Silicon Nanocrystals and Silicon‐Polymer Hybrids: Synthesis,Surface Engineering,and Applications

Silicon nanocrystals (Si‐NCs) are emerging as an attractive class of quantum dots owing to the natural abundance of silicon in the Earth's crust, their low toxicity compared to many Group II–VI and III–V based quantum dots, compatibility with the existing semiconductor industry infrastructure, and their unique optoelectronic properties. Despite these favorable qualities, Si‐NCs have not received the same attention as Group II–VI and III–V quantum dots, because of their lower emission quantum yields, difficulties associated with synthesizing monodisperse particles, and oxidative instability. Recent advancements indicate the surface chemistry of Si‐NCs plays a key role in determining many of their properties. This Review summarizes new reports related to engineering Si‐NC surfaces, synthesis of Si‐NC/polymer hybrids, and their applications in sensing, diodes, catalysis, and batteries.     

Hybrid nanocomposites for optical applications

Incorporating inorganic particles into conjugated polymer matrices is an area of current interest in the fields of optoelectronics and solar energy. The hybrid nanocomposites exhibit interesting physical properties thanks to good optical properties of polymers and to high carrier mobility of inorganic semiconductors. A judicious combination of organic/inorganic can therefore provide materials of low cost, ease processing, high stability, with specific electrical and optical properties.In the present study, we briefly review the composite materials that have been successfully utilized in the field of optoelectronics and photovoltaic conversion. We shall describe in particular a family of nanocomposites using polyhedral oligomeric silsesquioxanes (POSS) of general formula (RSiO_3/2)n where R is an organic group as a core. The composites are made by grafting functional polymer groups to the core, which allows the control of their optical properties. Such composites have high mechanical resistance and stability because of the special structure of the core. For illustration, we present a study of polyfluorene (PF)/POSS materials used as an active layer in organic light emitting diodes, with improved performance as compared to those using polymer only, and we discuss the role of the particles in the transport and emission processes in the devices studied.     

A two‐dimensional organic–inorganic hybrid perovskite‐type semiconductor: poly[(2‐azaniumylethyl)trimethylphosphanium [tetra‐μ‐bromido‐plumbate(II)]]

Recently, with the prevalence of `perovskite fever', organic–inorganic hybrid perovskites (OHPs) have attracted intense attention due to their remarkable structural variability and highly tunable properties. In particular, the optical and electrical properties of organic–inorganic hybrid lead halides are typical of the OHP family. Besides, although three‐dimensional hybrid perovskites, such as [CH₃NH₃]PbX₃ (X = Cl, Br or I), have been reported, the development of new organic–inorganic hybrid semiconductors is still an area in urgent need of exploration. Here, an organic–inorganic hybrid lead halide perovskite is reported, namely poly[(2‐azaniumylethyl)trimethylphosphanium [tetra‐μ‐bromido‐plumbate(II)]], {(C₅H₁₆NP)[PbBr₄]}_n, in which an organic cation is embedded in inorganic two‐dimensional (2D) mesh layers to produce a sandwich structure. This unique sandwich 2D hybrid perovskite material shows an indirect band gap of ～2.700 eV. The properties of this compound as a semiconductor are demonstrated by a series of optical characterizations and indicate potential applications for optical devices.     

Inorganic Clusters in Organic Polymers and the Use of Polyfunctional Inorganic Compounds as Polymerization Initiators

Summary.   Silicon oxide or metal oxide clusters or small particles with polymerizable organic groups covalently bonded to their surface can be copolymerized with organic monomers by various polymerization techniques. Whereas the preparation and properties of the polymers reinforced by R ₈Si₈O₁₂ have already been well investigated, analogous materials with incorporated transition metal oxide clusters are only beginning to show their potential as an interesting new class of inorganic-organic hybrid polymers. In the second part of the article, approaches are reviewed in which the inorganic building block serves as an initiator for polymerization reactions. This results in materials in which the organic polymer is grafted from an inorganic core. Most work has been done with surface-modified silica particles. Free radical polymerizations and atom transfer radical polymerizations with macroinitiators are summarized. The latter method results in polymeric particles in which an inorganic core is surrounded by an organic polymer shell. A new approach is the use of polyfunctional inorganic molecules or molecular clusters as initiators. Received July 28, 2000. Accepted August 7, 2000     

