What can you learn from a molecular probe? New insights on the behavior of C343 in homogeneous solutions and AOT reverse micelles

The behavior of C343, a common molecular probe utilized in solvation dynamics experiments, was studied in homogeneous media and in aqueous and nonaqueous reverse micelles (RMs). In homogeneous media, the Kamlet and Taft solvatochromic comparison method quantified solute-solvent interactions from the absorption and emission bands showing that the solvatochromic behavior of the dye depends not only on the polarity of the medium but also on the hydrogen-bonding properties of the solvent. Specifically, in the ground state the molecule displays a bathochromic shift with the polarity polarizability (pi) and the H-bond acceptor (beta) ability of the solvents and a hypsochromic shift with the hydrogen donor ability (alpha) of the media. The carboxylic acid group causes C343 to display greater sensitivity to the beta than to the pi polarity parameter; this sensitivity increases in the excited state, while the dependence on alpha vanishes. This demonstrates that C343 forms a stable H-bond complex with solvents with high H-bond acceptor ability (high beta) and low H-bond donor character (low alpha). Spectroscopy in nonpolar solvents reveals J-aggregate formation. With information from the Kamlet-Taft analysis, C343 was used to explore RMs composed of water or polar solvents/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/isooctane using absorption, emission, and time-resolved spectroscopies. Sequestered polar solvents included ethylene glycol (EG), formamide (FA), N,N-dimethylformamide (DMF), and N,N-dimethylacetamide (DMA). Dissolved in the AOT RM systems at low concentration, C343 exists as a monomer, and when introduced to the RM samples in its protonated form, C343 remains protonated driving it to reside in the interface rather than the water pool. The solvathochromic behavior of the dye depends the specific polar solvent encapsulated in the RMs, revealing different types of interactions between the solvents and the surfactant. EG and water H-bond with the AOT sulfonate group destroying their bulk H-bonded structures. While water remains well segregated from the nonpolar regions, EG appears to penetrate into the oil side of the interface. In aqueous AOT RMs, C343 interacts with neither the sulfonate group nor the water, perhaps because of intramolecular H-bonding in the dye. DMF and DMA interact primarily through dipole-dipole forces, and the strong interactions with AOT sodium counterions destroy their bulk structure. FA also interacts with the Na+ counterions but retains its H-bond network present in bulk solvent. Surprisingly, FA appears to be the only polar solvent other than water forming a "polar-solvent pool" with macroscopic properties similar to the bulk.     

What makes epothilones stick?

The potent epothilone tubulin polymerization promoters have been studied extensively by synthetic and SAR approaches. The paper by Buey et al. (, this issue of Chemistry & Biology) adds a new depth of mechanistic understanding by a careful analysis of the tubulin polymerization mechanism of the epothilones.     

What makes an N12 cage stable?

Much recent attention has been given to molecules containing only nitrogen atoms. Such molecules N(x) can undergo the reaction N(x) --> (x/2)N(2), which is very exothermic. These molecules are potential candidates for high energy density materials (HEDM). However, many all-nitrogen molecules dissociate too easily to be stable, practical energy sources. It is important to know which nitrogen molecules will be stable and which will not. In the current study, a variety of N(12) cages with all single bonds are examined by theoretical calculations to determine which ones are the most thermodynamically stable. Calculations are carried out using Hartree-Fock (HF) theory, gradient-corrected density functional theory (DFT), and Moller-Plesset perturbation theory (MP2 and MP4). Relative energies among the various isomers are calculated and trends are examined in order to determine which structural features lead to the most energetically favorable molecules.     

What makes the cylinder-shaped N72 cage stable?

Recent theoretical studies have suggested that the stabilizing factors for large nitrogen cages tend to favor more five-membered rings, more three-membered rings, and cylindrical structures with large numbers of layers. One of the major issues in this study of the all-nitrogen molecule is the determination of what brings about the stabilizing factors. Herein, the cylinder-shaped molecule of N72 (D3d) has been studied in detail. The geometry and energies are examined at B3LYP/cc-pVDZ, and single-point energy calculations at MP2/cc-pVDZ are carried out for the purposes of determining relative thermodynamic stability. Natural bond order (NBO) analysis and atoms in molecules (AIM) analysis are applied to investigate the bonding properties of the cage molecule. The major result of this study is the identification of intramolecular interactions, whether it is at B3LYP/cc-pVDZ or at MP2/cc-pVDZ, as the dominant stabilizing factor for the large all-nitrogen cage. The length of the cylinder-shaped molecule is about 2.2 nm. N72 (D3d) might be one novel nanomaterial which is environment friendly, and as a beeline nanotube or a beeline "nano-bar", it is expected to impact a wide range of applications.     

