Tubularenes

We report the synthesis and characterization of conjugated, conformationally rigid, and electroactive carbon-based nanotubes that we term tubularenes. These structures are constructed from a resorcin[n_b]arene base. Cyclization of the conjugated aromatic nanotube is achieved in one-pot eight-fold C–C bond formation via Suzuki–Miyaura cross-coupling. DFT calculations indicate a buildup of strain energy in excess of 90 kcal mol⁻¹. The resulting architectures contain large internal void spaces >260 ų, are fluorescent, and able to accept up to 4 electrons. This represents the first scaffolding approach that provides conjugated nanotube architectures.

First scaffolding approach to obtain tubular-shaped contorted aromatic architectures.     

A reconstructed porous copper surface promotes selectivity and efficiency toward C2 products by electrocatalytic CO2 reduction

Electrocatalytic synthesis of multicarbon (C₂₊) products from CO₂ reduction suffers from poor selectivity and low energy efficiency. Herein, a facile oxidation–reduction cycling method is adopted to reconstruct the Cu electrode surface with the help of halide anions. The surface composed of entangled Cu nanowires with hierarchical pores is synthesized in the presence of I⁻, exhibiting a C₂ faradaic efficiency (FE) of 80% at −1.09 V vs. RHE. A partial current density of 21 mA cm⁻² is achieved with a C₂ half-cell power conversion efficiency (PCE) of 39% on this electrode. Such high selective C₂ production is found to mainly originate from CO intermediate enrichment inside hierarchical pores rather than the surface lattice effect of the Cu electrode.

The Cu electrode surface is reconstructed by a halide anion assisted method for promoting CO₂ reduction.     

Transition-metal-mediated reduction and reversible double-cyclization of cyanuric triazide to an asymmetric bitetrazolate involving cleavage of the six-membered aromatic ring

Cyanuric triazide reacts with several transition metal precursors, extruding one equivalent of N₂ and reducing the putative diazidotriazeneylnitrene species by two electrons, which rearranges to N-(1′H-[1,5′-bitetrazol]-5-yl)methanediiminate (biTzI²⁻) dianionic ligand, which ligates the metal and dimerizes, and is isolated from pyridine as [M(biTzI)]₂Py₆ (M = Mn, Fe, Zn, Cu, Ni). Reagent scope, product analysis, and quantum chemical calculations were combined to elucidate the mechanism of formation as a two-electron reduction preceding ligand rearrangement.

Cyanuric triazide reacts with transition metal precursors, extruding N₂ and reducing the ligand by two electrons, which breaks an aromatic ring and rearranges to a bitetrazolylmethanediiminate (biTzI²⁻) ligand, forming two new aromatic rings.     

Enantioselective total synthesis of (−)-myrifabral A and B

A catalytic enantioselective approach to the Myrioneuron alkaloids (−)-myrifabral A and (−)-myrifabral B is described. The synthesis was enabled by a palladium-catalyzed enantioselective allylic alkylation, that generates the C(10) all-carbon quaternary center. A key N-acyl iminium ion cyclization forged the cyclohexane fused tricyclic core, while vinyl boronate cross metathesis and oxidation afforded the lactol ring of (−)-myrifabral A. Adaptation of previously reported conditions allowed for the conversion of (−)-myrifabral A to (−)-myrifabral B.

A catalytic enantioselective approach to the Myrioneuron alkaloids (−)-myrifabral A and (−)-myrifabral B is described.     