Complex inorganic/organic core-shell architectures via an inverse emulsion process

The preparation of complex inorganic/organic core-shell particles and their in situ hydrophobization via an inverse emulsion technique is described here. Typically, aqueous solutions of precursor salts are dispersed with the help of statistical copolymers in an organic phase and subsequently polymer-stabilized nanoparticles precipitate at room temperature (e.g., barium- or strontium-based perovskite nanoparticles). By this technique, core-multiple-shell ZnO–silica–polymer nanoparticles may also be obtained, whereby the polymer matrix is protected against the photocatalytically active ZnO by the silica shell. The particles are characterized by X-ray, transmission electron microscopy, and dynamic light scattering. In this approach, amphiphilic statistical copolymers act not only as stabilizers for inverse emulsions, but they also hydrophobize the remaining complex inorganic particles shelled on the surface after the precipitation. The preparation of hybrid nanoparticles is performed by a one-pot procedure, which makes this process attractive for industrial applications.     

Large impact in electrical properties of polypropylene by improving the filler-matrix interface effect in PP/PS blends

Inorganic nanoparticles are widely used to improve space charge behavior, DC breakdown strength and other electrical properties of polymer insulating materials, but the uniform distribution of inorganic nanofillers in matrix is difficult due to their agglomeration and bad compatibility with the polymeric matrix. In this paper, polypropylene (PP)/polystyrene (PS) blends were prepared to suppress space charge accumulation and improve DC breakdown strength. Polypropylene-g-polystyrene (PP-g-PS) graft copolymer was used as compatibilizer to improve the compatibility of PP matrix and PS filler. The evolution of microstructure of PP/PS blends were investigated by scanning electron microscope (SEM), the space charge distributions were measured by a pulsed electro-acoustic (PEA) system, and DC breakdown strength was also tested. The morphologies show that the size of PS particles reduced to 310 nm when the content of PP-g-PS graft copolymer increased to 24 wt%, and the interaction between PP matrix and PS particles enhanced. The presence of PS particles in all PP/PS blends suppressed the space charge accumulation compared to neat PP, but the DC breakdown strength in uncompatibilized blend was lower than neat PP. The increasing of content of PP-g-PS improved the DC breakdown strength with the maximum value of 408.9 kV/mm was obtained. This may attribute to excellent interface structure formed between PP matrix and PS particles.     

Size, charge, and interactions with giant lipid vesicles of quantum dots coated with an amphiphilic macromolecule

Semiconductor colloidal quantum dots (QDs) are promising fluorescent probes for biology. Initially synthesized in organic solvents, they can be dispersed in aqueous solution by noncovalent coating with amphiphilic macromolecules, which renders the particles hydrophilic and modifies their interactions with other biological compounds. Here, after coating QDs with an alkyl-modified polyacrilic acid, we investigated their colloidal properties in aqueous buffers by electrophoresis, electron microscopy, light scattering, and rate zonal centrifugation. Despite polymer dispersity and variation of the size of the inorganic nanoparticles, the polymer-dot complexes appeared relatively well-defined in terms of hydrodynamic radius and surface charge. Our data show that these complexes contain isolated QD surrounded by a polymer layer with thickness 8-10 nm. We then analyzed their interaction with giant unilamellar vesicles, either neutral or cationic, by optical microscopy. At neutral pH, we found the absence of binding of the coated particles to lipid membrane, irrespective of their lipid composition. An abrupt surface aggregation of the nanoparticles on the lipid membrane was observed in a narrow pH range (6.0-6.2), indicative of critical binding triggered by polymer properties. The overall features of QDs coated with amphiphilic polymers open the route to using these nanoparticles in vivo as optically stable probes with switchable properties.     

