高锂离子电导的有机-无机复合电解质的渗流结构设计

固态聚合物电解质被认为是解决传统液态锂金属电池安全隐患和循环性能的关键材料,但仍然存在离子电导率低,界面兼容性差等问题。近年来,基于无机填料与聚合物电解质的高锂离子电导的有机-无机复合电解质备受关注。根据渗流理论,有机-无机界面被认为是复合电解质离子电导率改善的主要原因。因此,设计与优化有机-无机渗流界面对提高复合电解质离子电导率具有重要意义。本文从渗流结构的设计出发,综述了不同维度结构的无机填料用于高锂离子电导的有机-无机复合电解质的研究进展,并对比分析了不同渗流结构的优缺点。基于上述评述,展望了有机-无机复合电解质的未来发展趋势和方向。     

聚碳酸酯基固态聚合物电解质的研究进展

液态锂离子电池由于采用易泄露、易挥发、易燃烧的碳酸酯有机溶剂,在高温或极端条件下使用时,存在极大的安全隐患.使用固态电解质替代液态电解液,可以从根本上避免此类安全问题的发生,与此同时还可以大幅度提升固态锂电池的能量密度.固态电解质又分为无机固态电解质和聚合物固态电解质2大类.无机固态电解质能够在宽的温度范围内保持化学稳定性,并且电化学窗口较宽,机械强度更高,室温离子电导率较高,但脆性较大,柔韧性差,制备工艺复杂,成本较高.聚合物固态电解质,室温离子电导率偏低,难以满足室温锂离子电池的应用,但其加工成型容易,形状可变.比较而言,固态聚合物电解质,更适宜大规模生产,离产业化相对更近.固态聚合物电解质中研究较多的是聚醚基固态聚合物电解质(如聚环氧乙烷和聚环氧丙烷),但其缺点是室温离子电导率低,需要对其改性或进一步开发综合性能更加优异的其他固态聚合物电解质.聚碳酸酯基固态聚合物电解质由于其特殊的分子结构(含有强极性碳酸酯基团)以及高介电常数,可以有效减弱阴阳离子间的相互作用,提高载流子数量,从而提高离子电导率,因此被认为是一类非常有前途的固态聚合物电解质体系.基于此,本文重点综述了最近研究热点的聚碳酸酯基固态聚合物电解质,包括聚(三亚甲基碳酸酯)体系、聚(碳酸丙烯酯)体系、聚(碳酸乙烯酯)体系和聚(碳酸亚乙烯酯)体系等,并详细阐述了上述每种聚碳酸酯基固态聚合物电解质的制备、电化学性能、优缺点及改性手段,归纳出其离子配位-解配位过程和离子扩散机制,还对聚碳酸酯基固态聚合物电解质的未来发展方向和研究趋势望进行了预测和展望.     

A Gel Polymer Electrolyte with 2D Filler-reinforced for Dendrite Suppression Li-Ion Batteries

Gel polymer electrolytes (GPEs) incorporate both the high ionic conductivity of organic liquid electrolyte and the high safety performance of all-solid-state electrolytes (ASSEs), greatly improving the electrochemical performance of solid polymer electrolytes (SPEs). However, the practical application of GPEs is still limited by inferior interface compatibility, lithium dendrites, etc. Herein, we prepared GPEs based on poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) further co-blended the two-dimensional sheet inorganic filler hectorite and poly(methyl methacrylate) (PMMA) to improve the mechanical and electrochemical properties of the GPEs. When the content of PMMA and hectorite is optimal, this GPEs have an ionic conductivity of 1.06×10⁻³ S cm⁻¹ and outstanding lithium symmetric cells cycle time of more than 3000 h, indicating that the introduction of filler effectively inhibits the growth of lithium dendrites at room temperature. Moreover, the GPEs adopt a relatively simple solution casting method to provide a fresh idea for the synthesis of high-performance GPEs.     

