Controlled fabrication of one-dimensional polymer nanostructures via metallogel template polymerization

A facile method is reported to controllably fabricate one dimensional(1D) polymer nanostructures via metallogel template polymerization.The metallogel was prepared through coordination interactions between silver ions and a ligand(L) bearing three pyridyl groups in tetrahydrofuran(THF).The diameters of the metallogel nanofibers could be tuned by the gel concentration(GC).Due to its high thermal stability and facility of removal,the metallogel was used as the template for radical polymerization of diacryolyl-2,6-diaminopyridine(DADAP) to form poly-diacryolyl-2,6-diaminopyridine(PDADAP) nanostructures.The gradually eroding of the templates by PDADAP provided us an effective way to fabricate various nanostructures of the polymer.We have demonstrated that different 1D nanostructures,including nanoribbons,nanotubes and nanowires,could be selectively fabricated by adjusting polymerization time,monomer concentration and GC.The rheological properties of the gel samples were tested by a rheometer.As prolonging the reaction time,more and more polymers were formed and the strength of the resulting polymer gels became higher and higher.The simple preparation process,easy controlled microstructures and adequate gel strength would make it a facile synthetic method for different 1D polymer nanosturctures.     

Nucleation-elongation: a mechanism for cooperative supramolecular polymerization

The kinetic and thermodynamic characteristics of polymerizations following a cooperative, nucleation-elongation mechanism are discussed in comparison to those of non-cooperative, isodesmic polymerizations. Nucleation-elongation polymerization is a relatively unexplored avenue of synthetic polymer chemistry and offers some unique and interesting thermodynamic and kinetic attributes not found in the more classical mechanisms of polymer chemistry.     

Controlled synthesis of responsive hydrogel nanostructures via microcontact printing and ATRP

Surfaces that are spatially functionalized with intelligent hydrogels, especially at the micro‐ and nanoscale, are of high interest in the diagnostic and therapeutic fields. Conventional methods of the semiconductor industry have been successfully employed for the patterning of hydrogels for various applications, but methods for fabricating precise 3 D patterns of hydrogels at the micro‐ and nanoscale over material surfaces remain limited. Herein, microcontact printing (µCP) followed by atom transfer radical polymerization (ATRP) was applied as a platform to synthesize temperature responsive poly(N‐isopropylacrylamide) hydrogels with varied network structures (e.g. different molecular weight crosslinkers) over gold surfaces. The XY control of the hydrogels was achieved using µCP, and the Z (thickness) control was achieved using ATRP. The controlled growth and the responsive behavior of hydrogels to temperature stimuli were characterized using Fourier transform infrared (FTIR) spectroscopy and atomic force microscopy (AFM). The results demonstrate that this platform allows for the controlled growth of hydrogel nanostructures using the controlled ATRP mechanism. It is also shown that the molecular weight of the crosslinker affects the rate of hydrogel growth. These PNIPAAm‐based crosslinked hydrogel patterns were also demonstrated to have a temperature‐dependent swelling response. Using this technique, it is possible to synthesize responsive hydrogel patterns over various surfaces for potential applications in the biomedical field. Copyright © 2009 John Wiley & Sons, Ltd.     

One-pot synthesis of polyrotaxanes via acyclic diene metathesis polymerization of supramolecular monomers

A one-pot synthesis of polyrotaxanes has been developed. The method employs a supramolecular monomer comprising a polymerizable ammonium salt and crown ether, in combination with dynamic ADMet polymerization. Ultimately, highly efficient complexation, polymerization, and end-capping were accomplished in a single operation to yield polyrotaxanes with M(w) up to 19.3 kDa and >80% of the repeat units being complexed.     

Controlled synthesis of thermoresponsive polymers derived from L-proline via RAFT polymerization

Well-defined polymers derived from L-proline are synthesized using reversible addition-fragmentation chain transfer (RAFT) polymerization and the amino acid-based polymers exhibit thermosensitive phase separation at lower critical solution temperatures (LCST = 15-45 degrees C) in aqueous medium.     

Photonics of supramolecular nanostructures

The results of studying optical and photochemical properties of organic supramolecular nanostructures capable of self-organizing due to specific intermolecular interactions are generalized in the review. The linear and nonlnear optical properties of supramolecular nanostructures of the guest—host type based on cyclodextrins, intramolecular and intermolecular complexes of crown-containing styryl dyes with metal cations, and aggregates of carbocyanine dyes are described. Photolysis reactions in supramolecular nanostructures, including photoisomerization, photocycloaddition, and formation of excimeric and charge-transfer complexes are presented. A possibility of controlling photochemical transformations in these systems by the light and cations of metal salts is shown.     

Construction of two-dimensional (2D) H-bonded supramolecular nanostructures studied by STM

In this review,a group of two-dimensional（2D） hydrogen-bonded supramolecular networks developed in our laboratory are discussed.Our attention is mainly focused on:（1） recognition of Fe³⁺ through twocomponent molecular networks;（2） site-selective fabrication of 2D fullerene arrays;and（3） fabrication of the nanoporous structure regulated by photoisomerization reaction process.It is envisioned that special supramolecular nanostructures,through H-bonding interactions,can be constructed or reconstructed to be further investigated toward the research of multi-component systems,molecule recognition,single molecular switches,and host-guest supramolecular chemistry.     