Monochelic Versus Telechelic Poly(Methyl Methacrylate) as a Matrix for Photoluminescent Nanocomposites with Quantum Dots

Nanocomposites based on CdSe or CdSe/ZnS quantum dots (QDs) and poly(methyl methacrylate) (PMMA) of different molecular weights and functionality were synthesized by ligand exchange of oleic acid with RAFT-based PMMA. The successful ligand exchange was confirmed by dynamic light scattering in combination with the approach “macromolecules—ghosts” and transmission electron microscopy. Comparative study of mono- and telechelics of PMMA revealed the similarities and differences in their behavior in formation of complexes with QDs and the optical properties of the corresponding nanocomposites. Telechelics exhibited higher efficiency in the complex formation and seemed to be promising candidates for the construction of devices based on QDs and polymer matrix for optical applications.     

Coordination bonding assembly and photophysical properties of Europium organic/inorganic/polymeric hybrid materials

Ternary organic/inorganic/polymeric hybrid material PVP-Eu-(DBM-Si)₃ (DBM = dibenzoylmethane; PVP = poly(4-vinylpyridine)) have been synthesized through the coordination bonds. The precursor DBM-Si is obtained by the modification of DBM molecule with a cross-linking reagent TEPIC (3-(triethoxysilyl)-propyl isocyanate), which is used to form the inorganic Si–O–Si networks with TEOS (tetraethoxysilane) after a hydrolysis and polycondensation process. PVP, which is obtained through the polymerization reaction using 4-vinylpyridine as the monomer in the presence of BPO (benzoyl peroxide), is used to form the organic polymeric C–C chains. For comparison, the binary organic/inorganic hybrid material Eu-(DBM-Si)₃ was also synthesized simultaneously. FT-IR (Fourier-transform infrared spectra), UV (ultraviolet absorption spectra), UV-DR (ultraviolet–visible diffuse reflection absorption spectra), SEM (scanning electron micrograph), PL (photoluminescence spectroscopy) and LDT (luminescence decay time) measurements are used to investigate the physical properties of the obtained hybrid materials. The results reveal that the ternary hybrids presents more regular morphology, higher red/orange ratio, stronger luminescent intensity, higher ⁵D₀ luminescence quantum efficiency and longer lifetime than the binary one, suggesting the property of the overall hybrid system is improved with the introduction of the organic polymer PVP.     

Evaluation of filler particle size within polymer matrix by optical spectroscopy

Polymer composites with inorganic fillers of different nature, concentration, particle size and shape were studied by optical spectroscopy (UV, visible, and IR ranges), optical and electron microscopy, and dynamic light scattering. An experiment to determine the size of the filler particles in aqueous suspension in the polymer matrix of a composite and directly in powders was conducted. It was shown that with increasing concentration aggregation of particles on drying an aqueous slurry occurs to a greater extent than for the filler in the polymer composite. It was demonstrated by examples that the optical spectroscopy can be successfully used for the analysis of sub-micron and micron sized filler particles in a polymer matrix or suspension.     

Hybrid micelle formation from poly(ethylene oxide-b-sodium 2-acrylamido-1-propanesulfonate-b-styrene) and Fe3+ ion in aqueous solution

Organic–inorganic nanohybrid particles are prepared in aqueous solution from poly(ethylene oxide-b-sodium 2-acrylamido-1-propanesulfonate-b-styrene) (PEO-b-PAMPS-b-PS) triblock copolymer and ferric ions. The hybrid micelles were characterized by dynamic light scattering, scanning electron microscopy, transmission electron microscopy, and zeta-potential measurements. The hydrodynamic diameter of the hybrid micelles ranges from 68 to 118 nm depending on the concentration of the polymer and the amount of ferric ions loaded on the polymer. Zeta-potential measurements revealed that the micelles are assembled mainly by electrostatic interaction between the ferric ions and the negatively charged PAMPS block in the PEO-b-PAMPS-b-PS.     