Modulation of the superficial electronic structure via metal–support interaction for H2 evolution over Pd catalysts

Electronic interactions can radically enhance the performance of supported metal catalysts and are critical for fundamentally understanding the nature of catalysts. However, at the microscopic level, the details of such interactions tuning the electronic properties of the sites on the metal particle''s surface and metal–support interface remain obscure. Herein, we found polarized electronic metal–support interaction (pEMSI) in oxide-supported Pd nanoparticles (NPs) describing the enhanced accumulation of electrons at the surface of NPs (superficial Pd^δ−) with positive Pd atoms distributed on the interface (interfacial Pd^δ+). More superficial Pd^δ− species mean stronger pEMSI resulting from the synergistic effect of moderate Pd–oxide interaction, high structural fluxionality and electron transport activity of Pd NPs. The surface Pd^δ− species are responsible for improved catalytic performance for H₂ evolution from metal hydrides and formates. These extensive insights into the nature of supported-metal NPs may open new avenues for regulating a metal particle''s electronic structure precisely and exploiting high-performance catalysts.

A new type of electronic effect, polarized metal-support interaction (pEMSI), in oxide-supported Pd nanoparticles describing the enhanced accumulation of electrons at the superficial surface is responsible for improved catalytic H₂ evolution.     

Observations of tetrel bonding between sp3-carbon and THF

We report the direct observation of tetrel bonding interactions between sp³-carbons of the supramolecular synthon 3,3-dimethyl-tetracyanocyclopropane (1) and tetrahydrofuran in the gas and crystalline phase. The intermolecular contact is established via σ-holes and is driven mainly by electrostatic forces. The complex manifests distinct binding geometries when captured in the crystalline phase and in the gas phase. We elucidate these binding trends using complementary gas phase quantum chemical calculations and find a total binding energy of −11.2 kcal mol⁻¹ for the adduct. Our observations pave the way for novel strategies to engineer sp³-C centred non-covalent bonding schemes for supramolecular chemistry.

sp³-C⋯THF tetrel bonding was observed in the crystalline state and in the gas phase. Density functional calculations revealed interaction energies up to −11.2 kcal mol⁻¹ and showed that these adducts are held together mainly by electrostatics.     

Time-resolved luminescence detection of peroxynitrite using a reactivity-based lanthanide probe

Peroxynitrite (ONOO⁻) is a powerful and short-lived oxidant formed in vivo, which can react with most biomolecules directly. To fully understand the roles of ONOO⁻ in cell biology, improved methods for the selective detection and real-time analysis of ONOO⁻ are needed. We present a water-soluble, luminescent europium(iii) probe for the rapid and sensitive detection of peroxynitrite in human serum, living cells and biological matrices. We have utilised the long luminescence lifetime of the probe to measure ONOO⁻ in a time-resolved manner, effectively avoiding the influence of autofluorescence in biological samples. To demonstrate the utility of the Eu(iii) probe, we monitored the production of ONOO⁻ in different cell lines, following treatment with a cold atmospheric plasma device commonly used in the clinic for skin wound treatment.

Reactivity-based europium(iii) probe displays excellent selectivity for peroxynitrite (ONOO⁻), enabling its time-resolved luminescence detection in living cells.     

Silyloxymethanesulfinate as a sulfoxylate equivalent for the modular synthesis of sulfones and sulfonyl derivatives

An efficient protocol for the modular synthesis of sulfones and sulfonyl derivatives has been developed utilizing sodium tert-butyldimethylsilyloxymethanesulfinate (TBSOMS-Na) as a sulfoxylate (SO₂²⁻) equivalent. TBSOMS-Na, easily prepared from the commercial reagents Rongalite™ and TBSCl, serves as a potent nucleophile in S-alkylation and Cu-catalyzed S-arylation reactions with alkyl and aryl electrophiles. The sulfone products thus obtained can undergo the second bond formation at the sulfur center with various electrophiles without a separate unmasking step to afford sulfones and sulfonyl derivatives such as sulfonamides and sulfonyl fluorides.

An efficient protocol for the modular synthesis of sulfones and sulfonyl derivatives has been developed utilizing sodium tert-butyldimethylsilyloxymethanesulfinate (TBSOMS-Na) as a sulfoxylate (SO₂²⁻) equivalent.     

