A fluorescent chemosensor for Hg based on naphthalimide derivative by fluorescence enhancement in aqueous solution

Naphthalimide derivative (compound 1) containing hydrophilic hexanoic acid group was synthesized and used to recognize Hg²⁺ in aqueous solution. The fluorescence enhancement of 1 is attributed to the formation of a complex between 1 and Hg²⁺ by 1:1 complex ratio (K = 2.08 × 10⁵), which has been utilized as the basis of fabrication of the Hg²⁺-sensitive fluorescent chemosensor. The comparison of this method with some other fluorescence methods for the determination of Hg²⁺ indicated that the method can be applied in aqueous solution rather than organic solution. The analytical performance characteristics of the proposed Hg²⁺-sensitive chemosensor were investigated. The chemosensor can be applied to the quantification of Hg²⁺ with a linear range covering from 2.57 × 10⁻⁷ to 9.27 × 10⁻⁵ M and a detection limit of 4.93 × 10⁻⁸ M. The experiment results show that the response behavior of 1 toward Hg²⁺ is pH independent in medium condition (pH 4.0–8.0). Most importantly, the fluorescence changes of the chemosensor are remarkably specific for Hg²⁺ in the presence of other metal ions, which meet the selective requirements for practical application. Moreover, the response of the chemosensor toward Hg²⁺ is fast (response time less than 1 min). In addition, the chemosensor has been used for determination of Hg²⁺ in hair samples with satisfactory results, which further demonstrates its value of practical applications.     

Ratiometric chemosensor for fluorescent determination of Zn2+ in aqueous ethanol

A new ratiometric and selective fluorescent chemosensor (1) for quantification of zinc ions in aqueous ethanol has been synthesized and investigated in this work. In an environmentally friendly media of 30% (v/v) water/ethanol and 10 mM Tris-HCl neutral buffer (pH 7.03), 1 displayed selective Zn²⁺ ratiometric fluorescence response, with a dynamic working range of 1.0-8.0 μM and a detection limit of 0.5 μM Zn²⁺. The determination of Zn²⁺ in synthesized water sample was also successful.     

Selective turn-on fluorescence for Zn and Zn + Cd metal ions by single Schiff base chemosensor

Chemosensor based on Schiff base molecules (1, 2) were synthesized and demonstrated the selective fluoro/colorimetric sensing of multiple metal ions (Mn²⁺, Zn²⁺ and Cd²⁺) in acetonitrile–aqueous solution. Both 1 and 2 showed a highly selective naked-eye detectable colorimetric change for Mn²⁺ ions at 10⁻⁷ M. Fluorescence sensing studies of 1 and 2 exhibited a strong fluorescence enhancement (36 fold) selectively upon addition of Zn²⁺ (10⁻⁷ M, λ_max = 488 nm). Fluorescence titration and single crystal X-ray analysis confirmed the formation of 1:1 molecular coordination complex between 1 and Zn²⁺. Interestingly, a rare phenomenon of strong second turn-on fluorescence (190 fold, λ_max = 466 nm) was observed by the addition of Cd²⁺ (10⁻⁷ M) into 1 + Zn²⁺ or Zn²⁺ (10⁻⁷ M) into 1 + Cd²⁺. Importantly both 1 and 2 exhibited different fluorescence λ_max with clearly distinguishable color for both Zn²⁺ and Cd²⁺.     

Highly selective fluorescent sensing of Cu ion by an arylisoxazole modified calix[4]arene

A novel fluorescent chemosensor 1 with two anthraceneisoxazolymethyl groups at the lower rim of calix[4]arene has been synthesized, which revealed a dual emission (monomer and excimer) when excited at 375 nm. This chemosensor displayed a selective fluorescence quenching only with Cu²⁺ ion over all other metal ions examined. When Cu²⁺ ion was bound to 1, the fluorescence intensities of both monomer and excimer were quenched. Furthermore, the association constant for the 1:1 complex of 1·Cu²⁺ was determined to be (1.58 ± 0.03) × 10⁴ M⁻¹.     

