高压放电-光催化剂体系中低温等离子对g-C_3N_4的影响（英文）

高压放电能产生物理和化学效应,如高能电子(e*)、电场、紫外光、可见光和活性物质(·OH,H·,O·,·O_2~-,O_3,N·,NO_x)等,这些放电效应直接或间接应用于污染物的去除和材料的表面改性.在环境领域中,很多研究都关注于高压放电体系中活性物质的产生和利用,而忽视了物理作用,致使处理污染物的能量利用效率不高.近年来,为了提升能量效率,在放电系统中添加光催化剂的研究越来越多.放电产生的物理和化学效应提升了活性物质的产量,从而增强污染物的去除效率.然而,关于高压放电产生的活性物质和物理效应对光催化剂的影响缺乏研究.g-C_3N_4光催化剂是无毒、耐高温、低成本的非金属半导体,在环境与能源方面应用较广,但至今研究g-C_3N_4与低温等离子体协同处理污染物较少.为了使等离子体-g-C_3N_4系统能在环境中得到应用,首要解决的是高压放电对光催化剂影响的问题,从而为后期的研究奠定基础.本研究选用放电均匀、稳定、能产生高电子密度的介质阻挡放电(DBD)对g-C_3N_4进行处理.在不同电气参数(放电电压和放电时间)对g-C_3N_4进行处理,用处理前后的g-C_3N_4光催化降解10mg/L的亚甲基蓝检测其光催化活性,并对其表面的物理结构和化学特征进行表征.结果发现在低放电电压的长时间放电会降低g-C_3N_4的催化活性,而在高放电电压的较短时间内会增强光催化剂的催化性能,随着放电时间的延长,催化活性会先降低再上升.根据XPS表征结果,放电处理后的g-C_3N_4表面有化学键的破坏和新键的形成.在放电处理过程中,加入光催化剂会增强放电强度,而且亲水官能团(-OH,-COOH,-NO_2)的增加也会使放电强度增强,这与光催化剂对放电间隙的空间电荷吸附量有关.结合g-C_3N_4表面表征结果,发现g-C_3N_4的表面物理结构随着放电时间的延长层层破坏,其表面化学官能团也发生周期性变化,这些变化都会影响g-C_3N_4的光催化剂活性.如果等离子体-g-C_3N_4系统要应用于环境治理,光催化剂需避免与放电间隙接触,使光催化剂既能利用高压放电产生的光和其他物理效应,也能不受到低温等离子体的影响.     

g-C3N4/Ag/TiO2复合材料的构筑及其光催化性能（英文）

以合成的g-C3N4纳米片和Ag/TiO2空心微球为原料,采用机械搅拌的方法构筑了g-C3N4/Ag/TiO2三元复合光催化剂。采用X射线衍射(XRD)、傅里叶变换红外光谱(FT-IR)、扫描电镜(SEM)、X射线光电子能谱(XPS)、紫外-可见光漫反射(UV-Vis DRS)和光致发光光谱(PL)对g-C3N4/Ag/TiO2进行了表征。研究表明,g-C3N4/Ag/TiO2是由Ag/TiO2微球和g-C3N4纳米片复合而成的。与TiO2相比,其可见光响应范围延长,光生载流子的分离速率加快。在室温下,用降解罗丹明B的反应考察了g-C3N4/Ag/TiO2的可见光催化活性。研究表明,光照180 min时,g-C3N4(0.5%)/Ag/TiO2显示了最高的光催化活性(91.9%),分别是TiO2和Ag/TiO2的7.5和1.8倍。光催化活性的提高与合理的异质结构建和Ag的导电性能有关。     

g-C3N4纳米管的制备及其光催化降解性能

以三聚氰胺和碳酸氢铵混合物为原料,采用简便热解法制备g-C₃N₄纳米管。热解过程中碳酸氢铵分解释放出大量的NH₃,能够诱导纳米管的形成。利用X射线衍射（XRD）、扫描电子显微镜（SEM）、红外光谱（IR）、N₂吸附-脱附、紫外-可见漫反射光谱以及紫外可见光谱（UV）等分析测试方法对该光催化剂的微观形貌结构和催化性能进行了表征。以罗丹明光催化降解为模型反应研究了g-C₃N₄纳米管的光催化活性。g-C₃N₄纳米管的表面积明显增大,且能够有效地促进光生电子转移,在可见光下具有较强的光催化性能,降解率在60和120 min时分别能达到95%和99.4%,且循环重复利用5次后降解率不低于92%。     

