N-heterocyclic carbenes as ligands in high-valent molybdenum and tungsten complexes

Oxometal complexes of molybdenum and tungsten in high oxidation states from stable adducts with 1,3-dimethylimidazoline-2-ylidene (L) 1. The first ‘carbene’ complexes of molybdenum(VI) [MoO₂Cl(L)₃]Cl (3a) and tungsten(VI) WO₂Cl₂(L)₂ (4b) are reported.     

On the reactions of molybdenum and tungsten carbonyls with trimethyl- and triethyl-aluminium

Reactions of hexacarbonylmolybdenum, hexacarbonyltungsten and arene complexes of tricarbonylmolybdenum and tricarbonyltungsten with trimethyl- and triethyl-aluminium have been studied. It has been found, based on IR and NMR spectra, that trialkylaluminium does not form complexes with hexacarbonyls of molybdenum and tungsten. Arene (mesitylene, toluene and benzene) complexes of tricarbonylmolybdenum form 1 : 1 complexes with triethylaluminium, and arene complexes of tricarbonyltungsten form complexes with trimethyl- and triethyl-aluminium. Regardless of the molar ratios of reactants (arene)M(CO)₃/AlEt₃, only one of the three CO groups bonded to molybdenum or tungsten forms a complex with AlEt₃. Fast exchange between free and complexed trialkylaluminium and an exchange of trialkylaluminium between all three carbonyl groups have been observed in benzene, toluene and decalin solutions. In the ¹H NMR spectra of the products of the reactions of (mesitylene)Mo(CO)₃ with AIEt₃ and AIMe₃, signals at –9 to –14ppm (characteristic for molybdenum hydrides) were present. It confirmed an alkylation of molybdenum followed by β- or α-hydrogen elimination with the formation of the corresponding molybdenum hydrides, the actual catalyst of aromatic hydrocarbon hydrogenation.     

Applications analytiques des oxocarbones-II: composition des complexes tungstiques des ions bromanilate et chloranilate: dosage spectrophotometrique du tungstene(VI)

The complexes formed from tungsten(VI) and chloranilate (C(2-)) and bromanilate (B(2-)) have been studied in aqueous solution and as solids, by ultraviolet, visible and infrared spectroscopy. At pH 3-4, the complexes have the composition ligand:tungsten = 2. At pH < 2, only the 1:1 complexes are found. The two reagents allow the spectrophotometric determination of W(VI) (lambda, = 335 nm for H(2)C and 340 nm for H(2)B) in 1.4M HClO(4), at concentrations of about 1 mg/l. The conditional stability constants of the two 1:1 complexes in this medium have been calculated. The tungsten complexes are more stable than the corresponding molybdenum complexes, and the complexes of B(2-) are more stable than the complexes of C(2-) [with W(VI) and Mo(VI)]. It is shown that this result is due to the difference between the pK(1), values of the acids H(2)B and H(2)C. The infrared spectra of the complexes of B(2-) and C(2-) with Mo(VI) and W(VI) are discussed in order to define the interaction between the metal ions and the ligands.     

A new method for the voltammetric determination of molybdenum(VI) using carbon paste electrodes modified in situ with cetyltrimethylammonium bromide

Molybdenum(VI) is determined by anodic stripping voltammetry using a carbon paste electrode modified in situ with cetyltrimethylammonium bromide (CTAB). The preconcentration of molybdenum is performed by adsorption and reduction of ion-pairs of cetyltrimethylammonium and molybdenum(VI) oxalate at a potential of −0.4 V vs. the saturated calomel electrode (SCE). The supporting electrolyte contains 0.01 M oxalic acid and 0.075 mM CTAB. Differential pulse anodic stripping voltammetry exploiting the reoxidation signal is used for the determination of trace levels of molybdenum(VI). Linearity between current and concentration exists for a range of 0.5–500 μg 1⁻¹ Mo with proper preconcentration times; the limit of detection (calculated as 3σ) is 0.04 μg 1⁻¹ with an accumulation period of 10 min.     

