Effects of triplet exciton confinement induced by reduced conjugation length in polyspirobifluorene copolymers

Using gated optical spectroscopy at low temperatures, a polyspirobifluorene has been compared with an alternating carbazole-spirobifluorene copolymer in which the backbone conjugation is interrupted due to meta coupling of the carbazole moieties. In the copolymer both singlet and triplet energy levels are blueshifted by 130 meV with respect to the homopolymer, resulting in an unaltered singlet-to-triplet splitting. Though the barrier for triplet exciton migration increases from 4.4 to 6.0 meV for the copolymer compared to the homopolymer, it still remained low enough to ensure efficient triplet diffusion at ambient temperature.     

Evolution of emission manners of organic light-emitting diodes: From emission of singlet exciton to emission of doublet exciton

The emission manners of organic light-emitting diodes(OLEDs) have experienced almost three-decade evolution.In this review,we briefly summarized the emission manners of OLEDs including:(ⅰ) emission from singlet exciton;(ⅱ) emission from triplet exciton;(ⅲ) emission from singlet exciton converted from triplet exciton.Then we introduced a new type of OLEDs with the emission from doublet exciton,wherein organic neutral radicals are used as emitters.Due to the spin-allowed transition of doublet excitons,using neutral radicals as emitters is believed to be a new way to break the 25%upper limit of internal quantum efficiency of OLEDs.The progress of emissive stable neutral radicals is also shortly reviewed.     

Optical absorption and exciton motion in the photosynthetic unit

The influence of dipole-dipole interactions on the optical absorption and exciton motion in the photosynthetic unit is discussed.     

The exciton—phonon interaction for triplet exciton bands of organic solids: An experimental and theoretical study

Very high resolution optical data on the temperature dependences of the Davydov component absorption profiles and polarization dependent one-phonon structures associated with the lowest triplet exciton band of anthracene are presented along with a theoretical framework for their interpretation. The interpretation of the one-particle exciton—phonon transitions involving both one-phonon creation and annihilation (cold and hot phonon transitions) is entirely consistent with the analysis of the T-dependent dephasing of the lowest zero-phonon Davydov transition in terms of two mechanisms: delocalized exciton—delocalized phonon scattering operative for the low frequency (< 30 cm^?) phonons which undergo no lattice distortion and: Raman like phonon scattering operative for the higher frequency phonons which do. It is the latter which leads to the identical T² linewidth dependences of the two Davydov components in the high T limit. The former scattering is dominant at the lowest temperatures. In addition, the, marked and polarization dependent mirror symmetry breakdown between the hot and cold one-particle transitions can be nicely understood in terms of interferences occurring between the Condon and phononic (from the dependence of the pure exciton transition dipoles on phonon coordinate displacement) contributions to the one-particle transition dipoles. It is argued that our findings for anthracene should prove useful for triplet exciton bands in other organic solids.     

Novel polyesteramide-based di- and triblock copolymers: From thermo-mechanical properties to hydrolytic degradation

Two types of biodegradable poly(ε-caprolactone (CLo))-co-poly(ε-caprolactam (CLa)) copolymers were prepared by catalyzed hydrolytic ring-opening polymerization. For the first type of materials, the respective cyclic comonomers were added simultaneously in the reaction medium leading to the formation of copolymers having a random distribution of co-units within the polyesteramide sequence, as evidenced by ¹H and ¹³C NMR. For the second type of copolymers, the cyclic comonomers were added sequentially in the reaction medium yielding diblock polyesteramides, again evidenced by NMR. The thermal and thermo-mechanical properties of the copolymers were investigated by DSC and DMA and correlated with the copolymer topology and composition. The copolymers were characterized by a storage modulus and α transition temperature intermediate to the modulus and T_g of the corresponding homopolymers. The chemical composition and molecular weight of the copolymers proved to have only a limited effect on the thermo-mechanical properties of the materials. The hydrolytic degradation of random copolymers was studied in a phosphate buffer at 60 °C and discussed in terms of chemical composition and molecular weight of the copolymers.     

