Reliable and facile method for preparation of solventless bilayer lipid membranes for electroanalytical investigations

Bilayer lipid membranes continue to be of interest as elements for development and investigation of chemically-modified electrodes and biosensors, yet also continue to be difficult to prepare and replicate with precision. A simplified and reliable technique for the rapid formation of solventless bilayer lipid membranes is described, and the method has been shown to produce membranes which nominally vary by only 5-10% with respect to ion conductivity. Methods for rapid physical and chemical characterization of these membranes for establishment of reproducibility and quality are given.     

Formation of tethered bilayer lipid membranes on gold surfaces: QCM-Z and AFM study

Recently, tethered bilayer lipid membranes (tBLMs) have shown high potential as biomimetic systems due to their high stability and electrical properties, and have been used in applications ranging from membrane protein incorporation to biosensors. However, the kinetics of their formation remains largely uninvestigated. By using quartz crystal microbalance with impedance analysis (QCM-Z), we were able to monitor both the kinetics and viscoelastic properties of tether adsorption and vesicle fusion. Formation of the tether monolayer was shown to follow pseudo-first-order Langmuir kinetics with association and dissociation rate constants of 21.7 M-1 s(-1) and 7.43 x 10-6 s(-1), respectively. Moreover, the QCM-Z results indicate a rigid layer at the height of deposition, which then undergoes swelling as indicated by AFM. The deposition of vesicles to the tether layer also followed pseudo-first-order Langmuir kinetics with observed rate constants of 5.58 x 10(-2) and 2.41 x 10-2 s(-1) in water and buffer, respectively. Differential analysis of the QCM-Z data indicated deposition to be the fast kinetic step, with the rate-limiting steps being water release and fusion. Atomic force microscopy pictures taken complement the QCM-Z data, showing the major stages of tether adsorption and vesicle fusion, while providing a road map to successful tBLM formation.     

Examination of bilayer lipid membranes for 'pin-hole' character

BLM prepared on electrode substrates by supporting or tethering were tested for 'pin-hole' character, comparing data from cyclic voltammetry (CV), surface plasmon resonance (SPR) and rotating disc electrodes (RDE). 1-hexadecylamine tethered BLMs on SAM modified gold electrodes were compared with BLMs assembled on modified polyHEMA or sol-gel layers. BLM formation followed by SPR showed that the initial phase of the assembly was complete in 5-20 minutes and produced layers of thickness >5 nm, compared with the expected final BLM thickness of approximately 3 nm. The CVs of the K(3)[Fe(CN)(6)] couple were significantly suppressed irrespective of the method of BLM assembly, without major differences emerging for the different methods. However, data from the RDE distinguished the 'pin-hole' character of the different preparations. The data were consistent with incomplete initial (<1 h, SPR estimated BLM thickness >5 nm) vesicle fusion leaving 'pin-holes' of approximately 2 microm (HDA-11-mercaptoundecanoic acid (MUA) tethered BLM) to approximately 3 microm (tetraethylorthosilicate sol-gel supported BLM) followed by a slow maturation (>15 h; impedance spectroscopy estimated thickness approximately 3 nm) and lateral spreading and fusion, resulting in loss of 'pin-hole' character (<1 microm). The BLM could be used in conjunction with potentiometric measurement to observe the incorporation of nystatin into the BLM and the rate of incorporation adjusted according to original permeability of the BLM. The 'pin-hole-free' BLM construction with lowest permeability (TEOS supported, 4 x 10(-10) cm s(-1) compared with HDA-MUA, 3 x 10(-9) cm s(-1)) gave a potentiometric signal independent of bulk ion-concentration across 5 decades change in concentration. Formed on an ion-selective electrode, nystatin incorporation could be followed as a change in potential, over >2 h, whereas the TEOS supported BLM with permeability 1 x 10(-9) cm s(-1) shows nystatin incorporation within 1 h. In this instance, addition of ConA reduced the potential to the same value as prior to nystatin incorporation, consistent with nystatin channel closure.     

Interfacial tension of bilayer lipid membranes

Interfacial tension is an important characteristic of a biological membrane because it determines its rigidity, thus affecting its stability. It is affected by factors such as medium pH and by the presence of certain substances, for example cholesterol, other lipids, fatty acids, amines, amino acids, or proteins, incorporated in the lipid bilayer. Here, the effects of various parameters to on interfacial tension values of bilayer lipid membranes are discussed.     

Supramolecular chemistry in lipid bilayer membranes

Lipid bilayer membranes form compartments requisite for life. Interfacing supramolecular systems, including receptors, catalysts, signal transducers and ion transporters, enables the function of the membrane to be controlled in artificial and living cellular compartments. In this perspective, we take stock of the current state of the art of this rapidly expanding field, and discuss prospects for the future in both fundamental science and applications in biology and medicine.