Pinkment: a synthetic platform for the development of fluorescent probes for diagnostic and theranostic applications

Reaction-based fluorescent-probes have proven successful for the visualisation of biological species in various cellular processes. Unfortunately, in order to tailor the design of a fluorescent probe to a specific application (i.e. organelle targeting, material and theranostic applications) often requires extensive synthetic efforts and the synthetic screening of a range of fluorophores to match the required synthetic needs. In this work, we have identified Pinkment-OH as a unique “plug-and-play” synthetic platform that can be used to develop a range of ONOO⁻ responsive fluorescent probes for a variety of applications. These include theranostic-based applications and potential material-based/bioconjugation applications. The as prepared probes displayed an excellent sensitivity and selectivity for ONOO⁻ over other ROS. In vitro studies using HeLa cells and RAW 264.7 macrophages demonstrated their ability to detect exogenously and endogenously produced ONOO⁻. Evaluation in an LPS-induced inflammation mouse model illustrated the ability to monitor ONOO⁻ production in acute inflammation. Lastly, theranostic-based probes enabled the simultaneous evaluation of indomethacin-based therapeutic effects combined with the visualisation of an inflammation biomarker in RAW 264.7 cells.

Pinkment, a resorufin based ONOO⁻ selective and sensitive ‘plug and play’ fluorescence-based platform for in vitro and in vivo use, enables facile functionalisation for various imaging and theranostic applications.     

Thermal expansion properties of organic crystals: a CSD study

The thermal expansion properties of crystalline organic compounds are investigated by data mining of the Cambridge Structural Database (CSD). The mean volumetric thermal expansion coefficient is 168.8 × 10⁻⁶ K⁻¹ and the mean uniaxial thermal expansion coefficient is 71.4 × 10⁻⁶ K⁻¹, based on 745 and 1129 different observations, respectively. Normal and anomalous coefficients can be identified using these values and the associated standard deviations. The anisotropy of the thermal expansion is also evaluated and found to have a very broad distribution. 4719 different structures, comprising 4093 different molecular compounds and 626 additional polymorphs have been analyzed on their thermal expansion properties. Approximately 34% of these structures may have at least one orthogonal axis with negative thermal expansion, much more than generally believed. Moreover 127 structures have been identified which could have negative volumetric thermal expansion. Experimental validation using a robust protocol with data collected at more than 2 different temperatures is required to validate these cases.

The thermal expansion properties of crystalline organic compounds are investigated by data mining of the Cambridge Structural Database (CSD). Negative uniaxial thermal expansion is much more common than generally believed.     

Aggregation-induced photocatalytic activity and efficient photocatalytic hydrogen evolution of amphiphilic rhodamines in water

The development of photocatalysts is an essential task for clean energy generation and establishing a sustainable society. This paper describes the aggregation-induced photocatalytic activity (AI-PCA) of amphiphilic rhodamines and photocatalytic functions of the supramolecular assemblies. The supramolecular assemblies consisting of amphiphilic rhodamines with octadecyl alkyl chains exhibited significant photocatalytic activity under visible light irradiation in water, while the corresponding monomeric rhodamines did not exhibit photocatalytic activity. The studies on the photocatalytic mechanism by spectroscopic and microscopic analyses clearly demonstrated the AI-PCA of the rhodamines. Moreover, the supramolecular assemblies of the rhodamines exhibited excellent photocatalytic hydrogen evolution rates (up to 5.9 mmol g⁻¹ h⁻¹).

Simple amphiphilic rhodamines formed supramolecular assemblies and exhibited aggregation-induced photocatalytic activity and hydrogen evolution in water.     