一锅法制备Co3O4/g-C3N4复合光催化剂及其光催化性能

以三聚氰胺和六水合氯化钴为原料,一锅法制备Co_3O_4负载的多孔石墨相氮化碳(Co_3O_4/g-C_3N_4)复合光催化材料。采用X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、透射电子显微镜(TEM)、紫外-可见漫反射光谱(UV-Vis DRS)、光致发光光谱(PL)等手段对其结构和光学特性进行表征。以盐酸四环素(TC)为目标污染物,评价了不同负载量Co_3O_4/g-C_3N_4复合光催化剂的可见光催化性能。结果表明,所制备的Co_3O_4/g-C_3N_4复合光催化剂为多孔结构,其比表面积较大,并在可见光区域具有显著的吸收。利用原位生成的Co_3O_4纳米粒子在氮化碳表面形成异质结构,可有效转移光生载流子,降低光生电子-空穴的再结合率,从而提高光催化活性。并且存在最佳Co_3O_4复合量,当六水合氯化钴加入量为三聚氰胺的8%(w/w)时,所制备的复合光催化剂CoCN-8具有最佳的光催化性能。在可见光的照射下,60 min内可降解85%的TC,而同样条件下,纯g-C_3N_4仅降解23%的TC。     

Tuning of graphitic carbon nitride (g-C3N4) for photocatalysis: A critical review

Graphitic carbon nitride (g-C₃N₄) is a remarkable semiconductor catalyst that has attracted widespread attention as a visible light photo-responsive, metal-free, low-cost photocatalytic material. Pristine g-C₃N₄ suffers fast recombination of photogenerated electron-hole pairs, low surface area, and insufficient visible light absorption, resulting in low photocatalytic efficiency. This review presents the recent progress, perspectives, and persistent challenges in the development of g-C₃N₄-based photocatalytic materials. Several approaches employed to improve the visible light absorption of the materials including metal and non-metal doping, co-doping, and heterojunction engineering have been extensively discussed. These approaches, in general, were found to decrease the material’s bandgap, increase the surface area, reduce charge carrier recombination, and promote visible light absorption, thereby enhancing the overall photocatalytic performance. The material has been widely used for different applications such as photocatalytic hydrogen production, water splitting, CO₂ conversion, and water purification. The work has also identified various limitations and weaknesses associated with the material that hinders its maximum utilization under visible illumination and presented state-of-the-art solutions that have been reported recently. The summary presented in this review would add an invaluable contribution to photocatalysis research and facilitate the development of efficient visible light-responsive semiconducting materials.     

g-C3N4纳米管的制备及其光催化降解性能

以三聚氰胺和碳酸氢铵混合物为原料,采用简便热解法制备g-C_3N_4纳米管。热解过程中碳酸氢铵分解释放出大量的NH3,能够诱导纳米管的形成。利用X射线衍射(XRD)、扫描电子显微镜(SEM)、红外光谱(IR)、N_2吸附-脱附、紫外-可见漫反射光谱以及紫外可见光谱(UV)等分析测试方法对该光催化剂的微观形貌结构和催化性能进行了表征。以罗丹明光催化降解为模型反应研究了g-C_3N_4纳米管的光催化活性。g-C_3N_4纳米管的表面积明显增大,且能够有效地促进光生电子转移,在可见光下具有较强的光催化性能,降解率在60和120 min时分别能达到95%和99.4%,且循环重复利用5次后降解率不低于92%。     

