Resorufin as an electron acceptor in glucose oxidase-catalyzed oxidation of glucose

Resorufin (1) has been found to act as an electron acceptor in glucose oxidase (GOD)-catalyzed oxidation of glucose. When a 1: 1: 1 mixture of solutions of 1 (5.0 microM), glucose, and GOD (4.0 mg/ml) in phosphate buffer (pH 7.4, 0.1 M) was incubated at 36 degrees C under aerobic conditions and the reaction was followed by a measurement of changes in fluorescence intensity due to 1, only two types of fluorometric traces were observed: (1) when a glucose solution of less than 0.7 mM was subjected to the enzymatic reaction, no consumption of 1 was observed; (2) the reaction with glucose at more than 1.0 mM always consumed 1, affording a regression fluorometric curve, and yet the obtained fluorometric traces could be almost superimposed on one another with no dependence on the glucose concentration. The reasons for the observed phenomena are discussed.     

Hydrogen peroxide-induced deacetylation of acetyl resorufin as a novel indicator reaction for fluorometric detection of glucose using only glucose oxidase

Hydrogen peroxide (H2O2)-induced deacetylation of non-fluorescent acetyl resorufin (1) to fluorescent resorufin (2) as a novel indicator reaction for fluorometric detection of glucose using only glucose oxidase (GOD) is described. When a 1:1:1 mixture of 1 (in CH3CN), glucose, and GOD (each in pH 7.4 phosphate buffer) was incubated at 25 degrees C under aerobic conditions, the resulting solution turned yellow to fluorescent pink due to 2. The formation of 2 was markedly retarded on incubation under anaerobic conditions. When a mixture of 1 and H2O2 was incubated under aerobic conditions, the formation of 2 was noted as in the case of the enzymatic reaction of 1. These results demonstrated that the observed color change is brought about through deacetylation of 1 to 2 induced by H2O2 generated in GOD-catalyzed oxidation of glucose. With regard to the fluorometric traces of the enzymatic reaction with 1 (0.2 mM), GOD (0.5 mg/ml), and glucose at 25 degrees C, fluorescence intensity exhibited a linear relationship against glucose concentration between 0.2 and 2.0 mm, with a correlation coefficient of 0.997. Neither ascorbic acid, uric acid, nor bilirubin significantly interfered with the transformation of 1 to 2 through GOD-catalyzed oxidation of glucose.     

New colorimetric detection of glucose by means of electron-accepting indicators: ligand substitution of [Fe(acac)3-n(phen)n]n+ complexes triggered by electron transfer from glucose oxidase

A new colorimetric detection technique for glucose, based on electron transfer from glucose oxidase (GODred) to iron(III) acetylacetonate(acac)/phenanthroline(phen) mixed complexes, is developed. When GOD is added to an aqueous mixture that contains tris(acetylacetonato)iron(III) complex (FeIII-(acac)3), 1,10-phenanthroline (phen), and glucose, the color immediately changes from pale yellow to red. The red color originates from formation of tris(1,10-phenanthroline)iron(II) complex ([FeII(phen)3]2+). Differential pulse voltammetry indicates that cationic, mixed-ligand complexes of [Fe(acac)3-n-(phen)n]n+ are formed upon mixing the labile FeIII(acac)3 complex and phenanthroline. The cationic mixed-ligand complexes electrostatically bind to GOD (pI 4.2), and are easily reduced by electron transfer from GODred. This electron transfer is not affected by the presence of oxygen. The reduced complex [FeII(acac)3-n(phen)n](n-1)+ then undergoes rapid ligand exchange to FeII (phen)3. Formation of the colored FeII complex is repressed when the salt concentration in the mixture is increased, or when anionic bathophenanthroline disulfonate (BPS) is employed in place of phenanthroline. The use of labile metal complexes as electron acceptors would be widely applicable to the design of new biochromic detection systems.     