A turn-on and reversible fluorescence sensor with high affinity to Zn in aqueous solution

A new simple receptor 1 based on aminosalicylimine was prepared. It exhibited an ‘off–on fluorescence type’ mode with high sensitivity in the presence of Zn²⁺. In particular, this chemosensor could clearly distinguish Zn²⁺ from Cd²⁺. Also, it could be a reusable chemosensor because the addition of EDTA quenched the fluorescence of the Zn²⁺-2·1 complex. Furthermore, receptor 1 had a sufficiently low detection limit (68 nM) in aqueous solutions, which implies that 1 could sense the nanomolar concentration of Zn²⁺. Therefore, this sensor has the ability to be a practical system for the monitoring of Zn²⁺ concentrations in aqueous samples.     

A highly selective fluorescent probe for Hg based on a rhodamine-coumarin conjugate

A fluorescent probe 1 for Hg²⁺ based on a rhodamine-coumarin conjugate was designed and synthesized. Probe 1 exhibits high sensitivity and selectivity for sensing Hg²⁺, and about a 24-fold increase in fluorescence emission intensity is observed upon binding excess Hg²⁺ in 50% water/ethanol buffered at pH 7.24. The fluorescence response to Hg²⁺ is attributed to the 1:1 complex formation between probe 1 and Hg²⁺, which has been utilized as the basis for the selective detection of Hg²⁺. Besides, probe 1 was also found to show a reversible dual chromo- and fluorogenic response toward Hg²⁺ likely due to the chelation-induced ring opening of rhodamine spirolactam. The analytical performance characteristics of the proposed Hg²⁺-sensitive probe were investigated. The linear response range covers a concentration range of Hg²⁺ from 8.0 × 10⁻⁸ to 1.0 × 10⁻⁵ mol L⁻¹ and the detection limit is 4.0 × 10⁻⁸ mol L⁻¹. The determination of Hg²⁺ in both tap and river water samples displays satisfactory results.     

Synthesis of a sugar-aza-crown ether-based cavitand as a selective fluorescent chemosensor for Cu ion

A chemosensor based upon the sugar-aza-crown ether 7 with one anthracenetriazolymethyl moiety was prepared and its fluoroionophoric properties toward transition metal ions were investigated. Chemosensor 7 exhibits highly selective recognition toward Cu²⁺ ion among a series of tested metal ions in MeOH solution. The association constant for 7∗Cu²⁺ in MeOH solution was calculated to be 2.5 × 10⁴ M⁻¹.     

Highly selective and sensitive fluorescent chemosensor for Hg in aqueous solution

A new indole-based fluorescent chemosensor 1 was prepared and its metal ion sensing properties were investigated. It exhibits high sensitivity and selectivity toward Hg²⁺ among a series of metal ions in H₂O-EtOH (7:1, v/v). The association constant of the 1:1 complex formation for 1-Hg²⁺ was calculated to be 9.57 × 10³ M⁻¹, and the detection limit for Hg²⁺ was found to be 2.25 × 10⁻⁵ M. Computational results revealed that 1 and Hg²⁺ ion formed with a central tetrahedron-coordinated Hg²⁺.     

A new turn-on fluorescence probe for Zn in aqueous solution and imaging application in living cells

We designed and synthesized a new pyrazoline-based turn-on fluorescence probe for Zn²⁺ by the reaction of chalcone and thiosemicarbazide. The structure of the probe was characterized by IR, NMR and HRMS spectroscopy. The probe (L) exhibits high selectivity and sensitivity for detecting Zn²⁺ in buffered EtOH/HEPES solution (EtOH/HEPES = 1/1, pH 7.2) with 80-fold fluorescence enhancement, which is superior to previous reports. Job’s plot analysis revealed 1:1 stoichiometry between probe L and Zn²⁺ ions. The association constant estimated by the Benesi–Hildebrand method and the detection limit were 3.92 × 10³ M⁻¹ and 5.2 × 10⁻⁷ M, respectively. A proposed binding mode was confirmed by ¹H NMR titration experiments and density functional theory (DFT) calculations. The probe is cell-permeable and stable at the physiological pH range in biological systems. Because of its fast response to Zn²⁺, the probe can monitor Zn²⁺ in living cells. Moreover, the selective binding of L and Zn²⁺ was reversible with the addition of EDTA in buffered EtOH/HEPES solution and Zn²⁺ could be imaged in SH-SY5Y neuron cells.     

