Daidzein-imprinted membranes using co-functional monomers

Daidzein-imprinted poly(methacrylamide-co-acrylic acid) composite membranes with different ratios of methacrylamide (MAM) versus acrylic acid (AA) were prepared via UV initiated photo-copolymerization on the commercial filter paper with ethylene glycol dimethacrylate (EGDMA) as cross-linker and mixed cellulose ester as agglutinant. Infra-red (IR) spectroscopy and scanning electron microscope (SEM) were used to visualize the surface of the membranes. Binding and recognising properties of the imprinted composite membranes to daidzein and its analogues genistein were evaluated by static adsorption experiment. It was found that the daidzein-imprinted membranes showed high selectivity to daidzein, with the highest selectivity when the composite membrane with the ratio of MAM vs AA as 4:1. The results suggested that the molecularly imprinted composite membranes were potentially useful for daidzein enrichment.     

多壁碳纳米管表面对硝基苯酚印迹复合材料的制备与吸附性能

以多壁碳纳米管表面接枝的L-苯丙氨酸为结合位点, 甲基丙烯酸为功能单体, 乙二醇二甲基丙烯酸酯为交联剂, 采用沉淀聚合技术, 在碳纳米管表面制备了对硝基苯酚印迹复合材料. 采用红外光谱和扫描电镜研究了该印迹复合材料的结构和形貌, 结果表明, 在碳纳米管表面接枝了一层稳定的印迹材料. 采用高效液相色谱研究了该印迹材料的等温吸附性能, 结果表明, 该印迹材料对模板分子具有较大的吸附容量(Qmax=80.5 μmol/g)和良好的选择吸附性能(选择因子达2.5). 以该印迹材料作为固相萃取吸附剂, 研究了它对对硝基苯酚和其它结构类似物混合溶液的动态吸附性能, 结果表明, 印迹复合材料对对硝基苯酚的吸附容量不受结构类似物浓度的影响, 能较好地应用于对硝基苯酚的分离富集检测.     

Molecularly imprinted polymer membranes for substance-selective solid-phase extraction from water by surface photo-grafting polymerization

Hydrophilized polyvinylidene fluoride microfiltration membranes were surface-modified in the presence of a template (terbumeton) in methanol with a graft copolymer of a functional monomer (2-acrylamido-2-methyl-1-propane sulfonic acid, AMPS, methacrylic acid, MAA, or acrylic acid, AA) and a cross-linker (N,N'-methylene-bis-acrylamide) using UV irradiation and benzophenone as photoinitiator. As result, membranes covered with a thin layer of imprinted polymer selective to terbumeton were obtained. Blank membranes were prepared with the same monomer composition, but in the absence of the template. The membranes' capacity to adsorb terbumetone from aqueous solution was evaluated yielding information regarding the effect of polymer synthesis (type and concentration of functional monomer, concentration of cross-linker) on the resulting membranes' recognition properties. UV spectroscopic studies of the interactions with terbumetone revealed that AMPS forms a stronger complex than MAA and AA. In agreement with that finding, imprinting with AMPS gave higher affinities than with MAA and AA. The terbumeton-imprinted membranes showed significantly higher sorption capability to this herbicide than to similar compounds (atrazine, desmetryn, metribuzine). With the novel surface modification technology, the low non-specific binding properties of the hydrophilized microfiltration membrane could successfully be combined with the receptor properties of molecular imprints, yielding substance-specific molecularly imprinted polymer composite membranes. The high affinity of these synthetic affinity membranes to triazine herbicides together with their straightforward and inexpensive preparation provides a good basis for the development of applications of imprinted polymers in separation processes such as solid-phase extraction.     

烟酸分子印迹复合膜的制备及其分离性能研究

以聚偏氟乙烯微孔滤膜为支撑膜,烟酸为模板分子,用紫外光引发表面修饰聚合制备了微孔滤膜支撑-烟酸分子印迹复合膜.电镜扫描对该印迹复合膜进行了表面形态表征.Scatchard分析表明,在所研究的浓度范围内分子印迹复合膜中存在等价的结合位点,结合位点的平衡离解常数Kd为5.55×10-2mmol·L-1.底物的结合和渗透选择性实验表明,分子印迹复合膜对烟酸有较好的结合性能,结合量是6.10μmol·g-1.与其结构类似的化合物烟酰胺相比,分子印迹复合膜对模板分子展示了更好的选择性及高度的识别能力.     