Formally exact simulations of mesoscale exciton dynamics in molecular materials

Excited state carriers, such as excitons, can diffuse on the 100 nm to micron length scale in molecular materials but only delocalize over short length scales due to coupling between electronic and vibrational degrees-of-freedom. Here, we leverage the locality of excitons to adaptively solve the hierarchy of pure states equations (HOPS). We demonstrate that our adaptive HOPS (adHOPS) methodology provides a formally exact and size-invariant (i.e., ) scaling algorithm for simulating mesoscale quantum dynamics. Finally, we provide proof-of-principle calculations for exciton diffusion on linear chains containing up to 1000 molecules.

The adaptive hierarchy of pure states (adHOPS) algorithm leverages the locality of excitons in molecular materials to perform formally-exact simulations with size-invariant (i.e., ) scaling, enabling efficient simulations of mesoscale exciton dynamics.     

Excited state dynamics in solid and monomeric tetracene: The roles of superradiance and exciton fission

The excited state dynamics in polycrystalline thin films of tetracene are studied using both picosecond fluorescence and femtosecond transient absorption. The solid-state results are compared with those obtained for monomeric tetracene in dilute solution. The room temperature solid-state fluorescence decays are consistent with earlier models that take into account exciton-exciton annihilation and exciton fission but with a reduced delayed fluorescence lifetime, ranging from 20-100 ns as opposed to 2?μs or longer in single crystals. Femtosecond transient absorption measurements on the monomer in solution reveal several excited state absorption features that overlap the ground state bleach and stimulated emission signals. On longer timescales, the initially excited singlet state completely decays due to intersystem crossing, and the triplet state absorption superimposed on the bleach is observed, consistent with earlier flash photolysis experiments. In the solid-state, the transient absorption dynamics are dominated by a negative stimulated emission signal, decaying with a 9.2 ps time constant. The enhanced bleach and stimulated emission signals in the solid are attributed to a superradiant, delocalized S(1) state that rapidly fissions into triplets and can also generate a second superradiant state, most likely a crystal defect, that dominates the picosecond luminescence signal. The enhanced absorption strength of the S(0)→S(1) transition, along with the partially oriented nature of our polycrystalline films, obscures the weaker T(1)→T(N) absorption features. To confirm that triplets are the major species produced by relaxation of the initially excited state, the delayed fluorescence and ground state bleach recovery are compared. Their identical decays are consistent with triplet diffusion and recombination at trapping or defect sites. The results show that complications like exciton delocalization, the presence of luminescent defect sites, and crystallite orientation must be taken into account to fully describe the photophysical behavior of tetracene thin films. The experimental results are consistent with the traditional picture that tetracene's photodynamics are dominated by exciton fission and triplet recombination, but suggest that fission occurs within 10 ps, much more rapidly than previously believed.     

Circulatory bubble dynamics: From physical to biological aspects

Bubbles can form in the body during or after decompression from pressure exposures such as those undergone by scuba divers, astronauts, caisson and tunnel workers. Bubble growth and detachment physics then becomes significant in predicting and controlling the probability of these bubbles causing mechanical problems by blocking vessels, displacing tissues, or inducing an inflammatory cascade if they persist for too long in the body before being dissolved. By contrast to decompression induced bubbles whose site of initial formation and exact composition are debated, there are other instances of bubbles in the bloodstream which are well-defined. Gas emboli unwillingly introduced during surgical procedures and ultrasound microbubbles injected for use as contrast or drug delivery agents are therefore also discussed. After presenting the different ways that bubbles can end up in the human bloodstream, the general mathematical formalism related to the physics of bubble growth and detachment from decompression is reviewed. Bubble behavior in the bloodstream is then discussed, including bubble dissolution in blood, bubble rheology and biological interactions for the different cases of bubble and blood composition considered.     