Synthesis of an elusive,stable 2-azaallyl radical guided by electrochemical and reactivity studies of 2-azaallyl anions

The super electron donor (SED) ability of 2-azaallyl anions has recently been discovered and applied to diverse reactivity, including transition metal-free cross-coupling and dehydrogenative cross-coupling processes. Surprisingly, the redox properties of 2-azaallyl anions and radicals have been rarely studied. Understanding the chemistry of elusive species is the key to further development. Electrochemical analysis of phenyl substituted 2-azaallyl anions revealed an oxidation wave at E_1/2 or E_pa = −1.6 V versus Fc/Fc⁺, which is ∼800 mV less than the reduction potential predicted (E_pa = −2.4 V vs. Fc/Fc⁺) based on reactivity studies. Investigation of the kinetics of electron transfer revealed reorganization energies an order of magnitude lower than commonly employed SEDs. The electrochemical study enabled the synthetic design of the first stable, acyclic 2-azaallyl radical. These results indicate that the reorganization energy should be an important design consideration for the development of more potent organic reductants.

The super electron donor (SED) capabilities of 2-azaallyl anions has recently been discovered and applied to diverse reactivity; their structures and electron transfer characteristics are reported herein.     

Twist and sliding dynamics between interpenetrated frames in Ti-MOF revealing high proton conductivity

We report the design and synthesis of a titanium catecholate framework, MOF-217, comprised of 2,4,6-tri(3,4-dihydroxyphenyl)-1,3,5-triazine (TDHT) and isolated TiO₆ clusters, with 2-fold interpenetrated srs topology. The dynamics of the organic linker, breaking the C_3h symmetry, allowed for reversible twist and sliding between interpenetrated frames upon temperature change and the inclusion of small molecules. Introduction of 28 wt% imidazole into the pores of MOF-217, 28% Im-in-MOF-217, resulted in four orders of magnitude increase in proton conductivity, due to the appropriate accommodation of imidazole molecules and their proton transfer facilitated by the H-bond to the MOF structure across the pores. This MOF-based proton conductor can be operated at 100 °C with a proton conductivity of 1.1 × 10⁻³ S cm⁻¹, standing among the best performing anhydrous MOF proton conductors at elevated temperature. The interframe dynamics represents a unique feature of MOFs that can be accessed in the future design of proton conductors.

Twist and sliding dynamics observed in a titanium catecholate MOF induced by imidazole for efficient proton conduction.     

Lanthanide MOFs for inducing molecular chirality of achiral stilbazolium with strong circularly polarized luminescence and efficient energy transfer for color tuning

We present herein an innovative host–guest method to achieve induced molecular chirality from an achiral stilbazolium dye (DSM). The host–guest system is exquisitely designed by encapsulating the dye molecule in the molecule-sized chiral channel of homochiral lanthanide metal–organic frameworks (P-(+)/M-(−)-TbBTC), in which the P- or M-configuration of the dye is unidirectionally generated via a spatial confinement effect of the MOF and solidified by the dangling water molecules in the channel. Induced chirality of DSM is characterized by solid-state circularly polarized luminescence (CPL) and micro-area polarized emission of DSM@TbTBC, both excited with 514 nm light. A luminescence dissymmetry factor of 10⁻³ is obtained and the photoluminescence quantum yield (PLQY) of the encapsulated DSM in DSM@TbTBC is ∼10%, which is close to the PLQY value of DSM in dilute dichloromethane. Color-tuning from green to red is achieved, owing to efficient energy transfer (up to 56%) from Ln³⁺ to the dye. Therefore, this study for the first time exhibits an elegant host–guest system that shows induced strong CPL emission and enables efficient energy transfer from the host chiral Ln-MOF to the achiral guest DSM with the emission color tuned from green to red.

Homochiral Ln-MOFs are synthesized to encapsulate achiral dyes to induce strong circularly polarized luminescence with a luminescence dissymmetry factor of 10⁻³.     