Enhanced electrochemical properties of polyethylene oxide-based composite solid polymer electrolytes with porous inorganic–organic hybrid polyphosphazene nanotubes as fillers

Solid composite polymer electrolytes consisting of polyethylene oxide (PEO), LiClO₄, and porous inorganic–organic hybrid poly (cyclotriphosphazene-co-4, 4′-sulfonyldiphenol) (PZS) nanotubes were prepared using the solvent casting method. Differential scanning calorimetry and scanning electron microscopy were used to determine the characteristics of the composite polymer electrolytes. The ionic conductivity, lithium ion transference number, and electrochemical stability window can be enhanced after the addition of PZS nanotubes. The electrochemical impedance showed that the conductivity was improved significantly. Maximum ionic conductivity values of 1.5 × 10⁻⁵ S cm⁻¹ at ambient temperature and 7.8 × 10⁻⁴ S cm⁻¹ at 80 °C were obtained with 10 wt.% content of PZS nanotubes, and the lithium ion transference number was 0.35. The good electrochemical properties of the solid-state composite polymer electrolytes suggested that the porous inorganic–organic hybrid polyphosphazene nanotubes had a promising use as fillers in SPEs and the PEO₁₀–LiClO₄–PZS nanotube solid composite polymer electrolyte might be used as a candidate material for lithium polymer batteries.     

Novel composite polymer electrolytes based on poly(ether-urethane) network polymer and fumed silicas

Novel composite solid polymer electrolytes (CSPEs) and composite gel polymer electrolytes (CGPEs) have been prepared. CSPE consists of poly(ether-urethane) network polymer (PUN), fumed silicas and LiClO₄. The ionic conductivity of CSPEs can be enhanced nearly 20 times in comparison with the plain system without the addition of fumed silicas and can be above 1×10⁻⁵ S/cm at room temperature. The effects of both kinds of fumed silicas, viz. uSiO₂ with hydrophilic groups at the surface and mSiO₂ with hydrophobic groups at the surface on ionic conductivity were investigated. CGPE comprising of the CSPE and LiClO₄–PC solution with good mechanical strength exhibits ionic conductivity in the order of 10⁻³ S/cm at room temperature and above 3×10⁻⁴ S/cm at low temperature −40 °C.     

Advances in Ordered Architecture Design of Composite Solid Electrolytes for Solid-State Lithium Batteries

Solid electrolyte lithium batteries are the next generation of advanced energy devices. The incorporation of solid electrolytes can significantly improve the safety issue of lithium-ion batteries. Organic-inorganic composite solid electrolytes (CSE) are promising candidates for solid-state batteries, but their application is mainly limited by low ionic conductivity. Many studies have shown that the architecture of ordered inorganic fillers in CSE can act as fast lithium-ion transfer channels by auxiliary means, thus significantly improving the ionic conductivities. This review summarises the recent advances in CSE with different dimensional inorganic fillers. Various effective strategies for the construction of ordered structures in CSE are then presented. The review concludes with an outlook on the future development of CSE. This review aims to provide researchers with an in-depth understanding of how to achieve ordered architectures in CSE for advanced solid state lithium batteries.     

Combination of Organic and Inorganic Electrolytes for Composite Membranes Toward Applicable Solid Lithium Batteries

To meet the demand for long-range electric vehicles with high-energy-density batteries,the solid-state batteries(SSBs)have attracted ever-increasing attention due to their enormous potential in affording the energy density greater than 400 W·h/kg.As the key materials,the solid electrolytes can be classified as inorganic electrolyte and organic electrolyte.The former usually has high ionic conductivity,good stability and mechanical properties,whereas being heavy and brittle.The latter is usually flexible,light and easy to mass produce,nevertheless has poor ionic conductivity and stability.Thus,the combination of the organic and the inorganic electrolytes for the composite membranes has become the inevitable trend to achieve the high energy density and safety of lithium batteries.From the perspective of practical application,this paper discusses how to construct the ideal organic-inorganic composite solid electrolyte with low areal specific resistance,thin texture,wide electrochemical window and high safety for applicable SSBs.Furthermore,the critical challenges and future development directions are prospected for the composite solid electrolytes.     