Enzymatic deposition of Au nanoparticles on the designed electrode surface and its application in glucose detection

This paper reported the enzymatic deposition of Au nanoparticles (AuNPs) on the designed 3-mercapto-propionic acid/glucose oxidase/chitosan (MPA/GOD/Chit) modified glassy carbon electrode and its application in glucose detection. Chit served as GOD immobilization matrix and interacted with MPA through electrostatic attraction. AuNPs, without nano-seeds presented on the electrode surface, was produced through the glucose oxidase catalyzed oxidation of glucose. The mechanism of production of AuNPs was confirmed to be that enzymatic reaction products H(2)O(2) in the solution reduce gold complex to AuNPs. The characterizations of the electrode modified after each assembly step was investigated by cyclic voltammetry and electrochemical impedance spectroscopy. Scanning electron microscopy showed the average particle size of the AuNPs is 40nm with a narrow particle size distribution. The content of AuNPs on the electrode surfaces was measured by differential pulse stripping voltammetry. The electrochemical signals on voltammogram showed a linear increase with the glucose concentration in the range of 0.010-0.12mM with a detection limit of 4μM. This provided a method to the determination of glucose.     

环糊精聚合物与苯醌的分子包合作用及其在酶电极中的应用

研究了水溶性环糊精预聚合物的存在对苯醌/氢醌体系在铂电极上氧化还原行为的影响, 根据伏安曲线讨论了该预聚合物与苯醌的分子包合作用。环糊精预聚合物与戊二醛缩聚反应而形成的不溶性聚合物膜用于葡萄糖氧化酶的固定化, 以制得新型的第二代葡萄糖电极。由于分子包合作用, 作为电子受体的苯醌在含酶的环糊精聚合物膜中具有较高的浓度, 从而加速了固定化酶的电子传递。测定了酶电极上BQ反应的动力学参数。     

Nafion coating the ferrocenylalkanethiol and encapsulated glucose oxidase electrode for amperometric glucose detection

This paper describes the fabrication and application of a complex electrode--Nafion film coating ferrocenylalkanethiol (FcC(11)SH) and encapsulated glucose oxidase (GOD) on a gold electrode. FcC(11)SH is employed as a mediator enabling the electron transfer between GOD and the electrode, GOD is encapsulated in polyacrylamide gel to improve the stability of the enzyme, and the Nafion film is coated on the modified electrode to eliminate interferents such as ascorbic acid, uric acid and acetaminophen in amperometric glucose detection. It is noticed that such a complex electrode exhibits excellent catalytic activity for glucose oxidation, and preserves the native structure of GOD and therefore its enzymatic activity. The encapsulated GOD retains more than 80% of its original biocatalytic activity even after 24 days, much longer than that of naked GOD molecules attached directly to the electrode. The oxidation peak current at the modified electrode shows a linear relationship with the glucose concentration in the range from 0.05 to 20 mM with a detection limit of 2.4 μM. In addition, the electrode displays a rapid response and good reproducibility for glucose detection, and has been successfully employed for glucose detection in blood plasma samples.     

Biocomposites of covalently linked glucose oxidase on carbon nanotubes for glucose biosensor

The formation of covalently linked composites of multi–walled carbon nanotubes (MWCNT) and glucose oxidase (GOD) with high-function density for use as a biosensing interface is described. The reaction intermediates and the final product were characterized by using FT–IR spectroscopy, and the MWCNT-coated GOD nanocomposites were examined by atomic force microscopy (AFM) and transmission electron microscopy (TEM). Interestingly, it was found that the GOD–MWCNT composites are highly water soluble. Electrochemical characterization of the GOD–MWCNT composites that were modified on a glassy carbon electrode shows that the covalently linked GOD retains its bioactivity and can specifically catalyze the oxidation of glucose. The oxidation current shows a linear dependence on the glucose concentration in the solution in the range of 0.5–40 mM with a detection limit of 30 μM and a detection sensitivity of 11.3 μA/mMcm². The present method may provide a way to synthesize MWCNT related composites with other biomolecules and for the construction of enzymatic reaction-based biofuel cells and biosensors. Supported by grants from the National Natural Science Foundation of China (NSFC, No. 20125515; 90206037; 20375016) and the Natural Science Foundation of Jiangsu Province (Grant No. BK 2004210)     