Protein encapsulation: a new approach for improving the capability of small-molecule fluorogenic probes

Herein, we report a protein-based hybridization strategy that exploits the host-guest chemistry of HSA (human serum albumin) to solubilize the otherwise cell impermeable ONOO⁻ fluorescent probe Pinkment-OAc. Formation of a HSA/Pinkment-OAc supramolecular hybrid was confirmed by SAXS and solution-state analyses. This HSA/Pinkment-OAc hybrid provided an enhanced fluorescence response towards ONOO⁻versusPinkment-OAc alone, as determined by in vitro experiments. The HSA/Pinkment-OAc hybrid was also evaluated in RAW 264.7 macrophages and HeLa cancer cell lines, which displayed an enhanced cell permeability enabling the detection of SIN-1 and LPS generated ONOO⁻ and the in vivo imaging of acute inflammation in LPS-treated mice. A remarkable 5.6 fold (RAW 264.7), 8.7-fold (HeLa) and 2.7-fold increased response was seen relative to Pinkment-OAc alone at the cellular level and in vivo, respectively. We anticipate that HSA/fluorescent probe hybrids will soon become ubiquitous and routinely applied to overcome solubility issues associated with hydrophobic fluorescent imaging agents designed to detect disease related biomarkers.

Herein, we report a protein-based hybridization strategy that exploits the host–guest chemistry of HSA (human serum albumin) to solubilize the otherwise cell impermeable ONOO⁻ fluorescent probe Pinkment-OAc.     

Extremely low-frequency phonon material and its temperature- and photo-induced switching effects

Atomic vibrations due to stretching or bending modes cause optical phonon modes in the solid phase. These optical phonon modes typically lie in the frequency range of 10² to 10⁴ cm⁻¹. How much can the frequency of optical phonon modes be lowered? Herein we show an extremely low-frequency optical phonon mode of 19 cm⁻¹ (0.58 THz) in a Rb-intercalated two-dimensional cyanide-bridged Co–W bimetal assembly. This ultralow frequency is attributed to a millefeuille-like structure where Rb ions are very softly sandwiched between the two-dimensional metal–organic framework, and the Rb ions slowly vibrate between the layers. Furthermore, we demonstrate temperature-induced and photo-induced switching of this low-frequency phonon mode. Such an external-stimulation-controllable sub-terahertz (sub-THz) phonon crystal, which has not been reported before, should be useful in devices and absorbers for high-speed wireless communications such as beyond 5G or THz communication systems.

Extremely low-frequency optical phonon mode in Rb-intercalated two-dimensional cyanide-bridged Co–W bimetal assembly and its temperature- and photo-induced switching effect.     

Adaptive response by an electrolyte: resilience to electron losses in a dye-sensitized porous photoanode

Photovoltage and photocurrents below theoretical limits in dye-sensitized photoelectrochemical solar energy conversion systems are usually attributed to electron loss processes such as dye–electron and electrolyte–electron recombination reactions within the porous photoanode. Whether recombination is a major loss mechanism is examined here, using a multiscale reaction–diffusion computational model to evaluate system characteristics. The dye-sensitized solar cell with an I⁻/I₃⁻ redox couple is chosen as a simple, representative model system because of the extensive information available for it. Two photoanode architectures with dye excitation frequencies spanning 1–25 s⁻¹ are examined, assuming two distinct recombination mechanisms. The simulation results show that although electrolyte–electron reactions are very efficient, they do not significantly impact photoanode performance within the system as defined. This is because the solution-phase electrolyte chemistry plays a key role in mitigating electron losses through coupled reactions that produce I⁻ within the photoanode pores, thereby cycling the electrolyte species without requiring that all electrolyte reduction reactions take place at the more distantly located cathode. This is a functionally adaptive response of the chemistry that may be partly responsible for the great success of this redox couple for dye-sensitized solar cells. The simulation results provide predictions that can be tested experimentally.

Interfacial electrolyte reactions in the pores of a photoanode consume electrons. The losses are offset by compensating solution-phase reactions that generate I⁻ locally, and promote efficient dye cycling and photocurrent generation.     

