Spontaneous S–Si bonding of alkanethiols to Si(111)–H: towards Si–molecule–Si circuits

We report the synthesis of covalently linked self-assembled monolayers (SAMs) on silicon surfaces, using mild conditions, in a way that is compatible with silicon-electronics fabrication technologies. In molecular electronics, SAMs of functional molecules tethered to gold via sulfur linkages dominate, but these devices are not robust in design and not amenable to scalable manufacture. Whereas covalent bonding to silicon has long been recognized as an attractive alternative, only formation processes involving high temperature and/or pressure, strong chemicals, or irradiation are known. To make molecular devices on silicon under mild conditions with properties reminiscent of Au–S ones, we exploit the susceptibility of thiols to oxidation by dissolved O₂, initiating free-radical polymerization mechanisms without causing oxidative damage to the surface. Without thiols present, dissolved O₂ would normally oxidize the silicon and hence reaction conditions such as these have been strenuously avoided in the past. The surface coverage on Si(111)–H is measured to be very high, 75% of a full monolayer, with density-functional theory calculations used to profile spontaneous reaction mechanisms. The impact of the Si–S chemistry in single-molecule electronics is demonstrated using STM-junction approaches by forming Si–hexanedithiol–Si junctions. Si–S contacts result in single-molecule wires that are mechanically stable, with an average lifetime at room temperature of 2.7 s, which is five folds higher than that reported for conventional molecular junctions formed between gold electrodes. The enhanced “ON” lifetime of this single-molecule circuit enables previously inaccessible electrical measurements on single molecules.

Spontaneously formed Si–S bonds enable monolayer and single-molecule Si–molecule–Si circuits.     

Boosting homogeneous chemoselective hydrogenation of olefins mediated by a bis(silylenyl)terphenyl-nickel(0) pre-catalyst

The isolable chelating bis(N-heterocyclic silylenyl)-substituted terphenyl ligand [Si^II(Terp)Si^II] as well as its bis(phosphine) analogue [P^III(Terp)P^III] have been synthesised and fully characterised. Their reaction with Ni(cod)₂ (cod = cycloocta-1,5-diene) affords the corresponding 16 VE nickel(0) complexes with an intramolecular η²-arene coordination of Ni, [E(Terp)E]Ni(η²-arene) (E = P^III, Si^II; arene = phenylene spacer). Due to a strong cooperativity of the Si and Ni sites in H₂ activation and H atom transfer, [Si^II(Terp)Si^II]Ni(η²-arene) mediates very effectively and chemoselectively the homogeneously catalysed hydrogenation of olefins bearing functional groups at 1 bar H₂ pressure and room temperature; in contrast, the bis(phosphine) analogous complex shows only poor activity. Catalytic and stoichiometric experiments revealed the important role of the η²-coordination of the Ni(0) site by the intramolecular phenylene with respect to the hydrogenation activity of [Si^II(Terp)Si^II]Ni(η²-arene). The mechanism has been established by kinetic measurements, including kinetic isotope effect (KIE) and Hammet-plot correlation. With this system, the currently highest performance of a homogeneous nickel-based hydrogenation catalyst of olefins (TON = 9800, TOF = 6800 h⁻¹) could be realised.

The isolable chelating bis(N-heterocyclic silylenyl)-substituted terphenyl ligand [Si^II(Terp)Si^II] as well as its bis(phosphine) analogue [P^III(Terp)P^III] have been synthesised and fully characterised.     

Synthesis of hydrosilylboronates via the monoborylation of a dihydrosilane Si–H bond and their application for the generation of dialkylhydrosilyl anions

The synthesis of a series of hydrosilylboronates via the selective iridium- or nickel-catalyzed monoborylation of dihydrosilane Si–H bonds is described. The synthesized silylboronates, which bear a single Si–H bond, can be used as novel silicon nucleophiles in the presence of transition-metal catalysts or bases. The first ²⁹Si{¹H} NMR spectroscopic evidence for the formation of (t-Bu)₂HSiLi, generated by the reaction of (t-Bu)₂HSi–B(pin) with MeLi, is reported as the first example of a dialkylhydorosilyl lithium species.

Monoborylation of a dihydrosilane Si–H bond can be achieved in the presence of iridium- or nickel-based catalysts, yielding novel hydrosilylboronates that bear a hydrogen atom at the silicon center.     