Enantioselective synthesis of α-amino acids in chiral reverse micelles

Through alkylation of ethyl 2-phthalimidoacetate in chiral reverse micelles formed from chiral surfactants, followed by hydrazinolysis and hydrolysis of the resulting products, optically active α-amino acids were synthesized. The highest enantioselectivity was 59.5%. Meanwhile, we have found that the asymmetric induction depends on the reaction temperature, the alkyl chain length of surfactant and the strucure of the surfactants.     

Do ionic and hydrophobic probes sense similar microenvironment in Triton X-100 nonionic reverse micelles?

Rotational diffusion of two structurally similar ionic probes, rhodamine 110 and fluorescein, has been examined in nonionic reverse micellar system of Triton X-100/benzene-n-hexane/water as a function of mole ratio of the water to surfactant, W. This study has been undertaken to find out whether ionic and hydrophobic probes experience similar microenvironment in these reverse micelles. Experimental results indicate that, from W=0 to 3, the average reorientation time, which is a measure of the microviscosity experienced by the probe molecule, increases by 90% and 40% for rhodamine 110 and fluorescein, respectively, and from W=3 to 8, it decreases by 20% for both the probes. The increase in the average reorientation time with W has been rationalized on the basis of the flexible oxyethylene chains of the TX-100 surfactant being hydrogen bonded by the water molecules, which makes the core region less fluid. However, once the hydration of the oxyethylene chains is complete, further addition of water results in formation of water droplet; which renders the micelle-water interface in the core region less compact leading to a marginal decrease in the average reorientation time of the probe molecules. These explanations are consistent with the location of the probes and the structure of the Triton X-100/benzene-hexane/water reverse micelles. To compare how the microenvironment experienced by these ionic probes is different from the hydrophobic ones, results from our earlier work [J. Phys. Chem. B 108, 7944 (2004)] have been considered. Such a comparison revealed that both ionic and hydrophobic probes experience similar microenvironment in these reverse micelles until the hydration of the oxyethylene chains is complete. In case of hydrophobic probes, however, the onset of water droplet formation does not alter their microenvironment, which is due to their location in the reverse micellar cores.     

Dye J-aggregate—semiconductor nanocrystal hybrid nanostructures in reverse micelles: an experimental study

Reverse micelle solutions can be used for the assembly of hybrid nanostructures of the composition dye monomer—Ag₂S nanocrystal, dye J-aggregate—CuI nanocrystal, and dye J-aggregate—PbI₂ nanocrystal. The assembly is effected by means of adsorption of the dye (3,3′-di-(γ-sulfopropyl)-4,5,4′,5′-dibenzo-9-ethylthiacarbocyanine betaine pyridinium salt) onto the nanocrystal surface. Factors responsible for the dye adsorption onto semiconductor nanocrystals in reverse micelle solutions are analyzed. It is suggested that adsorption can be the outcome of forces induced by both van der Waals and chemical interactions. The surfactants used for stabilization of reverse micelle solutions also influence the assembly of the hybrid nanostructures.     

When is water not water? Exploring water confined in large reverse micelles using a highly charged inorganic molecular probe

The interior water pool of aerosol OT (AOT) reverse micelles tends toward bulk water properties as the micelle size increases. Thus, deviations from bulk water behavior in large reverse micelles are less expected than in small reverse micelles. Probing the interior water pool of AOT reverse micelles with a highly charged decavanadate (V(10)) oligomer using (51)V NMR spectroscopy shows distinct changes in solute environment. For example, when an acidic stock solution of protonated V(10) is placed in a reverse micelle, the (51)V chemical shifts show that the V(10) is deprotonated consistent with a decreased proton concentration in the intramicellar water pool. Results indicate that a proton gradient exists inside the reverse micelles, leaving the interior neutral while the interfacial region is acidic.     