Pyrogallol red and bromopyrogallol red in new optical methods for the determination of molybdenum(VI) and tungsten(VI)

The complexation of molybdenum(VI) and tungsten(VI) with pyrogallol red (PR) and bromopyrogallol red (BPR) in the presence of a cationic surfactant, cetylpyridinium bromide was studied. Conditions of the preconcentration of molybdenum(VI) and tungsten(VI) as complexes with PR and BPR on Silochrom S-120 were found. The concentration coefficients were no lower than 67 for a volume of the aqueous phase of 20 mL and a mass of the sorbent of 0.3 g. Chromaticity characteristics of the complexes in solutions and on the sorbent were determined. It was demonstrated that the complex of molybdenum(VI) with BPR in the presence of cetylpyridinium bromide should be used in the analysis of materials with low concentrations of molybdenum.     

Chromatographic separation of vanadium, tungsten and molybdenum with a liquid anion-exchanger

In acidic solution only molybdenum(VI), tungsten(VI), vanadium(V), niobium(V) and tantalum(V) form stable, anionic complexes with dilute hydrogen peroxide. This fact has been used in developing an analytical method of separating molybdenum(VI), tungsten(VI) and vanadium(V) from other metal ions and from each other. Preliminary investigations using reversed-phase paper chromatography and solvent extraction led to a reversed-phase column Chromatographic separation technique. These metal-peroxy anions are retained by a column containing a liquid anion-exchanger (General Mills Aliquat 336) in a solid support. Then molybdenum(VI), tungsten(VI) and vanadium(V) are selectively eluted with aqueous solutions containing dilute hydrogen peroxide and varying concentrations of sulphuric acid.     

Tungsten(VI) and mixed tungsten,molybdenum(VI) complexes of tartaric acid

A number of studies of species formed in the tungsten(VI) oxide-R,R-(+)-tartaric acid-water system have been carried out(^1–3). While various species have been proposed, it is generally accepted that three main ones predominate. Two have tungsten: (+)-tartaric acid [(+)-tartH₄] ratios of 11 and the third has the same ratio of 12. This latter species cannot be that proposed by Avaloset al. ⁽³⁾ since both ligands in their structure would have to be present as unidentates.Recently we have shown⁽⁴⁾ that high resolution¹H and¹³C n.m.r. studies were particularly useful in delineating the complexes formed in aqueous solution in the analogous molybdenum(VI) system. Thus, we turned our attention to the corresponding tungsten(VI) complexes, especially in view of the controversy surrounding the nature of the species formed in aqueous solution with (+)-tartH₄. The results of our studies, presented below, indicate that only a few species are formed, and that these are quite analogous, as might be expected, to the previously described molybdenum(VI) species⁽⁴⁾. In addition we have observed the formation of a mixed dimeric species [MoWO⁴{(+)-tart}₂]^4–, whose structure is akin to the mono-metallic complexes, as well as the well-characterized antimony(III) and arsenic(III) dimers of (+)-tartH₄ ⁽⁵⁾.     

Determination and comparison of stability constants of tungsten(VI) and molybdenum(VI) with nitrilotriacetic acid and glutamic acid at different ionic strengths

The formation constants of species formed in the systems H⁺?+?W(VI)?+?nitrilotriacetic acid (NTA) and H⁺?+?NTA have been determined in aqueous solution for pH?=?4–9 at 25°C and different ionic strengths ranging from 0.1 to 1.0?mol?dm^?3 NaClO₄, using potentiometric and spectrophotometric techniques. It was shown that tungsten(VI) forms a mononuclear 1?:?1 complex with NTA of the type WO₃L^3? at pH?=?7.5. The composition of the complex was determined by the continuous variations method. The complexation of molybdenum(VI) with glutamic acid was investigated in aqueous solution ranging in pH from 4 to 9, using polarimetric, potentiometric and spectrophotometric techniques. The composition of the complex was determined by the continuous variations method. It was shown that molybdenum(VI) forms a mononuclear 1?:?1 complex with glutamic acid of the type MoO₃L^2? at pH?=?6.0. The dissociation constants of glutamic acid and the stability constants of the complex were determined at 25°C and at ionic strengths ranging from 0.1 to 1.0?mol?dm^?3 sodium perchlorate. In both complex formation reactions the dependence of the dissociation and stability constants on ionic strength is described by a Debye-Huckel type equation. Finally, a comparison has been made between the patterns of ionic strength dependence for the two complexes and the results have been compared with data previously reported.     