Controlled synthesis of semiconductor nanostructures in the liquid phase

The microstructure (composition, size and shape etc.) of semiconductor nanocrystals determine the electronic density of states of semiconductor nanomaterials and ultimately determine their optical and electrical properties. Semiconductor nanocrystal advanced structures, such as hybrid nanostructures and nanocrystal superlattices, not only integrate the function of individual nanocrystals, but also brings the materials collective and synchronic properties. How to control the monodispersity, composition and structure of as-prepared semiconductor nanocrystals during their syntheses, as well as their furthermore assembly, has been a hot research area in this decade. This critical review focuses on the development of synthetic and assembly methods (techniques) of semiconductor nanocrystals processed in the liquid phase. Emphasis is on the synthesis methodology, microstructure related properties of semiconductor nanocrystals, and their applications (243 references).     

Reversible formation of hybrid nanostructures via an organic linkage

A reversible formation of hybrid nanostructures has been successfully achieved via an organic linker containing a cleavable disulfide bond, which provides a general route to the preparation of controllable composite architectures using particles of distinct compositions.     

Controlled synthesis of multiblock copolymers by pseudoliving radical polymerization via the reversible addition-fragmentation chain-transfer mechanism

With the use of two classes of reversible addition-fragmentation chain-transfer agents??dithiobenzoates and trithiocarbonates??multiblock copolymers based on styrene and n-butyl acrylate, which are the best-studied monomers in these processes, are synthesized. It is shown that the polymers containing dithiobenzoate and trithiocarbonate groups are highly efficient for the synthesis of block copolymers, which is independent of the number of stages at which the polymeric RAFT agents are used in polymerization: In all cases, the polymeric RAFT agent is fully consumed in the polymerization of the ??alien?? monomer. The mechanism governing chain formation during the synthesis of multiblock copolymers, that is, the character of monomer insertion into the polymer chain, via one or both ends, is studied. It is found that the order of monomer loading determines the ratio of chains growing through one or two ends. The thermal stability of amphiphilic multiblock copolymers, their solubility in various solvents, and self-organizing ability are investigated.     

Controlled synthesis of polyacrylonitrile via reversible addition-fragmentation chain-transfer pseudoliving radical polymerization and its thermal behavior

The polymerization of acrylonitrile mediated by various trithiocarbonates as reversible addition-fragmentation chain-transfer agents is studied. It is shown that, when polymerization is performed in DMSO, a narrowly dispersed PAN with a controlled molecular mass can be prepared. The pseudoliving radical polymerization of acrylonitrile is conducted for the first time via the reversible addition-fragmentation chaintransfer mechanism in carbon dioxide at an increased pressure. The structure of the polymers is investigated via NMR and IR spectroscopy. As shown by DSC and IR pyrolysis, the thermal behavior of PAN is determined by its molecular mass, the width of the molecular-mass distribution, and the conditions of synthesis. The incorporation of functional groups of the reversible addition-fragmentation chain-transfer agent into a macromolecule changes the structure of the polyconjugated system and makes it possible to control the conditions of its formation.     

Controlled synthesis of CuO nanostructures by a simple solution route

A simple solution route has been developed to prepare nanostructured CuO with Cu(NO₃)₂·3H₂O and NaOH as starting materials. CuO nanoribbons or nanorods and their assemblies into hierarchical structures have been synthesized, respectively, by controlling the molar ratio of NaOH to Cu(NO₃)₂, reaction temperature and the concentration of the starting NaOH solution. Experiments demonstrate that the molar ratio of NaOH to Cu(NO₃)₂ is an important parameter which may decide whether CuO exists in nanoribbons (nanorods) or assemblies into hierarchical structures. Whether Cu(NO₃)₂ is dissolved in ethanol or water also influences the formation of monodispersed CuO nanoribbons (nanorods). The growth mechanism of these nanostructures is discussed. The products were characterized by X-ray diffraction, field-emission scanning electron microscopy and transmission electron microscopy (HRTEM) and their optical absorption spectra were also studied.     

Characterization, supramolecular assembly, and nanostructures of thiophene dendrimers

We report the synthesis and characterization of dendritic thiophene derivatives with their unique supramolecular assembly into 2-D crystals, nanowires, and nanoparticle aggregates. The structure and size of the dendrons and dendrimers have been confirmed with various techniques, such as NMR, SEC, and MALDI-TOF-MS. The mass values were consistent with the mass observed by MALDI-TOF-MS, whereas SEC measurements also gave useful information on the hydrodynamic volume of the individual dendrimers. The interesting electrooptical properties were highlighted by very broad absorption spectra and narrower fluorescence consistent with their electrochemical behavior. The self-organization of the dendrimers on the solid substrate is dependent on the nature of the substrate, preparation methods, and the molecule-molecule and molecule-substrate interactions. Thus, 14T-1 and 30T both formed globular aggregates on mica surface, while 14T-1 also formed nanowires on graphite surface. On the other hand, the larger 30T was observed to form 2-D crystalline structures. By varying the alkyl chain length attached to 14T-1, we were also able to obtain 2-D crystals on graphite. This showed that the different symmetry of packing for 30T and 14T-1 is also dependent on several factors, such as the molecular shape, size, and the presence of noncovalent intermolecular interactions. The results demonstrated the unique ability of thiophene dendrimers to form nanostructures on surfaces.     

