Assessment of Chemcatcher passive sampler for the monitoring of inorganic mercury and organotin compounds in water

Abstract

Molecularly imprinted polymers (MIPs) for 4-nitrophenol have been successfully prepared by a thermal polymerization method using 4-vinylpyridine (4-VP) and ethylene glycol dimethacrylate (EDMA) as functional monomer and cross-linker, respectively. The obtained materials were evaluated with respect to their selective recognition properties for 4-nitrophenol by HPLC using organic and aqueous eluents. Furthermore, the specific binding sites that have been created during the polymerization process were analyzed via radioligand binding assays. The successful imprinting against 4-nitrophenol provides a new opportunity for advanced separation materials used in environmental analysis.     

Evaluation of two aquatic passive sampling configurations for their suitability in the analysis of estrogens in water

The presence of estrogens in the aquatic environment has been the target of several studies in the last decade. Newly developed passive sampling techniques for polar organic chemicals show great promise for the assessment of long-time exposure of aquatic organisms to emerging contaminants. In the present work, two configurations of the Chemcatcher^® passive sampler have been tested for their applicability to the analysis of seven estrogens in water. Accumulation experiments in the laboratory, to calculate the uptake rates, and a field trial show that the polar configuration of this device may be used for the efficient sampling and determination of estrogens in water. Time weighted average concentrations were determined in the field trial and compared with spot sampling concentrations. The detection of estriol using passive sampling, although not found with spot sampling, clearly demonstrates the value of this technique in assessing relevant concentrations of estrogens in the aquatic media.     

Mercury and organotin compounds monitoring in fresh and marine waters across Europe by Chemcatcher passive sampler

Several field trials have been carried out to assess the performance of the passive sampler Chemcatcher as aquatic monitoring technology for inorganic mercury and the organotin pollutants monobutyltin (MBT), dibutyltin (DBT) and tributyltin (TBT) in different types of waters across ten locations in Europe. Two version of the sampler were used. One for mercury that consists on 47?mm Empore? disks of iminodiacetic chelating groups as the receiving phase overlaid by a diffusion membrane of polyethersulphone; and other for organotin compounds comprising a C₁₈ disk and a cellulose acetate membrane. Both membranes were held in a disposable polycarbonate body. The two samplers were calibrated in the laboratory in a previous work to estimate the pollutant concentration. For field sampling, the samplers were deployed for 14 days. In parallel spot samples were periodically collected during the deployment period for comparison purposes. No significant biofouling on the samplers was observed for the locations monitored. In general, water concentrations estimated by Chemcatcher were lower than those found in spot water samples due to the device only collected the soluble bioavailable fraction of target pollutants. However, the pre-concentration capability of Chemcatcher allowed the determination of the tested pollutants at levels where spot sampling fails, even in difficult water bodies such as sewage treatment plants. These advantages lead to consider this emerging methodology as a complementary tool to traditional spot sampling.     

Evaluation of the aquatic passive sampler Chemcatcher for the monitoring of highly hydrophobic compounds in water

The Chemcatcher passive sampler was primarily developed for the detection and quantification of priority organic pollutants (e.g., polycyclic aromatic hydrocarbons) in water. In the present study, this prototype was evaluated for highly hydrophobic compounds such as the tetrabrominated diphenyl ether BDE-47, the hexabrominated diphenyl ether BDE-153, and the historic pesticide DDT with its main metabolites (DDE and DDD). The sampling device consists basically of a receiving phase with high affinity for organic chemicals which is separated from the environment by a diffusion limiting membrane, both placed in a rigid PTFE body. C18 Empore disks were evaluated as receiving phase, obtaining a better accumulation when impregnated until saturation with n-octanol. As diffusion membrane, low density polyethylene was chosen over polyethersulphone. Once optimized its accumulation capacity for the target compounds, the linear behaviour of this accumulation was investigated and shown to be satisfactory in a period of 15 days. Preliminary uptake rates calculated from that accumulation anticipate the utility of this device for the detection of DDXs and the PBDEs, as calculated limits of detection are lower than usually reported environmental concentrations.     

Trends in the use of passive sampling for monitoring polar pesticides in water

The presence of polar pesticides in environmental waters is a growing problem. After application their migration into the aqueous phase is promoted by their high water solubility. Transport processes are usually complex and inputs are generally stochastic; this makes monitoring of this class of pesticides challenging using low volume spot samples of water. Recently there has been a trend to use passive samplers to monitor pesticides in river catchments as it is an in-situ time integrative sampling technique. The three main types of device used for this purpose are, Chemcatcher®, POCIS and o-DGT. This article reviews the fate and current state-of-the-art for monitoring polar pesticides in aqueous matrices. Principles and the theory of passive sampling and strategies for passive sampler design and operation are presented. Advances in the application of passive sampling devices for measuring polar pesticides are extensively critiqued; future trends in their use are also discussed.     