Mono- and oligosaccharide sensing by phenylboronic acid-appended 5,15-bis(diarylethynyl)porphyrin complexes

Porphyrin derivatives bearing a pair of boronic acid groups (1, 1·Zn, and 1·Cu) were designed and synthesized from 2 to construct a saccharide sensing system. Compounds 1, 1·Zn, and 1·Cu have a diethynyl porphyrin rotational axis, which is expected to act as a saccharide-binding modulator. Saccharide binding studies were conducted by UV-vis, fluorescence, and circular dichroism (CD) spectroscopies. In a water-methanol 1:1 (v/v) mixed solvent, we have found that 1·Zn can bind mono- and oligosaccharides including Lewis oligosaccharides to produce 1:1 host-saccharide complexes with the association constants of 10²−10³ M⁻¹ range. This paper thus demonstrates a new principle to design a boronic acid-based saccharide receptor.     

Fluorogenic dual click derived bis-glycoconjugated triazolocoumarins for selective recognition of Cu(II) ion

Carbohydrate based fluorescent sensors S1 and S2 have been developed by fluorogenic dual click chemistry and are characterized by various spectroscopic techniques. Both the fluorescent probes displayed highly selective detection of Cu²⁺ ions by means of fluorescence quenching. The job plot experiment suggested 1:1 complexation of probes S1 and S2 with Cu²⁺ ions having detection limit of 6.99 μM and 7.30 μM, respectively. The binding constants for S1-Cu²⁺ and S2-Cu²⁺ complexation were evaluated to be 3.34 × 10³ M⁻¹ and 5.93 × 10³ M⁻¹, respectively.     

Ratiometric near-infrared chemosensor for trivalent chromium ion based on tricarboyanine in living cells

A tricarboyanine derivative (IRPP) is applied as a ratiometric near-infrared chemosensor for detecting trivalent chromium ions (Cr³⁺) in living cells. Upon the addition of Cr³⁺ to a solution of IRPP, large-scale shifts in the emission spectrum (from 755 nm to 561 nm) are observed. In the newly developed sensing system, these well-resolved emission peaks yield a sensing system that covers a linear range from 1.0 × 10⁻⁷ to 1.0 × 10⁻⁵ M with a detection limit of 2.5 × 10⁻⁸ M. The experimental results show the response behavior of IRPP towards Cr³⁺ is pH independent under neutral conditions (6.0–7.5). Most importantly, the fast response time (less than 3 min) and selectivity for Cr³⁺ over other common metal ions provide a strong argument for the use of this sensor in real world applications. As a proof of concept, the proposed chemosensor has been used to detect and quantify Cr³⁺ in river water samples and to image Cr³⁺ in living cells with encouraging results.     

Fluorescence properties of polyamines bearing two terminal quinoline fragments in water

Fluorescence properties of polyamines bearing two terminal quinoline fragments with different polyamine chain length, such as ethylenediamine (L0), diethylenetriamine (L1), and triethylenetetramine (L2), have been studied in water. These ligands show Zn²⁺-induced fluorescence enhancement, while showing almost no enhancement with other cations. However, stability constants for Zn²⁺ coordination and fluorescence response against Zn²⁺ depend strongly on the polyamine chain length. The chain length also affects the fluorescence wavelength. The Zn²⁺-L1 and Zn²⁺-L2 complexes show emission at 410 nm, while Zn²⁺-L0 complexes show a blue-shifted emission at 375 nm due to the partial charge transfer from the excited state quinoline to the Zn²⁺ center.     

2-Oxazoline/benzoxazole-1,10-phenanthrolinylmetal (iron, cobalt or nickel) dichloride: Synthesis, characterization and their catalytic reactivity for the ethylene oligomerization