This perspective provides an overview of the current state of the art in supramolecular chemistry in lipid bilayer membranes, including receptors, signal transducers, catalysts and transporters, and highlights prospects for the future.     

A novel method to fabricate patterned bilayer lipid membranes

We introduce a new method for forming tethered bilayer lipid membranes on surfaces patterned using a photocleavable self-assembled monolayer (SAM). A SAM terminated with a hydrophobic fluorocarbon residue was bound to a gold surface through a link containing a photocleavable ortho-nitrobenzyl moiety. Hydrophilic regions were produced by irradiation with soft UV (365 nm) through a photomask. The patterned surface was characterized by scanning electron microscopy and electrochemical impedance spectroscopy. Tethered bilayer lipid membranes with well-defined bilayer and monolayer regions were then formed by exposure to egg PC vesicles. The membranes had resistance and capacitance values of 0.52 MOmega.cm2 and 0.83 microF.cm-2, respectively.     

Tethered bilayer lipid membranes self-assembled on mercury electrodes

In order to incorporate integral proteins in a functionally active state, metal-supported lipid bilayers must have a hydrophilic region interposed between the bilayer and the metal. This region is realized with a hydrophilic molecule terminating at one end with a sulfhydryl or disulfide group that anchors this "hydrophilic spacer" to the surface of a metal, such as gold or mercury. The other end of the hydrophilic spacer may be covalently linked to the polar head of a phospholipid molecule, giving rise to a supramolecule called "thiolipid" (TL). With respect to gold, mercury has the advantage of providing a defect-free and fluid surface to the self-assembling spacer. Hydrophilic spacers consisting of a polyethyleneoxy or a hexapeptide chain, as well as thiolipids derived from these spacers, were employed to fabricate mercury-supported lipid bilayers. The formation of a lipid bilayer on top of a self-assembled monolayer of a hydrophilic spacer, or of a single-lipid monolayer on top of a self-assembled monolayer of a thiolipid, was realized by simply immersing the coated mercury electrode into an aqueous solution across a lipid film previously spread on its surface at its spreading pressure. Particularly stable mercury-supported lipid bilayers were obtained by using thiolipids. The biomimetic properties of these lipid bilayers were tested by incorporating channel-forming polypeptides (gramicidin and melittin) and proteins (OmpF porin). The effect of the transmembrane potential on the function of these channels was estimated by using a simple electrostatic model of the mercury-solution interphase.     

Solid-state bonding technique for template-stripped ultraflat gold substrates

A simple procedure using gold diffusion bonding for the preparation of template-stripped gold (TSG) surfaces is described. TSG surfaces are useful for surface studies because a very consistent flat gold surface with few defects can be easily prepared. We have developed a method of producing TSG surfaces that relies only on gold diffusion bonding rather than epoxies. The resulting substrates are free from concerns of solvent compatibility, heat stability, and impurities. Bonding of centimeter-sized substrates is performed at 300 degrees C for 2 h using a vise and aluminum foil.     

Curvature-modulated phase separation in lipid bilayer membranes

Cellular membranes exhibit a variety of controlled curvatures, with filopodia, microvilli, and mitotic cleavage furrows being only a few of many examples. Coupling between local curvature and chemical composition in membranes could provide a means of mechanically controlling the spatial organization of membrane components. Although this concept has surfaced repeatedly over the years, controlled experimental investigations have proven elusive. Here, we introduce an experimental platform, in which microfabricated surfaces impose specific curvature patterns onto lipid bilayers, that allows quantification of mechanochemical couplings in membranes. We find that, beyond a critical curvature value, membrane geometry governs the spatial ordering of phase-separated domain structures in membranes composed of cholesterol and phospholipids. The curvature-controlled ordering, a consequence of the distinct mechanical properties of the lipid phases, makes possible a determination of the bending rigidity difference between cholesterol-rich and cholesterol-poor lipid domains. These observations point to a strong coupling between mechanical bending and chemical organization that should have wide-reaching consequences for biological membranes. Curvature-mediated patterning may also be useful in controlling complex fluids other than biomembranes.     

Tethered bilayer lipid membranes with giga-ohm resistances

The successful reconstitution of a tethered BLM on μ-electrodes ranging from 4000 μm to 8 μm is shown in this article. The increase in membrane resistance with decreasing electrode size and the dependency of the membrane capacitance on the electrode size was studied. Furthermore the functional incorporation of α-hemolysin from Staphylococcus aureus into a tBLM situated on μ-electrodes was achieved.     