A novel approach for monitoring of cyanobacterial toxins: development and evaluation of the passive sampler for microcystins

We have investigated the ability of an integrative sampler for polar organic chemicals to sequestrate a group of common and highly hazardous cyanobacterial toxins—microcystins. In a pilot experiment, commercially available passive samplers were shown to effectively accumulate microcystins after 7 days’ exposure in the field. To find the most efficient configuration for sequestration of microcystins, four different porous membranes (polycarbonate, polyester, polyethersulfone and nylon) and two sorbents (Oasis HLB and Bondesil-LMS) were evaluated in the laboratory experiments, where samplers of different configuration were exposed to microcystins (microcystin-RR and microcystin-LR) for 14 days under steady conditions. We observed differences in sampling rates and amounts of accumulated microcystins depending on the sampler configurations. The samplers constructed with the polycarbonate membrane and Oasis HLB sorbent (2.75 mg/cm²) provided the highest sampling rates (0.022 L/day for microcystin-RR and 0.017 L/day for microcystin-LR). To the best of our knowledge, the present study is the first reporting application of passive samplers for microcystins, and our results demonstrate the suitability of this tool for monitoring cyanotoxins in water.     

Application of Chemcatcher passive sampler for monitoring levels of mercury in contaminated river water

A passive sampler (Chemcatcher) consisting of a 47 mm Empore™ chelating disk (CHE) with iminodiacetic groups as the receiving phase overlaid with a diffusion membrane was developed and calibrated for the monitoring of Hg in water. Three different diffusion membranes including cellulose acetate (CA), polyethersulphone (PS) and cellulose dialysis membrane (D) were tested. The best performance was obtained with the CHE-PS tandem. The effective sampling rate of the device (R_s, L day⁻¹) is defined as the equivalent volume of water extracted per unit time, and is analyte specific and can be determined experimentally in a flow-through tank. Effects of water temperature and turbulence on the uptake rate of Hg were assessed under controlled laboratory conditions. Sampling rates were in the range of 0.029-0.091 L day⁻¹. An increase in sampling rate with turbulence was demonstrated. The detection limit of the sampler obtained in flowing waters ranged between 2.2 and 2.9 ng L⁻¹ Hg. The performance of Chemcatcher was tested alongside spot water sampling in a 14-day field deployment at two locations on the Valdeazogues River, Almadén, Spain. In general, the Hg concentration estimated by the Chemcatcher was lower than that found in spot water samples collected over the same period. This may be explained by the behaviour of this sampler that measures only the labile fraction of Hg in water, and this will exclude some species. However, Chemcatcher preconcentrates Hg allowing its determination in some places where its concentration is below the detection limit of spot sampling.     

Development of a new passive sampler based on diffusive milligel beads for copper analysis in water

A new passive sampler was designed and characterized for the determination of free copper ion (Cu²⁺) concentration in aqueous solution. Each sampling device was composed of a set of about 30 diffusive milligel (DMG) beads. Milligel beads with incorporated cation exchange resin (Chelex) particles were synthetized using an adapted droplet-based millifluidic process. Beads were assumed to be prolate spheroids, with a diameter of 1.6 mm and an anisotropic factor of 1.4. The milligel was controlled in chemical composition of hydrogel (monomer, cross-linker, initiator and Chelex concentration) and characterized in pore size. Two types of sampling devices were developed containing 7.5% and 15% of Chelex, respectively, and 6 nm pore size. The kinetic curves obtained demonstrated the accumulation of copper in the DMG according to the process described in the literature as absorption (and/or adsorption) and release following the Fick's first law of diffusion. For their use in water monitoring, the typical physico-chemical characteristics of the samplers, i.e. the mass-transfer coefficient (k₀) and the sampler-water partition coefficient (K_sw), were determined based on a static exposure design. In order to determine the copper concentration in the samplers after their exposure, a method using DMG bead digestion combined to Inductively Coupled Plasma – Atomic Emission Spectrometry (ICP-AES) analysis was developed and optimized. The DMG devices proved to be capable to absorb free copper ions from an aqueous solution, which could be accurately quantified with a mean recovery of 99% and a repeatability of 7% (mean relative uncertainty).     

Simple and regioselective oxyiodination of aromatic compounds with ammonium iodide and Oxone

A simple method for the iodination of aromatic compounds using NH₄I as the iodine source and Oxone^® as the oxidant is described.     

