First detection of the Cs symmetric isomer of carbon hexaoxide (CO6) at 10 K

Carbon oxides of the form CO_n (n = 2–8) have long been known as important molecules in atmospheric and solid state chemical reactions. Here, we report on the first infrared spectroscopic detection of the cyclic (C_s) isomer of carbon hexaoxide (¹²C¹⁶O₆) via its ν₁ vibrational mode centered around 1876 cm⁻¹ under matrix isolation conditions; the identification of the ¹²C¹⁸O₆, ¹³C¹⁶O₆, and ¹³C¹⁸O₆, isotopologues supported by ab initio calculations confirm the assignments. We also discuss possible formation routes of this molecule.     

A density functional study on hydrated clusters of orthoboric acid, B(OH)3(H2O)n (n=1–5)

We have calculated the optimized structures and stabilization energies for hydrated clusters of orthoboric acid molecule, B(OH)₃(H₂O)_n (n=1–5), with a hybrid density functional approach. Although some ion-pair structures are revealed in the case of n=4 and 5 clusters, the most stable structure is found to be a non-proton-transferred form up to n=5 hydrated clusters. The calculated IR spectra of the stable B(OH)₃(H₂O)_n of n=3–5 clusters predict small red shifts of hydrogen-bonded OH frequencies. These geometry and IR results are related to the weak acidity nature of orthoboric acid.     

Comparative characteristics of texture and properties of hybrid organic–inorganic adsorbents functionalized by amine and thiol groups

The structure and texture characteristics of the hybrid organic–inorganic adsorbents, which were obtained by using of two-component systems of “structure-forming agent/trifunctional silane”, are compared as follows: the first component is Si(OC₂H₅)₄ or (C₂H₅O)₃Si–A–Si(OC₂H₅)₃, where A = –(CH₂)₂– or –C₆H₄–; the second one is alkoxysilane with amine (–NH₂, NH, –NH(CH₂)₂NH₂) and thiol (–SH) groups. The adsorbents, derived from TEOS, have more accessible functional groups (2.6–4.2 mmol/g) than xerogels, which are based on bis(triethoxysilanes) (1.0–2.6 mmol/g). On another hand xerogels derived from bis(triethoxysilanes) have a more extended porous structure (S_sp =516–968 m²/g, V_s = 0.418–1.490 cm³/g, d = 2.5–15.0 nm) than those that are based on TEOS (S_sp = 4–631 m²/g, V_s = 0.005–1.382 cm³/g, d = 2.3–17.7 nm). The geometric dimensions of functional groups have a more essential effect on the parameters of porous structure in the case of TEOS-derived xerogels. Using solid-state NMR spectroscopy, it has been shown that in synthesis of xerogels with the use of TEOS, the molecular frame of globules is formed by structural units Qⁿ (n = 2,3,4), and the functional groups exist as structural units of Tⁿ (n = 2,3). The xerogels obtained with using bis(triethoxysilanes) consist only of structural units of Tⁿ-type (n = 1,2,3).     

Complexes of cationic coinage metal clusters Mn (M=Cu, Ag, Au; n=1–4) and H2S: a theoretical study

Geometries and vibrational frequencies of complexes of cationic coinage metal clusters M_n⁺ (M=Cu, Ag, Au; n=1–4) and H₂S are computed using density functional theory. Thermochemical values for M_n⁺H₂S decomposition channels involving loss of an H atom, H₂ molecule, M atom, or M₂ molecule are also computed. Significantly different results are obtained for closed-shell (n odd) and open-shell (n even) complexes.     

The crystal structure of (η-C6Me6)Ti[(μ-Cl)2(AlClEt)]2 and the catalytic activity of the (C6Me6)TiAl2Cl8−xEtx(x = 0---4) complexes towards butadiene

The composition of (C₆Me₆)TiAl₂Cl_8−xEt_x complexes in (C₆Me₆)TiAl₂Cl₈ + n Et₃Al (n = 0.5-6) systems was studied by UV-Vis spectroscopy and the X-ray crystal structure of one of them, (η⁶-C₆Me₆)Ti[(μ-Cl)₂(AlClEt)]₂ (IIa-2), has been determined. The complex crystallizes in the orthorhombic space group Pna2₁ with Z = 4 and lattice parameters a 15.634(3), b 11.355(2), c 14.417(2) Å. The ethyl groups of IIa-2 reside in outer positions of aluminate ligands farther away from the C₆Me₆ ligand. The other part of the complex does not differ remarkably from structures of other (arene)Ti^II complexes. Negligible activity of (C₆Me₆)TiAl₂Cl₈ towards the butadiene cyclotrimerization is considerably increased by addition of 2.5–3.0 equivalents of Et₃Al. As follows from UV-Vis spectra, such systems contain mainly the (C₆Me₆)TiAl₂Cl₅Et₃ complex. It is suggested that the introduction of three Et substituents destabilizes the Ti-(η⁶-C₆Me₆) bond so that the replacement of hexamethylbenzene by butadiene in the first step of a catalytic cycle becomes more feasible.     