A novel amperometric biosensor based on gold nanoparticles-mesoporous silica composite for biosensing glucose

We report a novel bienzyme biosensor based on the assembly of the glucose oxidase (GOD) and horseradish peroxidase (HRP) onto the gold nanoparticles encapsulated mesoporous silica SBA-15 composite (AuNPs-SBA-15). Electrochemical behavior of the bienzyme bioconjugates biosensor is studied by cyclic voltammetry and electrochemical impedance spectroscopy. The results indicate that the presence of mesoporous AuNPs-SBA-15 greatly enhanced the protein loadings, accelerated interfacial electron transfer of HRP and the electroconducting surface, resulting in the realization of direct electrochemistry of HRP. Owing to the electrocatalytic effect of AuNPs-SBA-15 composite, the biosensor exhibits a sensitive response to H₂O₂ generated from enzymatic reactions. Thus the bienzyme biosensor could be used for the detection of glucose without the addition of any mediator. The detection limit of glucose was 0.5 μM with a linear range from 1 to 48 μM. Supported by the National Natural Science Foundation of China (Grant Nos. 20635020 & 90606016)     

A glucose biosensor based on chitosan-Prussian blue-multiwall carbon nanotubes-hollow PtCo nanochains formed by one-step electrodeposition

In this paper, a simple one-step electrodeposition method is described to fabricate chitosan-Prussian blue-multiwall carbon nanotubes-hollow PtCo nanochains (CS-PB-MWNTs-H-PtCo) film onto the gold electrode surface, then glucose oxidase (GOD) and Nafion were modified onto the film subsequently to fabricate a glucose biosensor. The morphologies and electrochemistry of the composite were investigated by using Fourier transform infrared (FTIR) spectrometry, scanning electron microscopy (SEM) and electrochemical techniques including cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), respectively. The performances of the biosensor have been investigated by chronoamperometry method under the optimized conditions. This biosensor showed a linear response to glucose range from 1.5 μM to 1.12 mM with a detection limit of 0.47 μM (S/N=3), a high sensitivity of 23.4 μA mM(-1) cm(-2), and a fast response time. The apparent Michaelis-Menten constant (K(M)(app)) was 1.89 mM. In addition, the biosensor also exhibited strong anti-interference ability, excellent stability and good reproducibility.     

Kinetic study of the thermal inactivation of glucose oxidase in the presence of denaturant and stabilizer by means of bioelectrocatalysis method

The thermal inactivation of glucose oxidase (GOD) in aqueous solution has been studied by the electrochemical method to follow the bioelectrocatalytic current due to the oxidation of glucose by GOD. Exponential time-dependent decrease in bioelectrocatalytic current, that is, the decrease in the enzymatic activity of GOD, was observed at given temperatures to determine the rate constant (k) of a simple inactivation process: GOD (active) → GOD (inactive). The ln[k] vs. T(-1) plots gave straight lines with all solution conditions tested, so that the resulting Arrhenius activation parameters including ΔH(?) and ΔS(?) can be compared with each other. In the 50 mmol/L phosphate buffer at 70°C, k was determined to be (6.6 ± 1.6)× 10(-4) s(-1), and ΔH(?) and ΔS(?) were calculated to be 202 ± 13 kJ mol(-1) and 282 ± 39 J K(-1) mol(-1), respectively. By addition of 3 mol/L guanidine hydrochloride, the k was increased to (4.7 ± 0.6)× 10(-3) s(-1), indicating that the denaturant accelerates the thermal inactivation. In this case, ΔH(?) was significantly reduced. By addition of 1 g/L ε-poly-L-lysine, which may adsorb onto the GOD surface to reduce the local disorder, k was decreased to (1.8 ± 0.6)× 10(-4) s(-1). In this case, ΔS(?) was reduced but ΔH(?) was not decreased much. This can be used as an important indication for selection of the enzyme stabilizer in solution.     