Controllable access to trifluoromethyl-containing indoles and indolines: palladium-catalyzed regioselective functionalization of unactivated alkenes with trifluoroacetimidoyl chlorides

The synthesis of diverse products from the same starting materials is always attractive in organic chemistry. Here, a palladium-catalyzed substrate-controlled regioselective functionalization of unactivated alkenes with trifluoroacetimidoyl chlorides has been developed, which provides a direct but controllable access to a variety of structurally diverse trifluoromethyl-containing indoles and indolines. In more detail, with respect to γ,δ-alkenes, 1,1-geminal difunctionalization of unactivated alkenes with trifluoroacetimidoyl chloride enables the [4 + 1] annulation to produce indoles; as for β,γ-alkenes, a [3 + 2] heteroannulation with the hydrolysis product of trifluoroacetimidoyl chloride through 1,2-vicinal difunctionalization of alkenes occurs to deliver indoline products. The structure of alkene substrates differentiates the regioselectivity of the reaction.

A palladium-catalyzed dual functionalization of unactivated alkenes with trifluoroacetimidoyl chlorides toward the synthesis of structurally diverse trifluoromethyl-containing indoles and indolines has been developed.     

A cyclopentadienyl functionalized silylene – a flexible ligand for Si- and C-coordination

The synthesis of a 1,2,3,4-tetramethylcyclopentadienyl (Cp⁴) substituted four-membered N-heterocyclic silylene [{PhC(NtBu)₂}Si(C₅Me₄H)] is reported first. Then, selected reactions with transition metal and a calcium precursor are shown. The proton of the Cp⁴-unit is labile. This results in two different reaction pathways: (1) deprotonation and (2) rearrangement reactions. Deprotonation was achieved by the reaction of [{PhC(NtBu)₂}Si(C₅Me₄H)] with suitable zinc precursors. Rearrangement to [{PhC(NtBu)₂}(C₅Me₄)SiH], featuring a formally tetravalent silicon R₂C Si(R′)–H unit, was observed when the proton of the Cp⁴ ring was shifted from the Cp⁴-ring to the silylene in the presence of a Lewis acid. This allows for the coordination of the Cp⁴-ring to a calcium compound. Furthermore, upon reaction with transition metal dimers [MCl(cod)]₂ (M = Rh, Ir; cod = 1,5-cyclooctadiene) the proton stays at the Cp⁴-ring and the silylene reacts as a sigma donor, which breaks the dimeric structure of the precursors.

A cyclopentadienyl functionalized silylene or its derivatives can be coordinated in all three forms: silylene (A), anion (B), and sila fulvene (C).     

Rh(i)- and Rh(ii)-catalyzed C–H alkylation of benzylamines with alkenes and its application in flow chemistry

The Rh-catalyzed C–H alkylation of benzylamines with alkenes using a picolinamide derivative as a directing group is reported. Both Rh(i) and Rh(ii) complexes can be used as active catalysts for this transformation. In addition, a flow set up was designed to successfully mimic this process under flow conditions. Several examples are presented under flow conditions and it was confirmed that a flow process is advantageous over a batch process. Deuterium labelling experiments were performed to elucidate the mechanism of the reaction, and the results indicated a possible carbene mechanism for this C–H alkylation process.

Rh(i)- and Rh(ii)-catalyzed C–H alkylation of benzylamines with alkenes using a picolinamide derivative as a directing group is reported under both batch and flow.     

Intramolecular Friedel–Crafts alkylation with a silylium-ion-activated cyclopropyl group: formation of tricyclic ring systems from benzyl-substituted vinylcyclopropanes and hydrosilanes

A trityl-cation-initiated annulation of benzyl-substituted vinylcyclopropanes (VCPs) with hydrosilanes is reported. Two Si–C(sp³) bonds and one C(sp²)–C(sp³) bond are formed in this process where an intramolecular 6-endo-tet Friedel–Crafts alkylation of a silylium-ion-activated cyclopropane ring is the rate-determining key step. The reaction mechanism is proposed based on computations and is in agreement with experimental observations. The new reaction leads to an unprecedented silicon-containing 6/6/5-fused ring system. A phenethyl-substituted VCP derivative yields another unknown tricycle having 6/6/6 ring fusion by reacting in a related but different way involving a 6-exo-tet ring closure.

Downstream to alkene hydrosilylation, the opening of the cyclopropane ring in benzyl-substituted VCPs is interlinked with an S_EAr of the aryl group.     

Direct electrochemical defluorinative carboxylation of α-CF3 alkenes with carbon dioxide

An unprecedented γ-carboxylation of α-CF₃ alkenes with CO₂ is reported. This approach constitutes a rare example of using electrochemical methods to achieve regioselectivity complementary to conventional metal catalysis. Accordingly, using platinum plate as both a working cathode and a nonsacrificial anode in a user-friendly undivided cell under constant current conditions, the γ-carboxylation provides efficient access to vinylacetic acids bearing a gem-difluoroalkene moiety from a broad range of substrates. The synthetic utility is further demonstrated by gram-scale synthesis and elaboration to several value-added products. Cyclic voltammetry and density functional theory calculations were performed to provide mechanistic insights into the reaction.