白藜芦醇分子印迹复合膜的制备及其选择性能

以反式白藜芦醇为模板分子,聚偏氟乙烯微孔滤膜为支撑膜,丙烯酰胺为功能单体,乙二醇二甲基丙烯酸脂(EDMA)为交联剂,采用热引发原位聚合方法制备了白藜芦醇分子印迹聚合物膜。研究了分子印迹膜对白藜芦醇及其结构类似物(2-萘酚、白藜芦醇甙和双酚A)的结合和透过性,并用扫描电镜对膜形貌进行了表征。结果表明,印迹复合膜对模板分子白藜芦醇具有良好的吸附选择性,印迹膜对白藜芦醇的吸附量远远大于其它结构类似物,其饱和吸附量达1.72μmol/g,为非印迹膜的3倍;尺寸效应和印迹效应是影响物质在印迹膜上的透过量的两个重要因素,尺寸比模板分子小的2-萘酚最先透过,而相对于尺寸接近或大于模板分子的双酚A或白藜芦醇甙,模板分子优先透过。而且,模板分子在印迹膜上的透过量大于非印迹膜。     

Selective recognition of Triamterene in biological samples by molecularly imprinted monolithic column with a pseudo template employed

Melamine (MAM) was employed as a pseudo template to prepare a molecularly imprinted polymer monolithic column which presents the ability of selective recognition to Triamterene (TAT), whose structure was similar to that of MAM. Methacrylic acid and ethylene glycol dimethacrylate were applied as functional monomer and cross‐linker, respectively, during the in situ polymerization process. Chromatographic behaviors were evaluated, the results indicated that the molecularly imprinted polymer monolithic column possessed excellent affinity and selectivity for TAT, and the imprinting factor was high up to 3.99 when 7:3 of ACN/water v/v was used as mobile phase. In addition, the dissociation constant and the binding sites were also determined by frontal chromatography as 134.31 μmol/L and 132.28 μmol/g, respectively, which demonstrated that the obtained molecularly imprinted polymer monolith had a high binding capacity and strong affinity ability to TAT. Furthermore, biological samples could be directly injected into the column and TAT was enriched with the optimized mobile phase. These assays gave recovery values higher than 91.60% with RSD values that were always less than 3.5%. The molecularly imprinted monolithic column greatly simplified experiment procedure and can be applied to preconcentration, purification, and analysis of TAT in biological samples.     

不同功能单体合成的谷胱甘肽分子印迹聚合物的研究

采用分子印迹技术, 以谷胱甘肽为模板分子, 以丙烯酰胺、甲基丙烯酸为功能单体制备分子印迹聚合物; 通过静态吸附试验, 探讨了合成分子印迹聚合物时模板分子与功能单体的物质的量比、上样液pH 值、吸附平衡时间、上样液浓度对聚合物吸附性能的影响; 实验结果表明: 以丙烯酰胺、甲基丙烯酸为功能单体制备谷胱甘肽分子印迹聚合物时,谷胱甘肽与丙烯酰胺、甲基丙烯酸的最适摩尔比分别为1:5 和1:4, 以及最适静态吸附条件为: 上样液pH 值分别为3.0 和5.0 左右; 上样液浓度分别为1.50～2.00 g/L 和1.00～1.50 g/L; 静态吸附平衡时间为18 和20 h 左右. 同时也探讨了分子印迹聚合物对谷胱甘肽结构类似物的吸附性能, 结果表明, 所合成的分子印迹聚合物对谷胱甘肽具有良好的选择性吸附能力. 同时也研究了分子印迹聚合物对酵母抽提物中谷胱甘肽的吸附性能, 以丙烯酰胺和甲基丙烯酸为功能单体制备的分子印迹聚合物对混合体系中谷胱甘肽的一次性提取率分别为41%和77%. 分子印迹聚合物均表现出了较好的吸附特性, 为分离提纯谷胱甘肽提供一种可选择的途径.     

Chiral recognition and separation of beta2-amino acids using non-covalently molecularly imprinted polymers

Non-covalently molecularly imprinted polymers (MIPs) for beta2-amino acids were prepared for the first time. N-(2-chlorobenzyloxycarbonyl)-(R)-beta2-homophenylalanine (N-2-ClZ-(R)-beta2-HPhe) was imprinted with methacrylic acid (MAA) and/or 4-vinylpyridine (4-VPy) as the functional monomers, with ethylene glycol dimethacrylate (EDMA) as the cross-linker. The MIPs made with different ratios of MAA:4-VPy were studied in HPLC mode. The results show that MIPs made with 4-VPy yielded the best chiral separation factor (alpha= 1.86) for the template molecule. The importance for an efficient separation of pi-stacking interactions between the MIPs and the template molecule is demonstrated. Racemates of Z-alpha-amino acids and beta-amino acid analogues of the template were either not or poorly resolved by the MIPs, thus demonstrating the close three-dimensional complementarity of the MIPs' recognition sites with the template.     