From solvated electrons to metal anions: Electronic structure and dynamics

The techniques of magnetic susceptibility and magnetic resonance (NMR, ESR) have proved to be invaluable in the study of the electronic structure and dynamics of both paramagnetic and diamagnetic species in solutions of metals in non-aqueous solvents. This paper contains a brief review of recent experimental work in this area, concentrating on localized excess-electron states ranging from solvated electrons, electron-cation encounter species, through finally to gas-like metal anion species existing in these non-aqueous solutions. Throughout, the emphasis is on the information gleaned from magnetic measurements about the microstructure and environment of these matrix-bound states.Session lecture, Ninth International Conference on Non-Aqueous Solutions, Pittsburgh, PA, August 1984.     

Thermoresponsive star triblock copolymers by combination of ROP and ATRP: From micelles to hydrogels

Novel biocompatible, biodegradable, four‐arm star, triblock copolymers containing a hydrophobic poly(ε‐caprolactone) (PCL) segment, a hydrophilic poly(oligo(ethylene oxide)475 methacrylate) (POEOMA475) segment and a thermoresponsive poly(di(ethylene oxide) methyl ether methacrylate) (PMEO₂MA) segment were synthesized by a combination of controlled ring‐opening polymerization (ROP) and atom transfer radical polymerization (ATRP). First, a four‐arm PCL macroinitiator [(PCL‐Br)₄] for ATRP was synthesized by the ROP of ε‐caprolactone (CL) catalyzed by stannous octoate in the presence of pentaerythritol as the tetrafunctional initiator followed by esterification with 2‐bromoisobutyryl bromide. Then, sequential ATRP of oligo(ethylene oxide) methacrylate (OEOMA475, M_n = 475) and di(ethylene oxide) methyl ether methacrylate) (MEO₂MA) were carried out using the (PCL‐Br)₄ tetrafunctional macroinitiator, in different sequence, resulting in preparation of (PCL‐b‐POEOMA475‐b‐PMEO₂MA)₄ and (PCL‐b‐PMEO₂MA‐b‐POEOMA475)₄ star triblock copolymers. These amphiphilic copolymers can self‐assemble into spherical micelles in aqueous solution at room temperature. The thermal responses of the polymeric micelles were investigated by dynamic light scattering and ultraviolet spectrometer. The properties of the two series of copolymers are quite different and depend on the sequence distribution of each block along the arms of the star. The (PCL‐b‐POEOMA475‐b‐PMEO₂MA)₄ star copolymer, with the thermoresponsive PMEO₂MA segment on the periphery, can undergo reversible sol‐gel transitions between room temperature (22 °C) and human body temperature (37 °C). © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Aggregation and protein binding of sodium maleate copolymers with varying hydrophobicities

Copolymers of sodium maleate with methyl methacrylate, styrene, or vinyl acetate have been synthesized and studied in aqueous NaCl solutions of various ionic strengths. The polymers are polyelectrolytes with varying hydrophobicities, and their solution properties have been studied using static and dynamic light scattering. Copolymers containing methyl methacrylate or styrene were shown to aggregate in water upon increasing salt concentration. Copolymers of sodium maleate and vinyl acetate do not associate with increasing ionic strength. The binding of bovine serum albumin and cytochrome C to the sodium maleate copolymers was also investigated by light scattering. It was observed that cytochrome C forms complexes with the copolymers containing methyl methacrylate or vinyl acetate whereas albumin does not bind to any of the copolymers studied. Copyright © 2004 John Wiley & Sons, Ltd.     

Laser pulse control of exciton dynamics in a biological chromophore complex

Femtosecond laser pulse control of exciton dynamics in a biological chromophore complex is studied theoretically. The computations use the optimal control theory specified to open quantum systems and formulated in the framework of the rotating wave approximation. Based on the laser pulse induced formation of an excitonic wave packet the possibility to localize excitation energy at a certain chromophore within a photosynthetic antenna system (FMO complex of green bacteria) is investigated. Details of exciton dynamics driven by a polarization shaped pulse are discussed.     