Constructions of a set of novel hydrogen-bonded supramolecules from reactions of cobalt(II) salt with bis(3,5-dimethylpyrazolyl)methane and different carboxylic acids

Reactions of CoX₂·6H₂O (X = Cl⁻, ClO₄⁻) with bis(3,5-dimethylpyrazolyl)methane (dmpzm) and formic acid, acetic acid, benzoic acid, salicylic acid, maleic acid, or fumaric acid under the presence of KOH solution produced a new family of Co(II)/dmpzm complexes, [Co(dmpzm)₂L]X·nH₂O (1: L = O₂CH, X = Cl, n = 2; 2: L = OAc, X = Cl, n = 3; 3: L = benzoate, X = ClO₄, n = 1/3; 4: L = salicylate, X = ClO₄, n = 1/3) and [Co₂(dmpzm)₄L](ClO₄)₂·nSolv (5: L = maleate, n = 3, Solv = H₂O; 6: L = fumarate, n = 2, Solv = MeOH). These compounds were structurally characterized by elemental analysis, IR spectroscopy, and single-crystal X-ray diffraction. Compounds 1–4 are mononuclear while 5–6 are binuclear. Each cobalt atom of 1–6 is hexacoordinate, with a distorted octahedral CoN₄O₂ coordination geometry incorporating two N,N′-bidentate dmpzm ligands and one O,O′-bidentate carboxylate ligand. There are rich intra- and intermolecular hydrogen bonds in the crystals of 1–6, thereby forming either 2D hydrogen-bonded networks (1 and 2) or 3D hydrogen-bonded networks (3–6). In addition, the thermal behaviors of 1–6 were also investigated.     

Phase equilibria and crystal structure of the solid solution LaFe1−xNixO3−δ (0 ≤ x ≤ 1)

Phase equilibria in the LaFeO₃–“LaNiO₃” were studied at 1100 °C in air. The samples were synthesized by standard ceramic and/or solution route via nitrate or citrate precursors. According to the results of XRD it was found that the homogeneity ranges of LaFe_1−xNi_xO_3−δ solid solution lay within 0.0 ≤ x ≤ 0.4 (sp.gr. Pbnm) and 0.6 ≤ x ≤ 0.8 (sp.gr. ). The structural parameters (bond lengths, atom coordinates) for the single-phase samples were refined using Rietveld analysis. The unit cell parameters versus LaFe_1−xNi_xO_3−δ composition are presented.     

First principles study of the structure, electronic state and stability of SinCm anions

Structure, electronic state and energy of Si_nC⁻ and Si_nC⁻₂ (n=1–7) anions have been investigated using the density functional theory. Structural optimization and frequency analysis are performed at the level B3LYP/6-311G(d). The charged-induced structural changes in these anions have been discussed. The strong C–C bond is also favored over C–Si bonds in the Si_nC⁻_m anions in comparison with corresponding neutral cluster. Among different Si_nC⁻ and Si_nC⁻₂ (n=1–7) anions, Si₃C⁻, Si₅C⁻ and Si₂C⁻₂ are most stable. Their stability has a decreasing tendency with the increase in the size of these clusters.     

Ab initio study on the kinetics and mechanisms of the formation of Agn (n = 2–6) clusters

The CCSD(T)/11e-RECP//MP2/11e-RECP method was used to explore the potential energy surfaces (PESs) of the formation of Ag_n (n = 2–6) clusters. Two kinds of reaction mechanisms were revealed in the formation of Ag_n clusters, the association mechanism for the formation of Ag₂, Ag₅, and Ag₆ clusters and the association–isomerization mechanism for the formation of Ag₃ and Ag₄ clusters. Based on the canonical transition state theory, the calculated rate constants of the formation of Ag_n clusters displayed an odd–even effect: the rate constants of formation of Ag_n clusters with odd number were larger than those with even number. The rate constant of formation of Ag₄ was the lowest, whereas that of Ag₅ was the highest among Ag_n (n = 2–6) clusters. The formation of Ag₄ was the most difficult step in the aggregation process of the silver clusters. The formation of Ag₄ may be related with the critical point in the silver aggregation process.     

