Preparation of micron-size monodisperse polymer microspheres having cationic groups

Micron-size monodisperse crosslinked polymer microspheres having chloromethyl groups were prepared by seeded copolymerization of styrene, divinylbenzene, and chloromethylstyrene in the presence of 2.1- monodisperse polystyrene seed particles produced by dispersion polymerization. The modification reaction of chloromethyl groups on the surfaces with polyamines such as triethylenetetramine and ethylenediamine was carried out. From the measurements of potential and the amount of chloride ion released, the introduction of a large number of cationic groups at the surfaces was confirmed.Part CXXXI of the series Studies on suspension and Emulsion.     

Preparation of micron-size monodisperse polymer microspheres having chloromethyl group

Micron-size monodisperse polymer microspheres having chloromethyl groups thereon were prepared by two-step polymerization process as follows. First, micron-size monodisperse polystyrene particles were prepared by dispersion polymerization with 2,2-azobisisobutyronitrile as initiator in ethanol-water medium in the presence of poly(acrylic acid) as stabilizer under various conditions. Secondly, in the presence of the 1.9-m monodisperse polystyrene particles produced under the optimum conditions, seeded copolymerization for styrene and chloromethyl styrene was carried out. The seeded copolymerization proceeded smoothly without producing new particles, and it was confirmed by x-ray photoelectron spectroscopy that the chloromethyl group existed more at the surface of the produced microsphere than at that of film cast from the benzene solution in which the microspheres were dissolved.Part CVI of the series Studies on Suspension and Emulsion.     

Synthesis,stereochemistry and fluorescence properties of polystyrenes having carbazole substituents

Poly(styrene)s bearing carbazole substituents at various positions were synthesised by homopolymerisation of 3-(9-carbazolylmethyl)styrene and 4-(9-carbazolylmethyl)styrene and by chemical modification of preformed poly(styrene)s prepared in the presence of different initiators. Main chain stereochemistry of the polymer samples was investigated by ¹³C-NMR and related to the initiation process. The fluorescence emission spectra were independent of the stereochemistry of polymer backbone and exhibited only monomer emission. In no case was there any evidence of excimer fluorescence. In contrast, energy migration appeared to be very efficient, as evaluated by measurements of the degree of fluorescence polarisation relative to that of a structurally related model compound     

Preparation of micron-size monodisperse polymer microspheres having crosslinked structures and vinyl groups

Micron-size monodisperse polymer microspheres having crosslinked structures therein and vinyl groups thereon were prepared by seeded copolymerization of styrene and divinylbenzene with 2,2-azobisisobutyronitrile as initiator in ethanolwater medium in the presence of 2.1-m monodisperse polystyrene seed particles produced by dispersion polymerization. The optimum conditions of the seeded copolymerization for producing the microspheres with good monodispersity and colloidal stability were determined.Part CXXI of the series Studies on Suspension and Emulsion.     

Synthesis of 6-, 7- and 8-membered cyclosiloxanes having multifunctional groups

Cyclosiloxanes having intramolecular donor atoms, a Si-Si bond, and vinyl groups were synthesized as useful precursors for ring-opening polymerization. 1,1,3,3-Tetrakis(dimethylaminomethylphenyl)-5,5-dimethylcyclotrisiloxane was also synthesized and characterized by single crystal X-ray structural analysis, which shows strong coordination from N to Si in the solid state.     

Preparation of magnetic microspheres with thiol-containing polymer brushes and immobilization of gold nanoparticles in the brush layer

Narrow-disperse magnetic microspheres were prepared by alkaline coprecipitation of Fe²⁺ and Fe³⁺ ions within poly(acrylic acid–divinylbenzene) microspheres that were prepared by distillation–precipitation copolymerization. Magnetic microspheres with polymer brushes that contain epoxy groups were prepared by graft copolymerization of glycidyl methacrylate and glycerol monomethacrylate via atom transfer radical polymerization (ATRP) from the magnetic microsphere surfaces. Subsequently, magnetic microspheres with thiol-containing polymer brushes were prepared by treating the epoxy group-containing magnetic microspheres with sodium hydrosulfide. Gold nanoparticles were immobilized in the brush layer of the thiol-containing magnetic microspheres through Au–S coordination. The catalytic activity of the gold nanoparticle-immobilized magnetic microspheres was investigated using the reduction of 4-nitrophenol to 4-aminophenol with sodium borohydride as a model reaction. The catalyst could be reused for over 10 cycles without noticeable loss of catalytic activity.     