Capture and displacement-based release of the bicarbonate anion by calix[4]pyrroles with small rigid straps

Two-phenoxy walled calix[4]pyrroles 1 and 2 strapped with small rigid linkers containing pyridine and benzene, respectively, have been synthesized. ¹H NMR spectroscopic analyses carried out in CDCl₃ revealed that both of receptors 1 and 2 recognize only F⁻ and HCO₃⁻ among various test anions with high preference for HCO₃⁻ (as the tetraethylammonium, TEA⁺ salt) relative to F⁻ (as the TBA⁺ salt). The bound HCO₃⁻ anion was completely released out of the receptors upon the addition of F⁻ (as the tetrabutylammonium, TBA⁺ salt) as a result of significantly enhanced affinities and selectivities of the receptors for F⁻ once converted to the TEAHCO₃ complexes. Consequently, relatively stable TEAF complexes of receptors 1 and 2 were formed via anion metathesis occurring within the receptor cavities. By contrast, the direct addition of TEAF to receptors 1 and 2 produces different complexation products initially, although eventually the same TEAF complexes are produced as via sequential TEAHCO₃ and TBAF addition. These findings are rationalized in terms of the formation of different ion pair complexes involving interactions both inside and outside of the core receptor framework.

The inherent selectivity of anion receptors can be reversed by ion pairing occurring both inside and outside of the receptor cavity.     

Molecular structure design of planar zwitterionic polymer electrode materials for all-organic symmetric batteries

All-organic symmetric lithium-ion batteries (LIBs) show promising prospects in sustainable energy storage systems, due to their environmental friendliness, structural diversity and low cost. Nevertheless, it remains a great challenge to explore suitable electrode materials and achieve excellent battery performance for all-organic symmetric LIBs. Herein, a squaraine-anthraquinone polymer (PSQ) electrode material was designed through rational molecular engineering. The well-designed extended π-conjugated system, donor–acceptor structure, abundant redox-active sites and rational manipulation of weak inter-/intramolecular interactions endow the PSQ electrode with outstanding electrochemical performance. The capacity of the PSQ cathode can be optimized to 311.5 mA h g⁻¹ by in situ carbon-template polymerization. Impressively, PSQ-based all-organic symmetric LIBs displayed high reversible capacity (170.8 mA h g⁻¹ at 50 mA g⁻¹), excellent rate performance (64.9% capacity retention at 4000 mA g⁻¹vs. 50 mA g⁻¹), ultralong cycle life up to 30 000 cycles at 2000 mA g⁻¹ and 97% capacity retention after 2500 cycles at 500 mA g⁻¹, which is one of the best comprehensive battery performances among the all-organic LIBs reported thus far.

A squaraine-linked polymer (PSQ) was applied in all-organic symmetric batteries. Attributed to its well-designed molecular strucuture, PSQ shows excellent electrochemical performance, which is one of the best results among the all-organic LIBs.     

Single-molecule junctions of multinuclear organometallic wires: long-range carrier transport brought about by metal–metal interaction

Here, we report multinuclear organometallic molecular wires having (2,5-diethynylthiophene)diyl-Ru(dppe)₂ repeating units. Despite the molecular dimensions of 2–4 nm the multinuclear wires show high conductance (up to 10⁻² to 10⁻³G₀) at the single-molecule level with small attenuation factors (β) as revealed by STM-break junction measurements. The high performance can be attributed to the efficient energy alignment between the Fermi level of the metal electrodes and the HOMO levels of the multinuclear molecular wires as revealed by DFT–NEGF calculations. Electrochemical and DFT studies reveal that the strong Ru–Ru interaction through the bridging ligands raises the HOMO levels to access the Fermi level, leading to high conductance and small β values.

Multinuclear organometallic molecular wires having (diethynylthiophene)diyl-Ru(dppe)₂ repeating units show high conductance with small attenuation factors. The strong Ru–Ru interaction is the key for the long-range carrier transport.