First principles study of the structure, electronic state and stability of AlnPm cations

Structural and electronic properties of semiconductor binary microclusters Al_nP_m⁺ cations have been investigated using the B3LYP–DFT method in the ranges of n=1,2 and m=1–7. Full structural optimization, adiabatic ionization potentials calculation and frequency analysis are performed with the basis of 6-311G(d). The charge-induced structural changes in these cations have been discussed. The strong P–P bond is also favored over Al–P bonds in the Al_nP_m⁺ cations in comparison with corresponding neutral cluster. With P_m forming the base, adding Al atom(s) in different positions would find the stable structures of Al_nP_m⁺ cations quickly and correctly. Both AlP₄⁺ and AlP₆⁺ are predicted to be species with high stabilities and possible to be produced experimentally.     

Polarized absorption spectra and polarized Raman spectra of single crystals of trans(Cl2)-[CoCl2(NH3)n(H2O)4−n]Cl complexes (n = 2, 3, 4)

The title cobalt(III) complexes have been investigated by polarized absorption and Raman spectroscopies of the single crystals. The symmetry properties of the d-electron orbitals and of the vibrational modes attributable to the Raman bands of trans(Cl₂)-[CoCl₂(NH₃)_n(H₂O)_4−n]Cl complexes (n = 2, 3, or 4) were examined to elucidated the peculiar observation that ligand substitution causes no splitting of the 15 200-cm⁻¹ absorption band and the 250-cm⁻¹ Raman band. Effects of replacing the NH₃ ligand with H₂O on the electronic structure, atom–atom force constants and vibrational modes of these complex ions are briefly described.     

FT-IR and Raman spectroscopic study of di-urea cross-linked poly(oxyethylene)/siloxane ormolytes doped with Zn ions

The interactions occurring in di-urea (NHC(O)NH) cross-linked poly(oxyethylene) (POE)/siloxane hybrids (di-ureasils) doped with zinc triflate (Zn(CF₃SO₃)₂) were investigated by Fourier Transform infrared (FT-IR) and Raman (FT-Raman) spectroscopies. Bonding of the Zn²⁺ ions to the urea carbonyl oxygen atoms occurs in the entire range of compositions studied (∞ > n ≥ 1, where n, salt content, is the molar ratio of oxyethylene moieties per Zn²⁺ ion). At n > 20 the incorporation of the guest cations progressively reduces the number of free CO groups. At n = 20 the saturation of the urea cross-links is attained and the Zn²⁺ ions start to coordinate to the POE chains giving rise to the formation of a crystalline POE/Zn(CF₃SO₃)₂ complex. The latter process occurs at the expense of the destruction of the hydrogen-bonded POE/urea structures of the host di-ureasil structure. New hydrogen-bonded associations, more ordered than the urea–urea aggregates present in the non-doped matrix and including Zn²⁺OC coordination, emerge in parallel. “Free” and weakly coordinated CF₃SO₃⁻ ions, present in all the xerogels studied, appear to be the main charge carriers of the conductivity maximum of this family of ormolytes located at n = 60 at 30 °C. In materials with n ≤ 20 contact ion pairs, “cross-link separated” ions pairs and higher ionic aggregates appear. The data reported demonstrate that the behaviour of the di-ureasils doped with triflate salts depends on the type of cation.     

Strong antiferromagnetism in the dinuclear 2-pyridone complex with N–C–O bridges: A paddle-wheel analogue of the dinuclear tetracarboxylates

A novel dinuclear complex [Cu₂(μ-L)₄(HL)₂] (1) was isolated from starting 2-pyridone (HL) via a resonance and a tautomeric transformation. Each copper centre is in a square-pyramidal coordination sphere, defined by two oxygen atoms (Cu–O4 1.978(5), Cu–O11 1.964(4) Å) and two nitrogen atoms (Cu–N2 2.003(5), Cu–N3 2.007(5) Å) of four bridging deprotonated pyridin-2-olates and an oxygen atom on the top from a neutral 2-pyridone (Cu–O2 2.227(5) Å), analogous to tetracarboxylate paddle-wheel complexes. Compound 1 was compared with mixed pyridin-2-olato/methanoato analogues [Cu₂(μ-HCO₂)₂(μ-L)₂(HL)₂] · 2CH₃CN (2) and [Cu₂(μ-HCO₂)₂(μ-L)₂(HL)₂] (2a) (2a is an air stable form obtained from 2 outside mother-liquid). The EPR spectra of air stable 1 and 2a show three signals H_z1, H₂ and H_z2, typical for the binuclear systems with spin S = 1, both revealing strong antiferromagnetism 2J = −334 (1) and −324 cm⁻¹ (2a). Interestingly, only for 1 additional H₁ signal at 100 mT is noticed (D(1) = 0.293 cm⁻¹ < hν = 0.320 cm⁻¹ < D(2a) = 0.347 cm⁻¹). On the other hand, several broad signals in the 100–450 mT region, only in the high temperature spectrum for 2a are observed. These results are in agreement with the magnetic susceptibility analysis.     