Adsorption of glucose oxidase onto plasma-polymerized film characterized by atomic force microscopy, quartz crystal microbalance, and electrochemical measurement

Adsorption of glucose oxidase (GOD) onto plasma-polymerized thin films (PPF) with nanoscale thickness was characterized by atomic force microscopy (AFM), quartz crystal microbalance (QCM), and electrochemical measurements. The PPF surface is very flat (less than 1-nm roughness), and its properties (charge and wettability) can be easily changed while retaining the backbone structure. We focused on three types of surfaces: (1) the pristine surface of hexamethyldisiloxane (HMDS) PPF (hydrophobic and neutral surface), (2) an HMDS PPF surface with nitrogen-plasma treatment (hydrophilic and positive-charged surface), and (3) an HMDS PPF surface treated with oxygen plasma (hydrophilic and negative-charged surface). The AFM image showed that the GOD molecules were densely adsorbed onto surface 2 and that individual GOD molecules could be observed. The longer axis of GOD ellipsoid molecules were aligned parallel to the surface, called the "lying position", because of electrostatic association. On surface 1, clusters of GOD molecules did not completely cover the original PPF surface (surface coverage was ca. 60%). The 10-nm-size step height between the GOD clusters and the PPF surface suggests that the longer axes of individual GOD molecules were aligned perpendicular to the surface, called the "standing position". On surface 3, only a few of the GOD molecules were adsorbed because of electrostatic repulsion. These results indicate that the plasma polymerization process can facilitate enhancement or reduction of protein adsorption. The AFM images show a corresponding tendency with the QCM profiles. The QCM data indicate that the adsorption behavior obeys the Langmuir isotherm equation. The amperometric biosensor characteristics of the GOD-adsorbed PPF on a platinum electrode showed an increment in the current because of enzymatic reaction with glucose addition, indicating that enzyme activity was mostly retained in spite of irreversible adsorption.     

Preparation of the glucose sensor based on three-dimensional ordered macroporous gold film and room temperature ionic liquid

A novel type of glucose sensor was fabricated based on a glucose oxidase (GOD)-N,N-dimethtylformamide (DMF)-[BMIm][BF₄] composites modified three-dimensional ordered macroporous (3DOM) gold film electrode. The immobilized GOD exhibits a pair of well-defined reversible peaks in 50 mM pH 7.0 phosphate buffer solutions (PBS), which could be attributed to the redox of flavin adenine dinucleotide (FAD) in GOD. The research results show that ionic liquid ([BMIm][BF₄]), DMF and 3DOM gold film are crucial for GOD to exhibit a pair of stable and reversible peaks. It is believed that the large active area of 3DOM gold film can increase the amount of immobilized GOD. Simultaneously, the application of IL enhances the stability of GOD and facilitates the electron transfer between GOD and the electrode. The synergetic effect of DMF can help the GOD to maintain its bioactivity better. GOD immobilized on the electrode exhibits the favorable electrocatalytic property to glucose, and the prepared sensor has a linear range from 10 to 125 nM with a detection limit of 3.3 nM at a signal-to-noise ratio of 3σ. The apparent K _m (Michaelis- Menten constant) for the enzymatic reaction is 0.018 mM.     