GO/TiO2-g-C3N4纳米复合材料的制备及可见光催化性能

以水热法制备的20% g-C₃N₄/TiO₂（20%为质量分数）为基,将其与不同质量分数的氧化石墨烯（GO）复合制备出可见光催化性能优良的GO/TiO₂-g-C₃N₄三元复合材料。利用X射线衍射（XRD）、扫描电子显微镜（SEM）、X射线光电子能谱（XPS）、紫外-可见漫反射光谱（UV-Vis DRS）、光致荧光光谱（PL）、瞬态光电流响应等分析测试手段对样品的结构、形貌和光电性能进行表征。研究了不同质量分数GO的加入对GO/TiO₂-g-C₃N₄在可见光下降解亚甲基蓝（MB）溶液的影响。结果表明： g-C₃N₄/TiO₂与GO复合后,锐钛矿相TiO₂颗粒形成小团簇附着在g-C₃N₄和GO片层表面,且当GO含量为15%时,TiO₂形成的团簇最小,对可见光的吸收最多且光生电子-空穴对的复合率最低。可见光照射下,15% GO/TiO₂-g-C₃N₄复合材料对MB的降解率在3 h内可达98.4%,且其降解速率常数（0.022 4 min^-1）分别是纯TiO₂（0.001 5 min^-1）和g-C₃N₄/TiO₂（0.002 5 min^-1）的15倍和9倍。     

氮缺陷石墨相氮化碳的制备及其光催化降解环境有机污染物性能

通过在三聚氰胺热分解过程中加入NaHCO₃制备出具有氮缺陷的石墨相氮化碳（g-C₃N₄）,利用X射线衍射（XRD）、傅里叶变换红外光谱（FT-IR）、N₂吸附-脱附、X射线光电子能谱（XPS）、紫外-可见漫反射光谱（UV-vis DRS）和固体荧光光谱（PL）等方法对其进行表征,并在可见光（λ> 420nm）照射下,以水相中罗丹明B（RhB）的降解为模型反应,研究了该氮缺陷g-C₃N₄对有机污染物降解的光催化活性。结果表明,引入氮缺陷可以提高g-C₃N₄对可见光的吸收以及电子-空穴对的分离效率,进而提高g-C₃N₄的可见光催化活性。催化剂CNK0.005、CNK0.01和CNK0.05在30min内对RhB的降解率分别为79.8%、100.0%和87.6%;而在相同条件下,没有氮缺陷的g-C₃N₄对RhB的降解率仅为59.8%。     

碳纳米管改性g-C3N4提升可见光催化降解性能

以尿素为原料,引入少量的多壁碳纳米管(CNT)改性,采用简便方法制备CNT/g-C_3N_4催化剂。利用扫描电镜(SEM)、透射电镜(TEM)、傅里叶红外光谱仪(FT-IR)、X射线衍射(XRD)、X射线光电子能谱(XPS)、紫外-可见-近红外分光光度计(UV-Vis-NIR Spectrophotometer)、荧光光谱(PL)等手段对CNT/g-C_3N_4催化剂进行表征。结果表明,g-C_3N_4与CNT之间的协同作用,影响了gC_3N_4的能带结构,增强了其对可见光的吸收,改善了光生载流子的分布,提高了电子-空穴对的分离效率。并以罗丹明B(RhB)水溶液模拟废水,在可见光下考察催化剂的光催化降解性能,发现当CNT掺杂量为0.1%(w/w)时效果最佳,降解速率常数是体相g-C_3N_4的3.1倍,且研究发现超氧自由基是该体系下的主要活性物种。     

Two-dimensional g-C3N4 nanosheets-based photo-catalysts for typical sustainable processes

Graphitic carbon nitride (g-C₃N₄) has been widely studied as a visible light responsive photocatalyst in recent years, due to its facile synthesis, low cost, high stability, and appropriate bandgap/band positions. In this review, we firstly introduce and compare various exfoliation approaches of bulk g-C₃N₄ into ultrathin g-C₃N₄ nanosheets. Then, many modification strategies of g-C₃N₄ nanosheets are also reviewed, including heterojunction construction, doping, defect control, and structure design. Thereafter, the charge transfer mechanism in g-C₃N₄ nanosheets based heterojunctions is present, e.g., Z-scheme, S-scheme and other forms. Besides, the photocatalytic applications of g-C₃N₄ nanosheets based photocatalysts are summarized including environmental remediation, energy generation and storage, organic synthesis, and disinfection. This review ends with a summary and some perspectives on the challenges and new directions in exploring g-C₃N₄ nanosheets-based photocatalysts.     