Strategies for monitoring the emerging polar organic contaminants in water with emphasis on integrative passive sampling

Although polar organic contaminants (POCs) such as pharmaceuticals are considered as some of today's most emerging contaminants few of them are regulated or included in on-going monitoring programs. However, the growing concern among the public and researchers together with the new legislature within the European Union, the registration, evaluation and authorisation of chemicals (REACH) system will increase the future need of simple, low cost strategies for monitoring and risk assessment of POCs in aquatic environments. In this article, we overview the advantages and shortcomings of traditional and novel sampling techniques available for monitoring the emerging POCs in water. The benefits and drawbacks of using active and biological sampling were discussed and the principles of organic passive samplers (PS) presented. A detailed overview of type of polar organic PS available, and their classes of target compounds and field of applications were given, and the considerations involved in using them such as environmental effects and quality control were discussed. The usefulness of biological sampling of POCs in water was found to be limited. Polar organic PS was considered to be the only available, but nevertheless, an efficient alternative to active water sampling due to its simplicity, low cost, no need of power supply or maintenance, and the ability of collecting time-integrative samples with one sample collection. However, the polar organic PS need to be further developed before they can be used as standard in water quality monitoring programs.     

Improving detection limits for organotin compounds in several matrix water samples by derivatization-headspace-solid-phase microextraction and GC-MS

Triethyltin, tributyltin, diphenyltin and triphenyltin were selected as model compounds. The method is based on in situ ethylation and simultaneous headspace-solid-phase microextraction (HS-SPME) and gas chromatographic-mass spectrometry analysis (GC-MS). The extraction procedure was optimized studying some variables such as reaction time, salinity, sample volume and headspace volume. SPME-GC-MS and SPME-GC-FID techniques were compared; quality assurance parameters such as sensitivity, selectivity and precision were established. The proposed procedure showed limits of detection between 0.025 and 1 ng/L. The linearity was in the 0.025-5000 ng/L range. The precision expressed as relative standard deviations (RSD), were below 20%. Real wastewaters and seawaters were analyzed. The method permits controlling legislated annual average values.     

An amperometric method for the detection of amitrole, glyphosate and its aminomethyl-phosphonic acid metabolite in environmental waters using passive samplers

The herbicides amitrole and glyphosate, and its metabolite aminomethyl-phosphonic acid (AMPA), in water samples have been directly analysed by high-performance liquid chromatography using an electrochemical (EC) detector. Limits of detection of 0.3 μg mL⁻¹ for glyphosate, 0.05 μg mL⁻¹ for AMPA and 0.03 μg mL⁻¹ for amitrole were comparable to those obtained by other authors using EC and also by liquid chromatography coupled to mass spectrometry, but the latter method requires derivatisation and pre-concentration of the sample whereas EC methods show similar sensitivity without the need of any derivatisation. The method was specifically designed to analyse extracts from passive samplers used for monitoring of polar herbicide residues in waters. To this purpose, three types of Empore^® disks were tested for their ability to adsorb and desorb these ionic, polar analytes. A procedure for their extraction from the membranes and reducing the interferences from other substances present in natural waters (i.e. humic acids) is described. The method is simple, does not require sophisticated equipment and is valid for the analysis and monitoring of herbicides residues using passive samplers.     

A passive sampling-based analytical strategy for the determination of volatile organic compounds in the air of working areas

An analytical methodology based on the use of a polyethylene layflat tube filled with activated carbon and Florisil (ACFL-VERAM) was employed for the passive sampling of volatile organic compounds (VOCs) in the air of working areas of packing industries. VOCs amount in the ACFL-VERAM sampler was directly determined through head-space-gas chromatography-mass spectrometry (HS-GC-MS) allowing a direct determination in only 20 min without the need of any previous treatment. Uptake parameters, like sampling rate (R_S) and sampler-air partition coefficient (K_SA), were determined for every studied VOC from adsorption isotherm data. Additionally, experimental equations have been proposed to predict R_S and K_SA from the octanol-air partition coefficients reported in the literature. The proposed methodology reaches method detection levels from 0.007 to 0.2 mg m⁻³ for the studied VOCs.     