Alkaline hydrolysis of ethylp-nitrophenyl chloromethylphosphonate in the reverse micellar AOT—decane—water system

The influence of cluster formation of micelles on the rate of alkaline hydrolysis of ethylp-nitrophenyl chloromethylphosphonate in the reverse micellar sodium bis(2-ethylhexyl) sulfosuccinate (AOT)—decane—water system was found. The applicability of the pseudo-phase model of micellar catalysis below and above the percolation threshold was shown. Translated fromIzvestiya Akademii Nauk. Seriya Khimicheskaya, No. 12, pp. 2266–2270, December, 1999.     

Fluorescence quenching of eosin upon adsorption by colloidal silver mediated in aqueous solution and reverse micelles

The optical effects of the adsorption of eosin on the colloidal silver particle have been investigated in aqueous solutions. It was found that upon adsorption the fluorescence of eosin was effectively quenched. This was explained as the photoinduced interfacial electron transfer from the excited singlet state of eosin to the silver particle. Decreasing pH of the solution favors the adsorption of eosin and so enhances the fluorescence quenching. For comparison, the fluorescence quenching in reverse micelles was also investigated. The quenching behavior was much different from that mediated in aqueous solution. This was attributed to the unique microenvironment of reverse micelles.     

Can linear micelles bridge between two surfaces?

Surfactants are extensively used as stabilizers of colloidal particles, even though the use of high surfactant concentrations can induce a loss of the stability of the dispersion. The depletion mechanism is believed to be responsible for this instability. In this paper, we show that there exists an alternative interpretation, namely that wormlike micelles can bridge between two surfaces. Such a stalk-like object connecting two adsorbed bilayers is (in first order) stable when the endcap (free) energy of the wormlike micelle (in solution) is higher than the connection (free) energy of the stalk with the surface layer. As an example, we consider an aqueous solution of nonionic C(12)E(6) surfactants and use a molecularly realistic self-consistent field approach to evaluate the free-energy of bridge formation. It appears impossible to connect linear micelles to hydrophobic surfaces onto which a monolayer of surfactants exists, and stalks only occur with an exponentially low probability for very hydrophilic surfaces. However, at a wide regime of moderately hydrophilic surfaces the stalks are thermodynamically stable. In this regime, the adsorbed bilayers are typically only marginally stable. We identify a range of parameters for which such adsorbed bilayer ruptures around the stalk and then the wormlike micelle essentially connects (head-on) to the bare surface. The strength of interaction is of the order of the endcap energy which easily exceeds 10 k(B)T. The range of interactions is expected to be large as it is set by the characteristic size of the linear micelles in solution. The regime of moderately hydrophilic surfaces is relevant experimentally, and we conclude that surfactant-induced flocculation may well be the result of stalks. The depletion mechanism is only expected for systems with extremely hydrophobic and with very hydrophilic particles.     

The photophysics of flavins: What makes the difference between gas phase and aqueous solution?

The ground and low-lying excited electronic states of isoalloxazine, 10-methylisoallox-azine and lumiflavin, three flavin-related compounds, were investigated by means of quantum chemical methods. Minimum structures were determined employing (time-dependent) Kohn–Sham density functional theory. Spectral properties were computed utilizing a combined density functional and multi-reference configuration interaction (DFT/MRCI) method. Solvent effects were mimicked by a conductor like screening model and micro-hydration with four explicit water molecules. At selected points along a linearly interpolated path connecting the Franck–Condon region and the S₁minimum, spin–orbit interaction was computed employing a nonempirical mean-field Hamiltonian. For isoalloxazine, intersystem crossing (ISC) rate constants were computed, taking both direct and vibronic spin–orbit coupling into account.On the basis of these calculations we suggest the following photo relaxation model. In the vacuum, efficient ISC takes place between the primarily excited state (S₁) and the lowest state (T₂). The energetic proximity of the state (S₂) enhances the nonradiative relaxation of S₁ by internal conversion (IC). In aqueous solution these ISC and IC channels are energetically not accessible due to the blue shift of the states. The high triplet quantum yield observed in experiment [J.T.M. Kennis, S. Crosson, M. Gauden, I.H.M. van Stokkum, K. Moffat, R. van Grondelle, Biochemistry 42 (2003) 3385–3392] is explained by the intersection between the state (S₁) potential energy hypersurface (PEH) and the second (T₂) PEH along the relaxation pathway and the strong enhancement of their spin–orbit coupling by vibronic interactions. The calculated ISC rate for this channel is in good agreement with experimental results. According to our model, lack of an efficient IC channel leads to an increased fluorescence quantum yield in aqueous solution.     