Synthetic,magnetic, spectral,antimicrobial and antifertility studies of dioxomolybdenum(VI) unsymmetrical imine complexes having a N ∩ N donor system

Unsymmetrical imine molybdenum(VI) complexes of the type [MoO₂(L¹)(L²)] formed by the interaction of dioxobis(2,4-pentanedionato)molybdenum(VI) in a 1:1:1 molar ratio with different imines derived from the reactions of sulphagunanidine, sulphamethazine, sulphapyridine and sulphadiazine with various aromatic aldehydes and ketones, have been prepared and the products characterized by elemental analysis, molar conductance, magnetic measurements and spectral studies. The complexes have also been tested in vitro. The antifertility screening data indicate the antiandrogenic nature of the complexes. The spectral studies suggest that all the ligands behave in a bidentate fashion, coordinating through the azomethine nitrogen (>C=N–) and other functional group NH as (N N) donors. Studies also reveal that the ligands react with dioxobis(2,4-pentanedionato)molybdenum(VI) to give diamagnetic mononuclear molybdenum(VI) complexes.     

Spectrophotometric determination of molybdenum in steels with o-nitrophenylfluorone and cetyltrimethylammonium bromide

A method has been developed for determining microamounts of molybdenum(VI) in aqueous solution by means of the Mo-o-nitrophenylfluorone—cetyltrimethylammonium bromide system, in which micellar solubilization is applied. A red complex is formed in 0.2–0.6M hydrochloric acid medium. The sensitivity of the method is high, and the apparent molar absorptivity is 1.55 × 10⁵ l.mole⁻¹. cm⁻¹. The absorption peak of the complex appears at 530 nm. The colour of the complex develops quickly and is stable for more than 24 hr. The composition of the complex is Mo: o-NPF = 1:1, and the system obeys Beer's law in the range 0–10 μg of Mo per 25 ml. The method has been used for the rapid determination of molybdenum in alloy steels with satisfactory results.     

Catalytic determination of molybdenum(VI) by means of an iodide ion-selective electrode and a landolt-type hydrogen peroxide-iodide reaction

A trace amount of molybdenum(VI) can be determined by using its catalytic effect on the oxidation of iodide to iodine by hydrogen peroxide in acidic medium. Addition of ascorbic acid added to the reaction mixture produces the Landolt effect, i.e., the iodine produced by the indicator reaction is reduced immediately by the ascorbic add. Hence the concentration of iodide begins to decrease once all the ascorbic acid has been consumed. The induction period is measured by monitoring the concentration of iodide ion with an iodide ion-selective electrode. The reciprocal of the induction period varies linearly with the concentration of molybdenum(VI). The most suitable pH and concentrations of hydrogen peroxide and potassium iodide are found to be 1.5, 5 and 10mM, respectively. An appropriate amount of ascorbic acid is added to the reaction mixture according to the concentration of molybdenum(VI) in the sample solution. A calibration graph with good proportionality is obtained for the molybdenum(VI) concentration range from 0.1 to 160 μM. Iron(III), vanadium(IV), zirconium(IV), tungsten(VI), copper(II) and chromium(VI) interfere, but iron(III) and copper(II) can be masked with EDTA.     