Novel composite polymer electrolytes based on poly(ether-urethane) network polymer and modified montmorillonite

Novel composite solid polymer electrolytes (CSPEs) and composite gel polymer electrolytes (CGPEs) have been prepared. CSPE consists of poly(ether-urethane) network polymer, which is superior to poly(ethylene oxide) in mechanical stability due to its cross-linked structure, modified montmorillonite (MMMT) and LiClO₄, and CGPE with good mechanical strength comprises of the CSPE and LiClO₄–PC (propylene carbonate) solution. The ionic conductivity can be enhanced after the addition of MMMT, and CGPE exhibits ionic conductivity in the order of 10⁻³ S/cm at room temperature. The temperature dependence of the ionic conductivity of the CSPE follows the Vogel–Tamman–Fulcher (VTF) equation. The effects of MMMT on the interactions in these systems and the possible conduction mechanisms are also discussed.     

Ultraviolet-Cured Semi-Interpenetrating Network Polymer Electrolytes for High-Performance Quasi-Solid-State Lithium Metal Batteries

Solid polymer electrolytes with relatively low ionic conductivity at room temperature and poor mechanical strength greatly restrict their practical applications. Herein, we design semi-interpenetrating network polymer (SNP) electrolyte composed of an ultraviolet-crosslinked polymer network (ethoxylated trimethylolpropane triacrylate), linear polymer chains (polyvinylidene fluoride-co-hexafluoropropylene) and lithium salt solution to satisfy the demand of high ionic conductivity, good mechanical flexibility, and electrochemical stability for lithium metal batteries. The semi-interpenetrating network has a pivotal effect in improving chain relaxation, facilitating the local segmental motion of polymer chains and reducing the polymer crystallinity. Thanks to these advantages, the SNP electrolyte shows a high ionic conductivity (1.12 mS cm⁻¹ at 30 °C), wide electrochemical stability window (4.6 V vs. Li⁺/Li), good bendability and shape versatility. The promoted ion transport combined with suppressed impedance growth during cycling contribute to good cell performance. The assembled quasi-solid-state lithium metal batteries (LiFePO₄/SNP/Li) exhibit good cycling stability and rate capability at room temperature.     

有机-无机复合型聚合物电解质的研究进展

聚合物电解质是现在锂离子电池研究领域的热点，有机－无机复合型聚合物电解质（CSPE）是现在聚合物电解质的研究主流。在聚合物电解质中添加无机添末，特别是纳米材料，大大改善了聚合物电解质的机械性能、离子导电性能以及界面稳定性能。对CSPE性能进行了评价，对在CSPE中添加无机粉末性能改善机理作了概括和探讨，并对CSPE的前景作了展望。     

On the way to high-conductivity single lithium-ion conductors

Solid electrolytes can potentially address three key limitations of the organic electrolytes used in today’s lithium-ion batteries, namely, their flammability, limited electrochemical stability and low cationic transference number. The pioneering works of Wright and Armand, suggesting the use of solid poly(ethylene oxide)-based polymer electrolytes (PE) for lithium batteries, paved the way to the development of solid-state batteries based on PEs. Yet, low cationic mobility–low Li⁺ transference number in polymer materials coupled with sufficiently high room-temperature conductivity remains inaccessible. The current strategies employed for the production of single-ion polymer conductors include designing new lithium salts, bonding of anions with the main polyether chain or incorporating them into the side chains of comb-branched polymers, plasticizing, adding inorganic fillers and anion receptors. Glass and crystalline superionic solids are classical single-ion-conducting electrolytes. However, because of grain boundaries and poor electrode/electrolyte interfacial contacts, achieving electrochemical performance in solid-state batteries comprising polycrystalline inorganic electrolytes, comparable to the existing batteries with liquid electrolytes, is particularly challenging. Quasi-elastic polymer-in-ceramic electrolytes provide good alternatives to the traditional lithium-ion-battery electrolytes and are believed to be the subject of extensive current research. This review provides an account of the advances over the past decade in the development of single-ion-conducting electrolytes and offers some directions and references that may be useful for further investigations.     