Combination of Ag2CrO4 and AgI semiconductors with g-C3N4: Novel nanocomposites with substantially improved photocatalytic performance under visible light

Novel g-C₃N₄/Ag₂CrO₄/AgI nanocomposites with improved photocatalytic performance under visible light were synthesized by consecutive deposition of Ag₂CrO₄ and AgI semiconductors over g-C₃N₄ sheets by refluxing method. The synthesized g-C₃N₄/Ag₂CrO₄/AgI photocatalysts were fully characterized by XRD, EDX, SEM, TEM, UV–vis DRS, TGA, FT-IR, and PL instruments. Photocatalytic performance of g-C₃N₄/Ag₂CrO₄/AgI (30%) nanocomposite for degradation of RhB was 27.9, 4.0, and 3.1 folds greater than those of the g-C₃N₄, g-C₃N₄/Ag₂CrO₄ (20%), and g-C₃N₄/AgI (30%) photocatalysts, respectively. The substantially increased photocatalytic performance was related to efficient retardation of the charge carriers from recombination and more absorbing of visible light, due to the synergistic effects of Ag₂CrO₄ and AgI on g-C₃N₄. The photocatalytic performance of the ternary nanocomposite did not considerably change after several cycles, indicating that the ternary nanocomposite is stable and it could be reused in successive runs.     

Nanocavity-assisted single-crystalline Ti3+ self-doped blue TiO2(B) as efficient cocatalyst for high selective CO2 photoreduction of g-C3N4

Two-dimensional (2D) graphitic carbon nitride (g-C₃N₄) has invoked significant interest for photocatalytic applications for its excellent features such as high surface area, visible light absorption, and easy transportation of photogenerated charge carriers, but the most reported g-C₃N₄ show relatively low photoactivity due to inferior conductivity and rapid recombination of carriers. These can be overcome by inducing porosity in g-C₃N₄, followed by exfoliation and combining with other materials. Herein, we synthesize nanocavity-assisted oxygen-deficient Ti³⁺ self-doped blue TiO₂(B) nanorods (BT) and integrate them on exfoliated porous g-C₃N₄ (PCN). The synthesized materials are tested for photocatalytic conversion of CO₂ into solar fuels (H₂, CO, and CH₄). The fabricated BT/PCN heterostructures exhibit higher photocatalytic CO₂ conversion activity and 92% CO-evolving selectivity than BT and PCN. The enhancement in activity of BT/PCN can be attributed to the efficient separation and transportation of charge carriers, facilitated by the unique properties of BT, PCN, and their synergistic interactions. We believe that these results can contribute to the improvement of cost-effectiveness, feasibility, and overall performance for real photocatalytic systems.     

Characterization of Visible Light Response N-F Codoped TiO2 Photocatalyst Prepared by Acid Catalyzed Hydrolysis

N-F codoped TiO₂ (TONF) photocatalysts were prepared using acid catalyzed hydrolysis method from mixed aqueous solution of TiCl₄ and NH₄F. The photocatalytic activity of the TONF was evaluated through the degradation of phenol under both visible and UV light irradiation. X-ray photoelectron spectroscopy (XPS), UV-Vis diffuse reflectance spectroscopy (DRS), X-ray diffraction (XRD), scanning electron microscope (SEM), and N₂ adsorption isotherm were used to characterize the obtained powders. The results showed that N-F codoped TiO₂ exhibited significant improvement of visible light catalytic activity. N-F codoping could improve dispersion of TiO₂, inhibit particle size agglomeration, and retard phase transformation. Doped N could extend the light response of TiO₂ to visible light region. In addition, narrower band gap formed by F-doping was beneficial to the high visible light photocatalytic activity.     

