-, and NiCl(2)(PPh(3))(2)-catalyzed cross-coupling of the previously unreported aryl mesylates, and of aryl arenesulfonates, chlorides, bromides, and iodides containing electron-withdrawing and electron-donating substituents with aryl boronic acids, in the absence of a reducing agent, is reported. NiCl(2)(dppe) was the only catalyst that exhibited high and solvent-independent activity in the two solvents investigated, toluene and dioxane. NiCl(2)(dppe) with an excess of dppe, NiCl(2)(dppe)/dppe, was reactive in the cross-coupling of electron-poor aryl mesylates, tosylates, chlorides, bromides, and iodides. This catalyst was also efficient in the cross-coupling of aryl bromides and iodides containing electron-donating substituents. Most surprisingly, the replacement of the excess dppe from NiCl(2)(dppe)/dppe with excess PPh(3) generated NiCl(2)(dppe)/PPh(3), which was found to be reactive for the cross-coupling of both electron-rich and electron-poor aryl mesylates and chlorides. Therefore, the solvent-independent reactivity of NiCl(2)(dppe) provides an inexpensive and general nickel catalyst for the cross-coupling of aryl mesylates, tosylates, chlorides, bromides, and iodides with aryl boronic acids.     

Palladium-catalyzed cyanomethylation of aryl halides through domino Suzuki coupling-isoxazole fragmentation

A one-pot protocol for the cyanomethylation of aryl halides through a palladium-catalyzed reaction with isoxazole-4-boronic acid pinacol ester was developed. Mechanistically, the reaction proceeds through (1) Suzuki coupling, (2) base-induced fragmentation, and (3) deformylation as shown by characterization of all postulated intermediates. Under optimized conditions (PdCl(2)dppf, KF, DMSO/H(2)O, 130 °C) a broad spectrum of aryl bromides could be converted into arylacetonitriles with up to 88% yield.     

Palladium-catalyzed arylation of malonates and cyanoesters using sterically hindered trialkyl- and ferrocenyldialkylphosphine ligands.

Palladium-catalyzed reactions of aryl bromides and chlorides with two common stabilized carbanions-enolates of dialkyl malonates and alkyl cyanoesters-are reported. An exploration of the scope of these reactions was conducted, and the processes were shown to occur in a general fashion. Using P(t-Bu)(3) (1), the pentaphenylferrocenyl ligand (Ph(5)C(5))Fe(C(5)H(4))P(t-Bu)(2) (2), or the adamantyl ligand (1-Ad)P(t-Bu)(2) (3), reactions of electron-poor and electron-rich, sterically hindered and unhindered aryl bromides and chlorides were shown to react with diethyl malonate, di-tert-butyl malonate, diethyl fluoromalonate, ethyl cyanoacetate, and ethyl phenylcyanoacetate. Although alkyl malonates and ethyl alkylcyanoacetates did not react with aryl halides using these catalysts, the same products were formed conveniently in one pot from diethylmalonate by cross-coupling of an aryl halide in the presence of excess base and subsequent alkylation.     

9-fluorenylphosphines for the Pd-catalyzed sonogashira, suzuki, and Buchwald-Hartwig coupling reactions in organic solvents and water

The lithiation/alkylation of fluorene leads to various 9-alkyl-fluorenes (alkyl=Me, Et, iPr, -Pr, -C18H25) in>95% yields, for which lithiation and reaction with R2PCl (R=Cy, iPr, tBu) generates 9-alkyl, 9-PR2-fluorenes which constitute electron-rich and bulky phosphine ligands. The in-situ-formed palladium-phosphine complexes ([Na2PdCl4], phosphonium salt, base, substrates) were tested in the Sonogashira, Suzuki, and Buchwald-Hartwig reactions of aryl chlorides and aryl bromides in organic solvents. The Sonogashira coupling of aryl chlorides at 100-120 degrees C leads to>90% yields with 1 mol% of Pd catalyst. The Suzuki coupling of aryl chlorides typically requires 0.05 mol% of Pd catalyst at 100 degrees C in dioxane for quantitative product formation. To carry out "green" cross-coupling reactions in water, 9-ethylfluorenyldicyclohexylphosphine was reacted in sulphuric acid to generate the respective 2-sulfonated phosphonium salt. The Suzuki coupling of activated aryl chlorides by using this water-soluble catalyst requires only 0.01 mol% of Pd catalyst, while a wide range of aryl chlorides can be quantitatively converted into the respective coupling products by using 0.1-0.5 mol% of catalyst in pure water at 100 degrees C. Difficult substrate combinations, such as naphthylboronic acid or 3-pyridylboronic acid and aryl chlorides are coupled at 100 degrees C by using 0.1-0.5 mol% of catalyst in pure water to obtain the respective N-heterocycles in quantitative yields. The copper-free aqueous Sonogashira coupling of aryl bromides generates the respective tolane derivatives in>95% yield.     