杂化太阳电池中异质结界面的修饰及其对电池光电性能的影响

有机-无机杂化太阳电池综合了有机、无机材料的优点,成本低、理论效率高,受到人们的广泛关注.杂化太阳电池的光活性层由无机半导体和有机共轭聚合物复合而成.当光照射到活性层上时,共轭聚合物吸收光子产生激子(电子-空穴对);激子迁移到有机给体-无机受体的异质结界面处发生解离而产生自由电子和空穴;自由电子和空穴分别向无机半导体和有机聚合物传输,从而实现电荷的分离和传导.激子在有机-无机异质结界面处的分离效率是影响电池性能的一个重要因素.有机、无机两相材料往往因为接触面积小以及相容性差使此两相材料接触不佳,激子迁移到此界面不能有效分离,从而严重影响了杂化太阳电池的效率.这个问题可以通过此界面的修饰加以改善.本文即综述了有机-无机异质结界面修饰的方法、作用和意义,并展望了杂化太阳电池未来的发展趋势和应用前景.     

Molecular and Supramolecular Structures of Triiodides and Polyiodobismuthates of Phenylenediammonium and Its N,N-dimethyl Derivative

Despite remarkable progress in photoconversion efficiency, the toxicity of lead-based hybrid perovskites remains an important issue hindering their applications in consumer optoelectronic devices, such as solar cells, LED displays, and photodetectors. For that reason, lead-free metal halide complexes have attracted great attention as alternative optoelectronic materials. In this work, we demonstrate that reactions of two aromatic diamines with iodine in hydroiodic acid produced phenylenediammonium (PDA) and N,N-dimethyl-phenylenediammonium (DMPDA) triiodides, PDA(I₃)₂⋅2H₂O and DMPDA(I₃)I, respectively. If the source of bismuth was added, they were converted into previously reported PDA(BiI₄)₂⋅I₂ and new (DMPDA)₂(BiI₆)(I₃)⋅2H₂O, having band gaps of 1.45 and 1.7 eV, respectively, which are in the optimal range for efficient solar light absorbers. All four compounds presented organic–inorganic hybrids, whose supramolecular structures were based on a variety of intermolecular forces, including (N)H⋅⋅⋅I and (N)H⋅⋅⋅O hydrogen bonds as well as I⋅⋅⋅I secondary and weak interactions. Details of their molecular and supramolecular structures are discussed based on single-crystal X-ray diffraction data, thermal analysis, and Raman and optical spectroscopy.     

ATP-triggered biomimetic deformations of bioinspired receptor-containing polymer assemblies

Designing synthetic polymer assemblies that can sense a biological signal to mimic cell activities is elusive. We develop a class of block copolymer containing bioinspired host units as supramolecular catchers for the highly-selective capture of adenosine-5′-triphosphate (ATP). Driven by ATP, these block copolymers undergo a stepwise self-assembly and exhibit cascading deformation into highly-ordered nanostructures via the specific recognition effect between ATP and the receptor. By modulating the ATP concentration, one can precisely control the biomimetic evolution of these assemblies in diverse dimensionalities and geometries, like certain organellar deformations. Moreover, the ATP/polymer hybrid aggregates can be reversibly disassembled in response to phosphatase. The special ability of the artificial assemblies to sense intracellular bioactivators can offer new insight into bio-responsive nanomaterials for cellular applications.     

Dynamic modeling of the morphology of multiphase waterborne polymer particles

Multiphase waterborne polymer particles provide advantages in more demanding applications, and their performance depends on particle morphology. Currently, no dynamic model for the prediction of the development of the morphology of multiphase latex particles is available. In this work, a model was developed for the prediction of the dynamic development of the morphology of multiphase waterborne systems, such as polymer–polymer and polymer–polymer–inorganic hybrids.     

Synthesis and properties of colloidal heteronanocrystals

Colloidal heteronanocrystals (HNCs) can be regarded as solution-grown inorganic-organic hybrid nanomaterials, since they consist of inorganic nanoparticles that are coated with a layer of organic ligand molecules. The hybrid nature of these nanostructures provides great flexibility in engineering their physical and chemical properties. The inorganic particles are heterostructured, i.e. they comprise two (or more) different materials joined together, what gives them remarkable and unique properties that can be controlled by the composition, size and shape of each component of the HNC. The interaction between the inorganic component and the organic ligand molecules allows the size and shape of the HNCs to be controlled and gives rise to novel properties. Moreover, the organic surfactant layer opens up the possibility of surface chemistry manipulation, making it possible to tailor a number of properties. These features have turned colloidal HNCs into promising materials for a number of applications, spurring a growing interest on the investigation of their preparation and properties. This critical review provides an overview of recent developments in this rapidly expanding field, with emphasis on semiconductor HNCs (e.g., quantum dots and quantum rods). In addition to defining the state of the art and highlighting the key issues in the field, this review addresses the fundamental physical and chemical principles needed to understand the properties and preparation of colloidal HNCs (283 references).     