Alumina interaction with AMPS-MPEG random copolymers III. Effect of PEG segment length on adsorption, electrokinetic and rheological behavior

The effect of different 2-acrylamido-2-methylpropanesulfonic acid sodium salt (AMPS)-methoxypolyethyleneglycol methacrylate (MPEG) comb-like copolymers on the adsorption behavior, electrokinetic and rheological properties of alumina suspensions has been investigated. The change in adsorption isotherms with the content of the two monomers, the medium pH and the ionic strength indicated that the interaction of these copolymers was found to be controlled by both the fraction of ionic groups on the polymer and by the length of the polyethyleneglycol (PEG) segments. Adsorption of the copolymers on alumina particles is accompanied by a shift in the IEP toward acid pH values and may lead to a charge reversal above a certain level. The presence of the PEG segment equally affects the magnitude of the zeta potential by moving the shear plane forward. Addition of the copolymers greatly affects the rheological behavior of the suspension; the viscosity at a defined shear rate decreases and reaches an optimum, which is all the lower as the fraction of the ionic groups is higher. The dispersing effect of the copolymer was controlled by both the ionization level of the copolymer and by the length of the PEG segments.     

Observation of quantum coherence for recurrence motion of exciton in anthracene dimers in solution

The quantum beat signal associated with recurrence motion of exciton was observed for two types of anthracene dimers connected through a phenyl ring, on femtosecond fluorescence anisotropy decay. The time periods of oscillation were 0.3-0.9 ps, which correspond to exciton interactions of 30-50 cm-1, and the damping time constants (dephasing time) were 0.7-1.0 ps. The results show that the coherent aspect in photochemical processes is observable even in solution at room temperature, if one employs dimers of rigid structures.     

Intramolecular fluorescence quenching in luminescent copolymers containing fluorenone and fluorene units: a direct measurement of intrachain exciton hopping rate

The quenching process of fluorescence emission in polyfluorene (PF) due to the presence of intramolecular 9-fluorenone (9 FL) moieties is studied in dilute toluene solution as a function of 9 FL content in eight copolymers containing both fluorene and fluorenone units (PF/FL(x)). The absorption spectrum of PF/FL(x) copolymers clearly shows a new absorption band, redshifted relatively to the PF and 9-fluorenone absorption, which increases in intensity when the fluorenone fraction increases and also decreases with solvent polarity. Fluorescence emission spectra of PF/FL(x) show that this redshifted and unstructured emission does not coincide with the 9-fluorenone emission and, with increasing solvent polarity, it further redshifts and decreases in intensity. An isoemissive point is clearly observed on the fluorescence emission spectra of PF/FL(x) as a function of fluorenone content, showing that the new emission band is formed at the expense of PF. We propose the formation of an intramolecular charge transfer complex (ICTC) between PF units and 9-fluorenone to explain the appearance of the new emission band. Global analysis of time resolved fluorescence decays collected at 415 nm (PF emission) and 580 nm (the ICTC emission) show that three exponentials are generally needed to achieve excellent fits. Two of the components (420 ps and 6.5 ns) are independent of 9-fluorenone fraction. A further fast component is strongly dependent on fluorenone fraction and ranges between 280 and 70 ps. This component appears as a decay time at 415 nm and as a rise time at 580 nm and is ascribed to the migration of exciton to quenching sites (formation of intramolecular CT complex or exciton ionization at CT complex). A kinetic mechanism involving three different kinetic species, quenched PF units kinetically coupled with the ICTC complex, and unquenched PF units is proposed to explain the experimental data and the quenching rate constant is obtained, k(1) congruent with 10(11) s(-1). This is an experimental measurement of the intrachain exciton hopping rate.     

Surface vibrations in alkanethiol self-assembled monolayers of varying chain length

The effect of chain length on the low-energy vibrations of alkanethiol striped phase self-assembled monolayers on Au(111) was studied. We have examined the low-energy vibrational structure of well-ordered, low-density 1-decanethiol (C10), 1-octanethiol (C8), and 1-hexanethiol (C6) to further understand the interaction between adsorbate and substrate. Dispersionless Einstein mode phonons, polarized perpendicularly to the surface, were observed for the striped phases of C10, C8, and C6 at 8.0, 7.3, and 7.3 meV, respectively. An overtone at 12.3 meV was also observed for C6/Au(111). These results, in concert with molecular dynamics simulations, indicate that the forces between the adsorbate and substrate can be described using simple van der Waals forces between the hydrocarbon chains and the Au substrate with the sulfur chemisorbed in the threefold hollow site.     