Ethylisobutrazine hydrochloride as a selective and sensitive reagent for the spectrophotometric determination of vanadium(V) and its application to vanadium-bearing minerals and alloys

Ethylisobutrazine hydrochloride is proposed as a selective and sensitive reagent for the spectrophotometric determination of vanadium(V). It forms a red-colored species with vanadium(V) in 3.5–6.5 M phosphoric acid medium. An eight-fold molar excess of reagent is necessary for the full development of the color. The red species exhibits an absorption maximum at 518 nm with a molar absorptivity of 9.75 × 10³ liters mol⁻¹ cm⁻¹. Sandell's sensitivity is 5.2 ng cm⁻². Beer's law is obeyed over the range 0.1–6.2 ppm of vanadium(V) with an optimum concentration range of 0.4–6.0 ppm. The effects of acidity, time, temperature, order of addition of reagents, reagent concentration, and the interferences from various ions, are reported. The method has been used successfully for the determination of vanadium in ilmenite and vanadium steels that contain chromium, molybdenum, manganese, nickel, copper, tungsten, and titanium.     

Kinetic-spectrophotometric determination of molybdenum (VI) and tungsten (VI) in mixtures

A simple kinetic-spectrophotometric method is described for the determination of molybdenum(VI) and tungsten(VI) in mixtures, without prior separation. The method is based on the catalytic effect of molybdenum(VI) and tungsten(VI) on the oxidation of 2,4-diaminophenol dihydrochloride (DAP) by hydrogen peroxide in acidic medium. The reaction was followed spectrophotometrically by measuring the rate of change in absorbance with time at 500 nm. A partial inhibition in the catalytic activity of each catalyst, when the other one is present, at all ratios of Mo(VI) W(VI) mixtures studied was observed. On the other hand, the catalytic activity of tungsten(VI) dropped to zero whilst that of molybdenum(VI) decreased slightly, in the presence of citrate ions. Two sets of experiments were carried out, the first in the absence and the other in the presence of citrate, and the resolution of Mo(VI)/W(VI) mixtures was achieved by solving two simultaneous equations. Various molar ratios of Mo(VI) W(VI), at the 10^–6 M level, from 0.2 1 to 5 1 can be determined with satisfactory precision and accuracy. The selectivity of the method was investigated and the method was applied successfully to the determination of molybdenum and tungsten in each other's presence in steel.     

Speciation, liquid-liquid extraction, sequential separation, preconcentration, transport and ICP-AES determination of Cr(III), Mo(VI) and W(VI) with calix-crown hydroxamic acid in high purity grade materials and environmental samples

A new functionalized calix[6]crown hydroxamic acid is reported for the speciation, liquid-liquid extraction, sequential separation and trace determination of Cr(III), Mo(VI) and W(VI). Chromium(III), molybdenum(VI) and tungsten(VI) are extracted at pH 4.5, 1.5 M HCl and 6.0 M HCl, respectively with calixcrown hydroxamic acid (37,38,39,40,41,42-hexahydroxy7,25,31-calix[6]crown hydroxamic acid) in chloroform in presence of large number of cations and anions. The extraction mechanism is investigated. The various extraction parameters, appropriate pH/M HCl, choice of solvent, effect of the reagent concentration, temperature and distribution constant have been studied. The speciation, preconcentration and kinetic of transport has been investigated. The maximum transport is observed 35, 45 and 30 min for chromium(III), molybdenum(VI) and tungsten(IV), respectively. For trace determination the extracts were directly inserted into the plasma for inductively coupled plasma atomic emission spectrometry, ICP-AES, measurements of chromium, molybdenum and tungsten which increase the sensitivity by 30-fold, with detection limits of 3 ng ml⁻¹. The method is applied for the determination of chromium, molybdenum and tungsten in high purity grade ores, biological and environmental samples. The chromium was recovered from the effluent of electroplating industries.     

Separation and concentration of molybdenum(VI) and tungsten(VI) with chelating ion-exchange resins containing sulphur ligands

Three chelating ion-exchange resins based on macroreticular polyacrylonitrile-divinylbenzene copolymers with thioglycollic acid and cysteine as functional groups have been tested for separation of molybdenum(VI) and tungsten(VI). On a short column of the thioglycollic acid resin, molybdenum(VI) and tungsten(VI) can be selectively sorbed from pH-4.3 acetate buffer and eluted with 2M hydrochloric acid and a mixture of 0.1M sodium hydroxide and 0.1M sodium chloride, respectively, with quantitative recovery even at very low concentrations. Simulated sea-water samples have been analysed.     