g-C3N4-BiOBr复合材料制备及可见光催化性能

利用原位沉积法将BiOBr纳米片生长到g-C₃N₄表面,制得g-C₃N₄-BiOBr p-n型异质结复合光催化剂。采用X射线衍射(XRD)、红外光谱(FTIR)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、紫外可见漫反射(UV-Vis-DRS)和荧光光谱(PL)等测试对光催化剂结构和性能进行表征。通过可见光辐照降解甲基橙水溶液检测评估复合光催化剂光催化活性。研究结果表明:复合光催化剂由BiOBr和g-C₃N₄两相组成,BiOBr纳米片在片状g-C₃N₄表面快速形核生长形成面-面复合结构。相比于纯相g-C₃N₄和BiOBr,g-C₃N₄-BiOBr复合材料具有更强可见光吸收能力,吸收带边红移。在可见光辐照100 min后,性能最佳的2:8 g-C₃N₄-BiOBr复合光催化剂光催化活性分别是纯相g-C₃N₄和BiOBr的1.8和1.2倍,经过4次循环实验后,其降解率仍达84%,说明复合结构光催化剂催化性能和稳定性增强。复合光催化剂的荧光强度显著降低,说明光生载流子复合得到了有效抑制。复合光催化剂催化性能的提高归因于p-n型异质结促进电荷有效分离、抑制电子-空穴复合和吸收光波长范围的扩展,相比单一成分材料具有更好的催化活性和稳定性。自由基捕获实验证明,可见光降解甲基橙光催化过程中的主要活性成分为空穴,并据此提出了可能的光催化机理。     

Fabrication of noble-metal-free NiS<Subscript>2</Subscript>/g-C<Subscript>3</Subscript>N<Subscript>4</Subscript> hybrid photocatalysts with visible light-responsive photocatalytic activities

Nanocomposites of NiS₂ with graphitic carbon nitride (NiS₂/g-C₃N₄) have been successfully synthesized by means of a facile hydrothermal method. The photocatalytic activities of as-prepared samples were evaluated by monitoring the photodecomposition of rhodamine B under visible light irradiation. The experimental results indicated that visible light-driven NiS₂/g-C₃N₄ composites exhibited an enhanced photocatalytic activity compared to that of pure NiS₂, due to the fast generation, separation and transportation of the photogenerated carriers resulting from the addition of NiS₂ nanoparticles (NPs). Interestingly, different amounts of NiS₂ deposition can affect the photocatalytic activities of the NiS₂/g-C₃N₄ composites. A suitable loading amount of NiS₂ NPs presents the best photodegradation performance. The photocatalytic reaction mechanism for the improved photocatalytic performance of NiS₂/g-C₃N₄ catalyst was proposed which was supported by PL, PEC, EIS and active species trapping results. A promising strategy presented here provides a facile route towards the development of economical, noble metal-free composites as photocatalysts for the applications in environmental remediation.     

g-C3N4-BiOBr复合材料制备及可见光催化性能

利用原位沉积法将Bi OBr纳米片生长到g-C_3N_4表面,制得g-C_3N_4-Bi OBr p-n型异质结复合光催化剂。采用X射线衍射(XRD)、红外光谱(FTIR)、场发射扫描电子显微镜(FE-SEM)、透射电子显微镜(TEM)、紫外可见漫反射(UV-Vis-DRS)和荧光光谱(PL)等测试对光催化剂结构和性能进行表征。通过可见光辐照降解甲基橙水溶液检测评估复合光催化剂光催化活性。研究结果表明:复合光催化剂由Bi OBr和g-C_3N_4两相组成,Bi OBr纳米片在片状g-C_3N_4表面快速形核生长形成面-面复合结构。相比于纯相g-C_3N_4和Bi OBr,g-C_3N_4-Bi OBr复合材料具有更强可见光吸收能力,吸收带边红移。在可见光辐照100 min后,性能最佳的2:8 gC_3N_4-Bi OBr复合光催化剂光催化活性分别是纯相g-C_3N_4和Bi OBr的1.8和1.2倍,经过4次循环实验后,其降解率仍达84%,说明复合结构光催化剂催化性能和稳定性增强。复合光催化剂的荧光强度显著降低,说明光生载流子复合得到了有效抑制。复合光催化剂催化性能的提高归因于p-n型异质结促进电荷有效分离、抑制电子-空穴复合和吸收光波长范围的扩展,相比单一成分材料具有更好的催化活性和稳定性。自由基捕获实验证明,可见光降解甲基橙光催化过程中的主要活性成分为空穴,并据此提出了可能的光催化机理。     

Interfacial engineering of graphitic carbon nitride (g-C3N4)-based metal sulfide heterojunction photocatalysts for energy conversion: A review