A γ-carboxylation of α-CF₃ alkenes with CO₂ using platinum plate as both working cathode and nonsacrificial anode has been developed.     

Indirect and Direct Grafting of Transition Metals to Siliconoids

Unsaturated charge‐neutral silicon clusters (siliconoids) are important as gas‐phase intermediates between molecules and the elemental bulk. With stable zirconocene‐ and hafnocene‐substituted derivatives, we here report the first examples containing directly bonded transition‐metal fragments that are readily accessible from the ligato‐lithiated Si₆ siliconoid ( 1Li ) and Cp₂MCl₂ (M=Zr, Hf). Charge‐neutral siliconoid ligands with pending tetrylene functionality were prepared by the reaction of amidinato chloro tetrylenes [PhC(NtBu)₂]ECl (E=Si, Ge, Sn) with 1Li , thus confirming the principal compatibility of such low‐valent functionalities with the unsaturated Si₆ cluster scaffold. The pronounced donor properties of the tetrylene/siliconoid hybrids allow for their coordination to the Fe(CO)₄ fragment.     

Ortho-aryl substituted DPEphos ligands: rhodium complexes featuring C–H anagostic interactions and B–H agostic bonds

The synthesis of new Schrock–Osborn Rh(i) pre-catalysts with ortho-substituted DPEphos ligands, [Rh(DPEphos-R)(NBD)][BAr^F₄] [R = Me, OMe, ⁱPr; Ar^F = 3,5-(CF₃)₂C₆H₃], is described. Along with the previously reported R = H variant, variable temperature ¹H NMR spectroscopic and single-crystal X-ray diffraction studies show that these all have axial (C–H)⋯Rh anagostic interactions relative to the d⁸ pseudo square planar metal centres, that also result in corresponding downfield chemical shifts. Analysis by NBO, QTAIM and NCI methods shows these to be only very weak C–H⋯Rh bonding interactions, the magnitudes of which do not correlate with the observed chemical shifts. Instead, as informed by Scherer''s approach, it is the topological positioning of the C–H bond with regard to the metal centre that is important. For [Rh(DPEphos–ⁱPr)(NBD)][BAr^F₄] addition of H₂ results in a Rh(iii) ⁱPr–C–H activated product, [Rh(κ³,σ-P,O,P-DPEphos-ⁱPr′)(H)][BAr^F₄]. This undergoes H/D exchange with D₂ at the ⁱPr groups, reacts with CO or NBD to return Rh(i) products, and reaction with H₃B·NMe₃/tert-butylethene results in a dehydrogenative borylation to form a complex that shows both a non-classical B–H⋯Rh 3c-2e agostic bond and a C–H⋯Rh anagostic interaction at the same metal centre.

Rh(i) complexes of ortho-substituted DPEphos-R (R = H, Me, OMe, ⁱPr) ligands show anagostic interactions; for R =ⁱPr C–H activation/dehydrogenative borylation forms a product exhibiting both B–H/Rh 3c-2e agostic and C–H/Rh anagostic motifs.     

Stereo-controlled anti-hydromagnesiation of aryl alkynes by magnesium hydrides

A concise protocol for anti-hydromagnesiation of aryl alkynes was established using 1 : 1 molar combination of sodium hydride (NaH) and magnesium iodide (MgI₂) without the aid of any transition metal catalysts. The resulting alkenylmagnesium intermediates could be trapped with a series of electrophiles, thus providing facile accesses to stereochemically well-defined functionalized alkenes. Mechanistic studies by experimental and theoretical approaches imply that polar hydride addition from magnesium hydride (MgH₂) is responsible for the process.

Anti-hydromagnesiation of aryl alkynes was facilitated solely by magnesium hydride. The resulting alkenylmagnesium intermediates were functionalized with various electrophiles to afford stereochemically defined tri-substituted alkenes.     