New P–Se compounds from the reaction of 2,4-bis(phenyl)-1,3-diselenadiphosphetane-2,4-diselenide with alkyl-diols

Reaction of alkyl-diols [HO(CH₂)_nOH, n=2–6, 8 and 10] with 2,4-bis(phenyl)-1,3-diselenadiphosphetane-2,4-diselenide [(PhP(μ-Se)Se)₂ Woollins' reagent, WR] in dry dichloromethane gave a series of bisdiselenophosphonic acids at room temperature. Treatment of the acids with butylamine in tetrahydrofuran afforded the corresponding ammonium salts 1–7 in excellent yields (91–97%). Esterification of the salts with methyl iodide led to Se,Se-dimethyl esters 8–14 in medium to excellent yields (50–86%). Alternatively, heating the toluene solution of alkyl-diols [HO(CH₂)_nOH, n=2–4] and WR at reflux, afforded 1,3,2-dioxaphosphorinane-2-phenyl-2-selenides 16, 18 and 20 in reasonable to good yield. Meanwhile, when 1,2-ethylene glycol was used, a heterocycle containing a selenium atom, 2,4-bisphenyl-2,4-diseleno-1,5-dioxa-3-seleno-2,4-diphosphetane 15 was formed. In the case of 1,3-propanediol or 1,4-butanediol, the heterocycles containing two neighbouring selenium atoms, 2,5-diphenyl-(1,6,3,4,2,5)-dioxadiselenadiphosphocane-2,5-disulfides 17 and 19 were obtained together with 18 and 20. Perhaps due to a steric effect, pinacol and WR in toluene at reflux gave 1,3,2-dioxaphosphorinane-2-selenide 21 as the only product. One representative X-ray crystal structure of an ammonium salt is described.     

Theoretical investigation on the adsorption of lithium atom on the Sin cluster (n=2–7)

Ab initio calculations are carried out to study the adsorption of Lithium atom on the Si_n cluster with n ranging from 2 to 7. At the MP2/6-31G(d) level, the structures of the neutral Si_n clusters and the Si_nLi clusters (n=2–7) are optimized. The single-point energy at QCISD/6-311+G(d,p) level for the optimized isomers are further performed. Harmonic vibrational frequency analysis at the MP2/6-31G(d) level is also undertaken to confirm that the optimize geometries are stable. Based on our results, the most favorable sites for Li adsorption on the Si_2–7 clusters are the bridge sites. In addition, the vertical ionization energies of the Si_nLi clusters and the electron affinities of the Si_n clusters are also calculated. The clear parallelism between the vertical ionization energies of Si_nLi and the electron affinities of Si_n is found. This is consistent with the fact that the framework of the Si_n in the Si_nLi cluster is similar to the structure of the corresponding negative ion .     

Crystalline polysilicate magadiite with intercalated n-alkylmonoamine and some correlations involving thermochemical data

Synthesized hydrated lamellar acidic crystalline magadiite (H₂Si₁₄O₂₉·2H₂O) nanocompound was used as host for intercalation of polar n-alkylmonoamine molecules of the general formula H₃C(CH₂)_nNH₂ (n = 1–6) in aqueous solution. The original interlayer distance (d) of 1500 pm, determined by X-ray powder diffraction patterns, increases after intercalation. The values correlated with the number of aliphatic amine carbon (n_c) atoms: d = [(1312 ± 11) + (21 ± 2)]n_c. The amount of intercalated amines (N_s), decreased as n_c increased: N_s = [(5.82 ± 0.04) − (0.45 ± 0.01)]n_c. The acidic layered nanocompound was calorimetrically titrated with the amines and the thermodynamic data gave exothermic values for all guest molecules, as shown by the correlation: Δ_intH = −[(24.45 ± 0.49) − (1.91 ± 0.10)]n_c and d = [(1576 ± 16) − (10.8 ± 1.0)]Δ_intH. The negative values of the Gibbs energies and the positive entropies also presented the correlations: Δ_intG = −[(22.8 ± 0.2) − (0.2 ± 0.1)]n_c and Δ_intS = [(6 ± 1) + (5 ± 1)]n_c, respectively.     