Confined supramolecular nanostructures of mesogen-bearing amphiphiles

Stable surface nanostructures with different morphology have been successfully constructed by modifying the chemical structure of synthetic amphiphiles; by introducing mesogenic groups into bolaform amphiphiles, stable spaghetti-like or stripe-like nanostructures can be obtained; it is believed that such a kind of surface structure could be used for templating synthesis and assembly.     

Host-guest supramolecular chemistry at solid-liquid interface: An important strategy for preparing two-dimensional functional nanostructures

Supramolecular self-assembly,an important strategy in nanotechnology,has been widely studied in the past two decades.In this review,we have introduced the recent progress on construction of two-dimensional(2D)nanostructures by host-guest supramolecular chemistry at solid-liquid interface,and the interactions between the host assembly and the guest molecules are the major concerns.At first,the hydrogen bonds connected hybrid structures are discussed.And then we have paid a close attention on the surface-confined condensation reactions that has flourished recently in direct preparing novel nanostructures with increasing structural complexity.In the end,the cavity confinement of the 2D supramolecular host-guest architectures has been studied.On the basis of the above-mentioned interactions,a group of functional hybrid structures have been prepared.Notably,scanning tunneling microscopy(STM),a unique technique to probe the surface morphology and information at the single molecule level,has been used to probe the formed structures on highly oriented pyrolytic graphite(HOPG)surface.     

Copper oxide nanostructures: Controlled synthesis and their catalytic performance

Oval-plate-like, sphere-like, bundle-like and plate-like copper oxide (CuO) nanostructures were prepared by hydrothermal method using Cu(CH₃COO)₂·H₂O and NaOH as the reagents in the absence of any surfactants or templates. The morphology and structure of CuO nanostructures could be easily tailored by adjusting the amount of NaOH. The catalytic activity of the as-prepared CuO nanostructures was demonstrated by catalytic oxidation of methylene blue (MB) in presence of hydrogen peroxide (H₂O₂). The oval-plate-like CuO exhibited better catalytic activity and which was mainly attributed to the larger specific surface area.     

Controlled synthesis of tetragonal terbium orthophosphate nanostructures through a solvothermal route

The tetragonal TbPO₄ was controlled synthesized via a simple solvothermal route by using glycol as solvent. The structures and micromorphologies of the as-synthesized TbPO₄ have been investigated by means of X-ray powder diffraction (XRD) and field-emission scanning electronic microscopy (FE-SEM). The results showed that the tetragonal TbPO₄ are composed of square-like particles about 200 nm in diameter. The photoluminescence spectra exhibited that the emission spectra of the sample could be divided into two parts, representing the ⁵D₄ ?? ⁷F_J (J = 6, 5, 4, 3) transitions and ⁵D₃ ?? ⁷F_J (J = 6, 5, 4, 3) transitions of Tb³⁺.     

Controlled synthesis of 2-D and 3-D dendritic platinum nanostructures

Seeding and autocatalytic reduction of platinum salts in aqueous surfactant solution using ascorbic acid as the reductant leads to remarkable dendritic metal nanostructures. In micellar surfactant solutions, spherical dendritic metal nanostructures are obtained, and the smallest of these nanodendrites resemble assemblies of joined nanoparticles and the nanodendrites are single crystals. With liposomes as the template, dendritic platinum sheets in the form of thin circular disks or solid foamlike nanomaterials can be made. Synthetic control over the morphology of these nanodendrites, nanosheets, and nanostructured foams is realized by using a tin-porphyrin photocatalyst to conveniently and effectively produce a large initial population of catalytic growth centers. The concentration of seed particles determines the ultimate average size and uniformity of these novel two- and three-dimensional platinum nanostructures.     

Controlled microwave heating in modern organic synthesis

Although fire is now rarely used in synthetic chemistry, it was not until Robert Bunsen invented the burner in 1855 that the energy from this heat source could be applied to a reaction vessel in a focused manner. The Bunsen burner was later superseded by the isomantle, oil bath, or hot plate as a source for applying heat to a chemical reaction. In the past few years, heating and driving chemical reactions by microwave energy has been an increasingly popular theme in the scientific community. This nonclassical heating technique is slowly moving from a laboratory curiosity to an established technique that is heavily used in both academia and industry. The efficiency of "microwave flash heating" in dramatically reducing reaction times (from days and hours to minutes and seconds) is just one of the many advantages. This Review highlights recent applications of controlled microwave heating in modern organic synthesis, and discusses some of the underlying phenomena and issues involved.