Series of 2-benzoxazole-1,10-phenanthrolines (L1-L4) and 2-oxazoline-1,10-phenanthrolines (L5-L8) were synthesized and used as tridentate N^N^N ligands in coordinating with metal (nickel, cobalt or iron) chlorides. Their metal complexes, nickel(II) (Ni1-Ni8), cobalt(II) (Co1-Co8) and iron(II) (Fe1-Fe8), were characterized by elemental and IR spectroscopic analyses. The molecular structures of the ligand L2 and the complexes Ni3, Co1, Co3 and Fe2 have been determined by the single-crystal crystallography. The nickel complex Ni3 and iron complex Fe2 display an octahedral geometry, whereas cobalt complex Co1 is with a distorted bipyramidal geometry and Co3 as square pyramidal geometry. At 10 atm ethylene, all the complexes showed good activities in ethylene dimerization upon activation with appropriate aluminum cocatalysts; the nickel complexes gave the activity up to 3.11 × 10⁶ g mol⁻¹(Ni) h⁻¹ upon activation with diethylaluminum chloride (Et₂AlCl), meanwhile the cobalt and iron complexes showed activities up to 1.51 × 10⁶ g mol⁻¹(Co) h⁻¹ and 1.89 × 10⁶ g mol⁻¹(Fe) h⁻¹, individually, upon activation with modified methylaluminoxane (MMAO).     

A highly selective and sensitive fluorescein-based chemodosimeter for Hg2+ ions in aqueous media

A new fluorescein-based chemodosimeter (II) for Hg²⁺ ion was designed and synthesized, and it displayed excellent selective and sensitive toward Hg²⁺ ion over other commonly metal ions in aqueous media. II was a colorless, non-fluorescent compound. Upon addition of Hg²⁺ to the solution of II, the thiosemicarbazide moiety of II would undergo an irreversible desulfurization reaction to form its corresponding oxadiazole (IV), a colorful and fluorescent product. During this process, the spirocyclic ring of II was opened, causing instantaneous development of visible color and strong fluorescence emission in the range of 500-600 nm. Based on the above mechanism, a fluorogenic Hg²⁺-selective chemodosimeter was developed. The fluorescence increase is linearly with Hg²⁺ concentration up to 1.0 μmol L⁻¹ with a detection limit of 8.5 × 10⁻¹⁰ mol L⁻¹ (3σ). Compared with the rhodamine-type chemodosimeter, II is more stable in aqueous media and exhibits higher sensitivity toward Hg²⁺. The findings suggest that II will serve as a practical chemodosimeter for rapid detection of Hg²⁺ concentrations in realistic media.     

"Off-On" based fluorescent chemosensor for Cu2+ in aqueous media and living cells

A novel Cu²⁺-specific “off-on” fluorescent chemosensor of naphthalimide modified rhodamine B (naphthalimide modified rhodamine B chemosensor, NRC) was designed and synthesized, based on the equilibrium between the spirolactam (non-fluorescence) and the ring-opened amide (fluorescence). The chemosensor NRC showed high Cu²⁺-selective fluorescence enhancement over commonly coexistent metal ions or anions in neutral aqueous media. The limit of detection (LOD) based on 3 × δ_blank/k was obtained as low as 0.18 μM of Cu²⁺, as well as an excellent linearity of 0.05-4.5 μM (R = 0.999), indicating the chemosensor of high sensitivity and wide quantitation range. And also the coordination mode with 1:1 stoichiometry was proposed between NRC and Cu²⁺. In addition, the effects of pH, co-existing metal ions and anions, and the reversibility were investigated in detail. It was also demonstrated that the NRC could be used as an excellent “off-on” fluorescent chemosensor for the measurement of Cu²⁺ in living cells with satisfying results, which further displayed its valuable applications in biological systems.     

A highly selective turn-on fluorescent chemosensor for copper(II) ion

A new pyrene derivative (1) containing a diaminomaleonitrile moiety exhibits high selectivity for Cu²⁺ detection. Significant fluorescence enhancement was observed with chemosensor 1 in the presence of Cu²⁺. However, the metal ions Ag⁺, Ca²⁺, Cd²⁺, Co²⁺, Fe²⁺, Fe³⁺, Hg²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Pb²⁺, and Zn²⁺ produced only minor changes in fluorescence values for the system. The apparent association constant (K_a) of Cu²⁺ binding in chemosensor 1 was found to be 5.55×10³ M⁻¹. The maximum fluorescence enhancement caused by Cu²⁺ binding in chemosensor 1 was observed over the pH range 5-7.5.     