Boronate-containing copolymers: polyelectrolyte properties and sugar-specific interaction with agarose gel

Copolymers of N-acryloyl-m-aminophenylboronic acid (NAAPBA) with acryamide (AA), N,N-dimethylacrylamide (DMAA), and N-isopropylacrylamide (NIPAM) were found to adsorb on cross-linked agarose gel (Sepharose CL-6B) in the pH range from 7.5-9.2, due to specific boronate-sugar interactions. The molar percentages of phenylboronic acid (PBA) groups in the boronate-containing copolymers (BCCs), as estimated by 1H NMR spectroscopy, were 13, 10, and 16%, respectively, whereas the apparent ionization constants, the pKa values, of the copolymers were similar and equal to 9.0 +/- 0.2 at 20 degrees C. The copolymers adsorption capacities were in the range of 15-30 mg x ml(-1) gel (14-36 micromol pendant PBA ml(-1) gel) at pH 9.2 and decreased with decreasing pH value. The interaction of monomeric NAAPBA with Sepharose CL-6B was characterized by an equilibrium association constant of 53 +/- 17 M(-1), the chromatographic capacity factor k' = 1.8, and a total content of binding sites of 27 +/- 10 micromol x ml(-1) gel at pH 9.2. The weak reversible binding of monomeric NAAPBA and almost irreversible binding of NAAPBA copolymers to the gel at pH 9.2 suggested a multivalent character of the copolymer adsorption. At pH 7.5, the maximal adsorption capacity was displayed by the AA-NAAPBA copolymer (15 mg x ml(-1) gel). All the BCCs could be completely desorbed from the gel by 0.1 M fructose in aqueous buffered media with pH values from 7.5-9.2. The strong adsorption of AA-NAAPBA on agarose gel probably relates to the conformation of the copolymer in aqueous solution and provides opportunities for biomedical applications of the copolymer under physiological conditions. Multivalent, weak-affinity adsorption of BCCs to the agarose gel seems to be a tentative model for the copolymers' binding to oligo- and polysaccharides of cell membranes and mucosal surfaces.     

Synthesis,electrochemical, and optical properties of low band gap homo‐ and copolymers based on squaraine dyes

A broad series of monomeric and polymeric squaraines was synthesized to investigate the impact of electron‐donating bridges, such as unsaturated triarylamine, carbazole, and saturated piperazine groups, on the spectroscopic and redox properties. These bridges were attached to both standard trans‐indolenine squaraines and dicyanomethylene‐substituted cis‐indolenine squaraines. The conjugates were investigated by absorption, steady‐state, and time‐resolved fluorescence spectroscopy and cyclic voltammetry. While addition of the donors resulted in significant redshift of the absorption of the model compounds, hardly any further shift or broadening was observed for the copolymers. Also the redox properties remained nearly unchanged compared with the model dyes. In contrast, immense broadening and redshift was observed for homopolymers. This behavior is explained by mostly excitonic coupling of localized squaraine transitions. The increasing distance of the chromophores determined by the bridges led to a decrease of the exciton coupling energy. We also performed semiempirical CNDO/S2 calculations on AM1 optimized structures. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 890–911     

Computational design of microscopic swimmers and capsules: From directed motion to collective behavior

Systems of motile microscopic particles can exhibit behaviors that resemble those of living microorganisms, including cooperative motion, self-organization, and adaptability to changing environments. Using mesoscale computational modeling, we design synthetic microswimmers and microcapsules that undergo controllable, self-propelled motion in solution. Stimuli-responsive hydrogels are used to actuate the microswimmers and to enable their navigation and chemotaxing behavior. The self-propelled motion of microcapsules on solid surfaces is achieved by the release of encapsulated solutes that alter the surface adhesiveness. These signaling solutes also enable interactions among multiple microcapsules that lead to complex, cooperative behavior. Our findings provide guidelines for creating microscopic devices and machines able to autonomously move and mimic the communication and chemotaxis of biological microorganisms.