Determination of volatile organic compounds in contaminated air using semipermeable membrane devices

Semipermeable membrane devices (SPMDs) were evaluated as passive samplers for the determination of 26 volatile organic compounds (VOCs) in contaminated air of occupational environments. A direct methodology based on the use of head-space-gas chromatography-mass spectrometry (HS-GC-MS) was developed for VOCs determinations in SPMDs, without any sample pre-treatment and avoiding the use of solvents. A desorption temperature of 150 °C for 10 min was sufficient for a sensitive VOCs determination providing limits of detection in the range of 15 ng SPMD⁻¹ for 21 of 26 studied compounds. Linear and equilibrium uptake models were established for each VOC from compound isotherms. Highly volatile compounds were slightly absorbed and moderately volatile compounds were strongly absorbed by SPMDs. This study is the first precedent of the use of SPMDs for the simultaneous sampling of a wide number of VOCs. The use of SPMDs is a simple and low cost alternative to ordinary sampling devices such as Radiello^® diffusive samplers or badge-type solid-phase supports.     

Relationship of cytotoxic groups in organotin molecules and the effectiveness of the compounds against leukemia

Cytotoxicity of organotin compounds is assessed and their effectiveness against leukemia is discussed. The functional groups attached to the tin atom in organotin compounds control the cytotoxicity of the compound towards the thymus gland. The four organotin moieties which have the greatest toxic effect upon the thymus gland are the tri-n-butyltin, di-n-butyltin, tri-n-propyltin and di-n-octyltin groups. Compounds containing these groups also exhibit the poorest test-control ratio (T/C) values when tested as anti-cancer agents against leukemic mice using NCI protocol.     

Synthesis and evaluation of molecularly imprinted polymers for organotin compounds: a screening method for tributyltin detection in seawater

The environmental impact of some organotin compounds (OTC) has given particulate importance to analytical studies. This paper reports the first attempt to apply the emerging molecular imprinting technology to this field. Several imprinted polymers have been synthesised by the non-covalent free radical approach using sodium methacrylate (NaMA) or 4-vinylpyridine (4-VP) as monomers in the presence of TBT as template molecule in three different polymerisation media (toluene, acetonitrile and methanol/water). The ability of the polymers synthesised to retain and distinguish TBT from its degradation products has been evaluated and optimized. The results clearly showed the presence of cavities within the polymeric matrix allowing specific recognition of TBT. Cross-reactivity from other Sn species (monobutyltin (MBT), dibutyltin (DBT) and inorganic Sn) has also been evaluated. Rapid and direct differentiation of TBT from its main degradation products in seawater was achieved. The analytical characteristics included linearity (0.05-50 μg l⁻¹), a pre-concentration factor of 150, and a quantification limit of 0.04 μg l⁻¹ for 1 l.     

An evaluation of reversed-phase and ion-exchange chromatography for use with inductively coupled plasma—mass spectrometry for the determination of organotin compounds

An evaluation of reversed-phase high-performance liquid chromatography (HPLC) employing mobile phases compatible with direct coupling to inductively coupled plasma-mass spectrometry (ICP-MS) is described for the selective and sensitive detection of organotin species. The findings of this study are compared with established methods, employing ion-exchange chromatography. In order to achieve optimum performance, both the HPLC and ICP-MS were optimized for speciation work. The results from studies using various mobile phases for the separation of a range of tin compounds (inorganic tin, tributyltin, dibutyltin and monobutyltin) are discussed both in terms of resolution and compatibility with ICP-MS instrumentation. Tropolone, a commonly used complexing agent for organotin species, is also discussed with reference to the chromatographic separation of tin species. Finally, the role of isotope dilution analysis in conjunction with HPLC-ICP-MS for organotin speciation is described with respect to the European Community Standards, Measurements and Testing (BCR) certified material programme.     

Alternative protocol for oxidation in water: an effective epoxidation system promoted by the combination of Oxone and an amphiphilic ketone

Epoxidation of cyclooctene and other alkenes with Oxone^® was promoted effectively in an aqueous micellar solution of an amphiphilic ketone, which was easily derived from hepta(ethylene glycol) monodecyl ether.     

Evaluation and optimization of solid adsorbents for the sampling of gaseous methylated mercury species

This study evaluates the suitability of commercially available adsorbents for the measurement of gaseous organic mercury species namely monomethylmercury (MMHg) and dimethylmercury (DMHg).     

Spectroscopic characterization of the stabilising activity of migrating HALS in a pigmented PP/EPR blend

In previous work, the FT-IR maximum of absorption of a low molecular weight HALS containing a sebacate structure was reported to shift from 1738 to 1732 cm⁻¹ during the photo-aging of polypropylene. Previous studies have shown that the reduced mobility of the molecule caused the absorption to shift towards lower frequencies while decreasing its stabilizing activity. This paper presents further results evidencing the loss of activity of the low molecular weight HALS and proposes a novel mechanistic interpretation for the observed spectral shift.