Synthesis and electrochemical properties of new cobalt and manganese phthalocyanine complexes tetra-substituted with 3,4-(methylendioxy)-phenoxy

The synthesis and electrochemical properties of new cobalt and manganese phthalocyanine complexes, tetra-substituted with 3,4-(methylendioxy)-phenoxy at the peripheral (complexes 3 and 5) and non-peripheral (complexes 4 and 6) positions, are reported. Complexes 3 and 4 showed Q-band absorption, in DMF, at 668 and 686 nm, respectively while Q-band due to complexes 5 and 6 appeared at 732 and 760 nm, respectively in CHCl₃. All the complexes showed well resolved redox processes attributed to both metal and ring based processes. Complexes 3 and 4 showed four redox processes, labeled I, II, III and IV. For complex 3, process I (Co^IPc⁻²/Co^IPc⁻³) was observed at −1.45 V, II (Co^IIPc⁻²/Co^IPc⁻²) at −0.38 V, III (Co^IIIPc⁻²/Co^IIPc⁻²) at +0.49 V and IV (Co^IIIPc⁻¹/Co^IIIPc⁻²) at +0.97 V versus Ag|AgCl. Similar processes were observed for complex 4 at −1.36 V, −0.27 V, +0.56 V, +1.03 V versus Ag|AgCl, respectively. Complexes 5 and 6 showed two redox processes (I and II). For complex 5, these processes appeared at −0.79 V (Mn^IIPc⁻²/Mn^IIPc⁻³, I) and −0.07 V versus Ag|AgCl (Mn^IIIPc⁻²/Mn^IIPc⁻², II), while for complex 6, they were observed at −0.86 V and −0.04 V versus Ag|AgCl. Spectroelectrochemistry was used to probe and confirm the origin of these processes.     

Magnetic behavior of MnPS3 phases intercalated by [Zn2L] (LH2: macrocyclic ligand obtained by condensation of 2-hydroxy-5-methyl-1,3-benzenedicarbaldehyde and 1,2-diaminobenzene)

The intercalation of the cationic binuclear macrocyclic complex [Zn₂L]²⁺ (LH₂: macrocyclic ligand obtained by the template condensation of 2-hydroxy-5-methyl-1,3-benzenedicarbaldehyde and 1,2-diaminobenzene) was achieved by a cationic exchange process, using K_0.4Mn_0.8PS₃ as a precursor. Three intercalated materials were obtained and characterized: (Zn₂L)_0.05K_0.3Mn_0.8PS₃(1), (Zn₂L)_0.1K_0.2Mn_0.8PS₃(2) and (Zn₂L)_0.05K_0.3Mn_0.8PS₃(3), the latter phase being obtained by an assisted microwave radiation process. The magnetic data permit to estimate the Weiss temperature θ of ≈−130 K for (1); ≈−155 K for (2) and ≈−130 K for (3). The spin canting present in the potassium precursor remains unperturbed in composite (3), and spontaneous magnetization is observed under 50 K in both materials. However composites (1) and (2) do not present this spontaneous magnetization at low temperatures.The electronic properties of the intercalates do not appear to be significantly altered. The reflectance spectra of the intercalated phases (1), (2) and (3) show a gap value between 1.90 and 1.80 eV, lower than the value observed for the K_0.4Mn_0.8PS₃ precursor of 2.8 eV.     

Salicylaldehyde hydrazones as fluorescent probes for zinc ion in aqueous solution of physiological pH

Salicylaldehyde hydrazones of 1 and 2 were synthesized and their potential as fluorescent probes for zinc ion was investigated in this paper. Both of the probes were found to show fluorescence change upon binding with Zn²⁺ in aqueous solutions, with good selectivity to Zn²⁺ over other metal ions such as alkali/alkali earth metal ions and heavy metal ions of Pb²⁺, Cd²⁺ and Hg²⁺. They showed 1:2 metal-to-ligand ratio when their Zn²⁺ complex was formed. By introducing pyrene as fluorophore, 2 showed interesting ratiometric response to Zn²⁺. Under optimal condition, 2 exhibited a linear range of 0-5.0 μM and detection limit of 0.08 μM Zn²⁺ in aqueous buffer, respectively. The detection of Zn²⁺ in drinking water samples using 2 as fluorescent probe was successful.