An ab initio study on the vibrational and electronic spectra of the molybdenum–sulfur clusters with Mo2OnS4−n(n=0–4) core

Using the ab initio method, the vibrational and electronic spectra of binuclear molybdenum clusters which contain Mo₂O_nS_4−n(n=0–4) core were investigated. The main absorption bands in the IR spectra of these clusters are assigned and compared with each other, especially for the case of the trans isomers. The electronic spectra were studied by performing the CIS calculations. The ground state and the first excited state of the clusters were discussed by using the natural bond orbital method. It is shown that the band corresponding to the longest wavelength can be assigned to three kinds of transition types. Two transitions, σ(Mo–Mo)→π*(Mo–X_t)(X=S,O) and σ(Mo–Mo)→σ*(Mo–Mo), can be seen in most cases.     

A theoretical study of protonated OCnOH ions, n=3–8

Since ion-neutral reactions are a major component of the processes driving interstellar chemistry, most reaction network include protonated species. Besides, these ions are able to initiate chemical processes that would not occur with their neutral parents. In this contribution we report a systematic study of the protonated adducts of the OC_nO series (n=3–8) using the B3LYP level of theory. The structures of all possible O-protonated and C-protonated isomers of [OC_nOH⁺] have been determined together with their rotational constants, vibrational frequencies and intensities. Although it appears that these ions belong to two different series, odd-n and even-n, it is found that protonation occurs at the carbons second to the terminal oxygens for all n. The most stable structure is found to be the singlet ion whatever the singlet or triplet spin state of the parent species. However, due to the lack of efficient spin–orbit coupling, only the odd series [OC_nOH⁺] with n=3,5,7 should be formed on the singlet ground state surface. Analysis of the infrared intensities shows that the spectra are dominated by only one or two very strong bands (CC stretching) that carry most of the overall intensity in the 2200–2350 cm⁻¹ region.     

Length dependence of coherent electron transportation in metal–alkanedithiol–metal and metal–alkanemonothiol–metal junctions

We have applied the elastic-scattering Green’s function theory to study the coherent electron transportation processes in both metal–alkanedithiol–metal (gold–[S(CH₂)_nS]–gold, n = 8–14) and metal–alkanemonothiol–metal (gold–[H(CH₂)_nS]–gold, n = 8–14) at the hybrid density functional theory level. It is shown that the current decreases exponentially with the molecular length. At the low temperature limit the electron decay rate, β, for alkanedithiol junction is found to be around 0.30/CH₂ at 1.0 V bias, much smaller than the calculated value of 0.60/CH₂ for alkanemonothiol junction. The decay rate for alkanedithiol junction at the room temperature is neither sensitive to the activation of the Au–S stretching vibrational mode nor to the external bias. The calculated current–voltage characteristics and decay rates for both junctions are in excellent agreement with the corresponding experimental results.     

Structures of 3,3′-dicarbometoxy-2,2′-bipyridine complexes with silver(I) and copper(II) cations

The structures of 3,3′-dicarbometoxy-2,2′-bipyridine (dcmbpy) complexes with copper(II) and silver(I) cations have been determined using single crystal X-ray-diffraction. The crystals of Cu(dcmbpy)Cl₂ are monoclinic, C2/c, a = 16.966(3), b = 18.373(3), c = 13.154(2) Å, β = 126.543(3)°. The crystals of Ag(dcmbpy)NO₃ · H₂O are also monoclinic, C2/c, a = 16.7547(13), b = 11.0922(9), c = 18.7789(18) Å, β = 100.228(7)°. The results have been compared with the literature data on the complexes of dcmbpy and its precursors: 2,2′-bipyridine (bpy) and 3,3′-dicarboxy-2,2′-bipyridine (dcbpy). Two types of complexes of 3,3′-carboxy derivatives of bpy are distinguished: (1) with metal atom bonded to two N atoms of the same molecule and (2) with metal atom bonded to two N atoms of two different molecules. The Cu(dcmbpy)Cl₂ complex belongs to the first type, whereas Ag(dcmbpy)NO₃ · H₂O belongs to the second type.