FTIR–ATR studies of water structure in reverse micelles during the synthesis of oxalate precursor nanoparticles

The structure of water in water-in-oil microemulsions used to synthesize oxalate precusor nanoparticles for the production of YBa₂Cu₃O_7−x (YBCO) superconductor powder has been studied by FTIR–ATR spectroscopy of the OH stretching band. Two initial microemulsions are mixed together and nanoparticles are formed by a precipitation reaction in the cores of the reverse micelles of the resulting microemulsion. The shapes of the water OH stretching bands for the microemulsions before and after the reaction exhibit noticeable differences when normalized at their peaks. These differences have been quantified by decomposing the water OH stretching band into three components corresponding to water molecules with different types of hydrogen bonding. In the microemulsion after the precipitation and formation of oxalate precusor nanoparticles, the structure of water is characterized with an increased fraction of bound water. These bound water molecules are also connected with stronger H-bonds. We propose that upon synthesis of the precursor nanoparticles, the observed water structure changes are due to a thin water layer formed around the newly synthesized nanoparticles.     

New insights on the photophysical behavior of PRODAN in anionic and cationic reverse micelles: from which state or states does it emit?

6-propionyl-2-(N,N-dimethyl)aminonaphtahalene, PRODAN, is widely used as a fluorescent molecular probe because of its significant Stokes shift in polar solvents. It is an aromatic compound with intramolecular charge-transfer states (ICT) that can be particularly useful as a sensor. The nature of the emissive states has not yet been established despite the detailed experimental and theoretical investigations done on this fluorophore. In this work, we performed absorption, steady-state, time-resolved fluorescence (TRES) and time-resolved area normalized emission (TRANES) spectroscopies on the molecular probe PRODAN in the anionic water/sodium 1,4-bis-2-ethylhexylsulfosuccinate (AOT)/n-heptane and the cationic water/benzyl-n-hexadecyl dimethylammonium chloride (BHDC)/benzene reverse micelles (RMs). The experiments were done by varying the surfactant concentrations at a fixed molar ratio (W = [H2O]/[Surfactant]) and changing the water content at a constant surfactant concentration. The results obtained varying the surfactant concentration at W = 0 show a bathochromic shift and an increase in the intensity of the PRODAN emission band due to the PRODAN partition process between the external solvent and the RMs interface. The partition constants, Kp, are quantified from the changes in the PRODAN emission spectra and the steady-state anisotropy () with the surfactant concentration in both RMs. The Kp value is larger in the BHDC than the AOT RMs, probably due to the interaction between the cationic polar head of the surfactant and the aromatic ring of PRODAN. The partition process is confirmed with the TRES experiments, where the data fit to a continuous model, and with the time-resolved area normalized emission spectroscopy (TRANES) spectra, where only one isoemissive point is detected. On the other hand, the emission spectra at W = 10 and 20 show a dual fluorescence with a new band that emerges in the low-energy region of the spectra, a band that was previously assigned to the PRODAN emission from the water pool of RMs. Our studies demonstrate that this band is due to the emission from an ICT state of the molecular probe PRODAN located at the interface of the RMs. These results are also confirmed by the lifetime measurements, the TRES experiments where the results fit to a two-state model, and the time-resolved area normalized emission spectroscopy (TRANES) spectra where three or two isoemissive points are detected in the AOT and BHDC RMs, respectively. In the AOT RMs, Kp values obtained at W = 10 and 20 are almost independent of the water content; the values are higher for the BHDC RMs due to the higher micropolarity of this interface.     

Can reverse micelle shells limit nanoparticle growth?

The possibility to limit the growth of nanoparticles synthesized in reverse microemulsions by the shells of reverse micelles is analyzed theoretically. At surface tension higher than about 30 mJ m⁻², the reverse micelle shells cannot inhibit the particle growth. At lower surface tension values, the particle growth can be limited, but the synthesized particles should be much larger than the initial micelles.     

What makes for a good catalytic cycle? A theoretical study of the SPhos ligand in the Suzuki-Miyaura reaction

The Suzuki-Miyaura cross-coupling reaction with the SPhos ligand was studied with DFT and analyzed within the energetic span model. With this information, we designed a modification to the SPhos (the "InPhos"), which theoretically corrects the deficiencies of the prior ligand.