A guide to Sonogashira cross-coupling reactions: the influence of substituents in aryl bromides, acetylenes, and phosphines

The conversion-time data for 168 different Pd/Cu-catalyzed Sonogashira cross-coupling reactions of five arylacetylenes (phenylacetylene; 1-ethynyl-2-ethylbenzene; 1-ethynyl-2,4,6-R(3)-benzene (R = Me, Et, i-Pr)) and Me(3)SiCCH with seven aryl bromides (three 2-R-bromobenzenes (R = Me, Et, i-Pr); 2,6-Me(2)-bromobenzene and three 2,4,6-R(3)-bromobenzenes (R = Me, Et, i-Pr)) with four different phosphines (P-t-Bu(3), t-Bu(2)PCy, t-BuPCy(2), PCy(3)) were determined using quantitative gas chromatography. The stereoelectronic properties of the substituents in the aryl bromides, acetylenes, and phosphines were correlated with the performance in Sonogashira reactions. It was found that the nature of the most active Pd/PR(3) complex for a Sonogashira transformation is primarily determined by the steric bulk of the acetylene; ideal catalysts are: Pd/P-t-Bu(3) or Pd/t-Bu(2)PCy for sterically undemanding phenylacetylene, Pd/t-BuPCy(2) for 2- and 2,6-substituted arylacetylenes or Me(3)SiCCH and Pd/PCy(3) for extremely bulky acetylenes and aryl bromides. Electron-rich and sterically demanding aryl bromides with substituents in the 2- or the 2,6-position require larger amounts of catalyst than 4-substituted aryl bromides. The synthesis of tolanes with bulky groups at one of the two aryl rings is best done by placing the steric bulk at the arylacetylene, which is also the best place for electron-withdrawing substituents.     

Palladium-catalyzed Suzuki-Miyaura cross-coupling reactions of potassium aryl- and heteroaryltrifluoroborates

An extended study of the reactivity of potassium aryl- and heteroaryltrifluoroborates in Suzuki-Miyaura cross-coupling reactions is presented. The coupling of aryl- and electron-rich heteroaryltrifluoroborates with aryl and activated heteroaryl bromides proceeds readily under ligandless conditions. When deactivated aryl- and heteroaryltrifluoroborates are coupled with aryl and heteroaryl bromides and chlorides, a low loading (0.5-2%) of PdCl(2)(dppf).CH(2)Cl(2) efficiently catalyzes the reactions. Under either condition, reactions can generally be carried out in an open atmosphere.     

Efficient Stille cross-coupling reaction using aryl chlorides or bromides in water

An efficient Stille cross-coupling reaction using a variety of aryl halides in neat water has been developed. Employing palladium-phosphinous acid catalyst [(t-Bu)(2)P(OH)](2)PdCl(2) allows formation of biaryls from aryl chlorides and bromides in good to high yields. Functional groups such as ketones and nitriles are tolerated, and organic cosolvents are not required. The air stability and solubility in water of the palladium complexes used in this study facilitate operation of the coupling reaction and product isolation. The feasibility of catalyst recycling has also been demonstrated.     

A new type of tweezer complex involving a rhenium-rhenium multiple bond that enforces an unusual structure in a dipalladium(II) unit

The substitution of the mu-acetato ligands in cis-Re(2)(mu-O(2)CCH(3))(2)Cl(2)(mu-dppm)(2) (1, dppm = Ph(2)PCH(2)PPh(2)) and trans-Re(2)(mu-O(2)CCH(3))(2)Cl(2)(mu-dppE)(2) (2, dppE = Ph(2)PC(=CH(2))PPh(2)) by [4-Ph(2)PC(6)H(4)CO(2)](-) occurs with retention of stereochemistry to give cis-Re(2)(mu-O(2)CC(6)H(4)-4-PPh(2))(2)Cl(2)(mu-dppm)(2) (3) and trans-Re(2)(mu-O(2)CC(6)H(4)-4-PPh(2))(2)Cl(2)(mu-dppE)(2) (6), respectively. The uncoordinated phosphine groups in complexes 3 and 6 have been used to form mixed-metal assemblies with Au(I) and Pd(II), including the Re(2)Pd(2) complex cis-Re(2)(mu-O(2)CC(6)H(4)-4-PPh(2))(2)Cl(2)(mu-dppm)(2)(Pd(2)Cl(4)) (5), in which the planar [(P)ClPd(mu-Cl)(2)PdCl(P)] unit has the unusual cis structure. The crystal structures of 3 and 5 have been determined.