Defunctionalisation catalysed by boron Lewis acids

Selective defunctionalisation of organic molecules to valuable intermediates is a fundamentally important transformation in organic synthesis. Despite the advances made in efficient and selective defunctionalisation using transition-metal catalysis, the cost, toxicity, and non-renewable properties limit its application in industrial manufacturing processes. In this regard, boron Lewis acid catalysis has emerged as a powerful tool for the cleavage of carbon–heteroatom bonds. The ground-breaking finding is that the strong boron Lewis acid B(C₆F₅)₃ can activate Si–H bonds through η¹ coordination, and this Lewis adduct is a key intermediate that enables various reduction processes. This system can be tuned by variation of the electronic and structural properties of the borane catalyst, and together with different hydride sources high chemoselectivity can be achieved. This Perspective provides a comprehensive summary of various defunctionalisation reactions such as deoxygenation, decarbonylation, desulfurisation, deamination, and dehalogenation, all of which catalysed by boron Lewis acids.

The combination of boron Lewis acid catalysts and hydride sources enables the cleavage of various carbon–heteroatom bonds.     

Fragmentation behavior of Si2Cln+ cations (n = 1—6)

Sector-field mass spectrometry was used to probe the fragmentation patterns of the cationic silicon chlorides Si₂Cl_n ⁺ (n = 1—6). For almost all Si₂Cl_n ⁺ ions, Si—Si fragmentation predominates the Si—Cl bond cleavage both in the metastable ion and collisional activation mass spectra. Analysis of the fragmentation patterns indicates that the long-lived radical cation Si₂Cl₆ ^·+ corresponds to a complex [SiCl₂·SiCl₄]^·+ rather than the intact molecular ion of hexachlorodisilane. The behavior of Si₂Cl₅ ⁺ is consistent with the formation of the (trichlorosilyl)dichlorosilyl cation Cl₃SiSICl₂ ⁺. Structural aspects are also discussed for the other Si₂Cl_n ⁺ species. A semi-quantitative analysis of the fragmentation patterns in conjunction with the literature thermochemistry data was used to estimate some thermochemical properties of the Si₂Cl_n ⁺ cations.     

Arylation of gem-difluoroalkenes using a Pd/Cu Co-catalytic system that avoids β-fluoride elimination

Pd^II/Cu^I co-catalyze an arylation reaction of gem-difluoroalkenes using arylsulfonyl chlorides to deliver α,α-difluorobenzyl products. The reaction proceeds through a β,β-difluoroalkyl–Pd intermediate that typically undergoes unimolecular β-F elimination to deliver monofluorinated alkene products in a net C–F functionalization reaction. However to avoid β-F elimination, we offer the β,β-difluoroalkyl–Pd intermediate an alternate low-energy route involving β-H elimination to ultimately deliver difluorinated products in a net arylation/isomerization sequence. Overall, this reaction enables exploration of new reactivities of unstable fluorinated alkyl–metal species, while also providing new opportunities for transforming readily available fluorinated alkenes into more elaborate substructures.

Pd^II/Cu^I co-catalyze a desulfitative arylation of aliphatic gem-difluoroalkenes in a radical arylation/migratory insertion sequence that avoids β-F elimination.     

Visible-light-driven palladium-catalyzed Dowd–Beckwith ring expansion/C–C bond formation cascade

A visible-light-induced palladium-catalyzed Dowd–Beckwith ring expansion/C–C bond formation cascade is described. A range of six to nine-membered β-alkenylated cyclic ketones possessing a quaternary carbon center were accessed under mild conditions. Besides styrenes, the electron-rich alkenes such as silyl enol ethers and enamides were also compatible, providing the desired β-alkylated cyclic ketones in moderate to good yields.

An intermolecular Dowd–Beckwith ring expansion/C–C bond formation is achieved through light-induced palladium catalysis. Not only styrenes but also the electron-rich alkenes such as silyl enol ethers and enamides were also compatible in this reaction.     

Rh(i)-catalyzed stereoselective desymmetrization of prochiral cyclohexadienones via highly exo-selective Huisgen-type [3 + 2] cycloaddition

A Rh(i)-catalyzed highly stereoselective desymmetrization of 2-alkynylbenzaldehyde-tethered cyclohexadienones triggered by intramolecular Huisgen-type [3 + 2] cycloaddition has been developed. This method enables convergent construction of complex epoxy-bridged polycyclic ring systems with five contiguous stereocenters with excellent exo-selectivity and broad substrate scope. The highly atom-economical process involves 6-endo-dig cyclization of carbonyl oxygen onto an activated alkyne resulting in a highly reactive metal–benzopyrylium intermediate, which readily undergoes intramolecular [3 + 2] annulation/hydration. Asymmetric induction is also achieved for the first time in Rh(i)-catalyzed 1,3-dipolar cycloaddition using an easily accessible chiral diene as the ligand.

A Rh(i)-catalyzed highly stereoselective desymmetrization of 2-alkynylbenzaldehyde-tethered cyclohexadienones triggered by intramolecular Huisgen-type [3 + 2] cycloaddition has been developed.     