Reconstituted olfactory receptors in bilayer lipid membranes

Bullfrog olfactory receptors were reconstituted in bilayer lipid membranes (BLMs). Three odorants were presented to the reconstituted system. The three structurally related odorants were diethylsulfide (DES), thiophene (THP) and diethanolsulfide (DOS). The ordorants were presented in pairs. DOS induced a response in the presence of either of the other two odorants. DES and THP did not induce a response in the presence of either of the other two odorants. These observations suggest that there are two substructures, one common to the three odorants and one that is unique to DOS. The results support the notion that olfactory receptors detect certain molecular segments of odorants.     

Specific binding structures of dendrimers on lipid bilayer membranes

Dissipative particle dynamics simulations are used to study the specific binding structures of polyamidoamine (PAMAM) dendrimers on amphiphilic membranes and the permeation mechanisms. Mutually consistent coarse-grained (CG) models both for PAMAM dendrimers and for dimyristoylphosphatidylcholine (DMPC) lipid molecules are constructed. The PAMAM CG model describes correctly the conformational behavior of the dendrimers, and the DMPC CG model can properly give the surface tension of the amphiphilic membrane. A series of systematic simulations is performed to investigate the binding structures of the dendrimers on membranes with varied length of the hydrophobic tails of amphiphiles. The permeability of dendrimers across membranes is enhanced upon increasing the dendrimer size (generation). The length of the hydrophobic tails of amphiphiles in turn affects the dendrimer conformation, as well as the binding structure of the dendrimer-membrane complexes. The negative curvature of the membrane formed in the dendrimer-membrane complexes is related to dendrimer concentration. Higher dendrimer concentration together with increased dendrimer generation is observed to enhance the permeability of dendrimers across the amphiphilic membranes.     

Interactions between model inclusions on closed lipid bilayer membranes

Protein inclusions in the membranes of living cells interact via the deformations they impose on that membrane. Such membrane-mediated interactions lead to sorting and self-assembly of the inclusions, as well as to membrane remodelling, crucial for many biological processes. For the past decades, theory, numerical calculations and experiments have been using simplified models for proteins to gain quantitative insights into their behaviour. Despite challenges arising from nonlinearities in the equations, the multiple length scales involved and the nonadditive nature of the interactions, recent progress now enables for the first time a direct comparison between theoretical and numerical predictions and experiments. We review the current knowledge on the biologically most relevant case, inclusions on lipid membranes with a closed surface and discuss challenges and opportunities for further progress.     

Surface hydrophilization for polypropylene microporous membranes: A facile interfacial crosslinking approach

A hydrophilic surface is very important for hydrophobic separation membranes such as polypropylene microporous membranes (PPMMs). In this work a facile and effective method, interfacial crosslinking combined with pretreatment by dielectric barrier discharge plasma at atmospheric pressure, was developed for endowing PPMMs with a hydrophilic and charged surface. Poly(N,N-dimethylaminoethyl methacrylate) (PDMAEMA) and p-xylylene dichloride were selected for quaternization crosslinking to form a positively charged coating layer, which was characterized with FT-IR/ATR, XPS, and FESEM. Water contact angle and pure water flux measurements were conducted to evaluate the surface hydrophilicity. The influence of surface charges on protein filtration was also investigated. It is found that the mass gain of interfacial crosslinking increases almost linearly with increasing the PDMAEMA concentration from 0.5 to 10 g/L. The crosslinking degree is larger than 80% according to the XPS results, ensuring the stability of the crosslinking layer. The surface hydrophilicity is demonstrated by the sharp decrease of water contact angle from 145° to 20°. The pure water flux also increases 3 times under the optimized conditions. Furthermore, the results of protein filtration suggest that these highly hydrophilic and charged surfaces can effectively resist the fouling of proteins.     

Electronic processes and photosensitization in bilayer lipid membranes

Abstract— In part one of this paper, evidence for electronic processes in experimental and biological membranes are reviewed. The membrane under consideration, be it experimental or biological, is understood to mean an ultrathin bamer separating two aqueous phases. The question ‘can electronic processes occur in/across such a structure immersed in an aqueous environment?’ is answered affirmatively. In the second part of this paper, photosensitization by dyes and photoelectric effects in experimental bilayer lipid membranes observed recently are described.     

Diffusion of liquid domains in lipid bilayer membranes

We report diffusion coefficients of micron-scale liquid domains in giant unilamellar vesicles of phospholipids and cholesterol. The trajectory of each domain is tracked, and the mean square displacement grows linearly in time, as expected for Brownian motion. We study domain diffusion as a function of composition and temperature and measure how diffusion depends on domain size. We find mechanisms of domain diffusion which are consistent with membrane-dominated drag in viscous L(o) phases and bulk-dominated drag for less viscous L(alpha) phases. Where applicable, we obtain the membrane viscosity and report activation energies of diffusion.