4-甲基咪唑磁性表面分子印迹聚合物的制备及其应用

以4-甲基咪唑(4-MI)为模板分子,甲基丙烯酸(MAA)为功能单体,利用Fe₃O₄磁性纳米微球制备了具有特异性识别能力的磁性表面分子印迹聚合物(MIP),并用红外光谱(FT-IR)、X-射线衍射(XRD)、透射电子显微镜(TEM)和振动样品磁强计(VSM)对聚合物进行了表征,结果显示磁性载体表面包覆了分子印迹聚合物薄层。用紫外分光光度法对4-MI与MAA的相互作用进行了分析,结果表明主客体主要存在形式为1个4-MI被1个MAA所包围。通过紫外分光光度法对磁性印迹聚合物的吸附性能进行了研究,静态吸附平衡实验和Scatchard分析结果表明Fe₃O₄@(4-MI-MIP)中存在两类不同的结合位点,最大吸附量分别为40.31 mg/g和23.07 mg/g,平衡解离常数分别为64.85 mg/L和30.41 mg/L。动力学研究表明准二级动力学方程能较好地拟合动力学实验结果,该过程符合准二级动力学模型。该磁性印迹聚合物应用于环境水样中4-MI的吸附,取得了较满意的结果。     

Selective separation of magnolol using molecularly imprinted membranes

Molecularly imprinted membranes (MIMs) for selective separation of magnolol were prepared by thermal polymerization using magnolol as the template, ethylene glycol dimethacrylate (EGDMA) as the cross‐linker, 2,2‐azobisisobutyronitrile (AIBN) as the initiator, organic solvent as the porogen, methacrylamide (MAM) and acrylic acid (AA) as the functional monomers and cellulose acetate as the agglutinant. Commercial filter paper was used as the supporting material. The effects of different porogens and the ratio of functional monomers on the binding and recognition capacity of MIMs were investigated, and the morphology of the membranes was examined by scanning electron microscopy (SEM). The results showed that the MIMs have the highest selectivity to magnolol when the ratio of MAM/AA was 1:4 and tetrahydrofuran (THF) with dimethyl sulfoxide (DMSO) was used as the porogen. The morphology of the imprinted membranes after template extracting is much rougher with big cavities than that of the non‐imprinted membranes (NIMs) and the imprinted membranes before template extracting. The MIMs can selectively separate the magnolol.     

Molecularly imprinted polymer functionalized magnetic Fe3O4 for the highly selective extraction of triclosan

We present a facile strategy to prepare the molecularly imprinted polymers layer on the surface of Fe₃O₄ nanoparticles with core‐shell structure via sol–gel condensation for recognition and enrichment of triclosan. The Fe₃O₄ nanoparticles were first synthesized by a solvothermal method. Then, template triclosan was self‐assembled with the functional monomer 3‐aminopropyltriethoxysilane on the silica‐coated Fe₃O₄ nanoparticles in the presence of ethanol and water. Finally, the molecularly imprinted polymers were formed on the surface of silica‐coated Fe₃O₄ nanoparticles to obtain the product. The morphology, magnetic susceptibility, adsorption, and recognition property of magnetic molecularly imprinted polymers were characterized using transmission electron microscopy, Fourier transform infrared spectroscopy, X‐ray diffractometry, vibrating sample magnetometry, and re‐binding experiments. The magnetic molecularly imprinted polymers showed binding sites with good accessibility, fast adsorption rate, and high adsorption capacity (218.34 μg/g) to triclosan. The selectivity of magnetic molecularly imprinted polymers was evaluated by the rebinding capability of triclosan and two other structural analogues (phenol and p‐chlorophenol) in a mixed solution and good selectivity with an imprinting factor of 2.46 was obtained. The application of triclosan removal in environmental samples was demonstrated.     

Preparation of monodisperse curcumin-imprinted polymer by precipitation polymerization and its application for the extraction of curcuminoids from Curcuma longa L.