Organoborohydride-catalyzed Chichibabin-type C4-position alkylation of pyridines with alkenes assisted by organoboranes

The first NaBEt₃H-catalyzed intermolecular Chichibabin-type alkylation of pyridine and its derivatives with alkenes as the latent nucleophiles is presented with the assistance of BEt₃, and a series of branched C4-alkylation pyridines, even highly congested all-carbon quaternary center-containing triarylmethanes can be obtained in a regiospecific manner. Therefore, the conventional reliance on high cost and low availability transition metal catalysts, prior formation of N-activated pyridines, organometallic reagents, and extra oxidation operation for the construction of a C–C bond at the C4-position of the pyridines in previous methods are not required. The corresponding mechanism and the key roles of the organoborane were elaborated by the combination of H/D scrambling experiments, ¹¹B NMR studies, intermediate trapping experiments and computational studies. This straightforward and mechanistically distinct organocatalytic technology not only opens a new door for the classical but still far less well-developed Chichibabin-type reaction, but also sets up a new platform for the development of novel C–C bond-forming methods.

The first NaBEt₃H-catalyzed intermolecular Chichibabin-type alkylation of pyridines with alkenes as the latent nucleophiles is presented in the presence of BEt₃, and a series of branched C4-alkylated pyridines were obtained in a regiospecific manner.     

Palladium-catalyzed hydroalkylation of methylenecyclopropanes with simple hydrazones

A palladium-catalyzed hydroalkylation reaction of methylenecyclopropanes via highly selective C–C σ-bond scission was achieved under mild conditions, in which simple hydrazones served as carbanion equivalents. This method featured good functional group compatibility, affording high yields of C-alkylated terminal alkenes.

A palladium-catalyzed hydroalkylation of methylenecyclopropanes via selective C–C σ-bond scission was achieved, in which simple hydrazones served as carbanion equivalents. This method affords high yields of C-alkylated terminal alkenes with good functional group compatibility.     

A singlet oxygen self-reporting photosensitizer for cancer phototherapy

Photodynamic cancer therapy has attracted great attention with the increasing threat of tumors, and improving its therapeutic efficacy is highly desirable. However, due to the highly efficient intersystem crossing potency to generate singlet oxygen (¹O₂), high-efficiency photosensitizers often suffer from weak fluorescence and excess injury to normal tissue. To overcome these obstacles, here we show a reliable self-reporting strategy for real-time monitoring of therapeutic progression. As a proof of concept, a molecular dyad is designed by connecting benzo[a]phenoselenazinium (NBSe) to rhodamine (Rh), namely Rh-NBSe, where the fluorescence of the Rh unit is initially suppressed by the fluorescence resonance energy transfer mechanism, but enabled to recover as feedback signal once the reaction with photosensitized ¹O₂ takes place. The observed fluorescence increases by irradiation in vitro and in vivo successfully reflect the real-time ¹O₂ generation speed in photodynamic therapy. In addition, the favorable therapeutic advantages of Rh-NBSe are also verified, for example, the high Φ_Δ (0.8) and the low IC₅₀ (0.2 μM, 6 J cm⁻²). Based on the therapeutic ability and real-time ¹O₂ self-reporting ability, Rh-NBSe demonstrates significant potential for self-regulating phototherapy.

Photodynamic cancer therapy has attracted great attention with the increasing threat of tumors, and improving its therapeutic efficacy is highly desirable.     

Efficient alkene hydrosilation with bis(8-quinolyl)phosphine (NPN) nickel catalysts. The dominant role of silyl-over hydrido-nickel catalytic intermediates

A cationic nickel complex of the bis(8-quinolyl)(3,5-di-tert-butylphenoxy)phosphine (NPN) ligand, [(NPN)NiCl]⁺, is a precursor to efficient catalysts for the hydrosilation of alkenes with a variety of hydrosilanes under mild conditions and low catalyst loadings. DFT studies reveal the presence of two coupled catalytic cycles based on [(NPN)NiH]⁺ and [(NPN)NiSiR₃]⁺ active species, with the latter being more efficient for producing the product. The preferred silyl-based catalysis is not due to a more facile insertion of alkene into the Ni–Si (vs. Ni–H) bond, but by consistent and efficient conversions of the hydride to the silyl complex.

A cationic nickel complex of the bis(8-quinolyl)(3,5-di-tert-butylphenoxy)phosphine (NPN) ligand, [(NPN)NiCl]⁺, is a precursor to efficient catalysts for the hydrosilation of alkenes with hydrosilanes under mild conditions and low catalyst loadings.