Development of glucose amperometric biosensor based on a novel attractive enzyme immobilization matrix: amino derivative of thiacalix[4]arene

Calixarenes and their derivatives may be a promising material for enzyme immobilization owing to their particular configuration, unique molecule recognition function and aggregation properties. In this paper, p-tert-butylthiacalix[4]arene tetra-amine (TC4TA) was first used as enzyme immobilization material. This attractive material was exploited for the mild immobilization of glucose oxidase (GOD) to develop glucose amperometric biosensor. GOD was strongly adsorbed on the TC4TA modified electrode to form TC4TA/GOD composite membrane. The adsorption mechanism was driven from the covalent bond between amino-group of TC4TA and carboxyl group of GOD and molecule recognition function of TC4TA. Amperometric detection of glucose was evaluated by holding the modified electrode at 0.60 V (versus SCE) to oxidize the hydrogen peroxide generated by the enzymatic reaction. The sensor (TC4TA/GOD) showed a relative fast response (response time was about 5 s), low detection limit (20 μM, S/N = 3), and high sensitivity (ca. 10.2 mA M⁻¹ cm⁻²) with a linear range of 0.08–10 mM of glucose, as well as a good operational and storage stability. In addition, optimization of the biosensor construction, the effects of the applied potential as well as common interfering compounds on the amperometric response of the sensor were investigated and discussed herein.     

Glucose oxidase/colloidal gold nanoparticles immobilized in Nafion film on glassy carbon electrode: Direct electron transfer and electrocatalysis

The direct electron transfer of glucose oxidase (GOD) was achieved based on the immobilization of GOD/colloidal gold nanoparticles on a glassy carbon electrode by a Nafion film. The immobilized GOD displayed a pair of well-defined and nearly reversible redox peaks with a formal potential (Eo ') of -0.434 V in 0.1 M pH 7.0 phosphate buffer solution and the response showed a surface-controlled electrode process. The dependence of Eo ' on solution pH indicated that the direct electron transfer reaction of GOD was a two-electron-transfer coupled with a two-proton-transfer reaction process. The experimental results also demonstrated that the immobilized GOD retained its electrocatalytic activity for the oxidation of glucose. So the resulting modified electrode can be used as a biosensor for detecting glucose.     

Alginate beads containing pH-sensitive liposomes and glucose oxidase: glucose-sensitive release

Egg PC (EPC) liposomes bearing a copolymer of N-isopropylacrylamide, methacrylic acid, and octadecylacrylate (P(NIPAM-co-MAA-co-ODA)) were prepared as pH-sensitive liposomes. They were embedded in glucose oxidase (GOD)-immobilized alginate beads. The ratio of EPC/GOD/alginate in the beads was 7.8:1.0:140.4, and the beads were added to glucose solutions so that the concentration of GOD was 0.0068 mg/ml. The enzymatic activity of the immobilized GOD was one fifth to half of that of native enzyme. As the glucose concentration increased from 0 to 400 mg/dl, the degree of calcein release increased from 17% to 75%. The acidification induced by the enzymatic reaction would be responsible for the glucose-triggered release.     

Bienzymatic amperometric biosensor for glucose based on polypyrrole/ceramic carbon as electrode material

A novel amperometric biosensor utilizing two enzymes, glucose oxidase (GOD) and horseradish peroxidase (HRP), was developed for the cathodic detection of glucose. The glucose biosensor was constructed by electrochemical formation of a polypyrrole (PPy) membrane in the presence of GOD on the surface of a HRP-modified sol-gel derived-mediated ceramic carbon electrode. Ferrocenecarboxylic acid (FCA) was used as mediator to transfer electron between enzyme and electrode. In the hetero-bilayer configuration of electrode, all enzymes were well immobilized in electrode matrices and showed favorable enzymatic activities. The amperometric detection of glucose was carried out at +0.16 V (versus saturated calomel reference electrode (SCE)) in 0.1 M phosphate buffer solution (pH 6.9) with a linear response range between 8.0×10⁻⁵ and 1.3×10⁻³ M glucose. The biosensor showed a good suppression of interference in the amperometric detection.     