A monodisperse molecularly imprinted polymer (MIP) for curcumin was first prepared by precipitation polymerization using methacrylamide (MAM) and 4-vinylpyridine as functional co-monomers, divinylbenzene as a crosslinker, and a mixture of acetonitrile and toluene as a porogen. The use of MAM as the co-monomer resulted in the formation of a monodisperse MIP and non-imprinted polymer (NIP). MIP and NIP, respectively, were monodispersed with a narrow particle size distribution (3.3?±?0.09 and 3.5?±?0.10 μm). In addition to shape recognition, hydrophobic and hydrogen-bonding interactions affected the retention and molecular-recognition of curcumin on the MIP. The MIP for curcumin could extract curcuminoids (curcumin, demethoxycurcumin, and bisdemethoxycurcumin) in Curcuma longa L.

磁性分子印迹聚合物微球的制备及吸附特性研究

通过分子印迹技术,以磺胺(SNM)为模板分子,甲基丙烯酸(MAA)为功能单体,利用Fe3O4磁性纳米微球制备具有特异性识别磺胺的磁性分子印迹聚合物.通过紫外分光光度法对磁性印迹聚合物的吸附性能进行研究,并对吸附特性进行了探讨.利用等温吸附数据进行Scatchard分析,从而推断出印迹聚合物的最大吸附量Qmax为280....     

苄嘧磺隆印迹聚合物的波谱分析及吸附性能研究

以苄嘧磺隆为模板分子, α-甲基丙烯酸为功能单体, 三甲氧基丙烷三甲基丙烯酸酯为交联剂, 二氯甲烷为致孔剂, 在20 ℃温度下, 采用紫外引发沉淀聚合方法制备了苄嘧磺隆分子印迹聚合物. 紫外光谱和核磁共振氢谱实验提示了聚合前模板分子与功能单体之间的相互作用主要是分子间氢键, 分子间氢键相互作用能和双氢键的键距由Hyperchem 7.0和Gaussian 03W软件分别计算为: －28.6163 kJ/mol和0.179～0.181 nm. 制备的印迹聚合物在高效液相色谱和吸附动力学实验中都表现出对模板分子有较强的吸附作用.     

Preparation, characterization and properties studies of quinine-imprinted polymer in the aqueous phase

The uniform-sized spherical molecularly imprinted polymers were successfully prepared through molecular imprinting technology by two-step seed swelling and mini-emulsion polymerization in the aqueous condition using quinine as template molecules and methacrylic acid (MAA) as functional monomer. The polymers were characterized by IR spectra, thermal-weight analysis, scanning electron microscope and laser particle size analysis. The properties of imprinted polymers were investigated in different organic phases and aqueous media. In the organic media, results suggested that polar interactions (hydrogen bonding, ionic interactions) between acidic monomer/polymer and template molecules are mainly responsible for the binding and recognition; whereas in the aqueous medium, a considerable recognition effect was also obtained where the ionic (electrostatic) interaction and hydrophobic interaction play an important role. The experiments of binding different substrates indicated that the MIPs possessed an excellent rebinding ability and inherent selectivity to quinine. __________ Translated from Zhongshan Dcocue Xuebao/Acta Scientianum Natralium University Sunyatseni, 2005, 44(3)(in Chinese)     

Development and application of molecularly imprinted polymers as solid-phase sorbents for erythromycin extraction

Six molecularly imprinted polymers (MIPs) of erythromycin (ERY) were prepared by noncovalent bulk polymerization using methacrylic acid (MAA) as the functional monomer. On the basis of binding analysis, the MIPs with 1:2 optimum ratio of template to MAA were selected for subsequent scanning electron microscopy and Brunauer–Emmett–Teller analyses, which indicated that the MIPs had more convergent porous structures than the nonimprinted polymers. The equilibrium binding experiments showed that the binding sites of MIPs were heterogeneous, with two dissociation constants of 0.005 and 0.63 mg mL⁻¹, respectively. Furthermore, the performance of the MIPs as solid-phase extraction (SPE) sorbents was evaluated, and the selectivity analysis showed that the MIPs could recognize ERY with moderate cross-reactivity for other macrolides. The overall investigation of molecularly imprinted SPE for cleanup and enrichment of the ERY in pig muscle and tap water confirmed the feasibility of utilizing the MIPs obtained as specific SPE sorbents for ERY extraction in real samples. Figure Schematic diagram of the preparation and application of the erythromycin imprinted molecularly imprinted polymers Suquan Song and Aibo Wu contributed equally to this work.     