Extraction of phosphorus(V), molybdenum(VI), and tungsten(VI) from fluoride solutions

The influence of titanim(IV) and silicon(IV) on the extraction of phosphorus(V), molybdenum (VI), and tungsten(VI) fluoride complexes by tributyl phosphate was studied.

     

Kinetics of reduction of transition metal ions by sodium tetrahydroborate. Reduction of molybdenum(VI) and tungsten(VI)

Summary The kinetics of reduction of molybdenum(VI) and tungsten(VI) ions by NaBH₄ in buffered aqueous solution have been investigated. The reaction rate depends upon the first powers of the concentrations of the reactants. The temperature was varied, and the activation parameters were evaluated. Chemical and spectral evidence for the formation of molybdenum(V) and tungsten(V), as the reaction products, is presented. Plausible mechanistic pathways for these reactions are suggested.     

Spectrophotometric determination of molybdenum in the presence of tungsten using gallein and benzyldodecyldimethylammonium bromide

The chemical similarity between molybdenum and tungsten makes the direct spectrophotometric determination of these metals impossible. Usually the determination is preceded by a separation step. In order to find out a selective and quantitative isolation method, coprecipitation with thioacetamide and Cu(II) as a carrier; MnO₂; cupferron, tannin and crystal violet; quinolin-8-ol, tannin and thioacetamide, were examined. Molybdenum(VI) could be determined in the presence of 100-fold mass excess of tungsten after precipitation with thioacetamide and Cu(II). The remaining methods could only be applied if mass excess of W is equal to or lower with respect to Mo. For the resolution of this problem, the derivative spectrophotometry was used. The studies of different order spectra of gallein complexes of molybdenum, tungsten and their mixtures have shown that the fifth-derivative spectra allows one to eliminate the interfering effects of W on the determination of Mo. At 650 nm the spectral features of tungsten is zeroing while the value of the fifth-derivative spectrum of mixture of Mo and W corresponds only to the concentration of molybdenum in the examined solution. Beer’s law is obeyed in the range 0.32–0.80 μg/mL of Mo. The developed derivative spectrophotometric method and the most selective pre-separation method, based on the precipitation of molybdenum(VI) sulphide, were applied to the determination of Mo in Armco iron and steel. The accuracy of the elaborated methods was confirmed by comparison of the determined content of Mo with certified values as well as with the result obtained by the reference ICP-OES technique.     

The use of long-chain alkylamines for preconcentration of traces of molybdenum, tungsten and rhenium in their determination by atomic-absorption spectroscopy-I General studies

Long-chain alkylamines are used for the preconcentration of traces of molybdenum, tungsten and rhenium as thiocyanate complexes, in their determination by atomic-absorption spectroscopy. General studies of factors, influencing the extraction show that the thiocyanate complexes can be extracted into chloroform containing a low concentration of Amberlite LA1. Detection limits are 0.02 ppm Mo, 0.75 ppm W and 0.34 ppm Re in the final MIBK solution and are improved by a factor of 5-10 over those obtained by using current extraction methods. Serious interelement effects are eliminated and a range of other cations and anions are shown to have little effect on the absorption.     

Sorption Purification of Aqueous Ammonium Molybdate To Remove Tungsten Impurities with a Cation Exchanger Containing Pyrocatechol Functional Groups

The sorption of molybdenum(VI) and tungsten(VI) from weakly alkaline and neutral solutions with PK-S cation exchanger containing pyrocatechol functional groups was studied. The possibility of selective recovery of tungsten(VI) impurities from aqueous ammonium molybdate with PK-S resin was examined.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 3, 2005, pp. 425–427.Original Russian Text Copyright © 2005 by Blokhin, Kaloshina, Lyubman, Murashkin.