Effect of solvated ionic liquids on the ion conducting property of composite membranes for lithium ion batteries

We prepared the polyethylene oxide (PEO)-based composite membrane electrolytes which contained the specialized ionic liquids and the inorganic filler of Li₇La₃Zr₂O₁₂ (LLZO). Mixtures of ionic liquids and tetragonal inorganic fillers were used as additives to prepare composite electrolytes for an application of all solid-state lithium ion batteries (ASLBs). In order to improve the ionic conductivity of composite membranes, we studied the structural change and the electrochemical behaviors as a function of the amounts of solvated ionic liquids (ILs). The addition effect of solvated ILs showed the higher ionic conductivity such as 10^?4 S/cm at 55 °C by reducing the crystalline character of polymer based composite, resulting in the enhanced ion conducting property. The hybrid composite membranes were successfully made in flexible form, and have an excellent thermal and electrochemical stability. Finally, the electrochemical performance of the half-cell was evaluated, and it was confirmed that the ion-conducting characteristics were influenced and controlled by the effect of ILs.     

Enhanced Li+ migration in solid polymer electrolyte driven by anion-containing polymer-chains

Li-ion batteries with solid polymer electrolytes (SPEs) are safer than conventional liquid electrolytes due to the absence of highly flammable liquid electrolytes. However, their performance is limited by the poor Li⁺ transport in SPEs at room temperature. Anion-containing polymer-chains incorporated SPEs (ASPEs) are therefore developed to enhance Li⁺ diffusion kinetics. Herein, we propose a novel and feasible strategy to incorporate the anion-containing polymer-chains, such as lithiated perfluorinated sulfonic acid (PFSA), into polyvinylidene fluoride (PVDF) polymer-based SPEs. The immobile anion groups from the PFSA-chains impede the migration of mobile anion groups dissociated from the Li salt. The transference number is thus raised from ∼0.3 to 0.52 with the introduction of anion-containing polymer-chains into SPEs. The electrostatic repulsion among anion-containing chains also reduces the close chain stacking and brings 159% increase in the ionic conductivity to 0.83 × 10⁻³ S/cm at 30 °C in contrast with the pure PVDF-based SPE. In addition, LiFeO₄/Li batteries with ASPEs exhibit 55% capacity boost at 0.5 C in contrast to the capacity of batteries with pure-PVDF SPEs, and also offer more than 1000 charge/discharge cycles. Our research findings potentially offer a facile strategy to design thermal stable SPEs with superior Li⁺ transport behaviors towards developing high-performance SPEs-based batteries.     

可拉伸聚合物基复合固体电解质研究进展

未来可穿戴电子器件和系统需要柔性电池提供致密、 安全且可靠的电能源保障. 发展兼具可拉伸性和高离子电导率的固体电解质技术是实现全固态锂电池柔性化, 进而满足上述要求的关键之一. 本文综合评述了提升聚合物基复合固体电解质离子传导性能的主要机制和研究进展, 分析了在不同尺度下解耦离子传导和力学承载功能, 进而在弯折、 拉伸等形变工况下维持离子传导性能稳定的策略, 介绍了有助于推动可拉伸聚合物基复合固体电解质研究的几类先进表征技术, 并展望了未来研究工作的重点方向.     

Borate ester plasticizer for PEO-based solid polymer electrolytes

Lithium rechargeable batteries featuring solvent-free highly conductive solid polymer electrolytes (SPEs) will make a dramatic impact on the electric and hybrid-electric vehicles (EV/HEV) industry by eliminating hazards related to the use of liquid electrolytes. In this paper, we report the synthesis and characterization of a star-shaped borate ester plasticizer, which was then incorporated into the poly(ethylene oxide) polymer matrix in different proportions. Significant improvement was observed in conductivity, with the best value of 9.1 × 10⁻⁵ S/cm at 30 °C. These borate ester plasticized SPEs also exhibited excellent thermal and electrochemical stabilities.     