槲皮素-铜(Ⅱ)配位分子印迹聚合物的制备及其结合特性研究

以槲皮素-铜(Ⅱ)配合物(Qu-Cu)为模板分子、α-甲基丙烯酸为功能单体在强极性溶剂甲醇中合成了一种新型的配位分子印迹聚合物.紫外-可见光谱研究表明槲皮素与铜(Ⅱ)形成1:2配合物,槲皮素、铜(Ⅱ)和功能单体α-甲基丙烯酸三者发生了络合作用.利用透射电镜及平衡结合实验研究了溶剂用量对配位分子印迹聚合物形貌及其吸附性能...     

Clozapine imprinted polymers: synthesis, characterization and application for drug assay in human serum

A variety of molecularly imprinted polymers (MIPs) against clozapine (CLZ) were synthesized and their recognition properties were compared with blank non-imprinted polymers. Methacrylic acid (MAA) was used as a functional monomer and Chloroform or tetrahydrofuran (THF) were applied as polymerization solvents. Chloroform as the solvent and MAA/CLZ ratio of 5 was selected as optimized polymerization condition. In Scatchard analysis of MIP-CLZ interactions, two classes of binding sites were found in MIP—high affinity (KD = 14.5 μM) and low affinity (KD = 322.5 μM) binding sites. The polymer was evaluated as a selective sorbent in molecularly imprinted solid-phase extraction (MISPE) of CLZ from human serum. The MISPE procedure was developed and optimized with a recovery of 88-102%. The intra- and inter-day precision values were less than 1.36% and 2.5%, respectively. The selectivity of MISPE for CLZ was studied in comparison with some drugs. These drugs could be present with CLZ, simultaneously in serum of patients. The data indicated that the imprinted polymer had a good selectivity and affinity for CLZ and could be used for selective extraction and analysis of CLZ in human serum.     

Preparation and Characteristics of Esculin‐Imprinted Polymers

Four molecularly imprinted polymers (MIPs) were prepared in MeOH with esculin (=6,7‐dihydroxycoumarin 6‐(β‐D ‐glucopyranoside)=6‐(β‐D ‐glucopyranosyloxy)‐7‐hydroxy‐2H‐1‐benzopyran‐2‐one) as the imprinted molecule, methacrylic acid (=2‐methylprop‐2‐enoic acid; MAA), acrylamide (=prop‐2‐enamide; AM), 4‐vinylpyridine (=4‐ethenylpyridine; 4‐VP), or 2‐vinylpyridine (=2‐ethenylpyridine; 2‐VP) as the functional monomer, respectively, as well as ethylene glycol dimethacrylate (=2‐methylprop‐2‐enoic acid ethane‐1,2‐diyl ester; EGDMA) as the cross‐linking agent. The interaction between the template and the functional monomers was investigated by fluorescence and UV spectrophotometry, respectively, which revealed the presence of esculin/monomer complexes in the stoichiometric ratio 1 : 2 in the pre‐polymerization mixture. The resultant polymers were studied in equilibrium binding experiments to evaluate the recognition ability and the binding capacity towards esculin. The results showed that MIP₁, prepared with MAA as the functional monomer, exhibited advantageous characteristics of high binding capacity, optimal imprinting effect, and good selectivity towards esculin. The Scatchard analysis indicated that there are two types of binding sites in MIP₁, and its binding parameters including the apparent maximum numbers of binding sites and the dissociation constants were calculated. Finally, by packing an SPE column (SPE=solid‐phase extraction) with MIP₁, the esculin was separated and enriched successfully by this sorbent from samples of Cortex fraxini, and the average recovery was up to 74.7%.     

多壁碳纳米管表面邻苯二甲酸二(2-乙基)己酯印迹聚合物的制备及其在固相萃取中的应用

以苯基修饰的多壁碳纳米管为载体,邻苯二甲酸二(2-乙基)己酯为模板分子,甲基丙烯酸为功能单体,乙二醇二甲基丙烯酸酯为交联剂,在碳纳米管表面接枝一层塑化剂邻苯二甲酸二(2-乙基)己酯印迹聚合层.采用红外光谱和扫描电镜对聚合物进行表征和分析.结果表明,在碳纳米管表面成功接枝一层20～30 nm厚的印迹聚合层.采用高效液相色谱研究该印迹聚合物的吸附性能,结果表明,碳纳米管分子印迹聚合物对邻苯二甲酸二(2-乙基)己酯最大吸附量为69.1 μmol/g,达到吸附平衡时间约为60 min.选择性吸附实验表明,与其它结构类似物相比,该印迹复合材料对邻苯二甲酸二(2-乙基)己酯有良好的识别能力.作为固相萃取材料装填于固相萃取柱中,该印迹聚合物能对芒果汁样品中塑化剂进行有效的分离和富集.