A Covalent Organic Framework–Cadmium Sulfide Hybrid as a Prototype Photocatalyst for Visible‐Light‐Driven Hydrogen Production

CdS nanoparticles were deposited on a highly stable, two‐dimensional (2D) covalent organic framework (COF) matrix and the hybrid was tested for photocatalytic hydrogen production. The efficiency of CdS‐COF hybrid was investigated by varying the COF content. On the introduction of just 1 wt % of COF, a dramatic tenfold increase in the overall photocatalytic activity of the hybrid was observed. Among the various hybrids synthesized, that with 10 wt % COF, named CdS‐COF (90:10), was found to exhibit a steep H₂ production amounting to 3678 μmol h^?1 g^?1, which is significantly higher than that of bulk CdS particles (124 μmol h^?1 g^?1). The presence of a π‐conjugated backbone, high surface area, and occurrence of abundant 2D hetero‐interface highlight the usage of COF as an effective support for stabilizing the generated photoelectrons, thereby resulting in an efficient and high photocatalytic activity.     

Hybrid inorganic/organic interpenetrating polymer networks based on zeolite 13x and polystyrene

A hybrid inorganic/organic interpenetrating polymer network (IPN) of a three-dimensional network structure zeolite crystal (13X, powder) and crosslinked or linear polystyrene (PS) was prepared and characterized by differential scanning calorimetry (DSC), solid-state¹³C-NMR, and scanning electron microscopy (SEM). The size and shape of the crystalline zeolite particles were revealed on SEM micrographs in both the pure zeolite and the IPNs. Solubility tests and the results of DSC with solid-state ¹³C-NMR confirm that some organic PS chains are incorporated within the internal three-dimensional channels of the zeolite particles. We speculate that the internal PS chains may adopt an extended “one-dimensional” conformation and exhibit no bulk polymer glass transition. These novel hybrid inorganic/organic IPNs are a new kind of IPN structure. © 1995 John Wiley & Sons, Inc.     

Optical,thermal and microstructural studies of epoxy-CoSO4.7H2O hybrid material

Organic–inorganic polymer hybrid films of epoxy polymer were prepared, using Cobaltous sulfate heptahydrate (CoSO₄.7H₂O) as a filler component, by physical blending method. UV–Vis optical absorption spectra were analyzed to determine optical band gaps (E_g) of the hybrid material. FTIR studies revealed the interaction of inorganic component with molecules of the polymer matrix. Glass transition temperature (T_g) and degradation temperature were determined by DSC. TG analysis showed the improvement in thermal stability of prepared hybrid films. XRD patterns revealed the amorphous nature of the pure epoxy polymer. Additional sharp peaks were seen for higher filler levels (FLs), indicating self formed nanostructures in the material, which was also evident from SEM analysis.     

Gold nanoparticles as structurizing agents for the formation of hybrid nanocomposites

Two types of transparent gold-containing organo-inorganic hybrid gels (polymer nanocomposites) in which gold nanoparticles (nano-Au) are efficient species were synthesized. The stage of hybrid gel formation is preceded by the in situ chemical reduction of chloroauric acid in an aqueous solution of the synthetic linear polymer (polyvinyl alcohol or poly(N-vinylpyrrolidone)) affording a nano-Au. The presence of ultradispersed gold particles in the obtained nanocomposites was confirmed by UV-Vis spectroscopy and electron microscopy. The loss of solubility of the films in water confirms the formation of a gel network. The size of the gold particles and characteristics of the hybrid gel change depending on the molecular weight of the polymer. The interaction of the macromolecules and growing particles mainly determines the diameter and number of particles of the inorganic phase, whereas the content of chloroauric acid affects these parameters to a less extent. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 2, pp. 329–336, February, 2008.