As one of the most appealing and attractive technologies, photocatalysis is widely used as a promising method to circumvent the environmental and energy problems. Due to its chemical stability and unique physicochemical, graphitic carbon nitride (g-C₃N₄) has become research hotspots in the community. However, g-C₃N₄ photocatalyst still suffers from many problems, resulting in unsatisfactory photocatalytic activity such as low specific surface area, high charge recombination and insufficient visible light utilization. Since 2009, g-C₃N₄-based heterostructures have attracted the attention of scientists worldwide for their greatly enhanced photocatalytic performance. Overall, this review summarizes the recent advances of g-C₃N₄-based nanocomposites modified with transition metal sulfide (TMS), including (1) preparation of pristine g-C₃N₄, (2) modification strategies of g-C₃N₄, (3) design principles of TMS-modified g-C₃N₄ heterostructured photocatalysts, and (4) applications in energy conversion. What is more, the characteristics and transfer mechanisms of each classification of the metal sulfide heterojunction system will be critically reviewed, spanning from the following categories: (1) Type I heterojunction, (2) Type II heterojunction, (3) p-n heterojunction, (4) Schottky junction and (5) Z-scheme heterojunction. Apart from that, the application of g-C₃N₄-based heterostructured photocatalysts in H₂ evolution, CO₂ reduction, N₂ fixation and pollutant degradation will also be systematically presented. Last but not least, this review will conclude with invigorating perspectives, limitations and prospects for further advancing g-C₃N₄-based heterostructured photocatalysts toward practical benefits for a sustainable future.     

Degradation of tetracycline hydrochloride by ultrafine TiO2 nanoparticles modified g-C3N4 heterojunction photocatalyst: Influencing factors,products and mechanism insight

The unique heterojunction photocatalyst of graphite carbon nitride（g-C₃N₄） modified ultrafine TiO₂（gC₃N₄/Ti O₂） was successfully fabricated by electrochemical etching and co-annealing method. However,the effects of various environmental factors on the degradation of TC by g-C₃N₄/Ti O2and the internal reaction mechanism are still unclear. In this study, the effects of initial p H, anions, and cations on the ph...     

A Metal-Organic-Framework-Derived g-C3N4/α-Fe2O3 Hybrid for Enhanced Visible-Light-Driven Photocatalytic Hydrogen Evolution

As one of the most efficient systems for photocatalytic hydrogen evolution, the Z-Scheme system, consisting of different semiconductors with a reversible donor–acceptor pair, has attracted great attention. Considering the non-toxicity and low cost of photocatalysts, a series of g-C₃N₄/α-Fe₂O₃ hybrids were rationally constructed based on the Z-Scheme mechanism for the first time, using a metal-organic framework template approach that can fine tune the compositions and properties of the hybrids. An optimized hybrid, g-C₃N₄/α-Fe₂O₃-2, exhibited prominent photocatalytic water splitting performance with a visible light response. Under irradiation of visible light (λ>420 nm), the hybrid shows a high durability and superior hydrogen production rate of 2066.2 μmol g⁻¹ h⁻¹ from water splitting, which is approximately three times greater than that of bulk g-C₃N₄ because of the effective separation of photo-excited charge carriers by two narrow band gap semiconductors, tightly coupled with the Z-Scheme structural feature.     

静电纺丝制备g-C3N4/C纳米纤维及其可见光降解性能

采用g-C_3N_4纳米片与聚丙烯腈进行静电复合纺丝,再经预氧化和碳化制得g-C_3N_4/C纳米纤维。利用傅立叶变换红外光谱仪(FTIR)、X射线衍射仪(XRD)、拉曼光谱(Raman)和扫描电子显微镜(SEM)对样品结构和形貌进行表征,通过紫外-可见漫反射光谱(UV-Vis DRS)分析可见光响应性。研究表明,复合纳米纤维对罗丹明B表现出较好的可见光降解活性,源于无定形相/石墨相混合结构的碳基体能够降低g-C_3N_4的光生电子-空穴对复合的几率。复合纳米纤维膜在光催化降解搅拌条件下始终能保持完整,经过多次回收和光催化实验,对罗丹明B的光降解率依然较高,表现出较优异的循环利用稳定性。