Synthesis,structure, and magnetism of a ytterbium coordination polymer with 5-sulfonyl-1,2,4-benzenetricarboxylate and oxalate

[Yb₂(SBTC)(ox)(H₂O)₅] _n (1) (H₄-SBTC?=?5-sulfonyl-1,2,4-benzenetricarboxylic acid and ox?=?oxalate) has been hydrothermally synthesized by reaction of 5-sulfonyl-1,2,4-benzenetricarboxylic acid with Yb(NO₃)₃?5H₂O. In situ formation of oxalate derived from H₄-SBTC is unprecedented and adds a new oxalate formation reaction to in situ ligand syntheses. Compound 1 features a 2-D bilayered coordination network, which is further extended into a 3-D supramolecular framework through interlayered hydrogen bonds. Magnetic measurements on 1 indicate that there is an antiferromagnetic interaction between Yb(III) ions.     

Synthesis of tri-layer hybrid microspheres with magnetic core and functional polymer shell

Tri-layer magnetite/silica/poly(divinylbenzene) (Fe₃O₄/SiO₂/PDVB) core-shell hybrid microspheres were prepared by distillation precipitation polymerization of divinylbenzene (DVB) in the presence of magnetite/3-(methacryloxyl)propyl trimethoxysilane (MPS) modified silica core-shell particles as seeds. The polymerization of DVB was performed in neat acetonitrile with 2,2′-azobisisobutyronitrile (AIBN) as initiator to coat magnetite/MPS-modified silica particles through the capture of DVB oligomers with the aid of vinyl groups on the surface of inorganic seeds in absence of any stabilizer or surfactant. Other magnetite/silica/polymer tri-layer hybrid particles, such as magnetite/silica/poly(ethyleneglycol dimethacrylate) (Fe₃O₄/SiO₂/PEGDMA) and magnetite/silica/poly(ethyleneglycol dimethacrylate-co-methacrylic acid) (Fe₃O₄/SiO₂/P(EGDMA-co-MAA)) with various polarity and functionality, were also prepared by this procedure. Magnetite/silica/poly(N,N′-methylenebisacrylamide-co-methacrylic acid) (Fe₃O₄/SiO₂/P(MBAAm-co-MAA)) were synthesized with unmodified magnetite/silica particles as seeds. The resultant tri-layer hybrid particles were characterized by transmission electron microscopy (TEM), Fourier transform infrared spectra (FT-IR), dynamic light scattering, and vibrating sample magnetometer (VSM).     

Synthesis of polymer magnetic microspheres for immunomagnetometric assay

A method for the synthesis of polymer magnetic microspheres which allows the production of magnetic labels with a high magnetic susceptibility was developed. The microspheres contain surface functional groups for immobilization of bioligands and meet the requirements for immunomagnetometric assay. The obtained polymer magnetic microspheres were subject to comparative tests with commercial magnetic latexes.     

Synthesis of titania/polymer core-shell hybrid microspheres

Monodisperse titania/polymer core-shell microspheres were prepared by a two-stage reaction with titania as core and poly(ethyleneglycol dimethacrylate) (PEGDMA) as shell, in which the titania cores were synthesized by a sol-gel method and subsequently grafted with 3-trimethoxysilyl methacrylate as the first-stage reaction to incorporate the vinyl groups on the surface of inorganic core. The PEGDMA shell was then encapsulated over the MPS-modified titania core by distillation precipitation polymerization of ethyleneglycol dimethacrylate in neat acetonitrile during the second-stage polymerization via capture of the radicals of EGDMA with the aid of the reactive vinyl groups on the surface of inorganic core without any stabilizer or surfactant. The shell thickness of the core-shell hybrid microspheres was controlled by the feed of EGDMA monomer during the polymerization. The resultant titania particles and core-shell microspheres were studied by transmission electron microscopy, Fourier-transform infrared spectra, X-ray photoelectron spectroscopy, and thermogravimetric analysis.     

Synthesis and properties of the ordered structures of polymer microspheres

Russian Chemical Bulletin - Ordered structures of polymer microspheres of various diameters (6–200 μm) were prepared on a water surface followed by transposition and fixation on a solid...     