Direct electrochemistry of glucose oxidase immobilized on a hexagonal mesoporous silica-MCM-41 matrix

The direct electrochemistry of glucose oxidase (GOD) immobilized on a hexagonal mesoporous silica modified glassy carbon electrode was investigated. The adsorbed GOD displayed a pair of redox peaks with a formal potential of -417 mV in 0.1 M pH 6.1 phosphate buffer solution (PBS). The response showed a diffusion-controlled electrode process with a two-electron transfer coupled with a two-proton transfer reaction process. GOD immobilized on a hexagonal mesoporous silica retained its bioactivity and stability. In addition, the immobilized GOD could electrocatalyze the oxidation of glucose to gluconlactone by taking ferrocene monocarboxylic acid (FMCA) as a mediator in N(2) saturated solutions, indicating that the electrode may have the potential application in biosensors to analyze glucose. The sensor could exclude the interference of commonly coexisted uric acid, p-acetaminophenol and ascorbic acid and diagnose diabetes very fast and sensitively. This work demonstrated that the mesoporous silica provided a novel matrix for protein immobilization and the construction of biosensors.     

基于室温离子液体的有序多孔金膜葡萄糖传感器

将1-丁基-3-甲基咪唑四氟硼酸盐（[BMIm][BF4]）、N,N-二甲基甲酰胺（DMF）与葡萄糖氧化酶（GOD）的混合物修饰于三维有序大孔（3DOM）金膜电极上,构建了一种新型的葡萄糖传感器．固定的GOD在pH7．0的磷酸缓冲液（PBS）中展现出一对可逆性好的氧化还原峰,这归因于GOD的活性中心黄素腺嘌呤二核苷酸（FAD）的直接电化学行为．研究表明,离子液体（IL）、DMF以及3DOM金膜对GOD的直接电化学都起到了重要的作用．3DOM金膜修饰电极作为基底提高了酶的负载量,加速了GOD与电极表面的电子传递;IL的应用增加了固定GOD的电化学活性;DMF与IL、GOD的协同作用更好地保持了GOD的生物活性．固定在电极表面的GOD对葡萄糖显示出良好的催化性能,其检测线性范围为10～125nmol／L,检测限为3．3nmol／L（S／N=3）,酶催化反应的表观米氏常数Km为0．018mmol／L．     

表面可更新的石墨陶瓷葡萄糖生物传感器研究

A surface-renewable glucose biosensor is reported. The glucose biosensor is developed using glucose oxidase (GOD) encapsulated in organically modified solgel glass (ORMOSIL) network in the composite matetial. The organic group in the ORMOSIL network controls the hydrophobicity of the electrode surface and thus limits the wettability of the electrode surface. The graphite powder provides the conductivity for the electrode.Ferrocenecarboxylic acid in phosphate buffer solution (pH 7.0) transfers electron between enzyme and electrode. Cyclic volammetry and amperometric measurements have been used to exmine the electrochemical behavior of glucose biosensor as shown in Fig. 1 and Fig.2. The electrode gives a linear response range of 1 -20mM glucose with a sensitivity of 3.26 μA· mM-1. The electrode can be renewed easily in reproducible manner by a simple polishing step.     

Photochemical immobilization of protein on the inner wall of a microchannel and Its application in a glucose sensor

A new protein immobilization technique has been developed for patterning enzymes in a specific position inside a microchannel. First, bovine serum albumin (BSA) was adsorbed onto the internal surface of a polydimethylsiloxane microchannel. The microchannel was then filled with the conjugate solution of a photoreactive cross-linker, 4-azido-2,3,5,6-tetrafluorobenzoic acid succinimidyl ester (ATFB-SE), and an enzyme, horseradish peroxidase (HRP). An irradiation by a He-Cd laser activated the azido group of the conjugates and these conjugates became covalently attached to the adsorbed BSA on the microchannel. The enzyme turnover was observed from only the HRP zone. This technique was successfully applied to the enzymatic glucose sensor. Glucose oxidase (GOD) and HRP were sequentially patterned in a single microchannel, i.e., the HRP zone was located downstream from the GOD zone. The calibration curve of a glucose standard solution was linear over the range of 0-128 μM with a correlation coefficient of 0.993. Compared to the traditional method using a 96-well microtiter plate, the present technique on the microchip shortened the reaction time from 30 min to 4.8 s, i.e., to 1/375.