PEO-LITFSI-SiO2-SN System Promotes the Application of Polymer Electrolytes in All-Solid-State Lithium-ion Batteries

All-solid-state polymer lithium-ion batteries are ideal choice for the next generation of rechargeable lithium-ion batteries due to their high energy, safety and flexibility. Among all polymer electrolytes, PEO-based polymer electrolytes have attracted extensive attention because they can dissolve various lithium salts. However, the ionic conductivity of pure PEO-based polymer electrolytes is limited due to high crystallinity and poor segment motion. An inorganic filler SiO₂ nanospheres and a plasticizer Succinonitrile (SN) are introduced into the PEO matrix to improve the crystallization of PEO, promote the formation of amorphous region, and thus improve the movement of PEO chain segment. Herein, a PEO₁₈−LiTFSI−5 %SiO₂−5 %SN composite solid polymer electrolyte (CSPE) was prepared by solution-casting. The high ionic conductivity of the electrolyte was demonstrated at 60 °C up to 3.3×10⁻⁴ S cm⁻¹. Meanwhile, the electrochemical performance of LiFePO₄/CSPE/Li all-solid-state battery was tested, with discharge capacity of 157.5 mAh g⁻¹ at 0.5 C, and capacity retention rate of 99 % after 100 cycles at 60 °C. This system provides a feasible strategy for the development of efficient all-solid-state lithium-ion batteries.     

Enhanced Lithium‐Ion Conductivity of Polymer Electrolytes by Selective Introduction of Hydrogen into the Anion

The anion chemistry of lithium salts plays a pivotal role in dictating the physicochemical and electrochemical performance of solid polymer electrolytes (SPEs), thus affecting the cyclability of all‐solid‐state lithium metal batteries (ASSLMBs). The bis(trifluoromethanesulfonyl)imide anion (TFSI^?) has long been studied as the most promising candidate for SPEs; however, the Li‐ion conductivities of the TFSI‐based SPEs still remain low (Li‐ion transference number: ca. 0.2). In this work, we report new hydrogen‐containing anions, conceived based on theoretical considerations, as an electrolyte salt for SPEs. SPEs comprising hydrogen‐containing anions achieve higher Li‐ion conductivities than TFSI‐based ones, and those anions are electrochemically stable for various kinds of ASSLMBs (Li–LiFePO₄, Li–S, and Li–O₂ batteries). This opens up a new avenue for designing safe and high‐performance ASSLMBs in the future.     

Recent advances in nanostructured composite solid electrolyte

Solid-state lithium batteries (SSLBs) potentially offer safer and higher energy density batteries than traditional Li-ion batteries, but many challenges remain in the development of high-performance SSLBs. For example, solid-state electrolytes with high ionic conductivity are still critically needed. Composite solid electrolytes (CSEs), which are constituted of ceramic fillers dispersed in polymer matrices, may potentially combine the advantages of ceramic and polymer electrolytes and thus have been intensively investigated. Recent works have found that the size, geometry, and dispersion of ceramic ?llers strongly influence the conductivity of CSEs. This review aims at giving a summary of the recent progresses in CSE including the developments in materials as well as mechanistic characterizations. We believe the latest scientific insights will help the researchers in the field to better design CSEs toward the development of high-performance SSLBs.     

锂无机固体电解质*

全固态锂离子二次电池具有更大能量密度和更高的安全使用性能,在未来的电动汽车和蓄能电站上有很好的应用前景。本文对一些典型的锂无机固体电解质进行分类讨论,对它们的性能、结构和导电机理进行评述。这些固体电解质具有较高的离子导电率,是目前的研究热点。文章总结了影响其导电率的几个重要因素以及作为理想锂无机固体电解质的几个基本要求。     

“Series and parallel” design of ether linkage and imidazolium cation synergistically regulated four-armed polymerized ionic liquid for all-solid-state polymer electrolyte

Developing all-solid-state polymer electrolytes(SPEs) with high electrochemical performances and stability is of great importance for exploiting of high energy density and safe batteries. Herein, ether linkage and imidazolium ionic liquid(ILs) are incorporated into the multi-armed polymer backbone though the series and parallel way. The parallel polymeric ionic liquid(P-P(PEGMA-IM)) maximizes the synergistic effect of ILs and ether linkage, which endowed the material with low crystallinity and h...