Synthesis of monodisperse polymer microspheres by photopolymerization of microdroplets

We have examined photopolymerization of highly monodisperse microdroplets of monomer solutions under UV-light radiation. Microdroplets were generated using a modified vibrating aerosol generator, and the diameter of the droplets can be tuned to any size between 5 to 100 m. Polymer particles derived from the droplets were characterized by optical microscopy and SEM. The results show that the polymer particles, under optimum conditions, can be highly spherical and monodisperse. The diameter and morphology of resulting microspheres depend on the diameter of the monomer solution droplets, monomer concentration, photopolymerization reaction temperature, residence time, and droplet dispersion.     

Synthesis of core-shell polymer microspheres by two-stage distillation-precipitation polymerization

Narrow- or monodisperse core-shell polymer microspheres with a dense core and a lightly crosslinked shell with different functional groups, such as ester, hydroxyl, cyano, were prepared by two-stage distillation-precipitation polymerization without any stabilizer. Commercial divinylbenzene (DVB), containing 80% of DVB was polymerized by distillation-precipitation polymerization with 2,2′-azobis(2-methyl propionitrile) (AIBN) as initiator in neat acetonitrile in the absence of any stabilizer as the first stage polymerization and used as the core. When the conversion of DVB was about 35% in the first stage, the second-comonomers with different functional groups, such as methyl methacrylate (MMA), ethyl methacrylate (EMA), butyl methacrylate (BMA), 2-hydroxyethyl methacrylate (HEMA), i-octyl acrylate (i-OA), dodecyl acrylate (DA), methyl acrylate (MA), ethyl acrylate (EA), ethylene glycol dimethacrylate (EGDMA), triethyleneglycol dimethacrylate (TEGDMA), trimethylolpropane trimethacrylate (Trim), and acrylnitrile (AN) together with AIBN were introduced, respectively, into the reaction system and copolymerized with unreacted DVB on the core surface to form a lightly crosslinked functional shell. The resulting core-shell polymer particles were characterized with scanning electron microscopy (SEM) and FT-IR spectra.     

Synthesis,crystal structure,and fluorescence of a 2-D coordination polymer

A 2-D coordination polymer with mixed ligands, [Zn₂(BDC)(4,4′-bipy) (HCOO)₂] (1) (BDC, 1,4-benzenedicarboxylate; 4,4′-bipy, 4,4′-bipyridine), has been synthesized by solvothermal reaction. Compound 1 provides the first coordination polymer structure constructed by bridging BDC, 4,4′-bipy, and formate. Both BDC and 4,4′-bipy link zincs alternatively, resulting in a zigzag coordination chain; adjacent chains are further linked by formates to form an infinite extended 2-D folding screen layer. The synthesis mechanism and fluorescence property are discussed.     

Synthesis of cross-linked polymer microspheres in supercritical carbon dioxide

Herein we report the synthesis of highly cross-linked polymers based on divinylbenzene by heterogeneous polymerization in supercritical CO₂ (scCO₂). The polymers were isolated in the form of discrete microspheres (diameter = 1.5–5 μm) in good yields (≥90%), in the absence of any stabilizers. In the presence of a CO₂-soluble polymeric stabilizer, much smaller particles (diameter <0.5 μm) were formed in high yields (≥95%) by emulsion polymerization in scCO₂.     

Semiconductor nanocrystals with multifunctional polymer ligands

In this letter, we describe the preparation of a versatile polymer ligand, which can be attached to CdSe/ZnS semiconductor nanocrystals via a phase transfer reaction. The ligand is based on a chain of reactive esters, which can, in principle, be substituted by any compound containing amino-functionalities. The polymer/nanocrystal complexes are characterized in terms of structure and photostability.     

Production of anomalous polymer microspheres having uneven surfaces by “stepwise” heterocoagulation technique

Anomalous polymer microspheres having uneven surfaces were produced by stepwise heterocoagulation technique of small polymer particles (SPs) onto large polymer particles (LPs).SPs andLPs have surface charges opposite to each other in the emulsion states.SPs were produced by emulsion copolymerization of styrene and methacryloyloxyethyltrimethylammonium chloride, andLPs by emulsion terpolymerization of styrene, butyl acrylate and methacrylic acid, with nonionic emulsifier being used in both cases. Maximum covering ofLP bySPs was obtained under the conditions that both emulsions were blended without the coagulation at pH 3 at room temperature and then left stand to coagulate with each other at 70 °C for 4 h at pH 9.Part CXI of the series Studies on Suspension and Emulsion.